Characterization of Nutrients,Heavy Metals,Petroleum and Their Impact on Phytoplankton in Laizhou Bay:Implications for Environmental Management and Monitoring

The Laizhou Bay(LB)represents a substantial ecological area that is vulnerable to human activities and confronts diverse environmental challenges.This study provides a comprehensive characterization of nutrients,petroleum,heavy metals,and phytoplankton community structure across seven distinct areas in LB.The results indicate relatively high concentrations of NO_(2)-N,SiO_(4)-Si,and NO_(3)-N in the Southwest Laizhou Bay(SWLB)and Huanghe River Estuary(HRE).In contrast,the East Laizhou bay(ELB)and the North of Huanghe River Estuary(NHRE)exhibit the highest concentrations of heavy metals(As,Cr and Hg).The areas with high phytoplankton density and community diversity are mainly located in the SWLB.After adjusting for basic environmental factors,phytoplankton density and Margalef richness index D are significantly associated with nutrients(NO_(3)-N,NO_(2)-N,NH_(4)-N,SiO_(4)-Si),and heavy metal(Cr)concentrations.We highlight that,in addition to Xiaoqinghe River,nutrients brought by the Mihe River in the SWLB and heavy metal(Cr)pollution in the ELB resulting from industrial and mining activities along the coast significantly influence phytoplankton growth and community structure.Therefore,it is recommended that more monitoring and management efforts be focused on these regions in the future.

Heavy metal pollution of river water and eco-friendly remediation using potent microalgal species

Pollution of rivers is mainly caused by anthropogenic activities such as discharge of effluent from industrial facilities,maintenance of sewage/effluent treatment plants,and dumping of solid waste on river banks.This study dealt with the pollution issues of the Cooum River in the well-known city of Chennai in South India.Water samples from 27 locations were collected and analyzed for 12 elements,including Ba,B,and Al,as well as heavy metals such as Pb,Cr,Mn,Fe,Co,Ni,Cu,Zn,and Cd.The samples showed levels of these elements that exceeded World Health Organization recommendations.Pearson correlation analysis revealed the inter-dependency among elements,and the contribution of each element based on factor loadings showed its percentage contribution compared to others.Water samples from six significant locations were chosen for remediation with three algae:Chlorella vulgaris,Scenedesmus dimorphus,and Phormedium sp.The uptake of pollutants led to the continuous growth of algae during the incubation period of 15 d,effectively removing heavy metals from the river water.The increasing levels of algal counts and the chlorophyll a content confirmed the algal growth during the incubation period,followed by a declining stage after the incubation period.The scanning electron microscopic images of algae before and after the remediation showed no remarkable modification of morphological patterns.This study showed that the uptake of heavy metals using algae is an effective water pollution remediation measure,making the process practicable in the field on a large scale in the near future.

Analysis and Assessment on the Heavy Metals in a Severely Degraded Subtropical Red Soil Region

5 different forests of Pinus massoniana, Schima superba, Liquidambar formosana, P. massoniana × S. superba, P. massoniana × L. formosana as the research object were set up to study the Cr, Cu and Zn content of degraded red soil region in subtropics. The soil heavy metal pollution degree was evaluated by national environmental quality standard (II class). The results showed that three soil metals of P. massoniana × S. superba were the highest, and the soil metals enrichment ability was strong. The order of single factor pollution index of metal elements was Cu (1.38) > Cr (0.81) > Zn (0.42), and moderately pollution, pollution warning and no pollution, respectively. There was no significant correlation between three soil heavy metals and soil total carbon (TC), total nitrogen (TN) and total phosphorus (TP). These results suggested that the accumulation of heavy metal elements was not derived from the parent material of soil. There was a significant positive correlation between the three metal elements which indicated that the sources of the three elements were similar. The structural equation model showed that the direct and indirect effects among the influencing factors ultimately affected the activity of heavy metals by cascade effects.

