Vanillin was used as renewable resource for preparing new monomer in two stops. The monomer has tertiary amine group which facilitates the pH change and functional aldehyde group that encourages the formation of Schif...Vanillin was used as renewable resource for preparing new monomer in two stops. The monomer has tertiary amine group which facilitates the pH change and functional aldehyde group that encourages the formation of Schiff base. It was abbreviated by DEAMVA and evaluated using chemical analysis e.g. 1H NMR, 13C NMR and FT IR all data were in logic case. Copolymerization of Styrene with 5 and 15 mol% of DEAMVA has been done by free radical polymerization and AIBN as initiator. The copolymers have been chemically and physically characterized e.g. 1H NMR, FT IR, GPC, and DSC. Post polymerization of poly (styrene-Co-DEAMVA) with 15 mol% (III b) was prepared for immobilization of tryptophan and investigated by the same methods used lately. Moreover, the sensitivity of the posted copolymer to pH has also studied by UV-vis. Spectroscopy. Scanning electron microscopy (SEM) was used to study the morphological feature of polymer surface after immobilization of tryptophan.展开更多
目的研究聚对苯二甲酸丁二醇酯(PBT)接枝不同单体[丙烯酸(AA)、丙烯酰胺(AM)、苯乙烯磺酸钠(SSS)、AA+AM、AA+SSS]对血小板黏附及功能的影响。方法采用γ射线辐照将单体[丙烯酸(AA)、丙烯酰胺(AM)、苯乙烯磺酸钠(SSS)、AA+AM、AA+SSS]...目的研究聚对苯二甲酸丁二醇酯(PBT)接枝不同单体[丙烯酸(AA)、丙烯酰胺(AM)、苯乙烯磺酸钠(SSS)、AA+AM、AA+SSS]对血小板黏附及功能的影响。方法采用γ射线辐照将单体[丙烯酸(AA)、丙烯酰胺(AM)、苯乙烯磺酸钠(SSS)、AA+AM、AA+SSS]接枝到PBT表面,依据傅里叶变换红外光谱(FTIR)和润湿时间等指标表征接枝后的PBT;利用扫描电镜(SEM)观察接枝不同单体的PBT对血小板的活化、聚集情况,同时测定通过接枝不同单体的PBT的血小板浓度、最大聚集能力、CD62p阳性表达率、血小板低渗休克率(HSR),考察其对血小板粘附及功能的影响。结果FTIR上出现了AA、AM、SSS的特征吸收峰,且接枝后的材料亲水性明显改善,表明单体接枝成功;SEM结果显示,PBT原样导致的血小板活化聚集程度明显高于改性后的PBT;滤过PBT原样的血小板与血小板原样相比:血小板浓度为(533.00±4.58 vs 672.00±3.61)×10^(9)/L,血小板最大聚集率为(48.80±0.96 vs 58.60±1.37)%,CD62p阳性表达率为(45.35±0.58 vs 39.90±0.52)%,血小板HSR为(48.74±0.46 vs 51.86±0.93)%(P<0.05)。与PBT原样相比,接枝不同单体后的PBT材料导致的血小板损失和血小板功能损伤都明显下降(P<0.05),其中PBT-(AA+AM)对血小板的综合影响最小[血小板浓度(637.00±2.65)×10^(9)/L,血小板最大聚集率(62.45±0.61)%,CD62p阳性表达率(37.39±0.42)%,血小板HSR(53.51±0.58)%]。结论表面接枝AA+AM的PBT对血小板的黏附及功能损伤的综合影响明显小于接枝其他单体的PBT,有望进一步开发用于血小板制剂中去除白细胞的过滤材料。展开更多
An increase of work function （0.3 eV） is achieved by irradiating poly（3,4-ethylenedioxythiophene）：poly（styrene sul- fonate） （PEDOT：PSS） film in vacuum with 254-nm ultraviolet （UV） light. The mechanism for ...An increase of work function （0.3 eV） is achieved by irradiating poly（3,4-ethylenedioxythiophene）：poly（styrene sul- fonate） （PEDOT：PSS） film in vacuum with 254-nm ultraviolet （UV） light. The mechanism for such an improvement is investigated by photoelectron yield spectroscopy, X-ray photo electron energy spectrum, and field emission technique. Sur- face oxidation and composition change are found as the reasons for work function increase. The UV-treated PEDOT：PSS film is used as the hole injection layer in a hole-only device. Hole injection is improved by UV-treated PEDOT：PSS film without baring the enlargement of film resistance. Our result demonstrates that UV treatment is more suitable for modifying the injection barrier than UV ozone exposure.展开更多
