This research applies experimental measurements and NUBEAM,ONETWO and TRANSP modules to investigate the shine-through(ST)loss ratio and beam heating percentage of neutral beam injection on EAST.Measurements and simula...This research applies experimental measurements and NUBEAM,ONETWO and TRANSP modules to investigate the shine-through(ST)loss ratio and beam heating percentage of neutral beam injection on EAST.Measurements and simulations confirm that the ST loss ratio increases linearly with beam energy,and decreases exponentially with plasma density.Moreover,using the multi-step fitting method,we present analytical quantitative expressions of ST loss ratio and beam heating percentage,which are valuable for the high parameter long-pulse experiments of EAST.展开更多
Hearing loss is the most frequent sensory disorder involving a multitude of factors, and at least 50% of cases are due to genetic etiology. To further characterize the molecular etiology of heating loss in the Chinese...Hearing loss is the most frequent sensory disorder involving a multitude of factors, and at least 50% of cases are due to genetic etiology. To further characterize the molecular etiology of heating loss in the Chinese population, we recruited a total of 135 unrelated patients with nonsyndromic sensorineural hearing loss (NSHL) for mutational screening of GJB2, GJB3, GJB6, SLC26A4, SLC26A5 IVS2-2A〉G and mitochondrial 12SrRNA, tRNASer(t/CN) by PCR amplification and direct DNA sequencing. The carrier frequencies of deafness-causing mutations in these patients were 35.55% in GJB2, 3.70% in GJB6, 15.56% in SLC26A4 and 8.14% in mitochondrial 12SrRNA, respectively. The results indicate the necessity of genetic screening for mutations of these causative genes in Chinese population with nonsyndromic heating loss.展开更多
Neutral beam injection heating is one of the main auxiliary heating methods in controllable nuclear fusion research. In the EAST neutral beam injector, a water flow calorimetry (WFC) system is applied to measure the...Neutral beam injection heating is one of the main auxiliary heating methods in controllable nuclear fusion research. In the EAST neutral beam injector, a water flow calorimetry (WFC) system is applied to measure the heat load on the electrode system of the ion source and the heat loading components of the beamline. Due to the heat loss in the return water pipe, there are some measuring errors for the current WFC system. In this paper, the errors were measured experimentally and analyzed theoretically, which lay a basis for the exact calculation of beam power deposition distribution and neutralization efficiency.展开更多
In this paper,we studied theoretically and numerically heated losses of a flat solar collector to model the solar water heating system for the Kazakhstan climate condition.For different climatic zones with a growing c...In this paper,we studied theoretically and numerically heated losses of a flat solar collector to model the solar water heating system for the Kazakhstan climate condition.For different climatic zones with a growing cost for energy or lack of central heating systems,promising is to find ways to improve the energy efficiency of the solar system.The mathematical model(based on ordinary differential equation)simulated the solar system work process under different conditions.To bridge the modeling and real values results,we studied the important physical parameters such as loss coefficient,Nu,Ra,and Pr values.They impacted the efficiency of flat solar collectors and heat losses of the system.The developed mathematical models,the design and composition of the software and hardware complex,and automated control and monitoring systems allow solar hot water heating systems to increase the energy efficiency of life support systems and heat supply of buildings by reducing energy consumption for heat supply.The simulation result showed that during the daytime,the temperature of water in the collector is 70°C;the storage of heated water since heated water is cooled at night.We defined that a work period of the system can be extended with high efficiency(April-October)for Almaty region.展开更多
In order to understand the characteristics of breakdown process,plasma evolution and spectral emission in liquid jets laser-induced breakdown spectroscopy methods under the influence of the position variation between ...In order to understand the characteristics of breakdown process,plasma evolution and spectral emission in liquid jets laser-induced breakdown spectroscopy methods under the influence of the position variation between laser focus and gas–liquid interface,this work takes the plasma generated by laser-induced liquid jets as the object of study and discusses the changes in the spatial and temporal evolution characteristics and spectral radiation of the plasma when the position parameters between the laser focal point and the gas–liquid interface are different.The initial breakdown position is always between the front interface and the focus when the laser focus moves along the vertical direction of the interface,forming a phenomenon like’interface effect’.The relationship between laser pulse energy and breakdown probability exhibits a law similar to a‘hysteresis curve’in the study of breakdown threshold.In this work,plasma with smaller size,rounder shape,stronger radiation,higher temperature,and higher density can be produced when the focus position is in the liquid column 0.2 mm away from the front interface.Simultaneously,the spectral signal intensity and signal-to-back ratio of the characteristic peaks of target elements in water reach maximum values,and the spectral signal becomes more stable(relative standard deviation value reaches 2%).The Ca element’s ion radiation at 393.366 nm and atomic radiation at 422.673 nm are studied using narrow-band filtering imaging and time-space resolution spectroscopy.The findings demonstrate that the laws of ion and atomic radiation are not perfectly consistent in space and time.展开更多
