The DInSAR technique is used for monitoring the desert height changes to study sandstorms. Hunshandake Sandy Land, as the test area, is one of the main sources of sandstorms in Beijing. In order to study the sandstorm...The DInSAR technique is used for monitoring the desert height changes to study sandstorms. Hunshandake Sandy Land, as the test area, is one of the main sources of sandstorms in Beijing. In order to study the sandstorm source and its impact, a pair of EnviSat ASAR images of Oct. 11, 2005, and Oct. 26, 2004, is processed on the basis of analysis of six ERS-2 and EnviSat radar images. After the image configuration, flat earth effect correction, data filtering, phase unwrapping, and geo-coding, a deformation model over Hunshandake desert is built. According to the results, the height decreased in most areas and increased in a few areas, which basically coincides with the strong sandstorm appearing in Beijing in the Spring of 2005. The results show DInSAR has an important role in monitoring of desert surface deformation.展开更多
The popular methods to estimate wave height with high-frequency（HF） radar depend on the integration over the second-order spectral region and thus may come under from even not strong external interference. To improv...The popular methods to estimate wave height with high-frequency（HF） radar depend on the integration over the second-order spectral region and thus may come under from even not strong external interference. To improve the accuracy and increase the valid detection range of the wave height measurement, particularly by the smallaperture radar, it is turned to singular peaks which often exceed the power of other frequency components. The power of three kinds of singular peaks, i.e., those around ±1,±√2 and ±1√2 times the Bragg frequency, are retrieved from a one-month-long radar data set collected by an ocean state monitoring and analyzing radar,model S（OSMAR-S）, and in situ buoy records are used to make some comparisons. The power response to a wave height is found to be described with a new model quite well, by which obvious improvement on the wave height estimation is achieved. With the buoy measurements as reference, a correlation coefficient is increased to 0.90 and a root mean square error（RMSE） is decreased to 0.35 m at the range of 7.5 km compared with the results by the second-order method. The further analysis of the fitting performance across range suggests that the peak has the best fit and maintains a good performance as far as 40 km. The correlation coefficient is 0.78 and the RMSE is 0.62 m at 40 km. These results show the effectiveness of the new empirical method, which opens a new way for the wave height estimation with the HF radar.展开更多
基金supported partially by the National Natural Science Foundation of China （Nos.40774009 and 40974016） the National Hi-tech R＆D Program of China （No. 2009AA121402）+1 种基金 the Special Project Fund of Taishan Scholars of Shandong Province China （No. TSXZ0502） the Research ＆ Innovation Team Support Program of SDUST China
文摘The DInSAR technique is used for monitoring the desert height changes to study sandstorms. Hunshandake Sandy Land, as the test area, is one of the main sources of sandstorms in Beijing. In order to study the sandstorm source and its impact, a pair of EnviSat ASAR images of Oct. 11, 2005, and Oct. 26, 2004, is processed on the basis of analysis of six ERS-2 and EnviSat radar images. After the image configuration, flat earth effect correction, data filtering, phase unwrapping, and geo-coding, a deformation model over Hunshandake desert is built. According to the results, the height decreased in most areas and increased in a few areas, which basically coincides with the strong sandstorm appearing in Beijing in the Spring of 2005. The results show DInSAR has an important role in monitoring of desert surface deformation.
基金The National Natural Science Foundation of China under contract No.61371198the National Special Program for Key Scientific Instrument and Equipment Development of China under contract No.2013YQ160793
文摘The popular methods to estimate wave height with high-frequency（HF） radar depend on the integration over the second-order spectral region and thus may come under from even not strong external interference. To improve the accuracy and increase the valid detection range of the wave height measurement, particularly by the smallaperture radar, it is turned to singular peaks which often exceed the power of other frequency components. The power of three kinds of singular peaks, i.e., those around ±1,±√2 and ±1√2 times the Bragg frequency, are retrieved from a one-month-long radar data set collected by an ocean state monitoring and analyzing radar,model S（OSMAR-S）, and in situ buoy records are used to make some comparisons. The power response to a wave height is found to be described with a new model quite well, by which obvious improvement on the wave height estimation is achieved. With the buoy measurements as reference, a correlation coefficient is increased to 0.90 and a root mean square error（RMSE） is decreased to 0.35 m at the range of 7.5 km compared with the results by the second-order method. The further analysis of the fitting performance across range suggests that the peak has the best fit and maintains a good performance as far as 40 km. The correlation coefficient is 0.78 and the RMSE is 0.62 m at 40 km. These results show the effectiveness of the new empirical method, which opens a new way for the wave height estimation with the HF radar.
