Experimental Analyses of Flow Pattern and Heat Transfer in a Horizontally Oriented Polymer Pulsating Heat Pipe withMerged Liquid Slugs

Extended experiments were conducted on the oscillation characteristics of merged liquid slugs in a horizontally oriented polymer pulsating heat pipe(PHP).The PHP’s serpentine channel comprised 14 parallel channels with a width of 1.3 mm and a height of 1.1 mm.The evaporator and condenser sections were 25 and 50 mm long,respectively,and the adiabatic section in between was 75mmlong.Using a plastic 3D printer and semi-transparent filament made from acrylonitrile butadiene styrene,the serpentine channel was printed directly onto a thin polycarbonate sheet to form the PHP.The PHP was charged with hydrofluoroether-7100.In the experiments,the evaporator section was heated,and the condenser section was cooled using high-temperature and low-temperature thermostatic baths,respectively.Flow patterns of the working fluid were obtained with temperature distributions of the PHP.A mathematical model was developed to analyze the flow patterns.Themerged liquid slugs were observed in every two channels,and their oscillation characteristics were found to be approximately the same in time and space.It was also found that the oscillations of the merged liquid slugs became slower,but the heat transfer rate of the PHP increased with a decrease in the filling ratio of the working fluid.This is because vapor condensation was enhanced in vapor plugs as the filling ratio decreased.However,the filling ratio had a lower limit,and the heat transfer rate was maximum when the filling ratio was 40.6%in the present experimental range.

A low-cost invasive microwave ablation antenna with a directional heating pattern

Microwave ablation(MWA) is a cancer treatment method. The tumor tissue absorbs electromagnetic energy, which heats and kills it. A microwave ablation antenna plays a critical role in this process. Its radiation field must completely cover the tumor but not the healthy tissue. At present, the radiation pattern of most invasive ablation antennas is spherical.However, in the clinic, the shape of some tumors may be asymmetrical or the antenna cannot be inserted into the center of the tumor for some other reason. In order to solve these problems, a directional heating antenna for microwave ablation is proposed in this paper. The proposed antenna, operating at 2.45 GHz, consists of a monopole and a reflector. The feed is given by a substrate integrated coaxial line(SICL) and coplanar waveguide(CPW). The omnidirectional radiation field of the monopole is reflected by a reflector that is extended from the outer conductors of the SICL to form a directional radiation field. The impedance matching network is designed on SICL to match the antenna to 50 Ω. The antenna is fabricated using a mature printed circuit board(PCB). The reflection coefficient of the antenna in porcine liver tissue measured by a vector network analyzer shows good agreement with the simulations. Then, an ablation experiment in porcine liver is conducted with power of 10 W for 10 min, and the experimental results confirm the validity of the design.

Simulation Study of Heat Flux Deposition Pattern on the Surface of HT-7 Toroidal Limiters

The heat flux deposition pattern on the toroidal limiters installed in HT-7 was simulated with ANSYS code. The simulation model was established with the ripple of the magnetic field. The heat deposition pattern and temperature distribution on the surface of the toroidal linfiters were obtained. A comparison of the results obtained with and without the shaped tiles, used to reduce the heat flux on the leading edge of the limiters, was made. The maximum heat load allowed at the leading edge was about 1.8 MW/m2 because of the poor power removing capacity on the ends of the limiters. This approach can also be applied to other devices with a limiter configuration in a circular cross-section shape.

Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles

The heat transfer of hydrocarbon refrigerant across tube bundles have been widely used in refrigeration.Three-dimensional simulation model using volume of fluid(VOF) was presented to study the effects of tube shapes on flow pattern, film thickness and heat transfer of n-pentane across tube bundles, including circle, ellipse-shaped, egg-shaped and cam-shaped tube bundles. Simulation results agree well with experimental data in the literature. The liquid film thickness of sheet flow and heat transfer for different tube shapes were obtained numerically. The flow pattern transition occurs lower vapor quality for ellipse-shaped tube than other tube shapes. For sheet flow, the liquid film on circle tube and ellipseshaped tube is symmetrically distributed along the circumferential direction. However, the liquid film on egg-shaped tube at circumferential angles(θ) = 15°–60° is thicker than θ = 135°–165°. The liquid film on cam tube at θ = 15°–60° is slightly thinner than θ = 135°–165°. The liquid film thickness varies from thinner to thicker for ellipse-shaped, cam-shaped, egg-shape and circle within θ = 15°–60°. The effect of tube shape is insignificant on thin liquid film thickness. Ellipse-shaped tube has largest heat transfer coefficient for sheet flow. In practical engineering, the tube shape could be designed as ellipse to promote heat transfer.

Hydrodynamic Pattern Investigation of Ethanol Droplet Train Impingement on Heated Aluminum Surface

Steady-state hydrodynamic patterns of ethanol droplet train impingement on the heated aluminum surface is investigated in the surface temperature range of 80°C–260°C using two different Weber numbers(We)of 618 and 792.Instead of a vertical train impingement,the droplet train is sent to the aluminum surface with an incline of 63 degrees.Changes in the spreading length are observed at different surface temperatures for two different We values,which are obtained by using two different pinholes with 100 and 150μm diameters.The greatest spreading length is seen at the lowest surface temperature(80°C)and it continuously decreases until the surface temperature of 200°C.Above 200°C,the spreading length remains stable which is most probably because of the Leidenfrost effect.The spreading lengths of the experiments with 100μm are 46.4%smaller than the experiments with 150μm.Also,splashing angles are observed for both We values.The ranges of splashing angle observations are 140°C–200°C and 170°C–185°C for We values of 792 and 618,respectively.

Metabolomics characterization of Qingwei San on oral ulcer in db/db mice with stomach heat pattern

Objective:To characterize the effects of Qingwei San(QWS)on diabetic oral ulcer(OU)mice with stomach heat pattern through metabolomic analysis.Methods:A stomach heat pattern mouse model was established by treating C57BLKS/J Leprdb/db(db/db)mice with dried Zingiber officinale Rosc.rhizome(Z.officinale,Gan Jiang)decoction by gavage.All model mice had blood glucose levels of≥11.1 m M.Subsequently,OU was induced by Na OH cauterization.After 1 week of administration of QWS,non-targeted metabolomic analysis of serum was conducted using ultra high performance liquid chromatography coupled with mass spectrometry(UHPLC-MS/MS).Results:The non-targeted metabolomics results indicated that tryptophan metabolism,2-oxocarboxylic acid metabolism,serotonergic synapses,amino sugar and nucleotide sugar metabolism,and amino acid biosynthesis were involved in the therapeutic effects of QWS,with tryptophan metabolism playing a predominant role.Conclusion:QWS treatment can significantly improve the pathological status of diabetic OU mice with stomach heat pattern.QWS may regulate the release of inflammatory factors through the tryptophan metabolism pathway.

The Rossby wave train patterns forced by shallower and deeper Tibetan Plateau atmospheric heat-source in summer in a linear baroclinic model

By using a linear baroclinic model(LBM),this study investigates the different Rossby wave train(RWT)patterns associated with the Tibetan Plateau(TP)upper-atmospheric heat source(TPUHS)that is anomalously shallower and deeper in boreal summer.Observational results indicate the different RWT patterns between the developing and decaying periods of synoptic TPUHS events,when the anomalous TPUHS develops from a relatively shallower to a deeper TP heat source.Based on the different vertical heating profiles between these two periods in observation,this study forces the LBM with prescribed TPUHS profiles to mimic a shallower and deeper summer TP heat source.The results show that the atmospheric responses to a shallower and deeper TPUHS do exhibit different RWT patterns that largely resemble those in observation.Namely,corresponding RWT pattern to a shallower TPUHS stretches from the TP to the west coast of America,while that to a deeper TPUHS extends from the TP region to Alaska.

