Synthesis and microwave absorption performance of heat-treated RF/SiO_(2)aerogels

The well-designed composite with satisfactory electromagnetic microwave absorption at high temperatures remains a serious challenge.Herein,we fabricated a resorcinol-formaldehyde/silica dioxide composite aerogel(RF/SiO_(2))with a three-dimensional network structure using sol-gel,atmospheric pressure drying technique as well as heat-treated processes to achieve enhanced microwave absorption capabilities in the low frequency range.The pristine RF/SiO_(2)aerogel presented a typical micropores structure with a surface area,porous volume,and density of 146.82 m^(2)/g,62.40%,and 0.28 cm^(3)/g,respectively.Remarkably,the RF/SiO_(2)aerogel showed an effective absorption bandwidth of 3.56 GHz and a minimum reflection loss value of-46.10 d B at 2.25 mm after being heat-treated at 1500°C,while the maximum effective absorption bandwidth was 3.60 GHz at 2.30 mm.The intricate three-dimensional networks possessed remarkable impedance matching,multiple attenuation mechanisms,interfacial polarization,and dielectric loss,which were attributed to the exceptional ability to absorb electromagnetic microwaves.It offered a fresh approach to creating adaptable and effective microwave absorption materials in military defense.

Heat-treated wood and its development in Europe

Efficient use of timber is a vital concern problem, especially in these regions where the forestry coverage ratio is decreasing. Studies on physical modification of wood have been taken more attention due to the increasing attentions on environmental protection. Thermal modification is emphasized and developed quickly in developing countries, especially in European countries. A large number of researches have been conducted and some industrial production plants have been built. This paper reviewed the history of heat treatment, exemplifies the industrial developments in several European countries, summarized the basic principle of heat treatment and describes the environmental characteristics. The properties of heat-treated wood and its usage are also summed up.

Effect of Ca addition on the microstructure and mechanical properties of heat-treated Mg-6.0Zn-1.2Y-0.7Zr alloy

In this study,the effects of Ca addition on the microstructure,thermal properties,and mechanical properties of a Mg-6.0Zn-1.2Y-0.7Zr(ZWK611)alloy at room temperature and 150℃ were investigated.With an increase in the Ca content,the ignition resistance of the ZWK611 alloy improved and the grains became finer.The as-cast ZWK611 alloy consisted mainly of the dendriticα-Mg matrix and I-phase(Mg_(3)Zn_(6)Y)at the grain boundaries.On the other hand,theτ-(Ca_(2)Mg_(6)Zn_(3))and I-phases were formed in the Ca-added ZWK611 alloy.The fraction of theτ-phase increased with an increase in the Ca content.After the solid-solution treatment,these phases remained partially at the grain boundaries of the Ca-added ZWK611 alloys and an additional W-phase(Mg_(3)Zn_(3)Y)was observed.The phases remaining at the grain boundaries restricted the grain growth through the grain boundary pinning effect.The aging treatment resulted in the formation of MgZn'precipitates in theα-Mg matrix of the alloys.These precipitates were more uniformly distributed in the Ca-added alloys than in the alloys without Ca.Thus,the heat treatment-induced precipitation improved the tensile and creep properties of the T6-treated alloys.The T6-treated ZWK611+0.7Ca alloy exhibited the best mechanical properties at room temperature and 150℃ among all the tested alloys.

Microstructure and cutting performance of Ti(C, N)-based cermets heat-treated in nitrogen

Ti（C, N）-based cermets were treated using hot isostatic pressing （HIP） at 1423 K in nitrogen. The microstructures compared with the as-sintered cermets were investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray analysis, and electron microprobe analysis. It was found that high nitrogen activity in the surface zone resulted in the formation of gradient structure. Approximately 20-1am-deep, nitrogen-rich and titanium-rich hard surface zone was introduced by the heat treatment. The nitrogen activity was the driving force that caused the transportation of the atoms through the binder, titanium towards the surface, and tungsten and molybdenum inwards. In the surface zone, the particle size became fine, the inner rim disappeared, and the volume fraction of the outer rim and the binder phase considerably reduced. Small grains of TiN, WC, Mo2C, and nitrogen-rich carbonitlide phases formed in the surface zone during the heat treatment, improving the tlibological property of the heat-treated cermet.

