Simulation study on the influence of longitudinal dynamic force on extreme-long heavy-haul trains

Purpose–The objective of this study is to investigate the impact of longitudinal forces on extreme-long heavy-haul trains,providing new insights and methods for their design and operation,thereby enhancing safety,operational efficiency and track system design.Design/methodology/approach–A longitudinal dynamics simulation model of the super long heavy haul train was established and verified by the braking test data of 30,000 t heavy-haul combination train on the long and steep down grade of Daqing Line.The simulation model was used to analyze the influence of factors on the longitudinal force of super long heavy haul train.Findings–Under normal conditions,the formation length of extreme-long heavy-haul combined train has a small effect on the maximum longitudinal coupler force under full service braking and emergency braking on the straight line.The slope difference of the long and steep down grade has a great impact on the maximum longitudinal coupler force of the extreme-long heavy-haul trains.Under the condition that the longitudinal force does not exceed the safety limit of 2,250 kN under full service braking at the speed of 60 km/h the maximum allowable slope difference of long and steep down grade for 40,000 t super long heavy-haul combined trains is 13‰,and that of 100,000 t is only 5‰.Originality/value–The results will provide important theoretical basis and practical guidance for further improving the transportation efficiency and safety of extreme-long heavy-haul trains.

Attack-Resilient Distributed Cooperative Control of Virtually Coupled High-Speed Trains via Topology Reconfiguration

Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.

Aerodynamic Features of High-Speed Maglev Trains with Different Marshaling Lengths Running on a Viaduct under Crosswinds

The safety and stability of high-speed maglev trains traveling on viaducts in crosswinds critically depend on their aerodynamic characteristics.Therefore,this paper uses an improved delayed detached eddy simulation(IDDES)method to investigate the aerodynamic features of high-speed maglev trains with different marshaling lengths under crosswinds.The effects of marshaling lengths(varying from 3-car to 8-car groups)on the train’s aerodynamic performance,surface pressure,and the flow field surrounding the train were investigated using the three-dimensional unsteady compressible Navier-Stokes(N-S)equations.The results showed that the marshaling lengths had minimal influence on the aerodynamic performance of the head and middle cars.Conversely,the marshaling lengths are negatively correlated with the time-average side force coefficient(CS)and time-average lift force coefficient(Cl)of the tail car.Compared to the tail car of the 3-car groups,the CS and Cl fell by 27.77%and 18.29%,respectively,for the tail car of the 8-car groups.It is essential to pay more attention to the operational safety of the head car,as it exhibits the highest time average CS.Additionally,the mean pressure difference between the two sides of the tail car body increased with the marshaling lengths,and the side force direction on the tail car was opposite to that of the head and middle cars.Furthermore,the turbulent kinetic energy of the wake structure on the windward side quickly decreased as marshaling lengths increased.

Robust Parameter Identification Method of Adhesion Model for Heavy Haul Trains

A robust parameter identification method based on Kiencke model was proposed to solve the problem of the parameter identification accuracy being affected by the rail environment change and noise interference for heavy-duty trains. Firstly, a Kiencke stick-creep identification model was constructed, and the parameter identification task was transformed into a quadratic programming problem. Secondly, an iterative algorithm was constructed to solve the problem, into which a time-varying forgetting factor was added to track the change of the rail environment, and to solve the uncertainty problem of the wheel-rail environment. The Granger causality test was adopted to detect the interference, and then the weights of the current data were redistributed to solve the problem of noise interference in parameter identification. Finally, simulations were carried out and the results showed that the proposed method could track the change of the track environment in time, reduce the noise interference in the identification process, and effectively identify the adhesion performance parameters.

Theory and practice for assessing structural integrity and dynamical integrity of high-speed trains

Purpose–The safety and reliability of high-speed trains rely on the structural integrity of their components and the dynamic performance of the entire vehicle system.This paper aims to define and substantiate the assessment of the structural integrity and dynamical integrity of high-speed trains in both theory and practice.The key principles and approacheswill be proposed,and their applications to high-speed trains in Chinawill be presented.Design/methodology/approach–First,the structural integrity and dynamical integrity of high-speed trains are defined,and their relationship is introduced.Then,the principles for assessing the structural integrity of structural and dynamical components are presented and practical examples of gearboxes and dampers are provided.Finally,the principles and approaches for assessing the dynamical integrity of highspeed trains are presented and a novel operational assessment method is further presented.Findings–Vehicle system dynamics is the core of the proposed framework that provides the loads and vibrations on train components and the dynamic performance of the entire vehicle system.For assessing the structural integrity of structural components,an open-loop analysis considering both normal and abnormal vehicle conditions is needed.For assessing the structural integrity of dynamical components,a closed-loop analysis involving the influence of wear and degradation on vehicle system dynamics is needed.The analysis of vehicle system dynamics should follow the principles of complete objects,conditions and indices.Numerical,experimental and operational approaches should be combined to achieve effective assessments.Originality/value–The practical applications demonstrate that assessing the structural integrity and dynamical integrity of high-speed trains can support better control of critical defects,better lifespan management of train components and better maintenance decision-making for high-speed trains.

