Metal-doped(Cu,Zn)Fe2O4 from integral utilization of toxic Zn-containing electric arc furnace dust: An environment-friendly heterogeneous Fenton-like catalyst

Pure metal-doped(Cu,Zn)Fe2O4 was synthesized from Zn-containing electric arc furnace dust(EAFD)by solid-state reaction using copper salt as additive.The effects of pretreated EAFD-to-Cu2(OH)2CO3·6H2O mass ratio,calcination time,and calcination temperature on the structure and catalytic ability were systematically studied.Under the optimum conditions,the decolorization efficiency and total organic carbon(TOC)removal efficiency of the as-prepared ferrite for treating a Rhodamine B solution were approximately 90.0%and 45.0%,respectively,and the decolorization efficiency remained 83.0%after five recycles,suggesting that the as-prepared(Cu,Zn)Fe2O4 was an efficient heterogeneous Fenton-like catalyst with high stability.The high catalytic activity mainly depended on the synergistic effect of iron and copper ions occupying octahedral positions.More importantly,the toxicity characteristic leaching procedure(TCLP)analysis illustrated that the toxic Zncontaining EAFD was transformed into harmless(Cu,Zn)Fe2O4 and that the concentrations of toxic ions in the degraded solution were all lower than the national emission standard(GB/31574-2015),further confirming that the as obtained sample is an environment-friendly heterogeneous Fenton-like catalyst.

Degradation of n-butyl xanthate using fly ash as heterogeneous Fenton-like catalyst

Heterogeneous Fenton-like process using fly ash as a catalyst was studied to degrade n-butyl xanthate form aqueous solution. The different reaction parameters on the degradation efficiency of the process were investigated. The fly ash/H2O2 catalyst possesses a high oxidation activity for n-butyl xanthate degradation in aqueous solution. It is found that both the dosage of catalyst and initial solution pH significantly affect the n-butyl xanthate conversion efficient. The results indicate that by using 1.176 mmol/L H2O2 and 1.0 g/L fly ash catalyst with mass fraction of 4.14% Fe(III) oxide at pH 3.0, almost 96.90% n-butyl xanthate conversion and over 96.66% COD removal can be achieved within 120 min with heterogeneous catalysis by fly ash. CS2 as an intermediate of n-butyl xanthate oxidation. Finally, it is demonstrated that the fly ash/H2O2 catalytic oxidation process can be an efficient method for the treatment of n-butyl xanthate containing wastewater.

In situ anchor of magnetic Fe304 nanoparticles onto natural maifanite as efficient heterogeneous Fenton-like catalyst

In situ anchor of magnetic Fe304 nanoparticles （NPs） onto the surface of natural maifanite was realized by chemical oxidation coprecipitation in hot alkaline solution. The Fe304/maifanite composites were characterized by XRD, FTIR, SEM, and TEM. These results indicated that polycrystalline Fe304 NPs with inverse spinel structure were formed and tightly dispersed on maifanite surface. Based on the measurement of surface Zeta potential of maifanite at different medium pHs, the possible combination mechanism between natural maifanite and Fe304 NPs was proposed. Then, the as- obtained composites were developed as highly efficient heterogeneous Fenton-like catalyst for the discoloration of an azo dye, Methyl Orange （MO）. The comparative tests on MO discoloration in different systems revealed that Fe304/maifanite composite exhibited much higher Fenton-like catalytic activity than Fe304 NPs and the heterogeneous Fenton- like reaction governed the discoloration of MO. Kinetic results clearly showed that MO discoloration process followed the second-order kinetic model. Fe304/maifanite compo- sites exhibited the typical ferromagnetic property detected by VSM and could be easily separated from solution by an external magnetic field.

Catalytic effect in lithium metal batteries: From heterogeneous catalyst to homogenous catalyst

Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical capacity.Toward the broader implementation,the primary obstacle lies in the intricate multi-electron,multi-step redox reaction associated with sluggish conversion kinetics,subsequently giving rise to a cascade of parasitic issues.In order to smooth reaction kinetics,catalysts are widely introduced to accelerate reaction rate via modulating the energy barrier.Over past decades,a large amount of research has been devoted to the catalyst design and catalytic mechanism exploration,and thus the great progress in electrochemical performance has been realized.Therefore,it is necessary to make a comprehensive review toward key progress in catalyst design and future development pathway.In this review,the basic mechanism of lithium metal batteries is provided along with corresponding advantages and existing challenges detailly described.The main catalysts employed to accelerate cathode reaction with emphasis on their catalytic mechanism are summarized as well.Finally,the rational design and innovative direction toward efficient catalysts are suggested for future application in metal-sulfur/gas battery and beyond.This review is expected to drive and benefit future research on rational catalyst design with multi-parameter synergistic impacts on the activity and stability of next-generation metal battery,thus opening new avenue for sustainable solution to climate change,energy and environmental issues,and the potential industrial economy.

