In this paper,two lifting mechanism models with opposing placements,which use the same hydraulic hoist model and have the same angle of 50°,have been developed.The mechanical and hydraulic simulation models are e...In this paper,two lifting mechanism models with opposing placements,which use the same hydraulic hoist model and have the same angle of 50°,have been developed.The mechanical and hydraulic simulation models are established using MATLAB Simscape to analyze their kinetics and dynamics in the lifting and holding stages.The simulation findings are compared to the analytical calculation results in the steady state,and both methods show good agreement.In the early lifting stage,Model 1 produces greater force and discharges goods in the container faster than Model 2.Meanwhile,Model 2 reaches a higher force and ejects goods from the container cleaner than its counterpart at the end lifting stage.The established simulation models can consider the effects of dynamic loads due to inertial moments and forces generated during the system operation.It is crucial in studying,designing,and optimizing the structure of hydraulic-mechanical systems.展开更多
In order to achieve a wheelchair lift function, this paper designs a tri-scissors mechanism. Through the so-called H-type transmission and L-type swing rod, the three scissors mechanisms lift in the same rate with onl...In order to achieve a wheelchair lift function, this paper designs a tri-scissors mechanism. Through the so-called H-type transmission and L-type swing rod, the three scissors mechanisms lift in the same rate with only one liner motor while ensuring the stability of the lift. Finite element analysis in ANSYS is performed to verify the material strength. The control system with Sunplus SCM achieves the voice control of wheelchair walking and lifting.展开更多
At present, machine fixed up and down repeatedly work is done by human. Although it is low cost and easy to change plate, there are many shortcomings of the work injury and the low work efficiency. Foreign automatic l...At present, machine fixed up and down repeatedly work is done by human. Although it is low cost and easy to change plate, there are many shortcomings of the work injury and the low work efficiency. Foreign automatic loading and unloading device has been developed, but the principle is more complex, the cost is higher, the energy consumption is larger, so the automatic loading and unloading robot came into being. Aiming at the transportation of mechanical raw material, an automatic device is designed to transport the scheduled raw materials to the specified position according to the processing requirements. The device has the characteristics of the simple operation, the rapid response and the large range of activities, and has obvious economic and environmental benefits. There is certain popularization value.展开更多
Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. ...Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. A finite element analysis （FEA） model defining more than 300 contact pairs for long nut-short screw locking mechanism of a large-scale vertical gear-rack typed ship-lift was built. Using augmented Lagrange method and symmetry algorithm of contact element stiffness, the FEA model was analyzed, and the contact stress of contact interfaces and the von Mises stress of key parts were obtained. The results show that the design of the locking mechanism meets the requirement of engineering, and this method is effective for solving large stole nonlinear contact pairs.展开更多
The kinetic model of the four-post-frame lifting mechanical system was established. The stiffness and damping matrices of differential equations of motion were obtained by using Lagrange’s equations. And the dynamic ...The kinetic model of the four-post-frame lifting mechanical system was established. The stiffness and damping matrices of differential equations of motion were obtained by using Lagrange’s equations. And the dynamic characteristics of system were analyzed by modal analysis method. Based upon this, the modifications of structural parameters which can improve dynamic performance were discussed. The low-level high-speed palletizer MDJ1200L was taken as a real case in the paper.展开更多
In order to meet the challenge of high loss rate and high tuber injury rate during the operation of the 4UZL-1 sweet potato combine harvester,the sweet potato tuber hand-over lifting mechanism was designed based on a ...In order to meet the challenge of high loss rate and high tuber injury rate during the operation of the 4UZL-1 sweet potato combine harvester,the sweet potato tuber hand-over lifting mechanism was designed based on a comprehensive analysis of the entire structure of the harvester.Taking the average normal force on conveying sweet potato tubers as evaluation indexes,the EDEM simulation experiment was carried out considering the factors of the angle of the excavating and conveying mechanism,the conveying angle of the scraper chain,the speed of the excavating and conveying mechanism,and the speed of the scraper chain conveying.The experimental findings indicated that the optimal operational performance of the hand-over lifting mechanism was achieved at a speed of 1.15 m/s for the excavating and conveying mechanism,an angle of 24°for the excavating and conveying mechanism,a conveying speed of 0.66 m/s for the scraper chain,and a conveying angle of 60°for the scraper chain.Field experiments were conducted based on the EDEM simulation experiment,using the loss rate and the injury rate of conveying sweet potato tubers as evaluation indexes.The results showed that the hand-over lifting mechanism demonstrated optimal operational effectiveness with an excavating and conveying mechanism angle of 20°,a scraper chain angle of 68°,an excavating and conveying mechanism speed of 1.2 m/s,and a scraper chain speed of 0.66 m/s,while the machine running speed was maintained at 1 m/s.At the moment,the hand-over lifting structure exhibited a loss rate of 1.12%and a tuber injury rate of 0.94%.The conclusions obtained serve as a valuable reference for future research and optimization of sweet potato combines.展开更多
基金Ho Chi Minh City University of Technology(HCMUT)Vietnam National University Ho Chi Minh City(VNU-HCM)for supporting this study。
文摘In this paper,two lifting mechanism models with opposing placements,which use the same hydraulic hoist model and have the same angle of 50°,have been developed.The mechanical and hydraulic simulation models are established using MATLAB Simscape to analyze their kinetics and dynamics in the lifting and holding stages.The simulation findings are compared to the analytical calculation results in the steady state,and both methods show good agreement.In the early lifting stage,Model 1 produces greater force and discharges goods in the container faster than Model 2.Meanwhile,Model 2 reaches a higher force and ejects goods from the container cleaner than its counterpart at the end lifting stage.The established simulation models can consider the effects of dynamic loads due to inertial moments and forces generated during the system operation.It is crucial in studying,designing,and optimizing the structure of hydraulic-mechanical systems.