Carbon sequestration in a bamboo plantation:a case study in a Mediterranean area

In the Mediterranean region,despite bamboo being an alien species that can seriously alter plant and ani-mal biocoenosis,the area occupied by bamboo plantations continues to increase,especially for the purpose to seques-ter carbon(C).However,the C dynamics in the soil-plant system when bamboo is grown outside its native area are poorly understood.Here we investigated the C mitigation potential of the fast-growing Moso bamboo(Phyllostachys edulis)introduced in Italy for climate-change mitigation.We analyzed aboveground(AGB)and belowground(as root/shoot ratio)biomass,litter and soil organic C(SOC)at O-15-and 15-30-cm depths in a 4-year-old bamboo plantation in comparison with the former annual cropland on which the bamboo was established.To have an idea of the maximum C stored at an ecosystem level,a natural forest adjacent the two sites was also considered.In the plantation,C accumulation as AGB was stimulated,with 14.8±3.1 Mg C ha^(-1) stored in 3 years;because thinning was done to remove culms from the first year,the mean sequestration rate was 4.9 Mg C ha^(-1) a^(-1).The sequestration rates were high but comparable to other fast-growing tree species in Italy(e.g.,Pinus nigra).SOC was significantly higher in the bamboo plantation than in the cropland only at the 0-15 cm depth,but SOC stock did not differ.Possibly 4 years were not enough time for a clear increase in SOC,or the high nutrient uptake by bamboos might have depleted the soil nutrients,thus inhibiting the soil organic matter formation by bacteria.In comparison,the natural forest had significantly higher C levels in all the pools.For C dynamics at an ecosystem level,the bamboo plantation on the former annual cropland led to substantial C removal from the atmosphere(about 12 Mg C ha^(-1) a^(-1)).However,despite the promising C sequestration rates by bamboo,its introduction should be carefully considered due to potential ecological problems caused by this species in overexploited environments such as the Mediterranean area.

Study on Weathering Behavior of Jack Pine Heat-Treated under Different Conditions

It is of considerable importance to investigate the influence of weathering on the degradation processes of heat-treated wood. Kiln-dried （untreated）jack pine （Pinus banksiana） and jack pine heat-treated at three different temperatures （190 ℃, 200 ℃, and 210 ℃） were exposed to artificial weathering for different periods in order to understand the degradation processes due to weathering. Before and after exposure, their color and wettability by water were determined. Structural changes and chemical modifications at exposed surfaces were also investigated using SEM （scanning electron spectroscopy）, FTIR （Fourier transforms infrared spectroscopy）, and XPS （X-ray photoelectron spectroscopy）. The results revealed that the photo-degradation of lignin and the presence of extractives play important roles in color change and wetting behavior of heat-treated wood surfaces during weathering. The structural changes also influence the wettability. The effects of weathering for woods heat-treated under different conditions were similar, but different from those for untreated wood.

Lactobacillus from fermented bamboo shoots prevents inflammation in DSS-induced colitis mice via modulating gut microbiome and serum metabolites

Fermented bamboo shoots(FBS)is a region-specific food widely consumed in Southwestern China,with Lactobacillus as the predominant fermenting bacteria.However,the probiotic potential of Lactobacillus derived from FBS reminds largely unexplored,especially for diseases with a low prevalence in areas consuming FBS,namely,inflammatory bowel disease.In this study,Lactiplantibacillus pentosus YQ001 and Lentilactobacillus senioris YQ005 were screening by in vitro probiotic tests to further investigate the probioticlike bioactivity in dextran sulfate sodium(DSS)-induced ulcerative colitis(UC)mouse.They exhibited more positive probiotic effects than Lactobacillus rhamnosus GG in preventing intestinal inflammatory response.The results revealed that both strains improved the abundance of deficient intestinal microbiota in UC mice,including Muribaculaceae and Akkermansia.In the serum metabolome,they modulated the DSS-disturbed levels of metabolites,with significant increment of cinnamic acid.Meanwhile,they reduced the expression levels of interleukin-1β(IL-1β),interleukin-6(IL-6)inflammatory factors and increased zonula occludens-1(ZO-1),Occludin,and cathelicidin-related antimicrobial peptide(CRAMP)in the colon.Consequently,these results demonstrated that Lactobacillus spp.isolates derived from FBS showed promising probiotic activity based on the gut microbiome homeostasis modulation,anti-inflammation and intestinal barrier protection in UC mice.