Background: Currently, there is a significant lack of data concerning long-term outcomes following paediatric cochlear implantation in terms of quality of life. There is a need for a long-term, prospective study in t...Background: Currently, there is a significant lack of data concerning long-term outcomes following paediatric cochlear implantation in terms of quality of life. There is a need for a long-term, prospective study in this regard. This study aims at highlighting the preliminary results, one year post surgery of a five year prospective study. Methods: The CochlearTM Paediatric Implanted Recipient Observational Study (P-IROS) is a prospective, patient outcomes registry for routinely implanted children. The study collects data using questionnaires post-surgery and at regular intervals up to five years. Results: At our Centre, 159 cochlear implant surgery procedures were carried out between January 2014 and December 2014. Category of Auditory Performance II score increased from ‘0' to ‘3' at six months and to ‘5' at 12 months for children aged 0-3 years, although this was not statistically significant. However, the same trend was statistically significant for the age 3-6 year and age 6-10 year brackets. The quality of life of the child improved significantly. Analysis of communication mode revealed a statistically significant overall shift to the auditory-oral mode from total communication. Conclusion: Cochlear implantation is a life-changing intervention. The evidence in support of what it can achieve safely is clear. However, the costs associated with it raise the question if it will remain an effective option for life in all children. The Cochlear P-IROS is an attempt to answer the same over a five year period. Our study in New Delhi, so far concludes that cochlear implantation in a population with limited access to funds is very effective, one year after surgery.展开更多
The structure and stability of non-adiabatic reverse smolder waves are investigated numerically. First, the 1D steady-state responses of reverse smolder waves in the presence of convective heat losses are studied with...The structure and stability of non-adiabatic reverse smolder waves are investigated numerically. First, the 1D steady-state responses of reverse smolder waves in the presence of convective heat losses are studied with the rate of incoming air flow as the control parameter. Based on the 1D steady solutions, the linear stability and the Lewis number effects on the stability are examined by a numerical normal mode analysis. Finally, the dynamical evolution processes of unstable reverse smolder waves are studied by direct numerical simulations. It is shown that, in comparison with the adiabatic case, the presence of heat losses leads to a backward shift of the extinction limit. For varying Lewis numbers, the extinction limit shifts forward with the increase of the Lewis number while the smolder temperature remains unchanged. Furthermore, results of a linear stability analysis show that the maximum growth rate decreases with the increasing Lewis number, implying that increasing the Lewis number tends to weaken the thermal-diffusive instability of non-adiabatic reverse smolder waves. Direct numerical simulation results show that, on the fuel-rich branch, the unstable plane reverse smolder wave gradually develops to a regular steady fingering pattern, whereas on the fuel-lean branch, similar to the adiabatic case, vigorous fragmentation instability occurs, and is accompanied by a substantial local temperature rise, which may be sufficiently high to trigger the transition to flaming combustion.展开更多
Background: Despite its variety of potential applications, the wide implementation of infrared technology in cattle production faces technical, environmental and biological challenges similar to other indicators of m...Background: Despite its variety of potential applications, the wide implementation of infrared technology in cattle production faces technical, environmental and biological challenges similar to other indicators of metabolic state. Nine trials, divided into three classes (technological, environmental and biological factors) were conducted to illustrate the influence of these factors on body surface temperature assessed through infrared imaging. Results: Evaluation of technological factors indicated the following: measurements of body temperatures were strongly repeatable when taken within ]0 s; appropriateness of differing infrared camera technologies was influenced by distance to the target; and results were consistent when analysis of thermographs was compared between judges. Evaluation of environmental factors illustrated that wind and debris caused decreases in body surface temperatures without affecting metabolic rate; additionally, body surface temperature increased due to sunlight but returned to baseline values within minutes of shade exposure. Examination/investigation/exploration of animal factors demonstrated that exercise caused an increase in body surface temperature and metabolic rate. Administration of sedative and anti-sedative caused changes on body surface temperature and metabolic rate, and during late pregnancy a foetal thermal imprint was visible through abdominal infrared imaging. Conclusion: The above factors should be considered in order to standardize operational procedures for taking thermographs, thereby optimizing the use of such technology in cattle operations.展开更多
The pyrolysis behavior of polycarbosilane (PCS) and chemical reaction mechanism during the pyrolysis process were studied by thermogravimetric-mass spectrometry (TG-MS) combined with X-ray diffraction and infrared...The pyrolysis behavior of polycarbosilane (PCS) and chemical reaction mechanism during the pyrolysis process were studied by thermogravimetric-mass spectrometry (TG-MS) combined with X-ray diffraction and infrared spectroscopic analysis methods. The experimental results indicate that the main gas phase products generated during pyrolysis of PCS in nitrogen atmosphere include H2, -CH3 and CH4. The heating rate has a large effect on the pyrolysis process of PCS, the lower heating rate releases more small molecule gases and gets bigger rate of pyrolysis mass loss, demonstrating that the lower heating rate is beneficial to fully pyrolysis of PCS and obtain ceramics products with better microstructure.展开更多
Cement production is a highly energy-intensive process, and the rotary kiln is the most important part of the process. Having a comprehensive model of the kiln in order to reduce manufacturing costs, better performanc...Cement production is a highly energy-intensive process, and the rotary kiln is the most important part of the process. Having a comprehensive model of the kiln in order to reduce manufacturing costs, better performance can be created. In this paper, the influence processes in a simulated cement rotary kiln and operating parameters on the output of the study were to develop and validate the systems using the same batch. The followings were examined: solid phase, gas and coating temperature change in a rotary kiln.展开更多
