Influence of pore structure heterogeneity on channeling channels during hot water flooding in heavy oil reservoir based on CT scanning

Hot water flooding is an effective way to develop heavy oil reservoirs.However,local channeling channels may form,possibly leading to a low thermal utilization efficiency and high water cut in the reservoir.The pore structure heterogeneity is an important factor in forming these channels.This study proposes a method that mixes quartz sand with different particle sizes to prepare weakly heterogeneous and strongly heterogeneous models through which hot water flooding experiments are conducted.During the experiments,computer tomography(CT)scanning identifies the pore structure and micro remaining oil saturation distribution to analyze the influence of the pore structure heterogeneity on the channeling channels.The oil saturation reduction and average pore size are divided into three levels to quantitatively describe the relationship between the channeling channel distribution and pore structure heterogeneity.The zone where oil saturation reduction exceeds 20%is defined as a channeling channel.The scanning area is divided into 180 equally sized zones based on the CT scanning images,and threedimensional(3D)distributions of the channeling channels are developed.Four micro remaining oil distribution patterns are proposed,and the morphology characteristics of micro remaining oil inside and outside the channeling channels are analyzed.The results show that hot water flooding is more balanced in the weakly heterogeneous model,and the oil saturation decreases by more than 20%in most zones without narrow channeling channels forming.In the strongly heterogeneous model,hot water flooding is unbalanced,and three narrow channeling channels of different lengths form.In the weakly heterogeneous model,the oil saturation reduction is greater in zones with larger pores.The distribution range of the average pore size is larger in the strongly heterogeneous model.The network remaining oil inside the channeling channels is less than outside the channeling channels,and the hot water converts the network remaining oil into cluster,film,and droplet remaining oil.

Effect of CO_(2)flooding in an oil reservoir with strong bottom-water drive in the Tahe Oilfield,Tarim Basin,Northwest China

The dissolution and diffusion of CO_(2)in oil and water and its displacement mechanism were investigated by laboratory experiment and numerical simulation for Block 9 in the Tahe oilfield,a sandstone oil reservoir with strong bottom-water drive in Tarim Basin,Northwest China.Such parameters were analyzed as solubility ratio of CO_(2)in oil,gas and water,interfacial tension,in-situ oil viscosity distribution,remaining oil saturation distribution,and oil compositions.The results show that CO_(2)flooding could control water coning and increase oil production.In the early stage of the injection process,CO_(2)expanded vertically due to gravity differentiation,and extended laterally under the action of strong bottom water in the intermediate and late stages.The CO_(2)got enriched and extended at the oil-water interface,forming a high interfacial tension zone,which inhibited the coning of bottom water to some extent.A miscible region with low interfacial tension formed at the gas injection front,which reduced the in-situ oil viscosity by about 50%.The numerical simulation results show that enhanced oil recovery(EOR)is estimated at 5.72%and the oil exchange ratio of CO_(2)is 0.17 t/t.

Necessity and feasibility of improving the residual resistance factor of polymer flooding in heavy oil reservoirs

The efficiency of water flooding in heavy oil reservoirs would be improved by increasing the viscosity of the displacing phase, but the sweep efficiency is not of significance due to the low mobility of the vicious oil. On the basis of mobility control theory, increasing the residual resistance factor not only reduces the water-oil mobility ratio but also decreases the requirement for viscosity enhancement of the polymer solution. The residual resistance factor caused by hydrophobic associating polymer solution is higher than that caused by polyacrylamide solution in brine containing high concentrations of calcium and magnesium ions. The results of numerical simulations show that the polymer flooding efficiency improved by increasing the residual resistance factor is far better than that by only increasing solution viscosity. The recovery factor of heavy oil reservoirs （70 mPa·s） can be enhanced by hydrophobic associating polymer solution of high residual resistance factor （more than 3） and high effective viscosity （24 mPa·s）. Therefore, increasing the residual resistance factor of the polymer solution not only decreases the requirement for the viscosity of polymer solution injected into heavy oil reservoirs but also is favorable to enhanced oil recovery during polymer flooding.