文摘Vanillin was used as renewable resource for preparing new monomer in two stops. The monomer has tertiary amine group which facilitates the pH change and functional aldehyde group that encourages the formation of Schiff base. It was abbreviated by DEAMVA and evaluated using chemical analysis e.g. 1H NMR, 13C NMR and FT IR all data were in logic case. Copolymerization of Styrene with 5 and 15 mol% of DEAMVA has been done by free radical polymerization and AIBN as initiator. The copolymers have been chemically and physically characterized e.g. 1H NMR, FT IR, GPC, and DSC. Post polymerization of poly (styrene-Co-DEAMVA) with 15 mol% (III b) was prepared for immobilization of tryptophan and investigated by the same methods used lately. Moreover, the sensitivity of the posted copolymer to pH has also studied by UV-vis. Spectroscopy. Scanning electron microscopy (SEM) was used to study the morphological feature of polymer surface after immobilization of tryptophan.
文摘目的研究聚对苯二甲酸丁二醇酯(PBT)接枝不同单体[丙烯酸(AA)、丙烯酰胺(AM)、苯乙烯磺酸钠(SSS)、AA+AM、AA+SSS]对血小板黏附及功能的影响。方法采用γ射线辐照将单体[丙烯酸(AA)、丙烯酰胺(AM)、苯乙烯磺酸钠(SSS)、AA+AM、AA+SSS]接枝到PBT表面,依据傅里叶变换红外光谱(FTIR)和润湿时间等指标表征接枝后的PBT;利用扫描电镜(SEM)观察接枝不同单体的PBT对血小板的活化、聚集情况,同时测定通过接枝不同单体的PBT的血小板浓度、最大聚集能力、CD62p阳性表达率、血小板低渗休克率(HSR),考察其对血小板粘附及功能的影响。结果FTIR上出现了AA、AM、SSS的特征吸收峰,且接枝后的材料亲水性明显改善,表明单体接枝成功;SEM结果显示,PBT原样导致的血小板活化聚集程度明显高于改性后的PBT;滤过PBT原样的血小板与血小板原样相比:血小板浓度为(533.00±4.58 vs 672.00±3.61)×10^(9)/L,血小板最大聚集率为(48.80±0.96 vs 58.60±1.37)%,CD62p阳性表达率为(45.35±0.58 vs 39.90±0.52)%,血小板HSR为(48.74±0.46 vs 51.86±0.93)%(P<0.05)。与PBT原样相比,接枝不同单体后的PBT材料导致的血小板损失和血小板功能损伤都明显下降(P<0.05),其中PBT-(AA+AM)对血小板的综合影响最小[血小板浓度(637.00±2.65)×10^(9)/L,血小板最大聚集率(62.45±0.61)%,CD62p阳性表达率(37.39±0.42)%,血小板HSR(53.51±0.58)%]。结论表面接枝AA+AM的PBT对血小板的黏附及功能损伤的综合影响明显小于接枝其他单体的PBT,有望进一步开发用于血小板制剂中去除白细胞的过滤材料。
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61076057,61376059,61171023,and 91221202,)the National Basic Research Program of China(Grant Nos.2012CB932701 and 2011CB933001)
文摘An increase of work function （0.3 eV） is achieved by irradiating poly（3,4-ethylenedioxythiophene）：poly（styrene sul- fonate） （PEDOT：PSS） film in vacuum with 254-nm ultraviolet （UV） light. The mechanism for such an improvement is investigated by photoelectron yield spectroscopy, X-ray photo electron energy spectrum, and field emission technique. Sur- face oxidation and composition change are found as the reasons for work function increase. The UV-treated PEDOT：PSS film is used as the hole injection layer in a hole-only device. Hole injection is improved by UV-treated PEDOT：PSS film without baring the enlargement of film resistance. Our result demonstrates that UV treatment is more suitable for modifying the injection barrier than UV ozone exposure.
