Study on Welding-Bead Bonding Strength of Laser-Stacking Copper-Aluminum Heterogeneous Electrode Plates

In this paper,two types of copper-aluminum heterogeneous electrode plates are stacked and the finite element analysis(FEA)models of two different laser welding conditions are built by using SYSWELD welding simulation software to calculate the depth of the welding bead and the temperature distribution of the welding surface.Then,the residual stress analysis data of the welded area are exported and the residual stress is applied to the welded specimen for CAE analysis to ensure that the welding bonding strength meets the design target of a shear force of 500 N or higher.The copper-aluminum laser-stacking simulation technique in this paper can be applied to the manufacturing of copper-aluminum heterogeneous laser-welded electrodes and series-connected electrodes of automotive lithium-ion power battery modules,providing an effective analysis method for welding bonding-strength.

Numerical simulation of influences of the earth medium's lateral heterogeneity on co- and post-seismic deformation

Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method are adopted to quantify the effects of lateral heterogeneity caused by material parameters and fault dip angle on the co- and postseismic deformation in the near- and far-field. Our results show that： 1） the medium＇s lateral heterogeneity does affect the co-seismic deformation, with the effects increasing with the medium＇s lateral heterogeneity caused by material parameters; 2） the Lame parameters play a more dominant role than density in the effects caused by lateral heterogeneity; 3） when a fault＇s dip angle is smaller than 90, the effects of the medium＇s lateral heterogeneity on the hanging wall are greater than on the footwall; 4） the impact of lateral heterogeneity caused by the viscosity coefficient on the post-seismic deformation can affect a large area, including the near- and far-field.

Evaluation of Atmosphere–Land Interactions in an LES from the Perspective of Heterogeneity Propagation

Atmosphere–land interactions simulated by an LES model are evaluated from the perspective of heterogeneity propagation by comparison with airborne measurements. It is found that the footprints of surface heterogeneity, though as 2D patterns can be dissipated quickly due to turbulent mixing, as 1D projections can persist and propagate to the top of the atmospheric boundary layer. Direct comparison and length scale analysis show that the simulated heterogeneity patterns are comparable to the observation. The results highlight the model＇s capability in simulating the complex effects of surface heterogeneity on atmosphere–land interactions.

Numerical study on static and dynamic fracture evolution around rock cavities

In this paper,a numerical code,RFPA2D（rock failure process analysis）,was used to simulate the initiation and propagation of fractures around a pre-existing single cavity and multiple cavities in brittle rocks.Both static and dynamic loads were applied to the rock specimens to investigate the mechanism of fracture evolution around the cavities for different lateral pressure coefficients.In addition,characteristics of acoustic emission（AE） associated with fracture evolution were simulated.Finally,the evolution and interaction of fractures between multiple cavities were investigated with consideration of stress redistribution and transference in compressive and tensile stress fields.The numerically simulated results reproduced primary tensile,remote,and shear crack fractures,which are in agreement with the experimental results.Moreover,numerical results suggested that both compressive and tensile waves could influence the propagation of tensile cracks;in particular,the reflected tensile wave accelerated the propagation of tensile cracks.