In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influenc...In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influences of different inner irreversible factors on entransy loss are discussed. We find that the concept of entransy loss can be used to analyze the inner irreversible thermodynamic cycles. Then, we analyze the common heat–work conversion systems with inner irreversible thermodynamic cycles. As an example, the heat–work conversion system in which the working fluid of the thermodynamic cycles is heated and cooled by streams is analyzed. Our analyses show that larger entransy loss leads to larger output work when the total heat flow from the high temperature heat source and the corresponding equivalent temperature are fixed.Some numerical cases are presented, and the results verify the theoretical analyses. On the other hand, it is also found that larger entransy loss does not always lead to larger output work when the preconditions are not satisfied.展开更多
The polarization-dependent loss of UV-written long-period fiber gratings was significantly reduced by increasing the pulse repetition rate of the writing UV beam. The effect is closely related with the enhanced photos...The polarization-dependent loss of UV-written long-period fiber gratings was significantly reduced by increasing the pulse repetition rate of the writing UV beam. The effect is closely related with the enhanced photosensitivity induced by thermal heating.展开更多
The preliminary design of a multi-barrels pellet injector with cycle refrigerator as an advanced plasma-fuelling tool for HL-2A tokamak has been proposed. The design aims at precise temperature control, easy operation...The preliminary design of a multi-barrels pellet injector with cycle refrigerator as an advanced plasma-fuelling tool for HL-2A tokamak has been proposed. The design aims at precise temperature control, easy operation with high reliability and high flexibility. GM-cycle refrigerator and pipe-gun structure have been employed to produce 25 pellets in 25 gun barrels simultaneously and the design aims. have been accomplished. Prime design principle, engineering parameters, structure and layout of the cryostat components as well as calculation of heat load for the cryostat are presented.展开更多
Parabolic trough receiver is a key component to convert solar energy into thermal energy in the parabolic trough solar system.The heat loss of the receiver has an important influence on the thermal efficiency and the ...Parabolic trough receiver is a key component to convert solar energy into thermal energy in the parabolic trough solar system.The heat loss of the receiver has an important influence on the thermal efficiency and the operating cost of the power station.In this paper,conduction and radiation heat losses are analyzed respectively to identify the heat loss mechanism of the receiver.A 2-D heat transfer model is established by using the direct simulation Monte Carlo method for rarefied gas flow and heat transfer within the annulus of the receiver to predict the conduction heat loss caused by residual gases.The numerical results conform to the experimental results,and show the temperature of the glass envelope and heat loss for various conditions in detail.The effects of annulus pressure,gas species,temperature of heat transfer fluid,and annulus size on the conduction and radiation heat losses are systematically analyzed.Besides,the main factors that cause heat loss are analyzed,providing a theoretical basis for guiding the improvement of receiver,as well as the operation and maintenance strategy to reduce heat loss.展开更多
The heat loss and its,distribution are of great importance for the calculation and simulation of COREX process. Based on Baosteel COREX process, a method was applied to measure the heat loss of the furnace shell, the ...The heat loss and its,distribution are of great importance for the calculation and simulation of COREX process. Based on Baosteel COREX process, a method was applied to measure the heat loss of the furnace shell, the accessory equipments and the cooling water system. Then, a static model was established based on the measured heat loss of COREX process. The results showed that the main heat loss of furnace shells took place at the dome of the COREX melter-gasifier and the reducing gas entrance position of the shaft furnace while the main heat loss caused by cooling water occurred at the tap hole area. And the heat loss caused by cooling water accounts for about 85% of the total heat loss in COREX process. The measured total heat loss for producing every 1 t hot metal was 542. 164 MJ, which accounted for about 92 % of the theoretical total heat loss.展开更多
Designing highly-efficient parabolic trough receiver(PTR)contributes to promoting solar thermal utilization and alleviating energy crisis and environmental problems.A novel finned PTR with inner tube(FPTR-IT),which ca...Designing highly-efficient parabolic trough receiver(PTR)contributes to promoting solar thermal utilization and alleviating energy crisis and environmental problems.A novel finned PTR with inner tube(FPTR-IT),which can provide different grades of thermal energy with two heat transfer fluids(oil and water),is designed to improve thermal efficiency.In this FPTR-IT,an inner tube and straight fins are employed to respectively lessen heat loss at upper and lower parts of the absorber.Based on the design,a numerical model is developed to investigate its performance.Comparisons with other PTRs indicate that the FPTR-IT can combine the advantages of PTR with inner tube and finned PTR and obtain the best performance.Moreover,performance evaluation under broad ranges of direct normal irradiances(300–1000 W/m^(2)),flow rates(50–250 L/min)and inlet temperatures(400–600 K)of oil as well as flow rates(3.6–10 L/min)and inlet temperatures(298.15–318.15 K)of water is investigated.Compared with conventional PTR,heat loss is reduced by 20.7%–63.2%and total efficiency is improved by 0.03%–4.27%.Furthermore,the proportions of heat gains for water and oil are located in 8.3%–73.9%and-12.0%–64.3%,while their temperature gains are located in 11.6–37.9 K and-1.2–19.6 K,respectively.Thus,the proposed FPTR-IT may have a promising application prospect in remote arid areas or islands to provide different grades of heat for electricity and freshwater production.展开更多