Accumulation of Heavy Metals in Maga-Pouss Rice Fields (Far-North Region, Cameroon) and Transfer to Rice Grains

Monitoring of heavy metals contamination of agricultural products and their transfer and bioaccumulation in crops like rice has become a hot topic worldwide over the last two decades. The present study was carried out to determine the accumulation of heavy metals in rice fields and their transfer to rice grains. Soil, irrigation water and rice grains samples were gathered in Maga-Pouss, Far-North, Cameroon. Concentrations of six heavy metals (lead, cadmium, zinc, copper, iron and mercury) were evaluated by Atomic Absorption Spectrophotometer (AAS). Mercury was not detected in this study. Average concentrations of metals were in this order (in mg/kg): Fe (188.60 ± 97.06) > Pb (63.63 ± 7.11) > Cd (2.59 ± 0.29) > Zn (1.10 ± 1.05) > Cu (0.80 ± 0.73) in water and Pb (105.50 ± 31.11) > Fe (105.50 ± 31.11) > Cu (45.93 ± 14.39) > Zn (22.52 ± 6.40) > Cd (3.15 ± 0.49) in soil. Water in Maga-Pouss rice fields appears to be more harmful than the soil, notably for lead, cadmium and copper. In rice grains, heavy metals were found in this order (mg/kg): Fe (188.01 ± 82.62) > Cu (27.20 ± 0.00) > Zn (23.61 ± 12.42) > Pb (19.50 ± 19.91) > Cd (2.02 ± 1.05). The mean bioconcentration factor (BCF) of metals from soil to rice grains was in the following order: Fe (2.60) > Zn (1.05) > Cd (0.64) > Cu (0.59) > Pb (0.18). From water to rice grains, the order is: Cu (37.26) > Zn (22.49) > Cd (6.97) > Pb (2.74) > Fe (1.94). Rice field pH and electrical conductivity favored the uptake of lead, copper and cadmium by rice grains. The findings of this study will be good documentation for risk assessment, and decision-making by environmental managers in this region.

Assessment of Heavy Metals Contamination of Topsoil and Street Dust around Cement Factory in Southern Jordan

Evaluation of assessment of the metal processes governing the metals distribution in soil and dust samples is very significant and protects the health of human and ecological system. Recently, special attention has given to the assessment of metals pollution impact on soil and dust within industrial areas. This study aims to assess the metal contamination levels in the topsoil and street dust around the cement factory in Qadissiya area, southern Jordan. The levels of seven metals (namely Fe, Zn, Cu, Pb, Cr, Cd, and Mn) were analyzed using Flame Atomic Absorption Spec-trophotometer (FAAS) to monitor, evaluate, and to compare topsoil and road dust pollution values of metals of the different types of urban area. The physicochemical parameters which believed to affect the mobility of metals in the soil of the study area were determined such as pH, EC, TOM, CaCO3 and CEC. The levels of metal in soil samples are greater on the surface but decrease in the lower part as a result of the basic nature of soil. The mean values of the metals in soil can be arranged in the following order: Zn > Pb > Mn > Fe > Cu > Cr > Cd. The relatively high concentration of metals in the soil sample was attributed to anthropogenic activities such as traffic emissions, cement factory and agricultural activities. Correlation coefficient analysis and the spatial distribution of indices and the results of statistical analysis indicate three groups of metals: Fe and Mn result by natural origin, Zn, Pb, Cu and Zn result by anthropogenic origin (mainly motor vehicle traffic and abrasion of tires) while Cd is mixed origin. The higher content level values of metals of anthropogenic source in soil samples indicate that it is a source of contamination of air in the studied area. .

