期刊文献+
共找到163篇文章
< 1 2 9 >
每页显示 20 50 100
Future Changes in Extreme High Temperature over China at 1.5℃-5℃ Global Warming Based on CMIP6 Simulations 被引量:13
1
作者 Guwei ZHANG Gang ZENG +1 位作者 Xiaoye YANG Zhihong JIANG 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2021年第2期253-267,共15页
Extreme high temperature(EHT)events are among the most impact-related consequences related to climate change,especially for China,a nation with a large population that is vulnerable to the climate warming.Based on the... Extreme high temperature(EHT)events are among the most impact-related consequences related to climate change,especially for China,a nation with a large population that is vulnerable to the climate warming.Based on the latest Coupled Model Intercomparison Project Phase 6(CMIP6),this study assesses future EHT changes across China at five specific global warming thresholds(1.5℃-5℃).The results indicate that global mean temperature will increase by 1.5℃/2℃ before 2030/2050 relative to pre-industrial levels(1861-1900)under three future scenarios(SSP1-2.6,SSP2-4.5,and SSP5-8.5),and warming will occur faster under SSP5-8.5 compared to SSP1-2.6 and SSP2-4.5.Under SSP5-8.5,global warming will eventually exceed 5℃ by 2100,while under SSP1-2.6,it will stabilize around 2℃ after 2050.In China,most of the areas where warming exceeds global average levels will be located in Tibet and northern China(Northwest China,North China and Northeast China),covering 50%-70%of the country.Furthermore,about 0.19-0.44 billion people(accounting for 16%-41%of the national population)will experience warming above the global average.Compared to present-day(1995-2014),the warmest day(TXx)will increase most notably in northern China,while the number of warm days(TX90p)and warm spell duration indicator(WSDI)will increase most profoundly in southern China.For example,relative to the present-day,TXx will increase by 1℃-5℃ in northern China,and TX90p(WSDI)will increase by 25-150(10-80)days in southern China at 1.5℃-5℃ global warming.Compared to 2℃-5℃,limiting global warming to 1.5℃ will help avoid about 36%-87%of the EHT increases in China. 展开更多
关键词 extreme high temperature China CMIP6 1.5℃-5℃global warming
下载PDF
Simulation Analysis and Verifcation of Temperature and Stress of Wheel-Mounted Brake Disc of a High-Speed Train 被引量:2
2
作者 Junsheng Qu Wenjing Wang +1 位作者 Ziyu Dong Wei Shan 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2022年第4期331-339,共9页
