Performance Analysis of Temperature and Strain Simultaneous Measurement System Based on Heterodyne Detection of Brillouin Scattering

Microwave heterodyne detection can be used to measure the temperature and strain distribution along a fiber with high accuracy in a Brillouin optical time domain reflectometry （BOTDR） system. This method involves simultaneous measurement of Brillouin scattering and Rayleigh scattering in fiber, and scanning of Brillouin spectrum to obtain the desired information. This paper presents a simultaneous measurement system of temperature and strain based on microwave detection and analyzed the system performances such as measurement accuracy, dynamic range, and spatial resolution theoretically. The analysis shows that the system can achieve a temperature resolution of 1°C and a strain resolution of 100 μs.

Heterodyne detection enhanced by quantum correlation

Heterodyne detectors as phase-insensitive(PI) devices have found important applications in precision measurements such as space-based gravitational-wave(GW) observation.However, the output signal of a PI heterodyne detector is supposed to suffer from signal-to-noise ratio(SNR) degradation due to image band vacuum and imperfect quantum efficiency.Here, we show that the SNR degradation can be overcome when the image band vacuum is quantum correlated with the input signal.We calculate the noise figure of the detector and prove the feasibility of heterodyne detection with enhanced noise performance through quantum correlation.This work should be of great interest to ongoing space-borne GW signal searching experiments.

Experimental study of balanced optical homodyne and heterodyne detection by controlling sideband modulation

We experimentally study optical homodyne and heterodyne detections with the same setup, which is flexible to manipulate the signal sideband modulation. When the modulation only generates a single signal sideband, the light field measurement by mixing the single sideband at ω0 ±? with a strong local oscillator at the carrier frequency ω0on a beam splitter becomes balanced heterodyne detection. When two signal sidebands at ω0 ±? are generated and the relative phase of the two sidebands is locked, this measurement corresponds to optical balanced homodyne detection. With this setup, we may confirm directly that the signal-to-noise ratio with heterodyne detection is two-fold worse than that with homodyne detection. This work will have important applications in quantum state measurement and quantum information.

Simulation Analysis of Balance Detection Technique in Coherent Optical Receiver

This paper introduces the working principle of the balanced heterodyne detection system, establishes the corresponding mathematical model, deduces the signal to noise ratio (SNR) formula of the balanced heterodyne detection. By comparing balance heterodyne detection with general coherent detection with MATLAB numerical simulation, the superiority of balance heterodyne detection system is proved theoretically. Finally, the simulation models of ordinary heterodyne detection, balance detection and double balance detection system are built by OptiSystem. The simulation results are consistent with the conclusions derived from the mathematical analysis, which provides a new method for the research of weak laser detection technology.

A Novel Sensor for Detecting the Vibration

The micro-cantilever beam with a twin long period optic fiber grating sensitive to the strain and the vibration is designed to use as the sensor head.The micro-displacement of wavelength caused by strain or vibration is amplified in the system.Special cladding material is used to eliminate the interference brougth about the temperature.The designing structure is enabled to detect the micro-information.