Algorithm of heating temperature for Chongqing's winter greenhouses

Internal temperature is crucial to plant growth in the greenhouse. We investigated the patterns of constructing and managing greenhouses in Chongqing, and developed an algorithm of heating temperature for closed winter plastic greenhouses under the conditions of no man-made illumination, no ventilation and hot wind machine as the heating equipment, which are the most adopted pattern of greenhouses in Chongqing area. The algorithm includes two functions of temperature outside the greenhouse, which calculate the values of the warming estimation coefficient (WEC) and the gap between temperatures inside and outside the greenhouse with the measured data of outside temperature, and then give the value of internal temperature; the heat rating of heating facilities required by a greenhouse can be determined by this algorithm with given values of floor area and internal temperature, measured outside temperature and calculated WEC. Verification of the algorithm demonstrates a desirable accuracy of estimation. Algorithms of computing heating temperature for greenhouses of different constructing and managing patterns and in different geographic conditions can also be derived in a similar way. This research presents a paradigm for developing a feasible method to fit out greenhouses with appropriate heating facilities, aiming at energy efficient and cost efficient production.

Heat flow balance and control strategies for a large GSHP

The possibility of underground imbalance between heat emission and absorption has a negative impact on the performance of ground-source heat pump systems （GSHPs）. Numerical and experimental researches were made in a residential building, which is supplied with a GSHP system and a ceiling radiation system combined with a replacement fresh air system. EnergyPlus simulations were used to estimate heating and cooling loads, and to assess the heat generated from the water pump, the fan and the heat pump unit. Then, Fluent simulations were used to compare three different control strategies of handling the underground heat exchange. These simulations were strongly based on an experimentally verified model. It is obtained that a ratio between cooling and heating loads is 5.08 ： 1 in a case study in Nanjing. Moreover, the control strategy based on the starting time is more efficient and reliable than the temperature and temperature difference strategies to control the underground heat exchange.

FREEZE PROFILE AND HEAT BALANCE CALCULATION OF THE 160kA DRAINED CELL

A 2D full cell thermo-electric model of 160kA drained cell was set up using finiteelement code to calculate its freeze profile, then the drained cell model was modifiedaccording to the freeze profile computed and its heat balance was calculated. Comparedwith that of a 160kA conventional Hall-Heroult cell (H-H cell), though the melts vol-ume of the drained cell reduced greatly, the whole heat loss from it didn't drop downapparently, and an analysis was presented in the paper. On the other hand, the anode-cathode distance (ACD) of a drained cell was much less than that of a H-H cell, sothe voltage drop on it and heat produced decreased too, steps should be taken to keepa workable heat balance on a drained cell.

Role of heat balance on the microstructure evolution of cold spray coated AZ31B with AA7075

A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on microstructure,experiments were designed to successfully coat AA7075 on AZ31B with two different heat balance conditions to yield a coated sample with tensile residual stress and a sample with compressive residual stress in both coating and substrate.The effects of coating temperature on the microstructure of magnesium alloy and the interfaces of coated samples were then analyzed by SEM,EBSD,TEM in high-and low-heat input coating conditions.The interface of the AA7075 coating and magnesium alloy substrate under both conditions consists of a narrow-band layer with very fine grains,followed by columnar grains of magnesium that have grown perpendicular to the interface.At higher temperatures,this layer became wider.No intermetallic phase was detected at the interface under either condition.It is shown that the microstructure of the substrate was affected by coating temperature,leading to stress relief,dynamic recrystallization and even dynamic grain growth of magnesium under high temperature.Reducing the heat input and increasing the heat transfer decreased microstructural changes in the substrate.

Heat balance of solar-soil source heat pump compound system

Based on the state-of-the-art studies of solar-soil source heat pump compound system, operation patterns of solar-soil compound system were analyzed, particularly the advantages of parallel operation pattern. It is found that parallel operation pattern is better for solar-soil compound system. Furthermore, the heat balance issue of solar-soil compound system was emphatically analyzed from four aspects, which were annual analysis of heating and cooling load, the heat exchange of ground heat exchanger, capacity determination of solar-assisted heat sottrce and heat balance calculation of solar-soil compound system. Moreover, annual rate of heat balance in a solar-soil source heat pump compound system was calculated with a case study. It is shown that the annual heat unbalance ratio is 19%, which is less than 20%. As a result, the practical solar-soil compound system can basically maintain the heat balance of soil.