Evaluation of Agricultural Contamination Level by Heavy Metals and Pesticides in Sediments of Rivers and Water Bodies for Shrimp Fishing in the Lower Ouémé: Case of the Aguigadji, Ahlan and Sele Stations in Benin

This study assessed sediment contamination by heavy metals and pesticide active ingredients linked to chemical inputs used in agricultural activities in the lower Ouémé. Pesticide residues from the organochlorine, pyrethroid and organophosphorus families were investigated by gas chromatography, and heavy metals (Cd, Pb, As, Ni, Zn, Fe, Mg, Cr and Hg) by atomic absorption spectrophotometry. The metallic pollution indices, the contamination factor (CF) and the ecological risk index were calculated. The results revealed 8 active ingredients in the rainy season and 9 in the dry season. Glyphosate was the active ingredient with the highest concentration at all stations, 9.65 ± 0.84 mg/kg recorded in the dry season at the Aguigadji station. All glyphosate values were above the EQS. DDT, Atrazine and Endosulfan also showed high concentrations in the dry and rainy seasons. Emamectin, Abamectin and Lambda Cyhalothrin also showed high concentrations in the dry season at Aguigadji, Ahlan and Sele. Only glyphosate was recorded at the control station (Toho), but in very low concentrations. Lead showed the highest concentrations at all the stations, 265.96 ± 21.02 mg/Kg in the rainy season and 255.38 ± 79.09 mg/Kg in the dry season, all detected at the Aguigadji station and above the EQS. Zn, Ni, Fe, Cu and Cr were all representative in both the dry and rainy seasons at the contaminated stations. Manganese showed high concentrations in the rainy season. Pb showed very high contamination (FC ≥ 6) at the Aguigadji and Ahlan stations and significant contamination (3 ≤ FC 6) at the Sele station in both the rainy and dry seasons. Ni, Hg and Cd, showed either moderate or significant contamination at the contaminated stations. The risk values showed a considerable ecological Ri (190 ≤ Ri < 380) in the rainy season and a moderate ecological Ri (95 ≤ Ri < 190) in the dry season at these contaminated stations.

Heavy Metal Levels and Ecological Risk in Crude Oil-Contaminated Soils from Okpare-Olomu, Niger Delta, Nigeria

Crude oil spills have inflicted extensive disruption upon the Niger Delta ecosystem, resulting in crop loss and severe environmental damage. Such spills exacerbate heavy metal concentration within soil due to the presence of metallic ions. The Okpare-Olomu community has borne the brunt of crude oil pollution from illicit bunkering, sabotage, and equipment malfunction. This study targets an evaluation of ecological hazards linked to heavy metals (HMs) in crude oil impacted agriculturally soils within Okpare-Olomu in Ughelli South LGA of Delta State. In this study, 24 topsoil samples were obtained from areas affected by crude oil pollution;the heavy metal content was evaluated through atomic absorption spectrometry. The concentration ranges for HMs (mg/kg) in soil were: 24.1 - 23,174 (Cu);0.54 - 37.1 (Cd);9.05 - 54 (Cr);12 - 174 (Ni);18.5 - 8611 (Pb);and 148 - 9078 (Zn) at a soil depth of 0 - 15 cm. Notably, metal concentrations were recorded to be above permissible World Health Organization limits. Predominantly, Zn and Pb recorded higher heavy metal concentration when compared to other heavy metals analysed, notably at sampling points PT7 through PT24. Zinc and Pb contamination exhibited highly significant contamination factors, and contamination severity was evidenced across all sample points, signifying a grave risk level. Pollution load indices indicated pervasive extreme pollution levels. Geoaccumulation indices signaled moderate to strong pollution, mainly by Pb and Zn. Ecological risk assessments revealed variable levels of heavy metal contamination, from low to very high, with potential ecological risk reflecting markedly elevated levels. This study underscores the imperative for soil remediation to rectify ecological imbalances in agriculturally affected soil constituents.