During the braking process,a large amount of heat energy is generated at the friction surfaces between the brake disc and pads and rapidly dissipates into the disc volume.In this paper,a three-dimensional thermo-mecha... During the braking process,a large amount of heat energy is generated at the friction surfaces between the brake disc and pads and rapidly dissipates into the disc volume.In this paper,a three-dimensional thermo-mechanical coupling model of high-speed wheel-mounted brake discs containing bolted joints and contact relationships is established.The direct coupling method is used to analyze the temperature and stress of the brake discs during an emergency braking event with an initial speed of 300 km/h.A full-scale bench test is also conducted to monitor the temperatures of the friction ring and bolted joints.The simulation result shows that the surface temperature of the friction ring reaches its peak value of 414°C after 102 s of braking,which agrees well with the bench test result.The maximum alternating thermal stress occurs in the bolt hole where the maximum circumferential compressive stress is−658 MPa and the maximum circumferential tensile stress is 134 MPa.During the braking process,the out-of-plane deformation of the middle part of the friction ring is larger than that of the edge,which increases the axial tensile load of the connecting bolt.This work provides support for the design of brake discs and connecting bolts. 展开更多
关键词 high speed train Wheel-mounted brake disc temperature feld Stress feld Thermo-mechanical coupling model bolt
下载PDF
Plastic Flow Modeling of Ti-5 Al-2 Sn-2 Zr-4 Mo-4 Cr Alloy at Elevated Temperatures and High Strain Rates 被引量:1
3
作者 王宝林 AI Xing +1 位作者 刘战强 LIU Jigang 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2015年第3期611-616,共6页
The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr(TC17) alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compr... The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr(TC17) alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compression tests were carried out with Instron 8874 test machine, while dynamic compression tests were performed with the split Hopkinson pressure bar (SHPB) which was installed with heating device and synchro- assembly system. The dynamic mechanical behaviors tests of TC17 were carded out from room temperature to 800 ℃ at intervals of 200 ℃ and at high sWain rates (5 500-1 9200 s-l). The stress-strain curves considering temperature-sWain rate coupling actions were obtained. The Johnson-Cook constitutive model was developed through data fitting of the stress-sWain curves. The material constants in the developed constitutive model can be determined using isothermal and adiabatic stress-strain curves at different strain rates. The Johnson-Cook constitutive model provided satisfied prediction of the plastic flow stress for TC17 alloy. 展开更多
