New rare earth heat-resistant agent for silicone rubber came into being

Silicone rubber has been widely used in electricity,electronics,office equipment,automobile,construction,health,food and artificial organs attributed to its excellent properties of weather resistance,temperature resistance,electrical insulation,radiation resistance and biological inertia.Modern science and technology is striving for better heat resistance for silicone rubber in various fields,for example,the cabin temperature of the aircraft engine requires higher oil resistance and high temperature resistance of rubber parts due to its working temperature above300℃.

A review of ultra-high temperature heat-resistant energetic materials

Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed that the thermal stability can be enhanced by introducing amino groups to form intra/inter-molecular hydrogen bonds, constructing conjugate systems and designing symmetrical structures. This article aims to review the physical and chemical properties of ultra-high temperature heat-resistant energetic compounds and provide valuable theoretical insights for the preparation of ultra-high temperature heatresistant energetic materials. We also analyze the selected 20 heat-resistant energetic materials with decomposition temperatures higher than 350℃, serving as templates for the synthesis of various highperformance heat-resistant energetic materials.

Aging-induced memory loss due to decreased N1-acetyl-5-methoxykynuramine,a melatonin metabolite,in the hippocampus:a potential prophylactic agent for dementia

Melatonin(N-acetyl-5-methoxytryptamine)is known as the hormone of darkness because it is synthesized at night and involved in regulating the circadian clock.The hormone is primarily synthesized by the vertebrate pineal gland,but is ubiquitous among invertebrates,unicellular organisms,plants,and even cyanobacteria(Hattori and Suzuki,2024).Melatonin is well-conserved evolutionarily and possesses several physiological functions,such as immune response,bone and glucose metabolism,and memory formation besides regulating the circadian rhythm.

Microstructures and mechanical properties of Mg-Al-Sm series heat-resistant magnesium alloys

The microstructures and phase compositions of the as-cast and die-cast Mg-6.02Al-1.03 Sm, Mg-6.05Al-0.98Sm-0.56 Bi and Mg-5.95Al-1.01Sm-0.57 Zn alloys were investigated. Meanwhile, the tensile mechanical and flow properties were tested. The results show that the as-cast microstructure of Mg-6.02Al-1.03 Sm alloy is composed of δ-Mg matrix, discontinuous δ-Mg17Al12 phase and small block Al2 Sm phase with high thermal stability. Rod Mg3Bi2 phase precipitates when Bi is added, while the added metal Zn dissolves into δ-Mg matrix and δ-Mg17Al12 phase. The as-cast alloys exhibit the excellent tensile mechanical property. The tensile strength（δb） and elongation（δ） can reach 205-235 MPa and 8.5%-16.0% at ambient temperature, respectively. Meanwhile, they can also exceed 160 MPa and 14.0% at 423 K, respectively. The die-cast microstructures are refined obviously, and meanwhile the broken second phases distribute dispersedly. The die-cast alloys exhibit better tensile mechanical properties with the values of δb and δ of 240-285 MPa and 8.5%-16.5% at ambient temperature, respectively, and excellent flow property with the flow length of 1870-2420 mm. The die-cast tensile fractures at ambient temperature exhibit a typical character of ductile fracture.

基于Agent人工智能的异构网络多重覆盖节点入侵检测系统设计

异构网络具有结构复杂、多重覆盖面积大等特征,使得网络入侵检测较为隐蔽,威胁网络运行的安全性;为此,对基于Agent人工智能的异构网络多重覆盖节点入侵检测系统进行了研究;通过检测Agent和通信Agent装设主机Agent,以Cisco Stealthwatch流量传感器作为异构网络传感器检测攻击行为,采用STM32L151RDT664位微控制器传输批量数据,由MAX3232芯片实现系统电平转化,实现硬件系统设计;软件部分设计入侵检测标准,采用传感器设备捕获网络实时数据,通过Agent技术解析异构网络协议并提取数据运行特征,综合考虑协议解析结果及与检测标准匹配度,实现异构网络多重覆盖节点入侵检测;经实验测试表明,基于Agent人工智能的异构网络多重覆盖节点入侵检测系统入侵行为的漏检率和入侵类型误检率的平均值仅为6%和5%,能够有效提高检测精度,减小检测误差。