Mechanisms of remaining oil formation by water flooding and enhanced oil recovery by reversing water injection in fractured-vuggy reservoirs

To get a deeper understanding on the formation mechanisms and distribution laws of remaining oil during water flooding, and enhanced oil recovery(EOR) mechanisms by reversing water injection after water flooding, 3D visualization models of fractured-vuggy reservoir were constructed based on the elements and configuration of fractures and vugs, and typical fracture-vug structures by using advanced CT scanning and 3D printing technologies. Then, water flooding and reversing water injection experiments were conducted. The formation mechanisms of remaining oil during water flooding include inadequate injection-production well control, gravity difference between oil and water, interference between different flow channels, isolation by low connectivity channel, weak hydrodynamic force at the far end. Under the above effects, 7 kinds of remaining oil may come about, imperfect well-control oil, blind side oil, attic oil at the reservoir top, by-pass residual oil under gravity, by-pass residual oil in secondary channel, isolated oil in low connectivity channel, and remaining oil at far and weakly connected end. Some remaining oil can be recovered by reversing water injection after water flooding, but its EOR is related to the remaining oil type, fracture-cavity structure and reversing injection-production structure. Five of the above seven kinds of remaining oil can be produced by six EOR mechanisms of reversing water injection: gravity displacement, opening new flow channel, rising the outflow point, hydrodynamic force enhancement, vertically equilibrium displacement, and synergistic effect of hydrodynamic force and gravity.

Geochemical characteristics of reservoir after water and polymer flooding in Xingshugang oilfield of Daqing

Collecting 44 oil-sand specimens of Pu-I Member in two inspection wells before and after polymer flooding in the thirteenth district of Xingshugang oilfield,with experimental analysis,the author obtained the data about oil viscosity,flow,oil saturation and oil displacement efficiency.The result shows that viscous oil predominates in the main remaining oil in Xingshugang oilfield after water flooding with a certain amount of low viscosity oil,high viscosity oil and heavy oil;after polymer flooding,the viscous oil is main ingredient.Compared with water flooding,the low mobility and poor oil can be spread by polymer flooding,expanding the affected area and improving sweep efficiency and oil recovery.The geochemical affecting factors of water flooding and oil displacement efficiency refer to reservoir flow,permeability and the viscosity of residual oil.In the reservoir with permeability from low to high,the polymer flooding efficiency is better than water flooding.It provides the basis for improving the water and polymer flooding efficiency of the Xingshugang oilfield.

Quantitative Characterization and Dynamic Law of Interlayer Interference for Multilayer Commingled Production in Heavy Oil Reservoirs by Numerical Simulation

This paper moves one step forward to build?a?numerical model to research quantitative characterization and dynamic law for interlayer interference factor (IIF) in the multilayer reservoir which was heavy oil reservoirs and produced by directional wells. There are mainly four contributions of this paper to the existing body of literature. Firstly, an equivalent simulation method of the pseudo start pressure gradient (PSPG) is developed to quantitatively predict the value of?IIF?under different geological reservoir conditions. Secondly, the interlayer interference is extended in time, and the time period of the study extends from a water cut stage to the whole process from the oil well open to produce?a?high water cut. Thirdly, besides the conventional productivity interlayer interference factor (PIIF), a new parameter, that is, the oil recovery interlayer interference factor (RIIF) is put forward.?RIIF?can be used to evaluate the technical indexes of stratified development and multilayer co-production effectively. Fourthly,?the?effectsof various geological reservoir parameters such as reservoir permeability and crude oil viscosity, etc. on the?PIIF?and?RIIF’s?type curves?are?discussed in detail and the typical plate?is?plotted. The research results provide a foundation for the effective development of multilayer heavy oil reservoirs.

CO2 assisted steam flooding in late steam flooding in heavy oil reservoirs

To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foam assisted steam flooding,and CO2 assisted steam flooding under different perforation conditions are conducted,and CO2-assisted steam flooding is proposed for reservoirs in the late stage of steam flooding.The experimental results show that after adjusting the perforation in late steam flooding,the CO2 assisted steam flooding formed a lateral expansion of the steam chamber in the middle and lower parts of the injection well and a development mode for the production of overriding gravity oil drainage in the top chamber of the production well;high temperature water,oil,and CO2 formed stable low-viscosity quasi-single-phase emulsified fluid;and CO2 acted as a thermal insulation in the steam chamber at the top,reduced the steam partial pressure inside the steam chamber,and effectively improved the heat efficiency of injected steam.Based on the three-dimensional physical experiments and the developed situation of the J6 block in Xinjiang Oilfield,the CO2 assisted steam flooding for the J6 block was designed.The application showed that the CO2 assisted steam flooding made the oil vapor ratio increase from 0.12 to 0.16 by 34.0%,the oil recovery increase from 16.1%to 21.5%,and the final oil recovery goes up to 66.5%compared to steam flooding after perforation adjustment.