Thermoelectric devices are one of the technologies used either to generate electricity by applying a temperature difference using thermal energy or as a heating/cooling system by applying an electrical voltage.The num...Thermoelectric devices are one of the technologies used either to generate electricity by applying a temperature difference using thermal energy or as a heating/cooling system by applying an electrical voltage.The number of materials required to produce a product is an important factor in determining its price.Production costs associated with these materials,as well as their availability and quality,play a crucial role in price determination by manufacturers.In this context,a method that employs a uniform volume distribution was implemented.This approach enabled the analysis to focus on other variables,thereby promoting a more precise and relevant evaluation of overall performance.Based on the finite element method,this study investigated the influence of geometric shape,including Rect-leg,Y-leg,Pin-leg and X-leg designs,on the performance of solar thermoelectric generators and thermoelectric coolers.The study was conducted considering the same hot alumina junction surface that receives solar radiation;however,the ef-fective surface,which corresponded to the heat flow area and had a similar area near the exposed surface,varied depending on the chosen leg geometry,thus impacting the heat flux due to the variation in thermal resistance.In the case of a solar thermoelectric generator,the Rect-leg model,having the same effective surface area,presented the lowest heat loss value resulting from convection and radiation in the heat spreader and the hot alumina plate.Under the same conditions,the Y-leg showed the highest value.The Rect-leg design generated,by using thermal and optical concentration,the highest output power of 0.028 and 0.054 W,and efficiency of 3.47%and 4.7%,respectively,whereas the Y-leg generated lower values of 0.006523 and 0.018744 W for power,and 2.83%and 2.71%for efficiency,respectively.In the case of the thermoelectric coolers,the Y-leg generated the highest temperature difference between the hot and cold sides of 67.28 K at an electric current value of 1.8 A,whereas the Rect-leg,Pin-leg and X-leg generated~66.25,~67.02 and~67.19 K at 6.1,2.7 and 2.6 A.展开更多
Energy balances are a general fundamental approach for analyzing the heat requirements for metallurgical processes.The formulation of heat balance equations was involved by computing the various components of heat goi...Energy balances are a general fundamental approach for analyzing the heat requirements for metallurgical processes.The formulation of heat balance equations was involved by computing the various components of heat going in and coming out of the oxygen steelmaking furnace.The developed model was validated against the calculations of Healy and McBride.The overall heat losses that have not been analyzed in previous studies were quantified by back-calculating heat loss from 35 industrial data provided by Tata Steel.The results from the model infer that the heat losses range from 1.3%to 5.9%of the total heat input and it can be controlled by optimizing the silicon in hot metal,the amount of scrap added and the postcombustion ratio.The model prediction shows that sensible heat available from the hot metal accounts for around 66%of total heat input and the rest from the exothermic oxidation reactions.Out of 34%of the heat from exothermic reactions,between 20%and 25%of heat is evolved from the oxidation of carbon to carbon monoxide and carbon dioxide.This model can be applied to predict the heat balance of any top blown oxygen steelmaking technology but needs further validation for a range of oxygen steelmaking operations and conditions.展开更多
This paper proposes a comprehensive thermodynamic and economic model to predict and compare the performance of concentrated solar power plants with traditional and novel receivers with different configurations involvi...This paper proposes a comprehensive thermodynamic and economic model to predict and compare the performance of concentrated solar power plants with traditional and novel receivers with different configurations involving operating temperatures and locations.The simulation results reveal that power plants with novel receivers exhibit a superior thermodynamic and economic performance compared with traditional receivers.The annual electricity productions of power plants with novel receivers in Phoenix,Sevilla,and Tuotuohe are 8.5%,10.5%,and 14.4%higher than those with traditional receivers at the outlet temperature of 550℃.The levelized cost of electricity of power plants with double-selectivecoated receivers can be decreased by 6.9%,8.5%,and 11.6%.In Phoenix,the optimal operating temperature of the power plants is improved from 500℃to 560℃by employing a novel receiver.Furthermore,the sensitivity analysis of the receiver heat loss,solar absorption,and freeze protection temperature is also conducted to analyze the general rule of influence of the receiver performance on power plants performance.Solar absorption has a positive contribution to annual electricity productions,whereas heat loss and freeze protection temperature have a negative effect on electricity outputs.The results indicate that the novel receiver coupled with low melting temperature molten salt is the best configuration for improving the overall performance of the power plants.展开更多
基金Supported by the Collaborative Innovation Program of Hefei Science Center,CAS (Grant No.2019HSC-CIP015)the National Natural Science Foundation of China (Grant Nos.11875290,1170529,11875253,and 11975276)+2 种基金the Fundamental Research Funds for the Central Universities (Grant No.WK3420000004)the Anhui Provincial Natural Science Foundation (Grant No.2008085J04)the National Key Research and Development Program of China (Grant No.2019YFE03020004)。
文摘This research applies experimental measurements and NUBEAM,ONETWO and TRANSP modules to investigate the shine-through(ST)loss ratio and beam heating percentage of neutral beam injection on EAST.Measurements and simulations confirm that the ST loss ratio increases linearly with beam energy,and decreases exponentially with plasma density.Moreover,using the multi-step fitting method,we present analytical quantitative expressions of ST loss ratio and beam heating percentage,which are valuable for the high parameter long-pulse experiments of EAST.