关键词 Ti-5A1-2Sn-2Zr-4Mo-4Cr SHPB stress-strain curve high temperature high strain rate dynamic constitutive relationship
下载PDF
TMSR-LF1停堆系统高温螺栓连接结构应力松弛分析与结构安全评定 被引量:1
4
作者 林作康 王雯 +3 位作者 樊辉青 蔡茂源 翟利芳 张小春 《核技术》 CAS CSCD 北大核心 2019年第10期70-76,共7页
钍基熔盐液态堆(Thorium Molten Salt Reactor-Liquid Fuel 1,TMSR-LF1)停堆系统螺栓连接结构服役环境约在650°C的高温区域,连接结构包括三种材质的构件;升温过程热膨胀以及高温下寿期内的蠕变效应,对螺栓的预紧力都有很大影响。... 钍基熔盐液态堆(Thorium Molten Salt Reactor-Liquid Fuel 1,TMSR-LF1)停堆系统螺栓连接结构服役环境约在650°C的高温区域,连接结构包括三种材质的构件;升温过程热膨胀以及高温下寿期内的蠕变效应,对螺栓的预紧力都有很大影响。本文采用ANSYS程序,对TMSR-LF1停堆系统高温螺栓连接结构,在预紧载荷及热膨胀组合作用下的结构进行了应力分析和寿期内蠕变应力松弛分析。考虑从常温升高至工作温度的过程中,连接结构件由于使用不同材料,其热膨胀差导致预紧力发生变化的过程;着重研究分析运行寿期内螺栓结构材料的高温蠕变,所引起应力松弛的变化规律,及其对螺栓连接结构预紧力的影响;并根据ASME-III-5-HBB规范对螺栓进行力学分析和应力评定,论证该螺栓连接件全寿期内结构安全可靠。 展开更多
关键词 高温蠕变 应力松弛 螺栓预紧力 力学分析
下载PDF
温度对多钉连接CCF300/GW-300层合板拉伸性能的影响 被引量:3
5
作者 范景峰 程小全 +1 位作者 王松伟 胡仁伟 《高科技纤维与应用》 CAS 2014年第6期54-57,66,共5页
对国产CCF300/GW-300复合材料层合板与铝合金板4钉连接结构在常温及150和250℃环境下的拉伸性能进行试验研究,分析了不同温度下试件的破坏行为,并对比不同温度下连接试件的条件挤压强度和最大挤压强度,分析了温度对于结构连接性能的影... 对国产CCF300/GW-300复合材料层合板与铝合金板4钉连接结构在常温及150和250℃环境下的拉伸性能进行试验研究,分析了不同温度下试件的破坏行为,并对比不同温度下连接试件的条件挤压强度和最大挤压强度,分析了温度对于结构连接性能的影响。研究结果表明,150℃时条件挤压强度较常温有所增大,250℃时试件条件挤压强度和常温的接近;常温下试件发生紧固件的拉伸破坏,高温下主要发生层合板的挤压破坏,螺栓产生明显塑性变形。 展开更多
关键词 碳纤维复合材料 层合板 多钉连接 高温环境 拉伸性能 试验研究
下载PDF
基于Dahl模型的WJ-8型常阻力扣件纵向阻力特性拟合研究 被引量:2
6
作者 黄志斌 曾志平 +3 位作者 李桩 饶惠明 肖燕财 叶梦旋 《中南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2023年第10期4163-4170,共8页
为研究WJ-8型常阻力扣件在不同环境下的服役性能,以紧固扭矩和环境温度为试验变量,进行了3组平行试验,获得3组扣件在不同温度和扭矩工况下的纵向阻力-位移曲线,揭示宽温域范围内扣件系统纵向阻力特性的演化规律。研究结果表明:在同一工... 为研究WJ-8型常阻力扣件在不同环境下的服役性能,以紧固扭矩和环境温度为试验变量,进行了3组平行试验,获得3组扣件在不同温度和扭矩工况下的纵向阻力-位移曲线,揭示宽温域范围内扣件系统纵向阻力特性的演化规律。研究结果表明:在同一工况下,3组平行试验扣件的原始曲线形态基本一致,均可采用统一形式的幂指型函数较好地拟合;随着温度上升,不同扭矩下的扣件纵向滑移阻力总体上呈先增大后减小再增大的变化趋势,扣件纵向滑移阻力最大值和最小值分别出现在-10℃和40℃附近,前者约为后者的2倍,可见温度变化对WJ-8型常阻力扣件的纵向滑移阻力的影响不容忽视;不同温度下的扣件纵向滑移阻力基本上随扭矩增大而呈线性增大;在负温度环境下,纵向滑移阻力对扭矩变化的敏感程度要明显比正温度环境下的高;为满足纵向滑移阻力不小于9 kN的使用需求,在服役温度为30~45℃时,紧固扭矩不宜小于155 N·m。研究成果可为高速铁路无砟轨道铺轨作业提供参考,对于预测高速铁路基础结构服役性能、健全高速铁路运营安全保障体系也具有参考价值。 展开更多
关键词 高速铁路 无砟轨道 WJ-8型常阻力扣件 扭矩 温度 滑移阻力
下载PDF
Characteristics and accumulation mechanisms of the Dongfang 13-1 high temperature and overpressured gas field in the Yinggehai Basin, the South China Sea 被引量:12
7
作者 XIE YuHong HUANG BaoJia 《Science China Earth Sciences》 SCIE EI CAS 2014年第11期2799-2807,共9页