Method of moderate water injection and its application in ultra-low permeability oil reservoirs of Yanchang Oilfield, NW China

To explore the method of improving development effect and solving the problem of water breakthrough and water out for ultralow permeability fractured reservoirs, an indoor evaluation method of dynamic imbibition for fracture-matrix system was established taking the Chang 8 reservoir in southern Yanchang Oilfield as a research target. Key factors for the imbibition effect were obtained, an imbibition's rate expression was obtained, a model considering the double effects of imbibition-displacement was built and optimal injection and production parameters for the research area were obtained as well. The results show that an optimum displacement rate that maximizes the oil displacement efficiency exists in the water displacing oil process, and the optimal displacing rate becomes smaller as the permeability decreases. The imbibition displacement efficiency increases as the reservoir quality index and water wettability index of rock become bigger. But the larger the initial water saturation or oil-water viscosity ratio is, the smaller the imbibition displacement efficiency is. The optimal injection-production ratio for the Chang 8 reservoir of southern Yanchang Oilfield is 0.95, and the predicted recovery is 17.2% when the water cut is 95%, it is 2.9% higher than the recovery of conventional injection-production ratio 1.2. By using the moderate water injection technique based on the double effects of imbibition-displacement mechanism, the water injection development effect for the ultra-low permeability fractured reservoirs can be improved significantly.

Experiments on the influences of well pattern on water flooding characteristics of dissolution vug-cave reservoir

Based on the similarity criterion, volcanic rock samples were taken from outcrops to make experimental models. Water flooding experiments of five-spot well pattern, nine-spot well pattern, five-spot to nine-spot well pattern, the relationship between relative well and fracture positions, and injection rate in dissolution vug-cave reservoirs with/without fractures were carried out to analyze variation regularities of development indexes, find out development characteristics of water flooding with different well patterns and sort out the optimal water flooding development mode. For dissolution vug-cave reservoirs without fractures, five-spot well pattern waterflooding has very small sweeping area, serious water channeling and low oil recovery. When the well pattern was adjusted from five-spot to nine-spot well pattern, oil recovery could be largely improved, but the corner well far from the injector is little affected. In dissolution vug-cave reservoirs with fractures, when the injector and producer are not connected by fractures, the fractures could effectively connect the poorly linked vugs to improve the development effect of water flooding. Whether there are fractures or not in dissolution vug-cave reservoirs, the development effect of nine-spot well-pattern is much better than that of five-spot well pattern and five-spot to nine-spot well pattern, this is more evident when there are fractures, and the edge well has better development indexes than corner well. At the high-water cut stage of water flooding with nine-spot well pattern, the oil recovery can be further improved with staggered line-drive pattern by converting the corner well into injection well. It is helpful to increase the oil production of corner well of nine-spot well pattern by increasing the injection rate, and improve ultimate oil recovery, but the water-free production period would be greatly shortened and water-free recovery would decrease.

Study on Remaining Oil at High Water Cut Stage of the Offshore Strong Bottom Water Reservoir

C oilfield is a heavy oil field developed by horizontal wells and single sand body in Bohai oilfield. The edge and bottom water of the reservoir is active and the natural energy development mode is adopted. The comprehensive water cut of the oilfield was 95.3%, which had entered the stage of high water cut oil production. Some reservoirs were limited by crude oil viscosity and oil column height. Under the condition of existing development well pattern, some reserves were not produced or the degree of production was low, and the degree of well control was not high, so there is room for tapping the potential of remaining oil. This paper studied the rising law of water ridge of horizontal wells in bottom water reservoir by reservoir engineering method, and guided the infilling limit of horizontal wells in bottom water reservoir. At the same time, combined with the research results of fine reservoir description, the geological model was established, the numerical simulation was carried out, and the distribution law of remaining oil was analyzed. Through this study, we could understand the law of water flooding and remaining oil in the high water cut period of bottom water heavy oil reservoir, so as to provide guidance for the development strategy of this type of reservoir in the high water cut period.