Spatial distribution and potential ecological and health risks associated with heavy metals in the Ijero-Ekiti mining site,Nigeria

Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-term effects on economy,environment,and society.This study collected soil samples from 16 sample points including a control point to examine the pollution degrees and spatial distribution of heavy metals,as well as ecological and health risks associated with heavy metal pollution in the Ijero-Ekiti mining site,Nigeria.Geographical Information System(GIS)and remote sensing technologies were used to identify regions with high concentrations of heavy metals and assess the environmental impact of gold mining activities.The results show that the mean heavy metal concentrations of 16 soil pointa are 8.94(±5.97)mg/kg for As,0.18(±0.54)mg/kg for Cd,0.11(±1.06)mg/kg for Co,14.32(±3.43)mg/kg for Cr,6.89(±0.64)mg/kg for Cu,48.92(±11.77)mg/kg for Fe,135.81(±30.75)mg/kg for Mn,5.92(±0.96)mg/kg for Ni,5.72(±1.66)mg/kg for Pb,and 13.94(±1.38)mg/kg for Zn.The study reveals that heavy metal concentration in soils follows the order of Mn>Fe>Cr>Zn>As>Cu>Ni>Pb>Co>Cd.An analysis of soil samples indicates that 3 principal components(PCs)account for 70.008%of the total variance and there are strong positive correlations between various pairs of heavy metals.The total potential ecological risk index(309.599)in the study area is high.Non-carcinogenic risk suggests that there may be long-term health impacts on people who work in the mining areas due to chronic exposure to the environment.Based on the study,the hazard index of carcinogenic health risks associated with heavy metals through ingestion is 520.00×10^(–4).Dermal contact from As and Cr also increases the risk of cancer,with the highest hazard index value of 18.40×10^(–4).The lowest exposure pathway,with the hazard index value of 0.68×10^(–4),indicates that the inhalation of heavy metals has a comparatively low risk of cancer.This study recommends the formulation of policies to monitor the Ijero-Ekiti mining site and other regions in Nigeria where indiscriminate artisanal gold mining activities exist.

Progress in the Treatment of Heavy Metal Pollution of Water Sediment

In recent years,as China's industrialization process and urban-rural integration strategy have continued to deepen,some industrial and domestic wastewater has been discharged directly into rivers without effective treatment.This has resulted in the continuous accumulation and enrichment of pollutants in water bodies.This phenomenon results in a significant accumulation of heavy metals in the sediment of water bodies,which not only represents a significant threat to the ecological environment but also ultimately poses a risk to human health.The objective of this study is to provide a comprehensive review of the current status of heavy metal pollution in water sediment in China.In addition,this paper analyzes the advantages and limitations of existing techniques for the harmless treatment of heavy metal pollution and forecasts the development direction of this field.

Health risk assessment of heavy metal pollution in groundwater of a karst basin,SW China

To investigate the presence of metal elements and assess their health risk for the populace in the Nandong Underground River Basin(NURB),we conducted an analysis of eleven common heavy metals in the water body.A Health risk assessment(HRA)model was employed to analyze 84 water samples from the NURB.The detection results revealed the following order of heavy metals concentrations:Fe>Al>Mn>Zn>As>Cd>Pb>Cr>Ni>Cu>Hg.Correlation analysis indicated a certain similarity in material source and migration transformation among these eleven metal elements.Our study identified that the health risks for local residents exposed to metal elements in the water of NURB primarily stem from carcinogenic risk(10^(−6)–10^(−4)a^(−1))through the drinking water pathway.Moreover,the health risk of heavy metal exposure for children through drinking water was notably higher than for adults.The maximum health risks of Cr in both underground and surface water exceeded the recommendation standard(5.0×10^(−5)a^(−1))from ICRP,surpassing the values recommended by the Swedish Environmental Protection Agency,the Dutch Ministry of Construction and Environment and the British Royal Society(5.0×10^(−6)a^(−1)).The results of the health risk assessment indicate that Cr in the water of NURB is the primary source of carcinogenic risk for local residents,followed by Cd and As.Consequently,it is imperative to control these three carcinogenic metals when the water was used as drinking water resource.

