The embedded-atom method(EAM)is used to study the behavior of helium in meta-ls.By fitting the measured parameters such as the activation energy and the heat of solution,the EAM potentials of helium in nickel are extr...The embedded-atom method(EAM)is used to study the behavior of helium in meta-ls.By fitting the measured parameters such as the activation energy and the heat of solution,the EAM potentials of helium in nickel are extracted.Based upon the EAM potentials,thebinding energy and the self-trapping of helium in nickel are investigated with molecular dynam-ics simulation.展开更多
Density and porosity are fundamental and important physical properties of rocks in various geological problems, and affect the other physical properties. Therefore, measurements of density and porosity of rock samples...Density and porosity are fundamental and important physical properties of rocks in various geological problems, and affect the other physical properties. Therefore, measurements of density and porosity of rock samples are important investigation items in both geo-science and geo-engineering areas. Several measurement techniques of the density and porosity are available and being applied currently. To ensure the data quality and to conduct its quality assessment, comparison of measurement results by different measurement techniques is necessary since the techniques are based on different principles and test procedures. In this study, we collected eight types of rock samples including a gabbro, a granite, four sandstones, a welded tuff and a mudstone as study materials, and also prepared several metal specimens for the experimental comparison. The porosities of the eight rocks covered a very wide range from 0.3% to 50% approximately. We employed three methods (caliper, buoyancy and helium-displacement pycnometer) to measure volumes of regularly-shaped specimens and to determine their bulk densities and porosities. As a result, the three techniques yielded almost same bulk densities and porosities for all the specimens. In addition, we also applied mercury intrusion porosimetry to measure density and porosity as well as to determine pore size distribution of the rock samples. Porosity values obtained by the porosimetry method were underestimated in the case of high-porosity (soft) rock samples and overestimated for the very low-porosity rock samples. Ability to determine pore size distribution, however, is a very important advantage of the porosimetry method.展开更多
To make the large-scale helium cryogenic system of fusion device EAST (experimen- tal advanced super-conducting tokamak) run stably, as the core part, the helium turbine expander must meet the requirement of refrige...To make the large-scale helium cryogenic system of fusion device EAST (experimen- tal advanced super-conducting tokamak) run stably, as the core part, the helium turbine expander must meet the requirement of refrigeration capacity. However, previous designs were based on one dimension flow to determine the average fluid parameters and geometric parameters of impeller cross-sections, so that it could not describe real physical processes in the internal flow of the tur- bine expander. Therefore, based on the inverse proposition of streamline curvature method in the context of quasi-three-dimensional flows, the all-over-controlled vortex concept was adopted to design the impeller under specified condition. The wrap angle of the impeller blade and the whole flow distribution on the meridian plane were obtained; meanwhile the performance of the designed impeller was analyzed. Thus a new design method is proposed here for the inverse proposition of the helium turbine expander impeller.展开更多
This work presents results of the different parameters which characterize the nonrelativistic Hamilton operator for the helium atoms allowing us to solve the Schrödinger equation. The total energy is decomposed i...This work presents results of the different parameters which characterize the nonrelativistic Hamilton operator for the helium atoms allowing us to solve the Schrödinger equation. The total energy is decomposed into three terms allowing to separate the kinetic energy, the electrons-nucleus interaction energy and the electron-electron interaction energy of the (2s<sup>2</sup>, 3s<sup>2</sup> and 4s<sup>2</sup>) <sup>1</sup>S<sup>e</sup>, (2p<sup>2</sup>, 3p<sup>2</sup> and 4p<sup>2</sup>) <sup>1</sup>D<sup>e</sup> and (3d<sup>2</sup> and 4d<sup>2</sup>) <sup>1</sup>G<sup>e</sup> resonance singlet states of the helium isoelectronic sequences. The states have been defined by using special forms of the Hylleraas type wave functions. The calculations have been carried out in the framework of the variational method using configuration interaction basis states with a real Hamiltonian. The agreement of the energy value of other states between the present theoretical values available in the literature is excellent. But as for the comparison of the kinetic energies, the electrons-nucleus energies interaction and the electron-electron interaction energies, we note a slight difference with the theoretical values common in literature.展开更多
基金The project supported by the National Natural Science Foundation of China
文摘The embedded-atom method(EAM)is used to study the behavior of helium in meta-ls.By fitting the measured parameters such as the activation energy and the heat of solution,the EAM potentials of helium in nickel are extracted.Based upon the EAM potentials,thebinding energy and the self-trapping of helium in nickel are investigated with molecular dynam-ics simulation.
文摘Density and porosity are fundamental and important physical properties of rocks in various geological problems, and affect the other physical properties. Therefore, measurements of density and porosity of rock samples are important investigation items in both geo-science and geo-engineering areas. Several measurement techniques of the density and porosity are available and being applied currently. To ensure the data quality and to conduct its quality assessment, comparison of measurement results by different measurement techniques is necessary since the techniques are based on different principles and test procedures. In this study, we collected eight types of rock samples including a gabbro, a granite, four sandstones, a welded tuff and a mudstone as study materials, and also prepared several metal specimens for the experimental comparison. The porosities of the eight rocks covered a very wide range from 0.3% to 50% approximately. We employed three methods (caliper, buoyancy and helium-displacement pycnometer) to measure volumes of regularly-shaped specimens and to determine their bulk densities and porosities. As a result, the three techniques yielded almost same bulk densities and porosities for all the specimens. In addition, we also applied mercury intrusion porosimetry to measure density and porosity as well as to determine pore size distribution of the rock samples. Porosity values obtained by the porosimetry method were underestimated in the case of high-porosity (soft) rock samples and overestimated for the very low-porosity rock samples. Ability to determine pore size distribution, however, is a very important advantage of the porosimetry method.
文摘To make the large-scale helium cryogenic system of fusion device EAST (experimen- tal advanced super-conducting tokamak) run stably, as the core part, the helium turbine expander must meet the requirement of refrigeration capacity. However, previous designs were based on one dimension flow to determine the average fluid parameters and geometric parameters of impeller cross-sections, so that it could not describe real physical processes in the internal flow of the tur- bine expander. Therefore, based on the inverse proposition of streamline curvature method in the context of quasi-three-dimensional flows, the all-over-controlled vortex concept was adopted to design the impeller under specified condition. The wrap angle of the impeller blade and the whole flow distribution on the meridian plane were obtained; meanwhile the performance of the designed impeller was analyzed. Thus a new design method is proposed here for the inverse proposition of the helium turbine expander impeller.
文摘This work presents results of the different parameters which characterize the nonrelativistic Hamilton operator for the helium atoms allowing us to solve the Schrödinger equation. The total energy is decomposed into three terms allowing to separate the kinetic energy, the electrons-nucleus interaction energy and the electron-electron interaction energy of the (2s<sup>2</sup>, 3s<sup>2</sup> and 4s<sup>2</sup>) <sup>1</sup>S<sup>e</sup>, (2p<sup>2</sup>, 3p<sup>2</sup> and 4p<sup>2</sup>) <sup>1</sup>D<sup>e</sup> and (3d<sup>2</sup> and 4d<sup>2</sup>) <sup>1</sup>G<sup>e</sup> resonance singlet states of the helium isoelectronic sequences. The states have been defined by using special forms of the Hylleraas type wave functions. The calculations have been carried out in the framework of the variational method using configuration interaction basis states with a real Hamiltonian. The agreement of the energy value of other states between the present theoretical values available in the literature is excellent. But as for the comparison of the kinetic energies, the electrons-nucleus energies interaction and the electron-electron interaction energies, we note a slight difference with the theoretical values common in literature.