Capsule polymer flooding for enhanced oil recovery

To solve the problems of shear degradation and injection difficulties in conventional polymer flooding,the capsule polymer flooding for enhanced oil recovery(EOR)was proposed.The flow and oil displacement mechanisms of this technique were analyzed using multi-scale flow experiments and simulation technology.It is found that the capsule polymer flooding has the advantages of easy injection,shear resistance,controllable release in reservoir,and low adsorption retention,and it is highly capable of long-distance migration to enable viscosity increase in deep reservoirs.The higher degree of viscosity increase by capsule polymer,the stronger the ability to suppress viscous fingering,resulting in a more uniform polymer front and a larger swept range.The release performance of capsule polymer is mainly sensitive to temperature.Higher temperatures result in faster viscosity increase by capsule polymer solution.The salinity has little impact on the rate of viscosity increase.The capsule polymer flooding is suitable for high-water-cut reservoirs for which conventional polymer flooding techniques are less effective,offshore reservoirs by polymer flooding in largely spaced wells,and medium to low permeability reservoirs where conventional polymers cannot be injected efficiently.Capsule polymer flooding should be customized specifically,with the capsule particle size and release time to be determined depending on target reservoir conditions to achieve the best displacement effect.

Factors influencing oil recovery by surfactant-polymer flooding in conglomerate reservoirs and its quantitative calculation method

This study aims to clarify the factors influencing oil recovery of surfactant-polymer(SP)flooding and to establish a quantitative calculation model of oil recovery during different displacement stages from water flooding to SP flooding.The conglomerate reservoir of the Badaowan Formation in the seventh block of the Karamay Oilfield is selected as the research object to reveal the start-up mechanism of residual oil and determine the controlling factors of oil recovery through SP flooding experiments of natural cores and microetching models.The experimental results are used to identify four types of residual oil after water flooding in this conglomerate reservoir with a complex pore structure:oil droplets retained in pore throats by capillary forces,oil cluster trapped at the junction of pores and throats,oil film on the rock surface,isolated oil in dead-ends of flow channel.For the four types of residual oil identified,the SP solution can enhance oil recovery by enlarging the sweep volume and improving the oil displacement efficiency.First,the viscosity-increasing effect of the polymer can effectively reduce the permeability of the displacement liquid phase,change the oil-water mobility ratio,and increase the water absorption.Furthermore,the stronger the shear drag force of the SP solution,the more the crude oil in a porous medium is displaced.Second,the surfactant can change the rock wettability and reduce the absorption capacity of residual oil by lowering interfacial tension.At the same time,the emulsification further increases the viscosity of the SP solution,and the residual oil is recovered effectively under the combined effect of the above two factors.For the four start-up mechanisms of residual oil identified after water flooding,enlarging the sweep volume and improving the oil displacement efficiency are interdependent,but their contribution to enhanced oil recovery are different.The SP flooding system primarily enlarges the sweep volume by increasing viscosity of solution to start two kinds of residual oil such as oil droplet retained in pore throats and isolated oil in dead-ends of flow channel,and primarily improves the oil displacement efficiency by lowing interfacial tension of oil phase to start two kinds of residual oil such as oil cluster trapped at the junction of pores and oil film on the rock surface.On this basis,the experimental results of the oil displacement from seven natural cores show that the pore structure of the reservoir is the main factor influencing water flooding recovery,while the physical properties and original oil saturation have relatively little influence.The main factor influencing SP flooding recovery is the physical and chemical properties of the solution itself,which primarily control the interfacial tension and solution viscosity in the reservoir.The residual oil saturation after water flooding is the material basis of SP flooding,and it is the second-most dominant factor controlling oil recovery.Combined with the analysis results of the influencing factors and reservoir parameters,the water flooding recovery index and SP flooding recovery index are defined to further establish quantitative calculation models of oil recovery under different displacement modes.The average relative errors of the two models are 4.4%and 2.5%,respectively;thus,they can accurately predict the oil recovery of different displacement stages and the ultimate reservoir oil recovery.

Theories and practices of carbonate reservoirs development in China

Carbonate reservoirs in China have the characteristics of diversified accumulation pattern, complex structure and varying reservoir conditions. Concerning these characteristics, this article tracks the technical breakthroughs and related practices since the 1950 s, summarizes the developed theory and technologies of carbonate reservoir development, analyzes their adaptability and problems, and proposes their development trend. The following theory and technologies have come into being:(1) carbonate reservoir formation mechanisms and compound flow mechanisms in complex medium;(2) reservoir identification and description technologies based on geophysics and discrete fracture-vuggy modeling method;(3) well testing analysis technology and numerical simulation method of coupling free flow and porous media flow;(4) enhanced oil recovery techniques for nitrogen single well huff and puff, and water flooding development techniques with well pattern design in spatial structure, changed intensity water injection, water plugging and channel blocking as the core;(5) drilling and completion techniques, acid fracturing techniques and its production increasing techniques. To realize the efficient development of carbonate oil and gas reservoirs, researches in four aspects need to be done:(1) complex reservoir description technology with higher accuracy;(2) various enhanced oil recovery techniques;(3) improving the drilling method and acid fracturing method for ultra-deep carbonate reservoir and significantly cutting engineering cost;(4) strengthening the technological integration of information, big data, cloud computation, and artificial intelligence in oilfield development to realize the smart development of oilfield.