流程型生产安全数据流的多Agent节点协同分流优化方法

为实现流程型生产安全监测系统的及时、准确决策,结合数据流采集与隐患识别过程,分析非关键数据的冗余、关键数据的缺失和数据计算时延较大的问题,提出基于多Agent的流程型生产安全数据流网络分流调度规划方法和节点流量划分识别机制。研究结果表明:相较于分簇传输方法,数据流网络分流调度方法可以实现关键隐患数据更高的传输成功率;相较于常规的复杂事件处理方法,本文提出的流量划分识别机制在2种类型数据集上实现隐患事件识别均有更低的计算时延。研究结果可为流程行业安全生产数字化管控模式和数据高质量获取提供参考。

Agent视域下的人工智能赋能作战系统

针对作战系统的智能化设计问题,提出了基于Agent的人工智能技术概念框架和应用方法。首先,阐述了Agent概念,讨论了在作战系统中研究Agent的重要意义。然后,介绍了基于Agent的人工智能研究框架,列举了Agent在作战系统中的多种应用方式。最后,分析了Agent技术发展趋势及其作战应用可能面临的风险与挑战。

基于AI agent的6G内生智能技术框架及其应用

未来6G网络将内生支持通信和AI一体化服务,赋能丰富多彩的新业务,支撑社会高效可持续发展。为此,借鉴了IT行业AI Agent的应用范式,基于电信应用场景创新地提出了6G AI Agent技术框架的三大设计理念,包括多模型融合、定制化Agent和插件式环境交互,并基于该理念构建了6G AI Agent技术框架。通过环境交互层、Agent引擎层、模型调度层、模型基座层交互协同,实现了自主环境感知、自主任务生成和自主执行任务的能力。此外,以移动网络的智能感知任务为例,探索了AI Agent的使用场景及价值,为AI新技术在电信领域发展提供了新的思路和技术支撑。

基于免疫Agent的电力电缆线路故障检测系统

为区别故障信号、非故障信号,实现对电缆线路故障的准确检测,设计了基于免疫Agent的电力电缆线路故障检测系统。利用前端检测电路为故障分析模块、测距方式切换模块提供电量传输信号,完成系统前端检测装置的连接。按照免疫Agent检测原理提取电力电缆线路故障信号的特征,联合已获取信号对象,求解检测插值指标的具体数值。结合各级硬件设备结构,完成系统设计。实验结果表明,该系统可同时检测波频为10~20 Hz、40~50 Hz、60~70 Hz的故障信号与波频为20~30 Hz、30~40 Hz、50~60 Hz的非故障信号,可以在精准辨别故障与非故障信号的同时,实现对电力电缆线路故障的准确检测。

基于多Agent的服装可持续消费行为建模与仿真

“双碳”目标下,随着服装消费引起的气候变化和环境污染等生态问题日益严重,迫切需要重新思考和重塑服装消费模式,推动服装消费向质量型、低碳化转变,从而实现服装产业的绿色转型。文章运用多Agent建模方法,构建服装可持续消费行为仿真模型,采用Netlogo平台进行仿真实验,探求服装可持续消费行为的影响机理。结果表明,消费者可持续消费认知、产品可持续性和设施供应条件均显著促进可持续消费行为;但不同强度下,产品可持续性和设施供应条件的推动作用存在差异。基于此,从可持续消费认知和供应条件两方面提出了引导中国消费者服装可持续消费行为的建议和对策。

基于多Agent深度强化学习的无人机协作规划方法

人机协作控制是多无人机任务规划的重要方式。考虑多无人机任务环境协同解释和策略控制一致性需求,提出基于多Agent深度强化学习的无人机协作规划方法。依据任务知识和行为状态,构建基于任务分配Agent的任务规划器,生成人机交互的相互依赖关系;设计一种深度学习强化方法,解决群体行为最优策略和协同控制方法,并利用混合主动行为选择机制评估学习策略。实验结果表明:作为人机交互实例,所提方法通过深度强化学习使群体全局联合动作表现较好,学习速度和稳定性均能优于确定性策略梯度方法。同时,在跟随、自主和混合主动3种模式比较下,可以较好地控制无人机飞行路径和任务,为无人机集群任务执行提供了智能决策依据。

一种基于Agent的任务自生成方法

任务自生成是基于预先设定的业务工作流完成任务执行流程制定的一个过程,任务执行流程制定主要包括任务执行步骤选取与任务执行步骤相应的解决方案选取。提出一种基于Agent的任务自生成方法来解决基于传统的业务工作流的流程制定机制,在面对有差异性需求的不同任务时,因其不能做出任务执行流程制定的自适应性改变而在处理任务时出现处理速度慢、结果不准确等问题。利用Agent的环境感知能力实现对任务需求信息和任务自生成系统环境的感知,利用Agent的自主行为决策能力结合感知的信息实现对任务执行流程制定工作的自主管理,在真实应用场景测试中,通过一系列比较实验验证了这种方法在处理速度和准确度方面具有明显优势。