Harmful evaluation of heavy metals from soil layer to the groundwater: Take the Jilin Hunchun Basin as an example

The continuous enrichment of heavy metals in soils has caused potential harm to groundwater.Quantitative methods to evaluate the harm of heavy metals in soil to groundwater are lacked in previous studies.Based on the theory of groundwater circulation and solid-liquid equilibrium,a simple and easy-touse flux model of soil heavy metals migrating to groundwater is constructed.Based on groundwater environmental capacity,an innovative method for evaluating the harm of heavy metals in soil to groundwater is proposed,which has been applied in Hunchun Basin,Jilin Province,China.The results show that the fluxes of soil heavy metals into groundwater in the study area are Zn,Cu,As,Pb,Cd,Ni,and Hg in descending order.The content of heavy metals in groundwater(As,Hg,Cu,Pb,Zn,Ni,and Cd)in most areas has not risen to the threshold of environmental capacity within 10 years.The harm levels of soil heavy metals to groundwater in the most townships soils are at the moderate level or below.This evaluation method can quantify the flux of soil heavy metals into groundwater simply and quickly,determine the residual capacity of groundwater to heavy metals,evaluate the harm level of soil heavy metals to groundwater,provide support for relevant departments to carry out environmental protection of soil and groundwater,and provide a reference to carry out similar studies for related scholars.

Heavy Metal Remediation in AgoèNyivéLandfill Soils: Enhancing Stability through Organic Amendments

The burial of waste in developing countries, which is often carried out without respect for environmental standards, constitutes a risk of contamination of soils and even groundwater given the toxic elements they contain. The objective of this work is to carry out a study of the retention of heavy metals through the contribution of cattle manure to soil samples from the final Agoè Nyivé landfill in Lomé, Togo. Soil samples from the final landfill were taken from the surface and depth at several locations to form a composite sample. The amendment of the composite sample was carried out with bovine manure on the mock-up in the Laboratory for six months. The determination of the total contents of heavy metals by the atomic absorption spectrophotometer (SAA) on the composite sample showed high contents exceeding the thresholds recommended by the AFNOR NF U 44-041 standard. Sequential extraction on these composite samples showed that the mobile portions of lead, cadmium, copper and zinc are respectively estimated at 78.06%, 50%, 28.89% and 91.59%. The bovine manure used to amend the landfill samples presents physicochemical parameters that can contribute to rendering heavy metals immobile in the soil matrix under natural conditions. The addition of manure initially made it possible to increase the values of pH, electrical conductivity, cation exchange capacity and organic matter, which promote the retention of heavy metals. Secondly, the addition of manure made it possible to reduce the mobile portion of the heavy metals studied;from 78.06% to 14.39% for lead, from 50% to 11.52% for cadmium, from 28.89% to almost 0% for copper and from 91.15% to 80.58% for zinc. The use of cattle manure as an amendment on the composite sample was decisive in reducing the mobility of heavy metals in the polluted soils of the final landfill.

Heavy Metals in Agricultural Soils of Constanza, Jarabacoa, San José de Ocoa, Azua, Barahona and San Juan de la Maguana, Dominican Republic, 2022

The objective of this study was to establish a baseline for future studies that aim to determine possible contamination from human, agricultural and industrial activities. As well as the determination of the indices of environmental or geological contamination and enrichment factors of heavy metals Cr, Ni, Cu, Zn, As, Cd, Hg and Pb in agricultural soils of Constanza, Jarabacoa, Rancho Arriba and San José de Ocoa (SJO), municipalities located in the valleys of the Central mountain range of the Dominican Republic. The determination of the concentrations of heavy metals was carried out using the X-ray Fluorescence technique. Just like in Azua, San Juan de la Maguana (SJM) y Barahona in the southwest. Producer municipalities of vegetables, rice, beans, corn, melon, watermelon, tomato, banana, avocado, sugar cane and fodder for cattle. The concentration of 160 mg·kg-1 Probable Effect Level (PEL) of Cr according to the SQuiRTs table (USEPA-NOAA) for agricultural soils, were exceeded in 50% of the samples in SJM, SJO, Jarabacoa and Constanza;in Barahona and Azua by 20%. The PEL of 42.8 mg·kg-1 of the Ni was higher in more than 50% of the samples from SJM, Azua, Barahona and Jarabacoa;in SJO and Constanza at 35%. In the case of Cu with a PEL of 108 mg·kg-1 in SJO and Constanza, 5% of the samples exceeded its, in the other areas the concentrations were lower. Zn, As and Pb did not manage to exceed their respective PEL.