超稠油油藏热化学驱油水渗流特征

针对超稠油油藏热化学驱开发过程中不同温度区域内的油水渗流特征不明的问题,利用微观可视化实验和一维物理模拟实验,定量研究了不同温度下热水和驱油剂对驱油效率的影响及相对渗透率的变化规律,分析了热水和驱油剂驱油的致效机理和交互作用。实验结果表明:温度为70℃时,高温驱油剂驱的油相相对渗透率增大,水相相对渗透率变化较小;温度为150℃时,热水和驱油剂的协同增效作用更显著,热水驱转高温驱油剂驱和直接高温驱油剂驱的油相、水相相对渗透率均明显增大;温度超过200℃后,驱油剂在高温限制下驱油作用减弱,热水对驱油效率的提升大幅增加。研究表明:不同温度下,热水驱和高温驱油剂驱均可提高驱油效率;随着温度升高,热水对提高驱油效率的作用不断增大,驱油剂对驱油效率的贡献先增大后减小;热化学驱通过热水、驱油剂在不同温度区域的接替驱油和协同作用,能够实现超稠油油藏效益开发。该研究可为热化学驱提高超稠油油藏采收率提供参考。

新疆油田浅层超稠油SAGD高效低碳开发技术研究与展望

针对“双碳”目标背景下超稠油开发高能耗与油田高质量发展矛盾日益加剧的问题,新疆油田通过SAGD机理研究与现场实践,在维持蒸汽腔高效扩展,突破储层渗流屏障遮挡,提高浅薄层驱泄复合效率,实现水平井长水平段高效均衡产液等方面持续攻关,取得显著效果。采用气体辅助技术,实现蒸汽腔隔热保压增能,油汽比可提高20%;利用立体井网及储层升级扩容技术,改善Ⅲ类超稠油油藏渗流特征,泄油速度可增大20%~40%;采用全密闭生产方式,VHSD产液温度由100℃上升至150℃,采油速度提高50%;深化热采流量控制器(FCD)机理研究,完善油藏-井筒耦合优化设计方法,水平井水平段动用程度可提高20%。“十四五”期间,新疆油田将深化溶剂辅助SAGD、无水SAGD和控温水热裂解等技术研究,逐步完善浅层超稠油低碳高效开发技术系列,该研究可为稠油油藏开发提供借鉴。

稠油油藏蒸汽-空气复合火驱特征分析及参数优化

针对常规火驱存在热利用率低和高黏油启动慢的问题,以新疆红浅1井区稠油油藏为例,利用数值模拟模型对比了常规火驱和蒸汽-空气复合火驱的驱油特性和燃烧特性,通过对复合火驱各区带的温度、含油饱和度等参数进行分析,探究了蒸汽-空气复合火驱协同增效作用,并对蒸汽-空气复合火驱的注入参数进行了优化。结果表明:提产增效的主要机理是湿蒸汽吸收已燃区中滞留的热量变为过热蒸汽,并被高速流动的空气携带穿过燃烧前缘,使冷油区原油黏度大幅度降低,在提高驱油效率的同时增大了蒸汽冷凝带的宽度、燃烧波及体积和火线推进速度;注入参数的优化能提高复合火驱的开发效果,水气比越大,产能越高,而采用段塞注入会降低产能,为满足经济效益开发,最佳水气比应为3.0×10^(-3)m^(3)/m^(3)左右,最佳注汽段塞间隔应为90~120 d。该研究成果对火驱油藏提高开发效果具有借鉴意义。

低渗透油藏压驱技术现状及发展趋势

压驱技术是近年来针对低渗透油藏高效开发而提出的一种增加储层动用程度、提高原油采收率的储层改造技术。压驱技术先通过高压小排量向地层注入大量携带化学剂的液体,然后进行焖井,通过压力的扩散和化学剂与裂缝孔隙中的原油充分置换而达到增产的目的。文中结合国内外压驱技术的最新研究动态,从压驱技术现状、设计原则、设计方法、应用分析及发展趋势等方面展开论述,重点分析了压驱技术与水力压裂技术的区别、增产机理和设计方法以及现场应用效果等,同时也指出了当前压驱技术理论研究方面的欠缺,展望了该技术的发展趋势和应用前景。