Study on the Influence of Piloti on Mean Radiant Temperature in Residential Blocks by 3-D Unsteady State Heat Balance Radiation Calculation

Piloti is commonly used in tropical and subtropical climate zones to get high wind velocity and create shadowed areas in order to optimize the living environment of residential blocks,but there are few studies to reveal the influence of piloti on the radiant environment of residential blocks systematically. Taking the city of Guangzhou as an example,using 3-D Unsteady State Heat Balance Radiation Calculation Method,this paper shows that the mean radiant temperature( MRT) under piloti area increases with the increase of piloti ratio,and especially when piloti ratio is equal to 100%,the MRT increase trend becomes sharp. The MRT of exposed area decreases with the increase of piloti ratio,especially when piloti ratio reaches 100%,the decrease trend of MRT becomes sharp,which offers the reference for the study on piloti design in subtropical climate zones and further research on living environment by CFD simulation in residential blocks.

Mining a coal seam below a heating goaf with a force auxiliary ventilation system at Longhua underground coal mine, China

Extraction of a coal seam which lies not far below a heating goafcan be a major safety challenge. A force auxiliary ventilation system was adopted as a control method in successful extraction and recovery of the panel 30110 of the #3-1 coal seam, which is about 30-40 rn below the heating goaf of the #2-2 seam at Longhua underground coal mine, Shanxi Province, China. Booster fans and ventilation control devices such as doors and regulators were used in the system. The results show that, provided that a force auxiliary ventilation system is properly designed to achieve a pressure balance between a panel and its overlying goat＇, the system can be used to extract a coal seam overlain by a heating goal. This paper describes the design, installation and performance of the ventilation system during the extraction and recovery phases of the oanel 30110.

The heat balance on the sea surface in the mature phase of 1982/83 El Nino event

Using the air-sea data set of January, 1983 (the mature phase of the 1982/83 El Nino event), the net radiation on the sea surface, the fluxes of the latent and the sensible heat from ocean to the atmosphere and the net heat gain of the sea surface are calculated over the Indian and the Pacific Oceans for the domain of 35°N-35°S and 45°E-75°W. The results indicate that the upward transfer of the latent and the sensible heat fluxes over the winter hemisphere is larger than that over the summer hemisphere. The sensible heat over the tropical mid Pacific in the Southern Hemisphere is transported from the atmosphere to the ocean, though its magnitude is rather small. The latent heat flux gained by the air over the eastern Pacific is less than the mean value of the normal year. The net radiation, on which the cloud amount has considerable impact, is essentially zonally distributed. Moreover, the sea surface temperature (SST) has a very good correlation with the net radiation, the region of warm SST coinciding with that of the low net radiation. The net radiation obtained by the mid Pacific Ocean is reduced by the SST anomaly during the El Nino event, whereas the atmosphere over there get more latent heat flux, and this results in the diminution of the net heat gain of the ocean. The overview of the heat budget is that the ocean over the winter hemisphere is the energy source of the atmosphere, and that over the summer hemisphere its energy sink.

The Heat Balance in the Western Equatorial Pacific Warm Pool during the Westerly Wind Bursts: A Case Study

The responses of sea surface temperature (SST) in the western equatorial Pacific warm pool to the westerly wind bursts (WWBs) play an important role in the relationship between WWB and ENSO. By using data collected from eight buoys of TOGA (Tropical Ocean-Global Atmosphere)- COARE (Coupled Ocean-Atmosphere Response Experiment), the heat balances of the upper ocean in the western equatorial Pacific around 0 degrees, 156 degreesE during two WWB events were calculated according to Stevenson and Niiler's (1983) method. In both events, SST increased before and after the WWBs, while decreased within the WWBs. The SST amplitudes approximated to 1 degreesC. Although sometimes the horizontal heat advections may become the biggest term in the heat balance, the variation of SST was dominated by the surface heat flux. On the other aspect, some different features of the two events are also revealed. The two cases have different variation of mixed layer depth. The depth of mixed layer is almost double in the first case (35 in to 70 m), which is caused by Ekman convergence, while only 10m increments due to entrainment in the second one, There are also differences in the currents structure. The different variations of thermal and currents structure in the mixing layers accounted for the different variation of the heat balance during the two events, especially the advection and residue terms. The seasonal variation of SST in this area is also investigated simply. The first WWB event happened just during the seasonal transition. So we considered that it is a normal season transition rather than a so-called anomaly. That also suggested that the seasonal distinction of the WWB is worthy of more attention in the researches of its relationship to ENSO.