Local Plants Potentially Suitable for Phytoremediation of Soils Polluted by Heavy Metals: The Case of Landfill Sites

Landfills are contaminated sites that need to be cleaned up to prevent human and environmental exposure to pollutants. This article aims to identify local plants capable of restoring soil polluted by heavy metals. To this end, plant species at the Bonoua landfill were inventoried. X-ray fluorescence spectrometry was used to determine the heavy metal content of soil and plants from the landfill. The bioconcentration factor (BCF) of metals in plants was evaluated. The Bonoua landfill is covered with 62 plant species, comprising 28 botanical families and 50 genera. The BCF varied from 0.08 (titanium) to 2.27 (strontium) for Phyllanthus amarus;from 0.06 (titanium) to 1.83 (copper) for Alternanthera sessilis and from 0.03 (arsenic) to 2.10 (strontium) for Amaranthus spinosus. Phyllanthus amarus, Alternanthera sessilis, and Amaranthus spinosus are strontium-accumulating species (BCF > 1). Similarly, copper BCF values were above 1 for Phyllanthus amarus, and Alternanthera sessilis. These two plant species are therefore copper accumulators. In short, Phyllanthus amarus, Alternanthera sessilis, and Amaranthus spinosus are candidate species for phytoremediation of heavy metal-polluted soils, given their BCF > 1.

Agricultural Contamination of the Surface Waters of the Upper Ouémé in Benin: The Case of Heavy Metals and Pesticides

Objective: The main objective of this study was to assess the degree of contamination of surface waters by heavy metals and pesticides. Method: To this end, data were collected in December 2022 from four specific sampling stations: Okpara, Térou, Affon and Adjiro. Levels of heavy metals, including cadmium, chromium, copper, iron, mercury, nickel and lead, were measured and subjected to in-depth statistical analysis using graphical summation models. In addition, the concentrations of pesticide active ingredients present in the samples were interpreted and evaluated. The statistical data collected during this study were processed using R software, version 3.5.0. Results: The values obtained at the different stations Okpara, Térou, Affon and Adjiro are respectively Arsenic (2 × 10-4 mg/L;2.2 × 10-1 mg/L;1.2 × 10-4 mg/L;2 × 10-4 mg/L), Cadmium (4.4 × 10-5 mg/L;1.1 × 10-2 mg/L;10-4 mg/L;4 × 10-4 mg/L). Then Copper (7 × 10-4 mg/L;3 × 10-3 mg/L;7 × 10-4 mg/L;1 × 10-4 mg/L), Iron (1.51 mg/L;6.4 × 10-1 mg/L;2.0012 mg/L;2.9 × 10-1 mg/L), Lead (0 mg/L;0 mg/L;1.5 × 10-3 mg/L;1.5 × 10-3 mg/L). Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (Cadmium, Chromium, Copper, Iron, Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (cadmium, chromium, copper, iron, mercury, nickel and lead) were all below the guideline standards set by the WHO in 2006 for uncontaminated surface waters. This indicates that the surface waters of the Upper Ouémé were below acceptable contamination thresholds in terms of heavy metals. However, the presence of pesticide active ingredients such as cyfluthrin, endosulfan-alpha, endosulfan-beta, profenosfos, tihan, atrazine, gala super and glycel clearly indicates that these surface waters are subject to agricultural contamination.