基于Multi-Agent的无人机集群体系自主作战系统设计

针对无人集群自主作战体系设计中的关键问题,提出基于Multi-Agent的无人集群自主作战系统设计方法。建立无人集群各节点的Agent模型及其推演规则;对于仿真系统模块化和通用化的需求,设计系统互操作式接口和无人集群自主作战的交互关系;开展无人集群系统仿真推演验证。仿真结果表明,所提设计方案不仅能够有效开展并完成自主作战网络生成-集群演化-效能评估的全过程动态演示验证,而且能够通过重复随机试验进一步评估无人集群的协同作战效能,最后总结了集群协同作战的策略和经验。

Construction of Electrocatalytic and Heat-Resistant Self-Supporting Electrodes for High-Performance Lithium–Sulfur Batteries

Boosting the utilization efficiency of sulfur electrodes and suppressing the“shuttle effect”of intermediate polysulfides remain the critical challenge for high-performance lithium-sulfur batteries(LSBs).However,most of reported sulfur electrodes are not competent to realize the fast conversion of polysulfides into insoluble lithium sulfides when applied with high sulfur loading,as well as to mitigate the more serious shuttle effect of polysulfides,especially when worked at an elevated temperature.Herein,we reported a unique structural engineering strategy of crafting a unique hierarchical multifunctional electrode architecture constructed by rooting MOF-derived CoS2/carbon nanoleaf arrays(CoS2-CNA)into a nitrogen-rich 3D conductive scaffold(CTNF@CoS2-CNA)for LSBs.An accelerated electrocatalytic effect and improved polysulfide redox kinetics arising from CoS2-CNA were investigated.Besides,the strong capillarity effect and chemisorption of CTNF@CoS2-CNA to polysulfides enable high loading and efficient utilization of sulfur,thus leading to high-performance LIBs performed not only at room temperature but also up to an elevated temperature(55°C).Even with the ultrahigh sulfur loading of 7.19 mg cm?2,the CTNF@CoS2-CNA/S cathode still exhibits high rate capacity at 55°C.

Effect of RE addition on solidification process and high-temperature strength of Al-12%Si-4%Cu-1.6%Mn heat-resistant alloy

The effect of RE addition on solidification process and high-temperature strength of Al-12%Si-4%Cu-1.6%Mn(in wt.%)heat-resistant alloy was investigated by microstructure observation and tensile test.A great number of fine needle-like RE-rich phases are observed in the alloys with RE addition. Solutionizing treatment does not change their morphologies and sizes, indicating that they have good thermal stability. The addition of RE totally alters the solidification process of eutectic CruAl2 phase, from network-like phase in the form of segregation at the final eutectic grain boundaries to discretely blocky phase growing on the hair-filamentous RE-rich needles. In the alloys with Ce addition, blocky CuAl2, particulate Al15Mn3Si2 and needle-like RE-rich needle phases grow together, but they did not occur in the alloy with only La addition. The addition of RE does not considerably improve the strength of the alloy at high temperatures. The formation of RE-rich phases also does not significantly alter the originating and propagating of micro-cracks in the alloy during tensile test.

Achieving a high-strength dissimilar joint of T91 heat-resistant steel to 316L stainless steel via friction stir welding

The reliable welding of T91 heat-resistant steel to 316L stainless steel is a considerable issue for ensuring the safety in service of ultrasupercritical power generation unit and nuclear fusion reactor,but the high-quality dissimilar joint of these two steels was difficult to be obtained by traditional fusion welding methods.Here we improved the structure-property synergy in a dissimilar joint of T91 steel to 316L steel via friction stir welding.A defect-free joint with a large bonding interface was produced using a small-sized tool under a relatively high welding speed.The bonding interface was involved in a mixing zone with both mechanical mixing and metallurgical bonding.No obvious material softening was detected in the joint except a negligible hardness decline of only HV~10 in the heat-affected zone of the T91 steel side due to the formation of ferrite phase.The welded joint exhibited an excellent ultimate tensile strength as high as that of the 316L parent metal and a greatly enhanced yield strength on account of the dependable bonding and material renovation in the weld zone.This work recommends a promising technique for producing high-strength weldments of dissimilar nuclear steels.