Theoretical Analysis on Deflection and Bearing Capacity of Prestressed Bamboo-Steel Composite Beams

A theoretical analysis of upward deflection and midspan deflection of prestressed bamboo-steel composite beams is presented in this study.The deflection analysis considers the influences of interface slippage and shear deformation.Furthermore,the calculation model for flexural capacity is proposed considering the two stages of loading.The theoretical results are verified with 8 specimens considering different prestressed load levels,load schemes,and prestress schemes.The results indicate that the proposed theoretical analysis provides a feasible prediction of the deflection and bearing capacity of bamboo-steel composite beams.For deflection analysis,the method considering the slippage and shear deformation provides better accuracy.The theoretical method for bearing capacity matches well with the test results,and the relative errors in the serviceability limit state and ultimate limit state are 4.95%and 5.85%,respectively,which meet the accuracy requirements of the engineered application.

A Review of Basic Mechanical Properties of Bamboo Scrimber Based on Small-Scale Specimens

This review summarizes the existing knowledge about the mechanical properties of bamboo scrimber(BS)in literature.According to literature reviews,the strength of BS under different load modes is affected by a series of factors,such as the type of original bamboo,growth position,resin content,treatment method and density.Therefore,different production processes can be adopted according to different requirements,and bamboo scrimbers can also be classified accordingly.In addition,this review summarizes the changes in different factors considered by scholars in the research on the mechanical properties of BS,so that readers can have an overall understanding of the existing research and make more innovative and valuable research on this basis.This review provides and discusses the conclusive observations,the current research gaps and future research directions on the mechanical properties of BS.

Harnessing the Market Potential of the Bamboo Industry in Central Luzon, Philippines: An Analysis of the Internal and External Environment

The bamboo industry in Central Luzon holds significant promise for economic development and environmental sustainability. This study aims to analyze the internal and external factors influencing the bamboo industry in the region through SWOT and PESTLE analyses. Based on a focus group discussion involving key industry players, the study explores the industry’s strengths, weaknesses, opportunities, and threats, as well as political, economic, social, technological, legal, and environmental factors. Findings reveal the importance of comprehensive strategies that address political stability, economic growth, consumer awareness, technological advancement, legal compliance, and environmental sustainability. Recommendations include capacity-building for production and marketing, the establishment of bamboo treatment facilities, and advocacy for supportive policies. By addressing these factors, the bamboo industry in Central Luzon can realize its potential for socio-economic development and environmental stewardship.

Effectiveness of Bark Extracts and CeO2 Nano Particles as Coating Additives for the Protection of Heat-Treated Jack Pine

High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistance compared to kiln dried wood. It also has dark brown color which is very important for decorative purposes. Unfortunately, this color changes during weathering. Developing a transparent and non-toxic coating for the protection of heat-treated wood against discoloration without changing its natural appearance is the main objective of this study. For this purpose, waterborne acrylic polyurethane base was chosen because of its durability against weathering and non-toxic nature. Natural antioxidants which are extracted from barks and CeO2 nano particles （alone or together with lignin stabilizer） were used as additives to develop different coatings. The protective characteristics of these coatings were compared with highly pigmented and toxic industrial coating under accelerated weathering conditions. The results showed that acrylic polyurethane coatings protected wood better compared to commercially available coating tested in this study. The chemical modifications during accelerated weathering of coated and heat-treated wood surfaces were monitored by X-ray photoelectron spectroscopy analysis. The morphological changes took place during weathering were studied by fluorescence microscope analysis.