The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa (pressure coefficient=l.91) ... The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa (pressure coefficient=l.91) and the temperature is as high as 143°C (geothermal gradient 4.36°C/100 m), indicating that it is a typical high-temperature and overpressured gas reservoir. The natural gas is interpreted to be coal-type gas derived from the Miocene mature source rocks containing type Ⅱ2-Ⅲ kero- gens as evidenced by high dryness index of up to 0.98 and heavy carbon isotopes, i.e., the δ13C2 ranging from -30.76%o to -37.52%o and δ13C2 ranging from -25.02%o to -25.62%o. The high temperature and overpressured Miocene petroleum system is related mainly to diapir in the Yinggehai Basin and contains more pore water in the overpressured reservoirs due to under- compaction process. The experimental and calculated results show that the solubility of natural gas in formation water is as high as 10.5 m3/m3 under the temperature and pressure conditions of the Sanya Formation, indicating that at least part of the gas may migrate in the form of water-soluble phase. Meanwhile, the abundant gas source in the Basin makes it possible for the rapid saturation of natural gas in formation water and exsolution of soluble gas. Therefore, the main elements controlling formation of the Dongfang 13-1 gas pool include that (1) the diapir activities and accompanying changes in temperature and pressure accelerate the water-soluble gas exsolution and release a lot of free gas; (2) submarine fan fine sandstone in the Huangliu Formation provides good gas-water segregation and accumulation space; and (3) the overlying overpressured mud rocks act as effective caps. The accumulation mechanism reveals that the high temperatural and high pressure structure belt near the diapir structures has a good potential for large and medium-sized gas field exploration. 展开更多
关键词 Dongfang 13-1 high temperature and overpressured gas field accumulation mechanism diapiric belt Yinggehai Basin
原文传递
《火力发电厂高温紧固件技术导则》(DL439-91)中2个问题的探讨 被引量:1
8
作者 段辉建 《河北电力技术》 2000年第6期25-26,共2页
《火力发电厂高温紧固件技术导则》(DL439- 91)于1992年 5月实施 ,对发电厂高温紧固件的设计、制造、安装、检修、运行和检验均做了详细的规定。但笔者在执行过程中发现该导则存在一些问题 ,严重影响着高温螺栓监督工作的正常进行 ,因... 《火力发电厂高温紧固件技术导则》(DL439- 91)于1992年 5月实施 ,对发电厂高温紧固件的设计、制造、安装、检修、运行和检验均做了详细的规定。但笔者在执行过程中发现该导则存在一些问题 ,严重影响着高温螺栓监督工作的正常进行 ,因此对发现的问题进行了分析和探讨。 展开更多
关键词 火力发电厂 高温紧固件 DL439-91 螺栓
下载PDF
Preparation of Y_(1-x)Ho_xBa_2Cu_3O_(7-δ) Superconductive Thin Films
9