Disturbance rejection tube model predictive levitation control of maglev trains

Magnetic levitation control technology plays a significant role in maglev trains.Designing a controller for the levitation system is challenging due to the strong nonlinearity,open-loop instability,and the need for fast response and security.In this paper,we propose a Disturbance-Observe-based Tube Model Predictive Levitation Control(DO-TMPLC)scheme combined with a feedback linearization strategy for the levitation system.The proposed strategy incorporates state constraints and control input constraints,i.e.,the air gap,the vertical velocity,and the current applied to the coil.A feedback linearization strategy is used to cancel the nonlinearity of the tracking error system.Then,a disturbance observer is implemented to actively compensate for disturbances while a TMPLC controller is employed to alleviate the remaining disturbances.Furthermore,we analyze the recursive feasibility and input-to-state stability of the closed-loop system.The simulation results indicate the efficacy of the proposed control strategy.

Monitoring energy usage of heavy-haul iron ore trains with on-board energy meter for improving energy efficiency

Purpose-For billing purposes,heavy-haul locomotives in Sweden are equipped with on-board energy meters,which can record several parameters,e.g.,used energy,regenerated energy,speed and position.Since there is a strong demand for improving energy efficiency in Sweden,data from the energy meters can be used to obtain a better understanding of the detailed energy usage of heavy-haul trains and identify potential for future improvements.Design/methodology/approach-To monitor energy efficiency,the present study,therefore,develops key performance indicators(KPIs),which can be calculated with energy meter data to reflect the energy efficiency of heavy-haul trains in operation.Energy meter data of IORE class locomotives,hauling highly uniform 30-tonne axle load trains with 68 wagons,together with additional data sources,are analysed to identify significant parameters for describing driver influence on energy usage.Findings-Results show that driver behaviour varies significantly and has the single largest influence on energy usage.Furthermore,parametric studies are performed with help of simulation to identify the influence of different operational and rolling stock conditions,e.g.,axle loads and number of wagons,on energy usage.Originality/value-Based on the parametric studies,some operational parameters which have significant impact on energy efficiency are found and then the KPIs are derived.In the end,some possible measures for improving energy performance in heavy-haul operations are given.

Guidance and evaluation system for smooth operation of heavy-haul trains

The operation rules and methods for heavy-haul trains were studied and summarized according to the characteristics of the Daqin Railway,such as a large traffic volume,a high density and high-speed and difficult-to-operate heavy-haul trains.Combined with traction calculation and operation experience,these can be quantificationally decomposed into an evaluation standard for the smooth modularized operation of heavy-haul trains that can be recognized by computers.A train operation guidance system was designed to collect locomotive drivers’operation data,display the actual operation and standard curves in real time and give voice prompts and violation-operation alarms for safety-critical operation.In addition,software for operation analysis and evaluation was developed according to the quantified smooth operation standard.The smooth operation of heavy-haul trains was evaluated and statistically analysed through a comparative analysis of the actual operation records.Moreover,a train impact force detection device capable of monitoring the three-dimensional impact force of heavy-haul trains in real time was developed.Meanwhile,the evaluation standard for smooth operation was verified and optimized by real-time monitoring of the impact force of heavy-haul trains.Finally,on the basis of the above studies,a complete closed-loop management scheme for the smooth operation of heavy-haul trains was constructed,and the objectives of optimizing train operation strategy,standardizing drivers’operations and ensuring the smooth operation of trains were realized through application.

An approach for simulating the air brake system of long freight trains based on fluid dynamics

Air brake systems are critical equipment for railway trains, which affects the running safety of the trains significantly. To study air braking characteristics of long freight trains, an approach for simulating air brake systems based on fuid dynamics theory was proposed. The structures and working mechanisms of locomotive and wagon air brakes are introduced, and mathematical models of the pipes, brake valves, reservoirs or chambers, cylinders, etc., are presented.Besides, the dynamic motions of parts in the main valve are considered. The simulation model of the whole air brake system is then formulated, and the solving method based on the finite-difference method is used. New efficient pipe boundary conditions without iterations are developed for brake pipes and branch pipes, which can achieve higher computational efficiency. The proposed approach for simulating the air brake system is validated by comparing with published measured data. Simulation results of different train formations indicate that models that consider the dynamic behavior of brake pipes are recommended for predicting the characteristics of long trains under service braking conditions.