The Morphology of Patterning with Pseudoplastic Metal Nanoparticle Fluids during Heat Treatment

A pseudoplastic metal nanoparticle fluid （PMNF） is used in nanoimprint to fabricate semiconductors and func- tional devices. The evaporation of the solvent and the sintering of the Au PMNF are investigated. The key parameters, which influence the morphology of patterning, such as the radius of metal particles, the concentra- tion of metal particles, the Hamaker constant of the solvent, viscosity of the fluids and the evaporation velocity, are analyzed. Based on a two-sphere sintering model, the equations are derived, which represent the relationships between the relative shrinkage and radius of the metal particles, sintering temperature and time. The optimal parameters for the heat treatment are provided in nanoimprint.

Research on heat dissipation characteristics of magnetic fluid bearings under multiple field coupling effects

This paper analyzes the sources of heat losses in magnetic fluid bearings,proposes various cou-pling relationships of physical fields,divides the coupled heat transfer surfaces while ensuring the continuity of heat flux density,and analyzes the overall heat dissipation pathways of the bearings.By changing parameters such as input current,rotor speed,and inlet oil flow rate,the study applies a multi-physics field coupling method to investigate the influence of different parameters on the temper-ature field and heat dissipation patterns of the bearings,which is then validated through experi-ments.This research provides a theoretical basis for the optimal design of magnetic fluid bearing sys-tems.

Numerical modeling and parametric sensitivity analysis of heat transfer and two-phase oil and water flow characteristics in horizontal and inclined flowlines using OpenFOAM

Estimating the oil-water temperatures in flowlines is challenging especially in deepwater and ultra-deepwater offshore applications where issues of flow assurance and dramatic heat transfer are likely to occur due to the temperature difference between the fluids and the surroundings. Heat transfer analysis is very important for the prediction and prevention of deposits in oil and water flowlines, which could impede the flow and give rise to huge financial losses. Therefore, a 3D mathematical model of oil-water Newtonian flow under non-isothermal conditions is established to explore the complex mechanisms of the two-phase oil-water transportation and heat transfer in different flowline inclinations. In this work, a non-isothermal two-phase flow model is first modified and then implemented in the InterFoam solver by introducing the energy equation using OpenFOAM® code. The Low Reynolds Number (LRN) k-ε turbulence model is utilized to resolve the turbulence phenomena within the oil and water mixtures. The flow patterns and the local heat transfer coefficients (HTC) for two-phase oil-water flow at different flowlines inclinations (0°, +4°, +7°) are validated by the experimental literature results and the relative errors are also compared. Global sensitivity analysis is then conducted to determine the effect of the different parameters on the performance of the produced two-phase hydrocarbon systems for effective subsea fluid transportation. Thereafter, HTC and flow patterns for oil-water flows at downward inclinations of 4°, and 7° can be predicted by the models. The velocity distribution, pressure gradient, liquid holdup, and temperature variation at the flowline cross-sections are simulated and analyzed in detail. Consequently, the numerical model can be generally applied to compute the global properties of the fluid and other operating parameters that are beneficial in the management of two-phase oil-water transportation.

Predicting Surface Urban Heat Island in Meihekou City, China: A Combination Method of Monte Carlo and Random Forest