Alkali and Plasma-Treated Guadua angustifolia Bamboo Fibers:A Study on Reinforcement Potential for Polymeric Matrices

This study focuses on treating Guadua angustifolia bamboo fibers to enhance their properties for reinforcement applications in composite materials.Chemical(alkali)and physical(dry etching plasma)treatments were used separately to augment compatibility of Guadua angustifolia fibers with various composite matrices.The influence of these treatments on the fibers’performance,chemical composition,and surface morphology were analyzed.Statistical analysis indicated that alkali treatments reduced the tensile modulus of elasticity and strength of fibers by up to 40%and 20%,respectively,whereas plasma treatments maintain the fibers’mechanical performance.FTIR spectroscopy revealed significant alterations in chemical composition due to alkali treatments,while plasma-treated fibers showed minimal changes.Surface examination through Scanning Electron Microscopy(SEM)revealed post-treatment modifications in both cases;alkali treatments served as a cleanser,eliminating lignin and hemicellulose from the fiber surface,whereas plasma treatments also produce rough surfaces.These results validate the impact of the treatments on the fiber mechanical performance,which opens up possibilities for using Guadua angustifolia fibers as an alternative reinforcement in composite manufacturing.

Experimental Study on the Axial Compression Performance of Bamboo Scrimber Columns Embedded with Steel Reinforcing Bars

In this paper,a new type of bamboo scrimber column embedded with steel bars(rebars)was proposed,and the compression performance was improved by pre-embedding rebars during the preparation of the columns.The effects of the slenderness ratio and the reinforcement ratio on the axial compression performance of reinforced bamboo scrimber columns were studied by axial compression tests on 28 specimens.The results showed that the increase in the slenderness ratio had a significant negative effect on the axial compression performance of the columns.When the slenderness ratio increased from 19.63 to 51.96,the failure mode changed from strength failure to buckling failure,and the maximum bearing capacity decreased by 43.03%.The axial compression performance of the reinforced bamboo scrimber columns did not significantly improve at a slenderness ratio of 19.63,but the opposite was true at slenderness ratios of 36.95 and 51.96.When the reinforcement ratio increased from 0%to 4.52%,the bearing capacity of those with a slenderness ratio of 51.96 increased by up to 16.99%,and the stiffness and ductility were also improved.Finally,based on existing specifications,two modification parameters,the overall elastic modulus Ec and the combined strength fcc,were introduced to establish a calculation method for the bearing capacity of the reinforced bamboo scrimber columns.The calculation results were compared with the test results,and the results showed that the proposed calculation models can more accurately predict the bearing capacity.

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent years.Bamboo fibers are renowned for their good mechanical properties,abundance,and short cycle growth.As beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic foundation.Three different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the thickness.The elastic properties of the composite are determined with the law of mixture.Employing Hamilton’s principle,the governing equations of motion are obtained.The generalized differential quadrature method(GDQM)is then applied to the equations to obtain the results.The achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam change.Furthermore,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber distribution.Eventually,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

Inhibition of Propionibacterium acnes by refined bamboo vinegar and preparation of the slow-release system with bamboo charcoal as the carrier

Background:Acne vulgaris is one of the most common skin diseases that can significantly impact a considerable proportion of individuals over their lifetime.Objective:This study focuses on the exploration of the application potential of bamboo vinegar in cosmetics.Materials and Methods:The stock solution of bamboo vinegar is subjected to reduced-pressure distillation at different temperatures to obtain refined bamboo vinegar.Then,inhibition of Propionibacterium acnes(P.acnes)by refined bamboo vinegar is observed.Moreover,the refined bamboo vinegar is adsorbed and released with activated bamboo charcoal as the carrier.In all,this study aims to probe into the mechanism of the controlledrelease system of bamboo vinegar.Results:The results shows that the harmful substances(tar)in bamboo vinegar distilled at 70℃decreased by 94.44%,which is a more notable decrease compared with that in the stock solution.The total organic acid content in bamboo vinegar after reduced-pressure distillation is 11.840%,reaching the national standard for refined bamboo vinegar(GB/T 31734–2015).Additionally,the minimum inhibitory concentration of refined bamboo vinegar against P.acnes using the punch method is 7.90 mg/mL.This indicates that refined bamboo vinegar has the potential as a prospective raw material for formulations in anti-acne cosmetic products.Furthermore,the release rate of bamboo charcoal/bamboo vinegar in water for 15 min reaches 70.57%,which then slows down to a plateau.The slow-release behavior is agreed with the Ritger-Peppas model and is beneficial to relieve the irritation of bamboo vinegar to the skin and lengthen its bacteriostatic duration.Conclusion:The foregoing conclusions can serve as the theoretical foundation for the application of bamboo vinegar in anti-acne cosmetics.