Study on a segmented electro-pneumatic braking system for heavy-haul trains

The large longitudinal impact of heavy-haul trains is the main factor limiting their development,and the asynchronous nature of train-braking systems is the main cause of this longitudinal impact.In this paper,a segmented electro-pneumatic braking solution fully compatible with the existing freight-train braking system in China is proposed to improve the synchrony of train-braking systems.A simulation model for this braking system is developed based on air-flow theory,the 120 distribution valve and electronic control devices.The braking characteristics obtained from simulations are compared to those from the train-brake testing platform,and show high fidelity.On this basis,the effects of the new braking system on the braking capacity and longitudinal impact of a 20000 t heavy-haul train are analysed by further simulation.The results show that during service brakes,the segmented electro-pneumatic braking system can increase the braking capacity by 4.2–24.7%and reduce the coupler force by 21.6–68.0%.Therefore,it can be seen that the segmented electro-pneumatic braking system is a new type of electro-pneumatic brake that meets the needs of the Chinese railway network.It solves the problem of the longitudinal impact of heavy-haul trains satisfactorily,and its compatibility with the existing braking system(resulting in a reduced modification workload)makes it possible to maintain normal operations on heavy-haul lines while trains undergo modification.

The effect of controllable train-tail devices on the longitudinal impulse of the combined trains under initial braking

The 20,000-ton combined train running has greatly promoted China’s heavy-haul railway transportation capability. The application of controllable train-tail devices could improve the braking wave of the train and braking synchronism, and alleviate longitudinal impulse.However, the characteristics of the controllable train-tail device such as exhaust area, exhaust duration and exhaust action time are not uniform in practice, and their effects on the longitudinal impulse of the train are not apparent,which is worth studying. In this work, according to the formation of the Datong-Qinhuangdao Railway, the train air brake and longitudinal dynamics simulation system(TABLDSS) is applied to establish a 20,000-ton combined train model with the controllable train-tail device, and the braking characteristics and the longitudinal impulse of the train are calculated synchronously with changing the air exhaust time, exhaust area, and action lag time under initial braking. The results show that the maximum coupler force of the combined train will decrease with the extension of the continuous exhaust time, while the total exhaust time of the controllable train-tail device remains unchanged;the maximum coupler force of the combined train reduces by32.5% with the exhaust area increasing from 70% to 140%;when the lag time between the controllable train-tail device and the master locomotive is more than 1.5 s, the maximum coupler force of the train increases along with the time difference enlargement.

Disturbance observer-based fuzzy fault-tolerant control for high-speed trains with multiple disturbances

The fault-tolerant control problem is investigated for high-speed trains with actuator faults and multiple disturbances.Based on the novel train model resulting from the Takagi–Sugeno fuzzy theory, a sliding-mode fault-tolerant control strategy is proposed. The norm bounded disturbances which are composed of interactive forces among adjacent carriages and basis running resistances are rearranged by the fuzzy linearity technique. The modeled disturbances described as an exogenous system are compensated for by a disturbance observer. Moreover, a sliding mode surface is constructed, which can transform the stabilization problem of position and velocity into the stabilization problem of position errors and velocity errors, i.e., the tracking problem of position and velocity. Based on the parallel distributed compensation method and the disturbance observer, the fault-tolerant controller is solved. The Lyapunov theory is used to prove the stability of the closed-loop system. The feasibility and effectiveness of the proposed fault-tolerant control strategy are illustrated by simulation results.

A simplified pneumatic model for air brake of passenger trains

Braking system performance is relevant for both railway safety and network optimization. Most trains employ air brake systems;air brake systems of freight trains mostly cannot achieve a synchronous application of brake forces, which is usually customary for passenger trains. The paper generalizes a previous air brake pneumatic model to passenger trains and describes the needed modifications. Among them, the way the pressure reduces in the brake pipe is generalized. Moreover, this paper reports an analytical bi-dimensional function for calculating the nozzle diameter equivalent to the electro-pneumatic(EP) or the electronically controlled pneumatic(ECP)brake valve as a function of the wagon length and the time to vent the brake pipe locally. The numerical results of the new model are compared against several experimental tests of high-speed passenger trains of Trenitalia, namely ETR500 and ETR1000. The model is suitable to be integrated into the UIC software TrainDy, aiming to extend its computational field to passenger trains and to simulate the safety of trains during a recovery.