Growth of the Earthworm Millsonia omodeoi and Its Capacity to Accumulate Five Heavy Metals (HM) in Soils along a Toll Highway in Côte d’Ivoire

The roads in correlation with the traffic linked to their existences are at the origin of the emission of numerous polluting substances likely to induce disturbances of the growth and the behavioral changes in the organisms living in their vicinities. The purpose of this study is to analyze the growth and capacity accumulation of a common earthworm species (Millsonia omodeoi) in Cu, Cr, Ni, Pb and Zn in soils along a main road called “Autoroute du Nord” in C?te d’Ivoire. Thus, the earthworms were harvested in soils from a distance of 0 m (just after the sidewalk) to a distance of 200 m from the toll highway and in a control soil sampled in Lamto reserve (C?te d’Ivoire). The study was carried out in the soil laboratory at the ecological station of Lamto reserve. The Ford-Walford technique was used to determine the model and parameters most appropriated for describing the growth of earthworms. A pairwise comparison of the growth parameters was carried out using the Kruskal-Wallis test with the STATISTICA 7.1 software. The heavy metals contained in the cultivated soils and earthworms were detected and quantified using a Scanning Electron Micro-scope (MEB FEG Supra 40 VP Zeiss) and an Atomic Absorption Spectrometer SPECTRA 110 (VARIAN). The capacity accumulation of heavy metals in earthworm was determined by the bioaccumulation factor (BAF) calculation. The results of this study showed that Gompertz is the most appropriated model to describe the growth of M. omodeoi. The life cycle of M. omodeoi shows that this earthworm adopts a K type demographic strategy. Cu is the most accumulated heavy metals in M. omodeoi, when Cr is the least accumulated. Concerning heavy metal content in the earthworms, it decreases while moving away from the pavement. These results highlight a possibility of choice of M. omodeoi as 1) indicators of heavy metals pollution and 2) target of biological organisms for environmental impact studies.

Review on the application of upconversion nanomaterials in heavy metal detection

As a widespread element,heavy metals have a significant impact on human health and threaten human health.It is of great significance to develop analytical technologies that can detect heavy metal ions quickly and accurately.In comparison to conventional fluorescent materials such as organic dyes,quantum dot(QD)labels,and carbon quantum dots(CD),fluorescence detection technology utilizing lanthanide(Ln)ion-doped upconversion nanoparticles(UCNPs)stands out due to its distinctive attributes.These include a notably reduced autofluorescence background,enhanced tissue penetration capabilities,biocompatibility with cellular tissues,and minimal photodamage inflicted on biological samples.The utilization of this technology has garnered considerable attention across multiple fields.In the domain of heavy metal detection,traditional laboratory methods necessitate costly instrumentation and a fully equipped laboratory,involving intricate sample processing procedures and protracted detection periods,as well as a demand for skilled personnel.In contrast,the implementation of this material offers rapid and cost-effective detection,significantly mitigating the technical barriers for operators.Consequently,this represents an exceptional avenue to curtail expenses and broaden the scope of detection within the analytical process.This paper reviews the research progress of UCNPs in the detection of heavy metal ions,encompassing a brief elucidation of the luminescence principle of upconversion nanomaterials and commonly used detection principles.Additionally,it provides a detailed overview of the research status of several common non-metal ions and essential heavy metals.Furthermore,it summarizes the current focal points in UCNP detection and discusses the challenges and prospects associated with it.

Phytoremediation Strategies for Heavy Metal Contamination: A Review on Sustainable Approach for Environmental Restoration

Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. Heavy metal pollution is mostly produced by urbanization and industry, which threatens ecosystems and human health. Herein, we discuss a sustainable environmental restoration strategy employing phytoremediation for heavy metal pollution, the carcinogenic, mutagenic, and cytotoxic effects of heavy metals such as cadmium, copper, mercury, selenium, zinc, arsenic, chromium, lead, nickel, and silver, which may be fatal. Phytoremediation, which was prioritized, uses plants to remove, accumulate, and depollute pollutants. This eco-friendly method may safely collect, accumulate, and detoxify toxins using plants, making it popular. This study covers phytostabilization, phytodegradation, rhizodegradation, phytoextraction, phytovolatilization, and rhizofiltration. A phytoremediation process’s efficiency in varied environmental circumstances depends on these components’ complex interplay. This paper also introduces developing phytoremediation approaches including microbe-assisted, chemical-assisted, and organic or bio-char use. These advancements attempt to overcome conventional phytoremediation’s limitations, such as limited suitable plant species, location problems, and sluggish remediation. Current research includes machine learning techniques and computer modeling, biostimulation, genetic engineering, bioaugmentation, and hybrid remediation. These front-line solutions show that phytoremediation research is developing towards transdisciplinary efficiency enhancement. We acknowledge phytoremediation’s promise but also its drawbacks, such as site-specific variables, biomass buildup, and sluggish remediation, as well as ongoing research to address them. In conclusion, heavy metal pollution threatens the ecology and public health and must be reduced. Phytoremediation treats heavy metal pollution in different ways. Over time, phytoremediation systems have developed unique ways that improve efficiency. Despite difficulties like site-specificity, sluggish remediation, and biomass buildup potential, phytoremediation is still a vital tool for environmental sustainability.

Application and Development Trends of Spectral Analysis in Draft of Non-Ferrous Metal Standards in China

Spectral analysis was a method of identifying substances, determining their chemical composition and calculating their content based on their spectral characteristics. This paper mainly discussed the application of various spectroscopic techniques, mainly including atomic absorption spectrometry (AAS) inductively coupled plasma emission spectrometry (ICP-AES) X-ray fluorescence spectroscopy (XRF) atomic fluorescence spectroscopy (AFS) direct reading spectroscopy (OES) glow discharge emission spectroscopy (GD-OSE) laser-induced breakdown spectroscopy (LIBS), in the formulation of non-ferrous metal standards in China. The AAS method was the most widely used single-element microanalysis method among the non-ferrous metal standards. The ICP-AES method was good at significant advantages in the simultaneous detection of multiple elements. The XRF method was increasingly used in the determination of primary and secondary trace elements due to its simple sample preparation and high efficiency. The AFS was mostly detected by single-element trace analysis. OES GD-OES and LIBS were playing an increasingly important role in the new demand area for non-ferrous metals. This paper discussed matrix elimination, sample digestion, sample preparation, instrument categories and other aspects of some standards, and summarized the advantages of spectral analysis and traditional chemical analysis methods. The new methods of future spectroscopic technology had been illustrated in the process of developing non-ferrous metal standards.

Source apportionment of heavy metals in soils around a coal gangue heap with the APCS-MLR and PMF receptor models in Chongqing,southwest China

This study studied the characteristics and source apportionment of heavy metal pollution in the agricultural soil surrounding a gangue coal heap in Chongqing,China by using absolute principal component scores-multiple linear regression(APCSMLR)model and positive matrix factorization(PMF)model.The applicability of the models was compared in the assessment of source apportionment.The results showed that the average contents of Cd,Hg,As,Pb,Cr,Cu,Ni,and Zn in the surface soil were 0.46,0.14,9.66,31.2,127,95.6,76.0,and 158 mg/kg,respectively.Combined with the spatial distribution and correlation analyses,the results of source apportionment were consistent for both the APCSMLR and PMF models.Cd,Hg,As,and Pb were mainly affected by the gangue heap accumulation,with respective contributions of 74.6%,79.4%,69.1%,and 67.2%based on the APCS-MLR model and respective contributions of 69.7%,60.7%,57.4%,and 41.9%based on the PMF model.Ni and Zn were mainly affected by industrial and agricultural activities,while Cr and Cu were mainly affected by natural factors.The results of the source apportionment were approximately consistent between the APCS-MLR and PMF models.The combined application of the two receptor models can make the results of source apportionment more comprehensive,accurate,and reliable.