Given the rapid urbanization worldwide, Urban Heat Island(UHI) effect has been a severe issue limiting urban sustainability in both large and small cities. In order to study the spatial pattern of Surface urban heat island(SUHI) in China’s Meihekou City, a combination method of Monte Carlo and Random Forest Regression(MC-RFR) is developed to construct the relationship between landscape pattern indices and Land Surface Temperature(LST). In this method, Monte Carlo acceptance-rejection sampling was added to the bootstrap layer of RFR to ensure the sensitivity of RFR to outliners of SUHI effect. The SHUI in 2030 was predicted by using this MC-RFR and the modeled future landscape pattern by Cellular Automata and Markov combination model(CA-Markov). Results reveal that forestland can greatly alleviate the impact of SUHI effect, while reasonable construction of urban land can also slow down the rising trend of SUHI. MC-RFR performs better for characterizing the relationship between landscape pattern and LST than single RFR or Linear Regression model. By 2030, the overall SUHI effect of Meihekou will be greatly enhanced, and the center of urban development will gradually shift to the central and western regions of the city. We suggest that urban designer and managers should concentrate vegetation and disperse built-up land to weaken the SUHI in the construction of new urban areas for its sustainability.

Visual Study on Flow and Operational Characteristics of Flat Plate Closed Loop Pulsating Heat Pipes

This paper presents an experimental study including visualization on a flat plate closed loop pulsating heat pipes.It consists of a total of 40 channels with square cross section(2 mm×2 mm,165 mm long) machined directly on an aluminum plate(180 mm×120 mm×3 mm) covered by a transparent plate.The working fluid employed is ethanol.As a result,various flow patterns and their transitions are observed and found to be related to the fluid fill ratio,input heat load and the device orientation.Also the operational characteristics and working mechanism are discussed.

Field synergy analysis of different flow patterns in falling-film dehumidification system with horizontal pipes

Effects of the flow pattern of intertubular liquid film on mass and heat transfer synergies in a falling-film dehumidification system with horizontal pipes are studied.A flow model of the dehumidifying solution between horizontal pipes is established using Fluent software,the rule of transitions of the flow pattern between pipes is studied,critical Reynolds numbers of flow pattern transitions are obtained,and the accuracy of the model is verified by experiments.The mass transfer synergy angle and heat transfer synergy angle are respectively used as evaluation criteria for the mass transfer synergy and heat transfer synergy,and distribution laws of the synergy angles for droplet,droplet columnar and curtain flow patterns are obtained.Simulation results show that the mass transfer synergy angles corresponding to droplet,droplet columnar and curtain flow patterns all rise to a plateau with time.The mean mass-transfer synergy angle is 98°for the droplet flow pattern,higher than 96.5°for the droplet columnar flow pattern and 95°for the curtain flow pattern.The results show that the mass transfer synergy of the droplet flow pattern is better than that of the droplet columnar flow pattern and that of the curtain flow pattern.

Exploring the spatiotemporal relationship between green infrastructure and urban heat island under multi‐source remote sensing imagery:A case study of Fuzhou City

Green Infrastructure(GI)has garnered increasing attention from various regions due to its potential to mitigate urban heat island(UHI),which has been exacerbated by global climate change.This study focuses on the central area of Fuzhou city,one of the“furnace”cities,and aims to explore the correlation between the GI pattern and land surface temperature(LST)in the spring and autumn seasons.The research adopts a multiscale approach,starting from the urban scale and using urban geographic spatial characteristics,multispectral remote sensing data,and morphological spatial pattern analysis(MSPA).Significant MSPA elements were tested and combined with LST to conduct a geographic weighted regression(GWR)experiment.The findings reveal that the UHI in the central area of Fuzhou city has a spatial characteristic of“high temperature in the middle and low temperature around,”which is coupled with a“central scattered and peripheral concentrated”distribution of GI.This suggests that remote sensing data can effectively be utilised for UHI inversion.Additionally,the study finds that the complexity of GI,whether from the perspective of the overall GI pattern or the classification study based on the proportion of the core area,has an impact on the alleviation of UHI in both seasons.In conclusion,this study underscores the importance of a reasonable layout of urban green infrastructure for mitigating UHI.