Maintenance Optimization for EMU Trains Considering Environmental Impacts and Correlations

The complexity of the actual operating environment of EMU trains and the interaction between the reliability of system components have become a huge challenge for the maintenance scheduling of EMU trains. In response to these problems, the evolution of reliability and failure rate under the influence of environmental factors, failure correlations and economy correlations is analyzed. We assume bogie systems form the EMU train in series. The failure correlation matrix of the bogie systems is modeled. With the lowest total maintenance cost as the optimization objective, a decision-making model for EMU train maintenance is established. A dynamic maintenance strategy is proposed for the model, which can improve maintenance plans efficiently. Artificial bee colony algorithm is applied to further iteratively optimize the threshold parameters in the strategy. The results are calculated and verified by a numerical example. The results show the effectiveness of the maintenance decision model. The dynamic maintenance strategy in this paper is compared with the traditional opportunistic maintenance strategy. The proposed maintenance strategy outperforms the traditional opportunistic maintenance strategy in the numerical example.

Vibration-based bearing fault diagnosis of high-speed trains:A literature review

Due to the advantages of comfort and safety,high-speed trains are gradually becoming the mainstream public transport in China.Since the operating speed and mileage of high-speed trains have achieved rapid growth,it is more and more urgent to ensure their reliability and safety.As an important component in the bogies of highspeed trains,the health state of the bearing directly affects the operational safety of the trains.It is therefore necessary to diagnoze the faults of bearings in the bogies of high-speed trains as early as possible.In this paper,the bearing fault diagnostic methods for high-speed trains have been systematically summarized with their challenges and perspectives.First,it briefly introduces the structure of bearings in the bogies as well as the fault characteristic frequencies.Then,a brief review of the research on vibration-based signal processing methods and machine learning methods has been provided.Finally,the challenges and future developments of vibrationbased bearing fault diagnostic methods for high-speed trains have been analyzed.

Exploration of key traction-running equipment and its problems on heavy-haul trains and research on technology development

In recent years,heavy-haul train technology has seen a number of innovations worldwide,and train traction-running technology has also made great progress,resulting in a rich pool of experience and a range of promising applications.This paper summarizes the key technologies of traction running in heavy-haul combined trains,especially locomotive and rolling-stock technology,traction technology,braking technology,control technology,communication technology and safety technology.At the same time,based on an analysis of practical applications,this paper further explores the main problems and urgent needs of traction equipment on heavy-haul trains.With an eye to the future,the heavy-haul railway system will develop in the direction of informatization,automation and intelligence,in order to build a greener,more energy-saving,safer and more efficient railway.This paper therefore looks forward to the technical developments of heavy-haul combined trains,and provides a reference for the development of heavy-haul railways.

Refined disturbance observer based prescribed performance fixed-time control of high-speed EMS trains with track irregularities

High-speed Electromagnetic Suspension(EMS)train is continuously impacted by the irregularity of the track,which worsens the levitation performance of the train.In this paper,a composite control scheme for the EMS is proposed to suppress track irregularities by integrating a Refined Disturbance Observer(RDO)and a Prescribed Performance Fixed-Time Controller(PPFTC).The RDO is designed to estimate precisely the track irregularities and lumped disturbances with uncertainties and exogenous disturbances in the suspension system,and reduce input chattering by applying to the disturbance compensation channel.PPFTC is designed to converge the suspension air gap error to equilibrium point with prescribed performance by completing error conversion,and solve the fast dynamic issue of EMS.And the boundary of overshoot and steady-state is limited in the ranged prescribed.A theoretical analysis is conducted on the stability of the proposed control method.Finally,the effectiveness and reasonability of the proposed composite anti-disturbance control scheme is verified by simulation results.