Influence of Creep Strength of Weld on Interfacial Creep Damage of Dissimilar Welded Joint between Martensitic and Bainitic Heat-Resistant Steel

The mechanical properties, creep rupture strength, creep damage and failure characteristics of dissimilar metal welded joint （DMWJ） between martensitic （SA213T91） and bainitic heat-resistant steel （12Cr2MoWVTiB（G102）） have been investigated by means of pulsed argon arc welding, high temperature accelerated simulation, mechanical and creep rupture test, and scanning electronic microscope （SEM）. The results show that there is a marked drop of mechanical properties of undermatching joint, and low ductility cracking along weld/G102 interface is induced due to creep damage. Creep rupture strength of overmatching joint is the least. The mechanical properties of medium matching joint are superior to those of overmatching and undermatching joint, and creep damage and failure tendency along the interface of weld/G102 are lower than those of overmatching and undermatching joint after accelerated simulation for 500 h, 1 000 h, 1 500 h, and the creep rupture strength of medium matching joint is the same as that of undermatching joint. Therefore, it is reasonable that the medium matching material is used for dissimilar welded joint between martensitic and bainitic steel.

Dissolution Behavior of Delta Ferrites in Martensitic Heat-resistant Steel for Ultra Supercritical Units Blades

The dissolution behavior of delta ferrites in martensitic heat-resistant steel was studied.And the reason why the dissolution rate of delta ferrites decreased with dissolution time was discussed.The experimental results show that the chemical compositions of delta ferrites negligibly change with dissolution time.The decrease of dissolution rate of delta ferrites with dissolution time should be attributed to the change of shape and distribution of delta ferrites.The shape of delta ferrites tends to transfer from polygon to sphere with dissolution time,causing the decrease of specific surface area of delta ferrites.The distribution position of delta ferrites tends to transfer from boundaries of austenite grains to interior of austenite grains with dissolution time,decreasing the diffusion coefficient of alloy atoms.Both them decrease the dissolution rate of delta ferrites.

High-temperature oxidation behavior of 9Cr‒5Si‒3Al ferritic heat-resistant steel

To improve the oxidation properties of ferritic heat-resistant steels,an Al-bearing 9Cr‒5Si‒3Al ferritic heat-resistant steel was designed.We then conducted cyclic oxidation tests to investigate the high-temperature oxidation behavior of 9Cr‒5Si and 9Cr‒5Si‒3Al ferritic heat-resistant steels at 900 and 1000℃.The characteristics of the oxide layer were analyzed by X-ray diffraction,scanning electron microscopy,and energy dispersive spectroscopy.The results show that the oxidation kinetics curves of the two tested steels follow the parabolic law,with the parabolic rate constant kp of 9Cr‒5Si‒3Al steel being much lower than that of 9Cr‒5Si steel at both 900 and 1000℃.The oxide film on the surface of the 9Cr‒5Si alloy exhibits Cr2MnO4 and Cr2O3 phases in the outer layer after oxidation at 900 and 1000℃.However,at oxidation temperatures of 900 and 1000℃,the oxide film of the 9Cr‒5Si‒3Al alloy consists only of Al2O3 and its oxide layer is thinner than that of the 9Cr‒5Si alloy.These results indicate that the addition of Al to the 9Cr‒5Si steel can improve its high-temperature oxidation resistance,which can be attributed to the formation of a continuous and compact Al2O3 film on the surface of the steel.

Microstructure and mechanical properties of a cast heat-resistant rare-earth magnesium alloy

Microstructure,mechanical properties and phase transformation of a heat-resistant rare-earth(RE)Mg-16.1Gd-3.5Nd-0.38Zn-0.26Zr-0.15Y(wt.%)alloy were investigated.The as-cast alloy is composed of equiaxedα-Mg matrix,net-shaped Mg5RE and Zr-rich phases.According to aging hardening curves and tensile properties variation,the optimized condition of solution treatment at 520℃for 8 h and subsequent aging at 204℃for 12 h was selected.The continuous secondary Mg5RE phase predominantly formed at grain boundaries during solidification transforms to residual discontinuousβ-Mg5RE phase and fine cuboid REH2particles after heat treatment.The annealed alloy exhibits good comprehensive tensile property at 350℃,with ultimate tensile strength of 153 MPa and elongation to fracture of 6.9%.Segregation of RE elements and eventually RE-rich precipitation at grain boundaries are responsible for the high strength at elevated temperature.