基金Supported by Special Topic of the Ministry of Education about Humanities and Social Sciences(12JDGC007)ZheJiang Henglin Chair Industry Co.,Ltd.-Hefei University of Technology Green Seat and Intelligent House Innovate Team
文摘In order to achieve a wheelchair lift function, this paper designs a tri-scissors mechanism. Through the so-called H-type transmission and L-type swing rod, the three scissors mechanisms lift in the same rate with only one liner motor while ensuring the stability of the lift. Finite element analysis in ANSYS is performed to verify the material strength. The control system with Sunplus SCM achieves the voice control of wheelchair walking and lifting.
基金Supported by The National College Students’Entrepreneurship Practice Project(201510359010)Science and Technology Research Project of Anhui Province(15czz02030)
文摘At present, machine fixed up and down repeatedly work is done by human. Although it is low cost and easy to change plate, there are many shortcomings of the work injury and the low work efficiency. Foreign automatic loading and unloading device has been developed, but the principle is more complex, the cost is higher, the energy consumption is larger, so the automatic loading and unloading robot came into being. Aiming at the transportation of mechanical raw material, an automatic device is designed to transport the scheduled raw materials to the specified position according to the processing requirements. The device has the characteristics of the simple operation, the rapid response and the large range of activities, and has obvious economic and environmental benefits. There is certain popularization value.
基金Supported by the Key Research Project of StatePower Corporation (SPKJ 0l6-06)the Key Scientific ResearchProject of Hubei Province ( 2004AC101D31)
文摘Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. A finite element analysis （FEA） model defining more than 300 contact pairs for long nut-short screw locking mechanism of a large-scale vertical gear-rack typed ship-lift was built. Using augmented Lagrange method and symmetry algorithm of contact element stiffness, the FEA model was analyzed, and the contact stress of contact interfaces and the von Mises stress of key parts were obtained. The results show that the design of the locking mechanism meets the requirement of engineering, and this method is effective for solving large stole nonlinear contact pairs.
文摘The kinetic model of the four-post-frame lifting mechanical system was established. The stiffness and damping matrices of differential equations of motion were obtained by using Lagrange’s equations. And the dynamic characteristics of system were analyzed by modal analysis method. Based upon this, the modifications of structural parameters which can improve dynamic performance were discussed. The low-level high-speed palletizer MDJ1200L was taken as a real case in the paper.
基金supported by the Nanjing Agricultural Machinery Equipment Industry Intellectual Property Operation Center(04 City 2202-01)the Natural Science Foundation of Jiangsu Province(BK20201124)the earmarked fund for CARS-10-Sweetpotato,the innovation project of the Chinese Academy of Agricultural Sciences(31-NIAM-02).
文摘In order to meet the challenge of high loss rate and high tuber injury rate during the operation of the 4UZL-1 sweet potato combine harvester,the sweet potato tuber hand-over lifting mechanism was designed based on a comprehensive analysis of the entire structure of the harvester.Taking the average normal force on conveying sweet potato tubers as evaluation indexes,the EDEM simulation experiment was carried out considering the factors of the angle of the excavating and conveying mechanism,the conveying angle of the scraper chain,the speed of the excavating and conveying mechanism,and the speed of the scraper chain conveying.The experimental findings indicated that the optimal operational performance of the hand-over lifting mechanism was achieved at a speed of 1.15 m/s for the excavating and conveying mechanism,an angle of 24°for the excavating and conveying mechanism,a conveying speed of 0.66 m/s for the scraper chain,and a conveying angle of 60°for the scraper chain.Field experiments were conducted based on the EDEM simulation experiment,using the loss rate and the injury rate of conveying sweet potato tubers as evaluation indexes.The results showed that the hand-over lifting mechanism demonstrated optimal operational effectiveness with an excavating and conveying mechanism angle of 20°,a scraper chain angle of 68°,an excavating and conveying mechanism speed of 1.2 m/s,and a scraper chain speed of 0.66 m/s,while the machine running speed was maintained at 1 m/s.At the moment,the hand-over lifting structure exhibited a loss rate of 1.12%and a tuber injury rate of 0.94%.The conclusions obtained serve as a valuable reference for future research and optimization of sweet potato combines.