Synthesis of Magnetically Modified Fe-Al Pillared Bentonite and Heterogeneous Fenton-like Degradation of Orange II

Magnetically modified Fe-Al pillared bentonite（Fe3O4/ Fe-Al-Bent） was prepared via chemical co-precipitation method and characterized by powder X-ray diffraction（XRD）, Brunauer-EmmettTeller（BET）, Fourier transform infrared spectroscopy（FTIR） and scanning electron microscopy（SEM）. A series of experiments were carried out to investigate the degradation of Orange II by the obtained heterogeneous catalysts in the presence of H2O2. The experimental result indicated that the synthetic materials had a high catalytic activity and good reusability.

Direct oxidation of the C_(sp3)-H bonds of N-heterocyclic compounds to give the corresponding ketones using a reusable heterogeneous MnO_x-N@C catalyst

Novel reusable MnOx‐N@C catalyst has been developed for the direct oxidation of N‐heterocycles under solvent‐free conditions using TBHP as benign oxidant to give the corresponding N‐heterocyclic ketones. The catalytic system exhibited a broad substrate scope and excellent regi‐oselectivity, as well as being amenable to gram‐scale synthesis. This MnOx‐N@C catalyst also showed good reusability and was successfully recycled six times without any significant loss of activity.

A Pd-metalated porous organic polymer as a highly efficient heterogeneous catalyst for C–C couplings

An efficient catalyst system based on a Pd-metalated porous organic polymer bearing phenanthroline ligands was designed and synthesized.This catalyst was applied to various C–C bond-forming reactions,including the Suzuki,Heck and Sonogashira couplings,and afforded the corresponding products while exhibiting excellent activities and selectivities.More importantly,this catalyst can be readily recycled.These features show that such catalysts have significant potential applications in the future.

Enabling heterogeneous catalysis to achieve carbon neutrality: Directional catalytic conversion of CO_(2) into carboxylic acids

The increase in anthropogenic carbon dioxide(CO_(2))emissions has exacerbated the deterioration of the global environment,which should be controlled to achieve carbon neutrality.Central to the core goal of achieving carbon neutrality is the utilization of CO_(2) under economic and sustainable conditions.Recently,the strong need for carbon neutrality has led to a proliferation of studies on the direct conversion of CO_(2) into carboxylic acids,which can effectively alleviate CO_(2) emissions and create high-value chemicals.The purpose of this review is to present the application prospects of carboxylic acids and the basic principles of CO_(2) conversion into carboxylic acids through photo-,electric-,and thermal catalysis.Special attention is focused on the regulation strategy of the activity of abundant catalysts at the molecular level,inspiring the preparation of high-performance catalysts.In addition,theoretical calculations,advanced technologies,and numerous typical examples are introduced to elaborate on the corresponding process and influencing factors of catalytic activity.Finally,challenges and prospects are provided for the future development of this field.It is hoped that this review will contribute to a deeper understanding of the conversion of CO_(2) into carboxylic acids and inspire more innovative breakthroughs.

Synergy of heterogeneous Co/Ni dual atoms enabling selective C-O bond scission of lignin coupling with in-situ N-functionalization

Selective cleavage of Csp^(2)-OCH_(3)bond in lignin without breaking other types of C-O bonds followed by N-functionalization is fascinating for on-purpose valorization of biomass.Here,a Co/Ni-based dual-atom catalyst CoNiDA@NC prepared by in-situ evaporation and acid-etching of metal species from tailor-made metal–organic frameworks was efficient for reductive upgrading of various lignin-derived phenols to cyclohexanols(88.5%–99.9%yields),which had ca.4 times higher reaction rate than the single-atom catalyst and was superior to state-of-the-art heterogeneous catalysts.The synergistic catalysis of Co/Ni dual atoms facilitated both hydrogen dissociation and hydrogenolysis steps,and could optimize adsorption configuration of lignin-derived methoxylated phenols to further favor the Csp^(2)-OCH_(3)cleavage,as elaborated by theoretical calculations.Notably,the CoNi_(DA)@NC catalyst was highly recyclable,and exhibited excellent demethoxylation performance(77.1%yield)in real lignin monomer mixtures.Via in-situ cascade conversion processes assisted by dual-atom catalysis,various high-value N-containing chemicals,including caprolactams and cyclohexylamines,could be produced from lignin.