基金supported by the Research Grant Award from the National Natural Science Foundation of China (No.31171217)the Open Research Grant of Medical Key Department (No.XF200719) from Jiangsu Province (No.KF200910)Technology Developmental Program from Nanjing Medical University (No.09NJMUM005)
文摘Hearing loss is the most frequent sensory disorder involving a multitude of factors, and at least 50% of cases are due to genetic etiology. To further characterize the molecular etiology of heating loss in the Chinese population, we recruited a total of 135 unrelated patients with nonsyndromic sensorineural hearing loss (NSHL) for mutational screening of GJB2, GJB3, GJB6, SLC26A4, SLC26A5 IVS2-2A〉G and mitochondrial 12SrRNA, tRNASer(t/CN) by PCR amplification and direct DNA sequencing. The carrier frequencies of deafness-causing mutations in these patients were 35.55% in GJB2, 3.70% in GJB6, 15.56% in SLC26A4 and 8.14% in mitochondrial 12SrRNA, respectively. The results indicate the necessity of genetic screening for mutations of these causative genes in Chinese population with nonsyndromic heating loss.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2013GB101001)the International Science&Technology Cooperation Program of China(No.2014DFG61950)
文摘Neutral beam injection heating is one of the main auxiliary heating methods in controllable nuclear fusion research. In the EAST neutral beam injector, a water flow calorimetry (WFC) system is applied to measure the heat load on the electrode system of the ion source and the heat loading components of the beamline. Due to the heat loss in the return water pipe, there are some measuring errors for the current WFC system. In this paper, the errors were measured experimentally and analyzed theoretically, which lay a basis for the exact calculation of beam power deposition distribution and neutralization efficiency.
基金Thisworkwas supported by the Ministry of Education and Science of theRepublic of Kazakhstan BR10965172。
文摘In this paper,we studied theoretically and numerically heated losses of a flat solar collector to model the solar water heating system for the Kazakhstan climate condition.For different climatic zones with a growing cost for energy or lack of central heating systems,promising is to find ways to improve the energy efficiency of the solar system.The mathematical model(based on ordinary differential equation)simulated the solar system work process under different conditions.To bridge the modeling and real values results,we studied the important physical parameters such as loss coefficient,Nu,Ra,and Pr values.They impacted the efficiency of flat solar collectors and heat losses of the system.The developed mathematical models,the design and composition of the software and hardware complex,and automated control and monitoring systems allow solar hot water heating systems to increase the energy efficiency of life support systems and heat supply of buildings by reducing energy consumption for heat supply.The simulation result showed that during the daytime,the temperature of water in the collector is 70°C;the storage of heated water since heated water is cooled at night.We defined that a work period of the system can be extended with high efficiency(April-October)for Almaty region.