表面活性剂对水驱普通稠油油藏的乳化驱油机理

为了研究乳化降黏驱油剂对不同渗透率的水驱普通稠油油藏的驱油效率和孔隙尺度增效机理,选取了烷基酚聚氧乙烯醚(J1)、α-烯基磺酸盐类表面活性剂(J2)、十二烷基羟磺基甜菜碱(J3)、J3与烷基酚聚氧乙烯醚羧酸盐复配表面活性剂(J4)作为驱油剂,开展了4种驱油剂一维驱油和微观驱油模拟实验,明确了乳化降黏驱油剂在孔隙尺度的致效机理。结果表明,降低界面张力对提高驱油效率的作用大于提高乳化降黏率。在油藏条件下,乳化降黏驱油剂需要依靠乳化降黏和降低界面张力的协同增效作用,才能大幅提高驱油效率。乳化降黏驱油剂的乳化能力越强、油水界面张力越低,驱油效率增幅越大。当化学剂乳化降黏率达到95%时,油水界面张力从10^(-1)mN/m每降低1个数量级,化学剂在高渗透和低渗透岩心中的驱油效率依次提高约10.0%和7.8%。乳化降黏驱油剂注入初期通过降低界面张力,使得高渗透岩心和低渗透岩心中的驱替压力分别为水驱注入压力的1/2和1/3,从而提高注入能力。注入后期大块的原油被乳化形成大量不同尺寸的油滴,增强原油流动性,提高驱油效率。乳化形成的界面相对稳定的稠油油滴,能暂堵岩石的喉道和大块稠油与岩石颗粒形成的通道。油滴的暂堵叠加效应,使高渗透和低渗透岩心的驱替压差分别为水驱压差的5.2倍和32.3倍,大幅提高了注入压力,从而扩大平面波及面积。降黏驱油剂驱油实现了提高驱油效率的同时扩大波及范围。研究结果为水驱稠油开发用驱油剂的研发提供参考,为大幅提高水驱普通稠油采收率奠定基础。

胜利油田稠油油藏开发技术进展

针对胜利油田不同类型稠油油藏的地质特点及开发矛盾,形成了一套较为完善的稠油油藏开发技术系列,并取得了显著的开发效果。从各项技术的理论基础和矿场应用2个方面,总结了不同类型稠油油藏开发技术进展。对于高轮次吞吐后的稠油油藏,基于非达西渗流理论,形成了井网加密技术;对于敏感性稠油油藏,形成了近热远防理论,降低了水敏对开发的不利影响;对于特超稠油油藏,通过HDCS技术的协同降黏、膨胀增能作用,解决了“注不进、采不出”的开发难题;对于低效水驱稠油油藏,通过转蒸汽驱,达到加密角井流线、水井流线逆向的目的,从而提高该类油藏的采收率;对于深层稠油油藏,以气热协同保热强热、热剂协同接替助驱、气剂协同均衡热前缘的协同增效作用机理认识为基础,形成了多元热复合驱油理论,实现了深层稠油的有效动用;对于薄层稠油油藏,通过热+水平井复合开发模式,提高了油藏的吸汽能力和动用范围;对于浅薄层超稠油油藏,通过HDNS技术增能降黏扩波及,实现了该类油藏的高效开发。胜利油田稠油油藏开发技术系列的应用,为胜利油田稠油效益开发、绿色开发提供了技术支撑。

稠油自乳化水驱开发规律

受原油性质的影响,稠油自乳化水驱开发与常规水驱开发不同,传统的稀油水驱理论不适用于稠油水驱开发。以中国某稠油自乳化水驱油藏流体参数为基础,通过室内实验和数值模拟,研究自乳化水驱开发规律,揭示自乳化水驱机理和主要影响因素。采用新的数值模拟方法揭示自乳化水驱的稳定驱替阶段为类“活塞式”驱油模式,开发全过程可分为4个阶段,即纯油阶段、过渡阶段、平台阶段和水油比快速上升阶段。渗透率级差和原油黏度是影响自乳化水驱含水率的主要因素,其次是渗透率和注水速度。