Effect of the Lower Boundary Position of the Fourier Equation on the Soil Energy Balance

In this study, the e?ect of the lower boundary position selection for the Fourier equation on heat transfer and energy balance in soil is evaluated. A detailed numerical study shows that the proper position of the lower boundary is critical when solving the Fourier equation by using zero heat ?ux as the lower boundary condition. Since the position de?nes the capacity of soil as a heat sink or source, which absorbs and stores radiation energy from the sky in summer and then releases the energy to the atmosphere in winter, and regulates the deep soil temperature distribution, the depth of the position greatly in?uences the heat balance within the soil as well as the interaction between the soil and the atmosphere. Based on physical reasoning and the results of numerical simulation, the proper depth of the position should be equal to approximately 3 times of the annual heat wave damping depth. For most soils, the proper lower boundary depth for the Fourier equation should be around 8 m to 15 m, depending on soil texture.

Parallel Correlative Study of the Heat Balance Test Process for Testing the Efficiency of Turbo-Generators

In order to prolong the life span of a turbo-generator plant and sustain its performance at high efficiency, it is subjected periodically to regular test to monitor the operational profile and efficiency of power conversion from mechanical energy to electrical energy. Analysis of these test data serves as a measure to indicate deviation from normal operation profile and deterioration of plant performance. This present work implemented the heat balance tests process to three turb- generator units in order to assess the harmony, consistency, and accuracy of results to establish parallel correlation for the test process. The test process involves carrying out a heat balance for the turbo-generators at 50%, 75% and 100% load respectively through the determination of the heat losses through the hydrogen coolers, bearing oil, seal oil and radiation and convention to the atmosphere. Some important results were presented in the paper.

Heat Transfer Analysis on Wire Icing and the Current Preventing from Icing

This study concerns the heat transfer processes during ice accretion on wires. The steady state heat balance equation assumed to describe the thermodynamics at the surface of a current heated wire subjected to icing is obtained by analyzing and computing each terms of heat flux. The surface temperature of wire is derived from the heat balance equation, which gives out a proposed estimation of the current intensity to prevent the wire icing

Isothermal extrusion speed curve design for porthole die of hollow aluminium profile based on PID algorithm and finite element simulations

The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was determined by considering the maximum extrusion load and production efficiency.By taking the optimal solution temperature of the secondary phase as the target temperature,the extrusion speed–stroke curve for realizing the isothermal extrusion of the aluminium profile was obtained.Results show that in the traditional constant extrusion speed process,the average temperature of the cross-section of the aluminium profile at the die exit rapidly increases and then slowly rises with the increase in ram displacement.As the extrusion speed increases,the temperature difference at the die exit of the profile along the extrusion direction increases.The exit temperature difference between the front and back ends of the extrudate along the extrusion direction obtained by adopting isothermal extrusion is about 6.9℃.Furthermore,the heat generated by plastic deformation and friction during extrusion is balanced with the heat transfer from the workpiece to the container,porthole die and external environment.

Numerical Experiments for the influence of the Transition Zone Migration on Summer Climate in North China

As the position of the transition zone changes obviously, that is, as the transition zone migrates to the north or the south from present position, it affects water or heat balance between the land and the atmosphere in a considerable degree and has a profound influence on climate in North China. The experiment results in this paper indicate whether in the dry case or in the wet case of the large-scale climatological background field, the surface air temperature in a wide range of the transition zone migration and its surrounding decreases as the transition zone migrates northward. Moreover, the net upward fluxes of the surface long wave radiation and the sensible heat decrease, and the evaporation to the atmosphere increases. As the transition zone migrates southward, the results are opposite. This kind of significant thermal forcing between the land and the atmosphere can excite secondary circulation or circulation cells, which interact with the large-scale circulation systems, changing the atmospheric motion, affecting the water vapor transportation and consequently having an effect on the precipitation.

The Temperature Variation of a Solar Cell in Relation to Its Performance

The temperature of a solar cell subjected to the incident global solar radiation as a function of the local day time is determined. A heat balance equation is solved considering the heat losses due to convection and thermal radiation. The cell efficiency is estimated as a measure of its performance. The results reveal that the temperature within the cell attains significant values. Nevertheless, the temperature dependence of its efficiency along the day time is not pronouncing. It slightly decreases with temperature.