基金supported by Natural Science Foundation of Shandong Province(Nos.ZR201910290171 and ZR2019MD 016)National Key Research and Development Program of China(No.2016YFC0302101)National Natural Science Foundation of China(No.41976173)。
文摘In order to understand the characteristics of breakdown process,plasma evolution and spectral emission in liquid jets laser-induced breakdown spectroscopy methods under the influence of the position variation between laser focus and gas–liquid interface,this work takes the plasma generated by laser-induced liquid jets as the object of study and discusses the changes in the spatial and temporal evolution characteristics and spectral radiation of the plasma when the position parameters between the laser focal point and the gas–liquid interface are different.The initial breakdown position is always between the front interface and the focus when the laser focus moves along the vertical direction of the interface,forming a phenomenon like’interface effect’.The relationship between laser pulse energy and breakdown probability exhibits a law similar to a‘hysteresis curve’in the study of breakdown threshold.In this work,plasma with smaller size,rounder shape,stronger radiation,higher temperature,and higher density can be produced when the focus position is in the liquid column 0.2 mm away from the front interface.Simultaneously,the spectral signal intensity and signal-to-back ratio of the characteristic peaks of target elements in water reach maximum values,and the spectral signal becomes more stable(relative standard deviation value reaches 2%).The Ca element’s ion radiation at 393.366 nm and atomic radiation at 422.673 nm are studied using narrow-band filtering imaging and time-space resolution spectroscopy.The findings demonstrate that the laws of ion and atomic radiation are not perfectly consistent in space and time.
文摘Background: Currently, there is a significant lack of data concerning long-term outcomes following paediatric cochlear implantation in terms of quality of life. There is a need for a long-term, prospective study in this regard. This study aims at highlighting the preliminary results, one year post surgery of a five year prospective study. Methods: The CochlearTM Paediatric Implanted Recipient Observational Study (P-IROS) is a prospective, patient outcomes registry for routinely implanted children. The study collects data using questionnaires post-surgery and at regular intervals up to five years. Results: At our Centre, 159 cochlear implant surgery procedures were carried out between January 2014 and December 2014. Category of Auditory Performance II score increased from ‘0' to ‘3' at six months and to ‘5' at 12 months for children aged 0-3 years, although this was not statistically significant. However, the same trend was statistically significant for the age 3-6 year and age 6-10 year brackets. The quality of life of the child improved significantly. Analysis of communication mode revealed a statistically significant overall shift to the auditory-oral mode from total communication. Conclusion: Cochlear implantation is a life-changing intervention. The evidence in support of what it can achieve safely is clear. However, the costs associated with it raise the question if it will remain an effective option for life in all children. The Cochlear P-IROS is an attempt to answer the same over a five year period. Our study in New Delhi, so far concludes that cochlear implantation in a population with limited access to funds is very effective, one year after surgery.
基金Project supported by the Shanghai Rising Star Program (No. 09QA1402300)the Scientific Research Innovation Program of Shanghai Education Commission
文摘The structure and stability of non-adiabatic reverse smolder waves are investigated numerically. First, the 1D steady-state responses of reverse smolder waves in the presence of convective heat losses are studied with the rate of incoming air flow as the control parameter. Based on the 1D steady solutions, the linear stability and the Lewis number effects on the stability are examined by a numerical normal mode analysis. Finally, the dynamical evolution processes of unstable reverse smolder waves are studied by direct numerical simulations. It is shown that, in comparison with the adiabatic case, the presence of heat losses leads to a backward shift of the extinction limit. For varying Lewis numbers, the extinction limit shifts forward with the increase of the Lewis number while the smolder temperature remains unchanged. Furthermore, results of a linear stability analysis show that the maximum growth rate decreases with the increasing Lewis number, implying that increasing the Lewis number tends to weaken the thermal-diffusive instability of non-adiabatic reverse smolder waves. Direct numerical simulation results show that, on the fuel-rich branch, the unstable plane reverse smolder wave gradually develops to a regular steady fingering pattern, whereas on the fuel-lean branch, similar to the adiabatic case, vigorous fragmentation instability occurs, and is accompanied by a substantial local temperature rise, which may be sufficiently high to trigger the transition to flaming combustion.
基金the Beef Producers of Ontario,Ontario Ministry of Agriculture and Rural Affairs,Beef Cattle Research Council and Agri-Food Canada for financial support
文摘Background: Despite its variety of potential applications, the wide implementation of infrared technology in cattle production faces technical, environmental and biological challenges similar to other indicators of metabolic state. Nine trials, divided into three classes (technological, environmental and biological factors) were conducted to illustrate the influence of these factors on body surface temperature assessed through infrared imaging. Results: Evaluation of technological factors indicated the following: measurements of body temperatures were strongly repeatable when taken within ]0 s; appropriateness of differing infrared camera technologies was influenced by distance to the target; and results were consistent when analysis of thermographs was compared between judges. Evaluation of environmental factors illustrated that wind and debris caused decreases in body surface temperatures without affecting metabolic rate; additionally, body surface temperature increased due to sunlight but returned to baseline values within minutes of shade exposure. Examination/investigation/exploration of animal factors demonstrated that exercise caused an increase in body surface temperature and metabolic rate. Administration of sedative and anti-sedative caused changes on body surface temperature and metabolic rate, and during late pregnancy a foetal thermal imprint was visible through abdominal infrared imaging. Conclusion: The above factors should be considered in order to standardize operational procedures for taking thermographs, thereby optimizing the use of such technology in cattle operations.