Modeling of Heat Transfer and Steam Condensation Inside a Horizontal Flattened Tube

This work investigates the steam condensation phenomena in an air-cooled condenser.The considered horizontal flattened tube has a 30 mm hydraulic diameter,and its length is a function of the steam quality with a limit value between 0.95 and 0.05.The mass flow rate ranges from 4 to 40 kg/m^(2).s with a saturated temperature spanning an interval from 40°C to 80°C.A special approach has been implemented using the Engineering Equation Solver(EES)to solve a series of equations for the two-phase flow pattern and the related heat transfer coefficients.A wavy-stratified structure of the two-phase flow has been found when the mass rate was between 4 and 24 kg/m^(2).s.In contrast,an initially annular flow is gradually converted into a wavy stratified flow(due to the condensation process taking place inside the flattened tube)when the considered range ranges from 32 to 40 kg/m^(2).s.

Analysis of Heat Transfer of a Flat Plate Oscillating Heat Pipe, for Different Surfaces

Recent and constant demands for greater power densities and smaller sizes of electronic systems have stimulated the growth of new designs of different passive heat transfer methods such as heat pipes. Particularly, OHPs （Oscillating Heat Pipes） are relatively novel devices, capable of removing high heat rates over long and short distances with not much temperature drop. This study concentrates on the design, building and assembling a test rig in order to analyse the flow pattern ofdeionised water through a 5 turns flat plate oscillating heat pipe under different heat inputs, which was made in the school of engineering and materials science of the Queen Mary University of London by two energy M.Sc. students. The filling ratio of the water is 40%. Furthermore an experimental study on the OHP thermal performance is carried out in order to examine the effects of different surface wet conditions： super hydrophilic, hydrophilic and cleaned brass. It is demonstrated the formation of liquid slugs and vapour plugs of the water along the channels. The experimental results showed that the hydrophilic surface tends to be more energy efficient. The heat transfer performance of the super-hydrophilic and hydrophilic is higher than brass by 5-12% and 15-20% respectively.

Experimental study on convective boiling heat transfer in narrow-gap annulus tubes

Since convective boiling or highly subcooled single-phase forced convection in micro-channels is an effective cooling mechanism with a wide range of applications, more experimental and theoretical studies are re- quired to explain and verify the forced convection heat transfer phenomenon in narrow channels. In this experimental study, we model the convective boiling behavior of water with low latent heat substance Freon 113 (R-113), with the purpose of saving power consumption and visualizing experiments. Both heat transfer and pressure drop characteris- tics were measured in subcooled and saturated concentric narrow gap forced convection boiling. Data were obtained to qualitatively identify the effects of gap size, pressure, flow rate and wall superheat on boiling regimes and the tran- sition between various regimes. Some significant differences from unconfined forced convection boiling were found, and also, the flow patterns in narrow vertical annulus tubes have been studied quantitatively.

水平管降膜换热器性能规律研究进展

水平管降膜换热器具有热质传递效率高、阻力小、结构简单等优点,被广泛应用于化工等传统领域及能源利用的节能减排领域。降膜换热器内部发生复杂的流动及传热传质相互耦合过程。介绍了实验及模拟研究手段的进展,综述了不同操作参数(气体温度、流向及流量,溶液流量、温度及浓度,内部媒介流量及温度等)与结构参数(管径、管间距等)对水平管降膜管间流型、液膜厚度与润湿性等流动特性的影响规律,以及对蒸发传热特性、吸收传热传质特性等换热器性能的影响规律,包括整体性能和局部微细特征,为水平管降膜换热器的性能优化提供理论支撑。指出在不同气流特征以及多因素相互作用下多维度的局部流动与传热传质性能的耦合影响规律以及强化换热手段会是水平管降膜换热器未来研究的重点方向。