Lift Force at Equatorial Sea Level Due to Compressed Air Dynamics of the Trade Wind’s Boundary Layer

Starting with a recent unconventional explanation of the lift force on a wing, featuring compressibility of the air, an application of the same concept is made to the lift force on the equatorial sea surface due to the Trade Winds, by greatly increasing the spatial scales. If the equatorial sea level does rise up, the northward slope to the sea level should facilitate the poleward flux of summer heat in both the North Pacific and North Atlantic Oceans, as two examples, in accordance with the heat budget requirements of these oceans. Compressed air dynamics consists of Bernoulli’s law applied to the streamlines of the Trade Winds, the force balance between the upward centrifugal force of the curved streamlines at the earth’s surface and a downward pressure force, and the perfect gas law for air.

Water use measurement by non-irrigated Tamarix ramosissima in arid regions of Northwest China

Tamarix ramosissima Ledeb. is a typical hardy desert plant growing in arid regions of Northwest China. Sap flow in stems of Z ramosissima plants were measured continuously to determine the diurnal and seasonal variations of sap flow and to understand the water requirements of this species and the response of sap flow to meteorological factors. This article compared the sap flow rate measured by the heat balance method with the transpiration rate measured by rapid weighing, and validated that heat balance sap flow gauges were reliable for monitoring transpiration. The influence of meteorological factors on stem sap flow during the growing season was： solar radiation 〉 vapor pressure deficit 〉 air temperature 〉 rela- tive humidity 〉 wind speed. Bidirectional sap flows occurred at night, and negative sap flow generally corresponded to high atmospheric humidity. The average error in predicted sap flow rate ranged from -0.78% to 14.00% from June to September and for transpiration the average error was 8.19%. Therefore, based on the functional equations between sap flow and meteorological factors as well as sapwood area, transpiration of an individual plant, and even the stand-level transpiration, can be estimated accurately through extrapolation.

OAKS(QUERCUS SPP.)IN NORTHEAST CHINA

There arc eight species and four varieties of oak in northeast China. This paper reports and describes the distribution and phylocoenogenesis of the Korean pine-broadleaved mixed forest and the mongolian oak formation. The close relationship between the flora of Ussuli—Amur region and Japan is discussed. Analyses of heat and energy balance, and biomass of mongolian oak forests arc provided. Many measurements indicate that, in a nonclosed stand, the wood production of a stand is positively correlated with leaf area index (LAI).

Relationship between Moisture Behavior and Gaseous Volatile Organic Compounds Removal in a Biofiltration System

Studies on the relationship between moisture behavior and gaseous VOCs （Volatile Organic Compounds） removal efficiency of packed tower biofilters are limited. In this research, the nutrient holding capacity, moisture evaporation rate and gaseous toluene and MEK （Methyl Ethyl Ketone） removal efficiencies of bioreactors with porous synthetic resin as the packing material were simultaneously observed. The nutrient holding capacity in one of the reactors was higher than those of the other two because its packing layer was frequently supplied with a nutrient solution by soaking. This reactor exhibited the highest toluene removal efficiency. However, excessive biomass growth was observed in this reactor. The reactor with a less frequent supply of nutrient solution by soaking showed a slightly lower toluene removal efficiency, possibly due to lack of nutrients in the packing layer. The reactor that was fed with the nutrient solution by spraying it onto the packing layer （a common method for supplying moisture） had the lowest toluene removal efficiency, mainly because of the uneven distribution of nutrients. Moreover, the moisture evaporation rate in the packing layer during moisture supply and heat balance were determined.

Comparison of Temperature Field Distribution between Cement Preclinkering Technology and Cement Precalcining Technology

Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology,we studied the characteristics of temperature field distribution of cement preclinkering technology systems including cyclone preheater,preclinkering furnace,and rotary kiln.We used numericalsimulation method to obtain data of temperature field distribution.Some results are found by system study.The ratio of tailcoalof cement preclinkering technology is about 70%,and raw mealtemperature can reach 1070 ℃.Shorter L/D kiln type of preclinkering technology can obtain more stable calcining zone temperature.The highest solid temperature of cement preclinkering technology is higher than 80 ℃,and high temperature region（〉1450 ℃）length is 2 times,which is beneficialfor calcining clinker and higher clinker quality.So cement preclinkering technology can obtain more performance temperature filed,which improves both the solid-phase reaction and liquid-phase reaction.