基金Funded by the Natural Science Foundation of Hubei Province(No.2013CFB340)
文摘The pyrolysis behavior of polycarbosilane (PCS) and chemical reaction mechanism during the pyrolysis process were studied by thermogravimetric-mass spectrometry (TG-MS) combined with X-ray diffraction and infrared spectroscopic analysis methods. The experimental results indicate that the main gas phase products generated during pyrolysis of PCS in nitrogen atmosphere include H2, -CH3 and CH4. The heating rate has a large effect on the pyrolysis process of PCS, the lower heating rate releases more small molecule gases and gets bigger rate of pyrolysis mass loss, demonstrating that the lower heating rate is beneficial to fully pyrolysis of PCS and obtain ceramics products with better microstructure.
文摘Cement production is a highly energy-intensive process, and the rotary kiln is the most important part of the process. Having a comprehensive model of the kiln in order to reduce manufacturing costs, better performance can be created. In this paper, the influence processes in a simulated cement rotary kiln and operating parameters on the output of the study were to develop and validate the systems using the same batch. The followings were examined: solid phase, gas and coating temperature change in a rotary kiln.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51376101 and 51356001)
文摘In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influences of different inner irreversible factors on entransy loss are discussed. We find that the concept of entransy loss can be used to analyze the inner irreversible thermodynamic cycles. Then, we analyze the common heat–work conversion systems with inner irreversible thermodynamic cycles. As an example, the heat–work conversion system in which the working fluid of the thermodynamic cycles is heated and cooled by streams is analyzed. Our analyses show that larger entransy loss leads to larger output work when the total heat flow from the high temperature heat source and the corresponding equivalent temperature are fixed.Some numerical cases are presented, and the results verify the theoretical analyses. On the other hand, it is also found that larger entransy loss does not always lead to larger output work when the preconditions are not satisfied.
文摘The polarization-dependent loss of UV-written long-period fiber gratings was significantly reduced by increasing the pulse repetition rate of the writing UV beam. The effect is closely related with the enhanced photosensitivity induced by thermal heating.
文摘The preliminary design of a multi-barrels pellet injector with cycle refrigerator as an advanced plasma-fuelling tool for HL-2A tokamak has been proposed. The design aims at precise temperature control, easy operation with high reliability and high flexibility. GM-cycle refrigerator and pipe-gun structure have been employed to produce 25 pellets in 25 gun barrels simultaneously and the design aims. have been accomplished. Prime design principle, engineering parameters, structure and layout of the cryostat components as well as calculation of heat load for the cryostat are presented.
基金funded by the National Key R&D Program of China(No.2019YFE0102000)the National Natural Science Foundation of China(Grant No.51476165).
文摘Parabolic trough receiver is a key component to convert solar energy into thermal energy in the parabolic trough solar system.The heat loss of the receiver has an important influence on the thermal efficiency and the operating cost of the power station.In this paper,conduction and radiation heat losses are analyzed respectively to identify the heat loss mechanism of the receiver.A 2-D heat transfer model is established by using the direct simulation Monte Carlo method for rarefied gas flow and heat transfer within the annulus of the receiver to predict the conduction heat loss caused by residual gases.The numerical results conform to the experimental results,and show the temperature of the glass envelope and heat loss for various conditions in detail.The effects of annulus pressure,gas species,temperature of heat transfer fluid,and annulus size on the conduction and radiation heat losses are systematically analyzed.Besides,the main factors that cause heat loss are analyzed,providing a theoretical basis for guiding the improvement of receiver,as well as the operation and maintenance strategy to reduce heat loss.
基金Item Sponsored by National Natural Science Foundation of China(U1260202)Specialized Research Fund for Doctoral Program of Higher Education of China(20120006110002)
文摘The heat loss and its,distribution are of great importance for the calculation and simulation of COREX process. Based on Baosteel COREX process, a method was applied to measure the heat loss of the furnace shell, the accessory equipments and the cooling water system. Then, a static model was established based on the measured heat loss of COREX process. The results showed that the main heat loss of furnace shells took place at the dome of the COREX melter-gasifier and the reducing gas entrance position of the shaft furnace while the main heat loss caused by cooling water occurred at the tap hole area. And the heat loss caused by cooling water accounts for about 85% of the total heat loss in COREX process. The measured total heat loss for producing every 1 t hot metal was 542. 164 MJ, which accounted for about 92 % of the theoretical total heat loss.