葛根芩连汤通过IRS-1/PI3K/AKT通路对胃肠湿热型2型糖尿病大鼠糖脂代谢的影响

目的探究葛根芩连汤通过胰岛素受体底物-1(IRS-1)/磷脂酰肌醇3激酶(PI3K)/蛋白激酶B(AKT)通路对胃肠湿热型2型糖尿病大鼠糖脂代谢的影响。方法将40只SD大鼠随机分为正常组(2 mL生理盐水灌胃)、造模组(2 mL生理盐水灌胃)、二甲双胍组(4.17 mg/100 g二甲双胍灌胃)和葛根芩连汤组(1 g/100 g葛根芩连汤灌胃),每组10只。采用高脂高糖饲料加腹腔注射链脲佐菌素(STZ)构建2型糖尿病大鼠模型,随后喂食油脂、42°白酒及蜂蜜水构建胃肠湿热型2型糖尿病大鼠模型。测量各组大鼠不同时间节点体质量,血糖仪测定空腹血糖(FBG);ELISA检测空腹胰岛素(FINS)、三酰甘油(TG)、总胆固醇(TC)、白细胞介素-6(IL-6)、肿瘤坏死因子-α(TNF-α)水平变化、计算胰岛素抵抗指数(HOMA-IR);HE染色检测肝组织病理学变化;检测肝组织过氧化氢酶(CAT)、谷胱甘肽过氧化物酶(GSH-Px)、超氧化物歧化酶(SOD)及丙二醛(MDA)含量变化。Western blot检测肝组织IRS-1、PI3K、p-PI3K、AKT及p-AKT蛋白变化。结果与正常组比较,造模组大鼠体质量、FBG、FINS及HOMA-IR、GSH-Px、CAT、SOD、IRS-1、p-PI3K/PI3K及p-AKT/AKT水平均明显下降(P<0.05)、TG、TC、IL-6、TNF-α及MDA含量均显著升高(P<0.05),可见局灶性肝实质损失。与造模组比较,二甲双胍组及葛根芩连汤组大鼠体质量、FBG、FINS及HOMA-IR、GSH-Px、CAT、SOD、IRS-1、p-PI3K/PI3K及p-AKT/AKT水平均明显升高(P<0.05)、TG、TC、IL-6、TNF-α及MDA含量均显著降低(P<0.05),显示正常的肝实质。结论葛根芩连汤可明显改善胃肠湿热型2型糖尿病糖脂紊乱,可能是通过IRS-1/PI3K/AKT通路发挥作用。

华北赋煤区地热资源富集模式及开发利用方向

【目的】中国是煤炭大国,在煤炭行业迫切需要转型的形势下,研究赋煤区的地热资源成因与分布规律十分必要。华北赋煤区地热资源储量占全国的74.7%,是中国地热资源最富集的区域之一。区内分布有渤海湾盆地、鄂尔多斯盆地、沁水盆地和南华北盆地等主要含煤盆地,其岩石圈热状态自东向西逐步降低。地热储包括新生界砂岩孔隙型和寒武-奥陶系碳酸盐岩岩溶-裂隙型两大类型。碳酸盐岩岩溶-裂隙热储温度高、水量大、易于回灌,是煤田区地热勘查与开发利用的优先选择。【方法】针对煤田区地热地质的特点,开展地热系统动力学分析,优选华北赋煤区的地热勘查与开发区域。【结果和结论】提出煤田区有以下4种聚热模式:(1)煤层与碳酸盐岩地层储盖组合传导聚热;(2)基岩面起伏变化传导聚热;(3)断裂带地下水活动对流聚热;(4)碳酸盐岩基岩面风化壳岩溶以及侵入体接触面岩溶对流聚热。并结合实例进行数值模拟分析。在此基础上,指出华北赋煤区地热勘查与开发优先方向是深部碳酸盐岩储层中的地热资源。地热能作为非碳基能源之一,以其储量大、清洁、输出连续的特点,在未来社会对电力、燃料和热力三大能源需求中的热力供应方面尤其可以做出重要贡献,而中国地热与煤炭资源在空间分布上的重叠,使地热开发利用成为煤炭行业转型的有效途径之一。