Three-dimensional simulation of long-wavelength free-electron lasers with helical wiggler and ion-channel guiding

A three-dimensional simulation of a steady-state amplifier model of a long-wavelength free-electron laser （FEL） with realizable helical wiggler and ion-channel guiding is presented. The set of coupled nonlinear differential equations for electron orbits and fields of TE 11 mode in a cylindrical waveguide are solved numerically by the Runge–Kutta algorithm with averages calculated by the Gaussian quadrature technique. Self-fields and space-charge effects are neglected, and the electron beam is assumed to be cold and slippage is ignored. The parameters correspond to the Compton regime. Evolution of the radiation power and growth rate along the wiggler is studied. Ion-channel density is chosen to obtain optimum efficiency. Simulations are preformed for the FEL operating in the neighborhood of 35 GHz and 16.5 GHz for the electron beam energies of 250 keV and 400 keV, respectively. The result of the saturated efficiency was found to be in good agreement with the simple estimation based on the phase-trapping model.

Dispersion relation and growth rate for a corrugated channel free-electron laser with a helical wiggler pump

The effects of corrugated ion channels on electron trajectories and spatial growth rate for a free-electron laser with a one-dimensional helical wiggler have been investigated. Analysis of the steady-state electron trajectories is performed by solving the equations of motion. Our results show that the presence of a corrugated channel shifts the resonance frequency to smaller values of ion channel frequency. The sixth-order dispersion equation describing the coupling between the electrostatic beam mode and the electromagnetic mode has also been derived. The dispersion relation characteristic is analyzed in detail by numerical solution. Results show that the growth rate of instability in the presence of corrugated ion channels can be greatly enhanced relative to the case of an uniform ion channel.

Electron acceleration in the inverse free electron laser with a helical wiggler by axial magnetic field and ion-channel guiding

Electron acceleration in the inverse free electron laser （IFEL） with a helical wiggler in the presence of ion-channel guiding and axial magnetic field is investigated in this article. The effects of tapering wiggler amplitude and axial magnetic field are calculated for the electron acceleration. In free electron lasers, electron beams lose energy through radiation while in IFEL electron beams gain energy from the laser. The equation of electron motion and the equation of energy exchange between a single electron and electromagnetic waves are derived and then solved numerically using the fourth order Runge-Kutta method. The tapering effects of a wiggler magnetic field on electron acceleration are investigated and the results show that the electron acceleration increases in the case of a tapered wiggler magnetic field with a proper taper constant.

Gain calculation of a free-electron laser operating with a non-uniform ion-channel guide

Amplification of an electromagnetic wave by a free electron laser （FEL） with a helical wiggler and an ion channel with a periodically varying ion density is examined. The relativistic equation of motion for a single electron in the combined wiggler and the periodic ionbchannel fields is solved and the classes of possible trajectories in this configuration are discussed. The gain equation for the FEL in the low-gain-per-pass lirnit is obtained by adding the effect of the periodic ion channel. Numerical calculation is employed to analyse the gain induced by the effects of the non-uniform ion density. The variation of gain with ion-channel density is demonstrated. It is shown that there is a gain enhancement for group I orbits in the presence of a non-uniform ion-channel but not in a uniform one. It is also shown that periodic ion-channel guiding is used to reach the maximum peak gain in a low ion-channel frequency （low ion density）.