基金supported by the China Postdoctoral Science Foundation(Grant No.2020M672344)。
文摘Designing highly-efficient parabolic trough receiver(PTR)contributes to promoting solar thermal utilization and alleviating energy crisis and environmental problems.A novel finned PTR with inner tube(FPTR-IT),which can provide different grades of thermal energy with two heat transfer fluids(oil and water),is designed to improve thermal efficiency.In this FPTR-IT,an inner tube and straight fins are employed to respectively lessen heat loss at upper and lower parts of the absorber.Based on the design,a numerical model is developed to investigate its performance.Comparisons with other PTRs indicate that the FPTR-IT can combine the advantages of PTR with inner tube and finned PTR and obtain the best performance.Moreover,performance evaluation under broad ranges of direct normal irradiances(300–1000 W/m^(2)),flow rates(50–250 L/min)and inlet temperatures(400–600 K)of oil as well as flow rates(3.6–10 L/min)and inlet temperatures(298.15–318.15 K)of water is investigated.Compared with conventional PTR,heat loss is reduced by 20.7%–63.2%and total efficiency is improved by 0.03%–4.27%.Furthermore,the proportions of heat gains for water and oil are located in 8.3%–73.9%and-12.0%–64.3%,while their temperature gains are located in 11.6–37.9 K and-1.2–19.6 K,respectively.Thus,the proposed FPTR-IT may have a promising application prospect in remote arid areas or islands to provide different grades of heat for electricity and freshwater production.
文摘Thermoelectric devices are one of the technologies used either to generate electricity by applying a temperature difference using thermal energy or as a heating/cooling system by applying an electrical voltage.The number of materials required to produce a product is an important factor in determining its price.Production costs associated with these materials,as well as their availability and quality,play a crucial role in price determination by manufacturers.In this context,a method that employs a uniform volume distribution was implemented.This approach enabled the analysis to focus on other variables,thereby promoting a more precise and relevant evaluation of overall performance.Based on the finite element method,this study investigated the influence of geometric shape,including Rect-leg,Y-leg,Pin-leg and X-leg designs,on the performance of solar thermoelectric generators and thermoelectric coolers.The study was conducted considering the same hot alumina junction surface that receives solar radiation;however,the ef-fective surface,which corresponded to the heat flow area and had a similar area near the exposed surface,varied depending on the chosen leg geometry,thus impacting the heat flux due to the variation in thermal resistance.In the case of a solar thermoelectric generator,the Rect-leg model,having the same effective surface area,presented the lowest heat loss value resulting from convection and radiation in the heat spreader and the hot alumina plate.Under the same conditions,the Y-leg showed the highest value.The Rect-leg design generated,by using thermal and optical concentration,the highest output power of 0.028 and 0.054 W,and efficiency of 3.47%and 4.7%,respectively,whereas the Y-leg generated lower values of 0.006523 and 0.018744 W for power,and 2.83%and 2.71%for efficiency,respectively.In the case of the thermoelectric coolers,the Y-leg generated the highest temperature difference between the hot and cold sides of 67.28 K at an electric current value of 1.8 A,whereas the Rect-leg,Pin-leg and X-leg generated~66.25,~67.02 and~67.19 K at 6.1,2.7 and 2.6 A.
文摘Energy balances are a general fundamental approach for analyzing the heat requirements for metallurgical processes.The formulation of heat balance equations was involved by computing the various components of heat going in and coming out of the oxygen steelmaking furnace.The developed model was validated against the calculations of Healy and McBride.The overall heat losses that have not been analyzed in previous studies were quantified by back-calculating heat loss from 35 industrial data provided by Tata Steel.The results from the model infer that the heat losses range from 1.3%to 5.9%of the total heat input and it can be controlled by optimizing the silicon in hot metal,the amount of scrap added and the postcombustion ratio.The model prediction shows that sensible heat available from the hot metal accounts for around 66%of total heat input and the rest from the exothermic oxidation reactions.Out of 34%of the heat from exothermic reactions,between 20%and 25%of heat is evolved from the oxidation of carbon to carbon monoxide and carbon dioxide.This model can be applied to predict the heat balance of any top blown oxygen steelmaking technology but needs further validation for a range of oxygen steelmaking operations and conditions.
基金the National Natural Science Foundation of China(Grant Nos.51776193 and 5171101721)the Fundamental Research Funds for the Central Universities(No.WK6030000133).
文摘This paper proposes a comprehensive thermodynamic and economic model to predict and compare the performance of concentrated solar power plants with traditional and novel receivers with different configurations involving operating temperatures and locations.The simulation results reveal that power plants with novel receivers exhibit a superior thermodynamic and economic performance compared with traditional receivers.The annual electricity productions of power plants with novel receivers in Phoenix,Sevilla,and Tuotuohe are 8.5%,10.5%,and 14.4%higher than those with traditional receivers at the outlet temperature of 550℃.The levelized cost of electricity of power plants with double-selectivecoated receivers can be decreased by 6.9%,8.5%,and 11.6%.In Phoenix,the optimal operating temperature of the power plants is improved from 500℃to 560℃by employing a novel receiver.Furthermore,the sensitivity analysis of the receiver heat loss,solar absorption,and freeze protection temperature is also conducted to analyze the general rule of influence of the receiver performance on power plants performance.Solar absorption has a positive contribution to annual electricity productions,whereas heat loss and freeze protection temperature have a negative effect on electricity outputs.The results indicate that the novel receiver coupled with low melting temperature molten salt is the best configuration for improving the overall performance of the power plants.