Fabrication and Characterization of Bamboo—Epoxy Reinforced Composite for Thermal Insulation

As global warming intensifies, researchers worldwide strive to develop effective ways to reduce heat transfer. Among the natural fiber composites studied extensively in recent decades, bamboo has emerged as a prime candidate for reinforcement. This woody plant offers inherent strengths, biodegradability, and abundant availability. Due to its high cellulose content, its low thermal conductivity establishes bamboo as a thermally resistant material. Its low thermal conductivity, enhanced by a NaOH solution treatment, makes it an excellent thermally resistant material. Researchers incorporated Hollow Glass Microspheres (HGM) and Kaolin fillers into the epoxy matrix to improve the insulating properties of bamboo composites. These fillers substantially enhance thermal resistance, limiting heat transfer. Various compositions, like (30% HGM + 25% Bamboo + 65% Epoxy) and (30% Kaolin + 25% Bamboo + 45% Epoxy), were compared to identify the most efficient thermal insulator. Using Vacuum Assisted Resin Transfer Molding (VARTM) ensures uniform distribution of fillers and resin, creating a structurally sound thermal barrier. These reinforced composites, evaluated using the TOPSIS method, demonstrated their potential as high-performance materials combating heat transfer, offering a promising solution in the battle against climate change.

The Tallest Grass-Bamboo

Although bamboo is really a kind of grass,it looks more like tree-a beautiful tree.Chinese poets write poems and songs about bamboo,the artists paint it in pictures.

Influence of heat-treatment on oxidation-resistance of phosphate-coating for C/C composite

Phosphate-coating was prepared for C/C composite using liquid-impregnation and different heat-treatment. The results show that the mass-loss rate of sample A with 1-2 ℃/min slow-cooling rate technology is 47%after oxidation at 700 ℃ for 20 h, while that of sample B with air-fast-cooling one is only 0.98%. SEM images reveal that the coating of sample A is full of micro-holes, micro-cracks and many piece-like crystal particles, while that of sample B is integrated and compacted in glassy state with a few of micro-cracks. The coating of sample A is almost exhausted only in 8 h oxidized-test at 700 ℃, while that of sample B remains integrated after 8 h test at 700 ℃ and becomes loose due to much small pores generated after 20 h test at 700 ℃.

Carbonization mechanism of bamboo (phyllostachys) by means of Fourier Transform Infrared and elemental analysis

通过测定在200-600℃炭化竹材得到的固体产物的碳、氢、氧元素的含量及它们的红外光谱,研究了在炭化过程中竹材中半纤维素、纤维素及木素的变化规律。结果表明,结合元素分析,红外光谱分析方法是研究竹材炭化机理的有效手段。在200℃以前,竹材中的半纤维素和纤维素的大量羟基断裂,并结合成水而失去。在200-250℃之间,竹材中的纤维素被降解,其中的吡喃型环也遭到破坏。并且木素中的甲氧基也被脱去。竹材中的木素网状结构在250-400℃之间遭到完全的破坏。竹炭中的碳原子在600℃已基本上完成了芳环化。图3表2参15。

Acetylation of Chinese bamboo flour and thermoplasticity

Chinese bamboo flour was chemically modified by acetylation with acetic anhydride by using trichloroacetic acid as an activation agent and the optimized condition for acetylation of bamboo flour was determined as the trichloroacetic acid amount 6.0 g per 1.5-g bamboo flour, ultrasosonication duration 40 min and the reaction time 1 h at 65℃. The composition, microstructure and thermal behavior of acetylated bamboo flour were preliminarily characterized by FT-IR, DSC and SEM etc. The acetylated bamboo flour can be molded into sheets at 130℃ and 10 MPa, indicating the modified bamboo flour possesses thermalplastic performance.