Fe_3O_4@UiO-66-NH_2 core–shell nanohybrid as stable heterogeneous catalyst for Knoevenagel condensation

separation is an attractive alternative to filtration or centrifugation for separating solid catalysts from a liquid phase, Here, core-shell Fe3O4@UiO-66-NH2 nanohybrids with well-defined structures were constructed by dispersing magnets in a dimethylformamide （DMF） solution con- taining two metal-organic framework （MOF） precursors, namely ZrCI4 and 2-aminobenzenetricar- boxylic acid. This method is simpler and more efficient than previously reported step-by-step method in which magnets were consecutively dispersed in DMF solutions each containing one MOF precursor, and the obtained Fe304@UiO-66-NH2 with three assembly cycles has a higher degree of crystallinity and porosiW. The core-shell Fe3O4@UiO-66-NH2 is highly active and selective in Knoevenagel condensations because of the bifunctionality of UiO-66-NH2 and better mass transfer in the nano-sized shells. It also has good recycling stability, and can be recovered magnetically and reused at least four times without significant loss of catalytic activity and framework integrity. The effects of substitution on the reactivity of benzaldehyde and of substrate size were also investigated.

Silica supported perchloric acid(HClO_4-SiO_2):A mild,reusable and highly efficient heterogeneous catalyst for the synthesis of amidoalkyl naphthols

An efficient and direct procedure has been developed for the preparation of amidoalkyl naphthols by a one-pot condensation of aryl aldehydes, 2-naphthol and urea or amides, in the presence of HClO4-SiO2 as a heterogeneous catalyst. The reactions were carried out under reflux and solvent-free conditions. The present methodology offers several advantages such as excellent yields, simple procedure, easy work-up and ecofriendly reaction condition. The catalyst is easily prepared, stable, reusable and efficient under the reaction conditions.

Deep oxidative desulfurization of gas oil based on sandwich-type polysilicotungstate supported β-cyclodextrin composite as an efficient heterogeneous catalyst

In this work,in order to obtain deep clean gas oil,a novel organic–inorganic hybrid(n-C4H9)4N)7H5Si2W18Cd4O68@β-cyclodextrin(abbreviated as TBA-Si WCd@β-CD)composite was synthesized by supporting quaternary ammonium salt of sandwich-type polysilicotungstate onβ-cyclodextrin(TBA-SiWCd@β-CD)as an efficient catalyst for oxidative desulfurization(ODS)of gas oil.The successful composition of the materials explained by the formation of host–guest inclusion complex,which confirmed through FTIR,UV–vis,XRD,SEM,and EDX characterization analyses.Experimental results revealed that the levels of sulfur content and mercaptan compounds of gas oil lowered with 97%removal efficiency.Compared with the ODS treatment of gas oil,the TBA-Si WCd@β-CD composite showed an outstanding catalytic performance for the oxidation of dibenzothiophene(DBT)in the prepared model fuel.The main factors that influence the desulfurization efficiency and the kinetic study of the ODS process were investigated.The prepared heterogeneous catalyst was found to give remarkable reusability for five runs without a discernible decrease in its activity.This study suggested the potential application of the TBA-Si WCd@β-CD catalyst for removal of hazardous sulfur compounds from gas oil fuel.

Solar-Driven Hydrogen Peroxide Production Using Polymer-Supported Carbon Dots as Heterogeneous Catalyst

Safe, sustainable, and green production of hydro gen peroxide is an exciting proposition due to the role of hydrogen peroxide as a green oxidant and energy carrier for fuel cells. The current work reports the development of carbon dot-impregnated waterborne hyperbranched polyurethane as a heterogeneous photo-catalyst for solar-driven production of hydrogen peroxide. The results reveal that the carbon dots possess a suitable band-gap of 2.98 eV,which facilitates effective splitting of both water and ethanol under solar irradiation. Inclusion of the carbon dots within the eco-friendly polymeric material ensures their catalytic activity and also provides a facile route for easy catalyst separation, especially from a solubilizing medium.The overall process was performed in accordance with the principles of green chemistry using bio-based precursorsand aqueous medium. This work highlights the potential of carbon dots as an effective photo-catalyst.

Coordination environment of active sites and their effect on catalytic performance of heterogeneous catalysts

The structural complexity of supported metal catalysts,playing significant role in a wide range of chemical technologies,have prevented us from deeply understanding their catalytic mechanisms at atomic level.A fundamental understanding of the nature of active sites and structure–performance relationship of supported metal catalysts from a comprehensive view will open up numerous new opportunities for the development of advanced catalysts to address the global challenges in energy conversion and environmental protection.This review surveys the effects of multiple factors,including the metal size,shape,support,alloy and ligand modifier,on the coordinated environment of active center and further their influence on the catalytic reactions,aiming to provide guidance for the design of industrialized heterogeneous catalysts with extraordinary performance.Subsequently,the key structure characterization techniques in determining the coordination structure of active metal sites,especially the dynamic coordination structure change under the reaction condition,are well summarized.A brief summary is finally provided together with personal perspectives on the further development in the field of heterogeneous metal catalysts.

Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalyst and Optimal Synthesis Conditions of the Support Prepared by Sol-gel Method

The support of catalyst for the direct synthesis of diphenyl carbonate （DPC） by heterogeneous catalytic reaction was prepared by the sol-gel method. Compared with activated charcoal, molecular sieve, porous ceramics, hopcalite, the support prepared by the sol-gel method has higher activity. The characterization of the support by X-ray diffraction （XRD） and transmission electron microscope （TEM） show that the mare crystal phase is Co2MnO4 and the average particle diameter is about 40 nm. The optimum conditions for synthesis of the support were determined by orthogonal experiments, which indicate that the proportion of Cu, Mn, and Co is the first important factor influencing the yield and selectivity of DPC. Temperature of calcination is the second one. The optimum conditions are： molar proportion of Cu, Mn, and Co being 1 ： 1 ： 1, temperature of calcination 700℃, drying at 100~C, temperature of water bath 85~C. The yield and selectivity of DPC in the process can reach 38% and 99% in the batch operation, respectively. The copper cobalt manganese mixed oxides chosen as the support contribute more to the high catalytic activity than the sol-gel method.

Amine formylation with CO2 and H2 catalyzed by heterogeneous Pd/PAL catalyst

For the first time, Pd supported on natural palygorskite was developed for amine formylation with CO2 and H2. Both secondary and primary amines with diverse structures could be converted into the desired formamides at < 100 °C, and good to excellent yields were obtained.

Covalent organic frameworks as heterogeneous catalysts

Covalent organic frameworks （COFs）, established as an emerging class of crystalline porous polymers with high surface area, structural diversity, and esignability, attract much interest and exhibit potential applications in catalysis. In this review, we summarize the use of COFs as a versatile platform to develop heterogeneous catalysts for a variety of chemical reactions. Catalytic COFs are categorized in accordance with the types of active sites, involving single functional active sites, bifunctional active sites, and metal nanoparticles （NPs） embedded in pores. Special emphasis is placed on the deliberate or incidental synthesis strategies, the stability, the heterogeneity, and the shape/size selectivity for COF catalysis. Moreover, a description of the application of COFs as photocatalysts and electrocatalysts is presented. Finally, the prospects of COFs in catalysis and remaining issues in this field are indicated.

Heterogeneous UV／Fenton catalytic degradation of wastewater containing phenol with Fe－Cu－Mn－Y catalyst

The heterogeneous UV/Fenton process with the appropriate amount of Fe-Mn-Cu-Y as catalyst was developed and various operation conditions for the degradation of phenol were evaluated. The results indicated that by using the het-erogeneous UV/Fenton process, the CODcr removal rate reached almost 100% for wastewater containing phenol. Compared with the homogeneous process, the developed catalyst could be used at wider pH range in the UV/Fenton process. Com-parison of various heterogeneous process showed that heterogeneous UV/Fenton process was best. The heterogeneous UV/Fenton process with Fe-Mn-Cu-Y catalyst is highly efficient in degrading various organic pollutants.

Augmenting Intrinsic Fenton-Like Activities of MOF-Derived Catalysts via N-Molecule-Assisted Self-catalyzed Carbonization

To overcome the ever-growing organic pollutions in the water system,abundant efforts have been dedicated to fabricating efficient Fenton-like carbon catalysts.However,the rational design of carbon catalysts with high intrinsic activity remains a long-term goal.Herein,we report a new N-molecule-assisted self-catalytic carbonization process in augmenting the intrinsic Fenton-like activity of metal-organic-framework-derived carbon hybrids.During carbonization,the N-molecules provide alkane/ammonia gases and the formed iron nanocrystals act as the in situ catalysts,which result in the elaborated formation of carbon nanotubes(in situ chemical vapor deposition from alkane/iron catalysts)and micro-/meso-porous structures(ammonia gas etching).The obtained catalysts exhibited with abundant Fe/Fe-Nx/pyridinic-N active species,micro-/meso-porous structures,and conductive carbon nanotubes.Consequently,the catalysts exhibit high efficiency toward the degradation of different organic pollutions,such as bisphenol A,methylene blue,and tetracycline.This study not only creates a new pathway for achieving highly active Fenton-like carbon catalysts but also takes a step toward the customized production of advanced carbon hybrids for diverse energy and environmental applications.

Salen-Cu(Ⅱ)@MIL-101(Cr)as an efficient heterogeneous catalyst for cycloaddition of CO2 to epoxides under mild conditions

A double active center system, namely Salen-Cu（Ⅱ）@MIL-101（Cr）, was successfully synthesized via the"ship in a bottle" approach, which acted as a bifunctional material for both capture and conversion of COin a single process. For the first time, Salen-Cu（Ⅱ）@MIL-101（Cr） catalyst was developed for the synthesis of propylene carbonate from COand propylene oxide under room temperature and ambient pressure with a yield of 87.8% over 60 h. Furthermore, the reaction mechanism was also discussed.