The influence of resistance exercise training prescription variables on skeletal muscle mass,strength,and physical function in healthy adults:An umbrella review

Purpose:The aim of this umbrella review was to determine the impact of resistance training(RT)and individual RT prescription variables on muscle mass,strength,and physical function in healthy adults.Methods:Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses(PRISMA)guidelines,we systematically searched and screened eligible systematic reviews reporting the effects of differing RT prescription variables on muscle mass(or its proxies),strength,and/or physical function in healthy adults aged>18 years.Results:We identified 44 systematic reviews that met our inclusion criteria.The methodological quality of these reviews was assessed using A Measurement Tool to Assess Systematic Reviews;standardized effectiveness statements were generated.We found that RT was consistently a potent stimulus for increasing skeletal muscle mass(4/4 reviews provide some or sufficient evidence),strength(4/6 reviews provided some or sufficient evidence),and physical function(1/1 review provided some evidence).RT load(6/8 reviews provided some or sufficient evidence),weekly frequency(2/4 reviews provided some or sufficient evidence),volume(3/7 reviews provided some or sufficient evidence),and exercise order(1/1 review provided some evidence)impacted RT-induced increases in muscular strength.We discovered that 2/3 reviews provided some or sufficient evidence that RT volume and contraction velocity influenced skeletal muscle mass,while 4/7 reviews provided insufficient evidence in favor of RT load impacting skeletal muscle mass.There was insufficient evidence to conclude that time of day,periodization,inter-set rest,set configuration,set end point,contraction velocity/time under tension,or exercise order(only pertaining to hypertrophy)influenced skeletal muscle adaptations.A paucity of data limited insights into the impact of RT prescription variables on physical function.Conclusion:Overall,RT increased muscle mass,strength,and physical function compared to no exercise.RT intensity(load)and weekly frequency impacted RT-induced increases in muscular strength but not muscle hypertrophy.RT volume(number of sets)influenced muscular strength and hypertrophy.

Surgical intervention combined with weight-bearing walking training promotes recovery in patients with chronic spinal cord injury:a randomized controlled study

For patients with chronic spinal cord injury,the co nventional treatment is rehabilitation and treatment of spinal cord injury complications such as urinary tract infection,pressure sores,osteoporosis,and deep vein thrombosis.Surgery is rarely perfo rmed on spinal co rd injury in the chronic phase,and few treatments have been proven effective in chronic spinal cord injury patients.Development of effective therapies fo r chronic spinal co rd injury patients is needed.We conducted a randomized controlled clinical trial in patients with chronic complete thoracic spinal co rd injury to compare intensive rehabilitation(weight-bearing walking training)alone with surgical intervention plus intensive rehabilitation.This clinical trial was registered at ClinicalTrials.gov(NCT02663310).The goal of surgical intervention was spinal cord detethering,restoration of cerebrospinal fluid flow,and elimination of residual spinal cord compression.We found that surgical intervention plus weight-bearing walking training was associated with a higher incidence of American Spinal Injury Association Impairment Scale improvement,reduced spasticity,and more rapid bowel and bladder functional recovery than weight-bearing walking training alone.Overall,the surgical procedures and intensive rehabilitation were safe.American Spinal Injury Association Impairment Scale improvement was more common in T7-T11 injuries than in T2-T6 injuries.Surgery combined with rehabilitation appears to have a role in treatment of chronic spinal cord injury patients.

Transurethral resection of bladder tumor: A systematic review of simulator-based training courses and curricula

Objective:Transurethral resection of bladder tumor is one of the most common everyday urological procedures.This kind of surgery demands a set of skills that need training and experience.In this review,we aimed to investigate the current literature to find out if simulators,phantoms,and other training models could be used as a tool for teaching urologists.Methods:A systematic review was performed according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses statement and the recommendations of the European Association of Urology guidelines for conducting systematic reviews.Fifteen out of 932 studies met our inclusion criteria and are presented in the current review.Results:The UroTrainer(Karl Storz GmbH,Tuttlingen,Germany),a virtual reality training simulator,achieved positive feedback and an excellent face and construct validity by the participants.The inspection of bladder mucosa,blood loss,tumor resection,and procedural time was improved after the training,especially for inexperienced urologists and medical students.The construct validity of UroSim®(VirtaMed,Zurich,Switzerland)was established.SIMBLA simulator(Samed GmbH,Dresden,Germany)was found to be a realistic and useful tool by experts and urologists with intermediate experience.The test objective competency model based on SIMBLA simulator could be used for evaluating urologists.The porcine model of the Asian Urological Surgery Training and Education Group also received positive feedback by the participants that tried it.The Simulation and Technology Enhanced Learning Initiative Project had an extraordinary face and content validity,and 60%of participants would like to use the simulators in the future.The 5-day multimodal training curriculum“Boot Camp”in the United Kingdom achieved an increase of the level of confidence of the participants that lasted months after the project.Conclusion:Simulators and courses or curricula based on a simulator training could be a valuable learning tool for any surgeon,and there is no doubt that they should be a part of every urologist's technical education.