作者 彭正顺 杨秉川 +3 位作者 王小平 石东奇 华志强 赵忠贤 《Rare Metals》 SCIE EI CAS CSCD 1995年第2期106-109,共4页
Y_(1-x)Ho_xBa_2Cu_3O_(7-δ)(0<x<1) sinsle crystal thin films oriented with the caxis perpendicular to the sur-face were grown by DC magnetron sputtering technique. Target was pieced together with half of YBa_2Cu... Y_(1-x)Ho_xBa_2Cu_3O_(7-δ)(0<x<1) sinsle crystal thin films oriented with the caxis perpendicular to the sur-face were grown by DC magnetron sputtering technique. Target was pieced together with half of YBa_2Cu_3O_(7-δ)(YBCO) and half of HoBa_2Cu_3O_(7-δ)(HBCO) superconducting materials. As the distance between HBCO targetmaterial and substrate is varied , the Ho content in material is changed respectively. When the content of Ho is0. 7 (atom ratio) , the T_c>83K. 展开更多
关键词 e : Y_(1-x)Ho_xBa_2Cu_3O_(7-δ) SUPERCONDUCTOR Thin film DC magnetronsputtering high critical temperature
下载PDF
汽轮机中压联合汽阀螺栓疲劳-蠕变交互作用剩余寿命评估
10
作者 张艳飞 谢宝奎 管伟康 《宁夏电力》 2022年第2期55-60,70,共7页
针对汽轮机高温紧固螺栓的蠕变、疲劳及蠕变-疲劳交互作用三种失效模式,以某典型中压联合汽阀螺栓为例对影响螺栓蠕变寿命、疲劳寿命以及蠕变与疲劳交互作用时的寿命的因素进行了计算、分析。分析表明:中压联合汽阀螺栓的预紧应力对螺... 针对汽轮机高温紧固螺栓的蠕变、疲劳及蠕变-疲劳交互作用三种失效模式,以某典型中压联合汽阀螺栓为例对影响螺栓蠕变寿命、疲劳寿命以及蠕变与疲劳交互作用时的寿命的因素进行了计算、分析。分析表明:中压联合汽阀螺栓的预紧应力对螺栓的蠕变损伤量有较大的影响,预紧应力增加则所产生的蠕变损伤量增加;调峰运行方式下,疲劳寿命随着螺栓热应力的增加而降低增加。螺栓的螺纹固定端第1圈螺纹应力集中对蠕变寿命和疲劳寿命有较大影响。中压联合汽阀螺栓剩余寿命可安全运行6个检修周期,不能满足机组设计寿命的要求,需要采取降低参数运行、缩短检验周期或者在6个检修周期后更换中压联合汽阀螺栓的措施。 展开更多
关键词 高温螺栓 蠕变寿命 疲劳寿命 寿命评估
下载PDF
高温螺栓用钢1Cr-1/5Mo的研制
11
作者 祁文波 富志强 《大型铸锻件》 2006年第4期15-16,共2页
对1Cr-1/5Mo钢进行了试验研究,结果表明,通过调整材料的化学成分和热处理参数,可以生产出满足各项力学性能指标和技术要求的高温螺栓。
关键词 1Cr-1/5Mo钢 热处理 高温螺栓 性能指标
下载PDF
R26高温合金螺栓断裂原因
12
作者 孙雄 杨超 石仁强 《理化检验(物理分册)》 CAS 2024年第9期61-64,共4页
某机组汽轮机高压导气管法兰固定用R26高温合金螺栓发生断裂现象。采用宏观观察、化学成分分析、金相检验、力学性能测试、扫描电镜及能谱分析等方法对螺栓断裂的原因进行分析。结果表明:螺栓原材料中Ti元素含量偏高,使材料中产生点状... 某机组汽轮机高压导气管法兰固定用R26高温合金螺栓发生断裂现象。采用宏观观察、化学成分分析、金相检验、力学性能测试、扫描电镜及能谱分析等方法对螺栓断裂的原因进行分析。结果表明:螺栓原材料中Ti元素含量偏高,使材料中产生点状夹杂析出物,经热轧加工后,形成了带状组织,造成了螺栓的高温性能下降、硬度变大,螺栓长期在高温环境下服役,最终发生了脆性断裂。 展开更多
关键词 R26高温合金螺栓 带状组织 脆性断裂 硬度 析出相
下载PDF
高温碱水巷道锚杆腐蚀机理与热浸锌防腐围岩控制技术研究
13
作者 陈勇 范钢伟 +3 位作者 武振 殷聪 刘光旭 敦思勤 《中国煤炭》 北大核心 2024年第8期104-111,共8页
针对高温、碱性淋涌水(以下简称“碱水”)条件下锚杆腐蚀破坏造成的巷道严重变形与支护失效难题,以兖煤菏泽能化有限公司赵楼煤矿(以下简称“赵楼煤矿”)5305运输巷为研究背景,通过实验室实验,分析碱水、高温共同作用下锚杆腐蚀破坏特... 针对高温、碱性淋涌水(以下简称“碱水”)条件下锚杆腐蚀破坏造成的巷道严重变形与支护失效难题,以兖煤菏泽能化有限公司赵楼煤矿(以下简称“赵楼煤矿”)5305运输巷为研究背景,通过实验室实验,分析碱水、高温共同作用下锚杆腐蚀破坏特征和力学性能衰减规律,揭示锚杆腐蚀破坏机理,进而确定锚杆热浸锌防腐关键参数,并揭示其防腐机理。研究结果表明,锚杆腐蚀呈现出由肋间“点”到锚杆“面”的渐序腐蚀变化过程;锚杆体屈服载荷、破断载荷随侵蚀时间的增大呈线性下降,延伸率随侵蚀时间的增大呈负指数函数降低。高温、碱水作用下铁离子循环发生氧化和脱水反应,生成Fe_(2)O_(3)并脱落是锚杆腐蚀破坏的内在机理;锚杆热浸锌可有效提高其耐腐蚀性能,且最佳热浸锌厚度为60μm。高温、碱水作用下浸锌锚杆表面生产稳定的ZnO钝化层可有效阻止锚杆腐蚀破坏和力学性能衰减。通过赵楼煤矿现场工业性试验,验证了锚杆热浸锌防腐与围岩控制的有效性。 展开更多
关键词 高温 碱水 锚杆腐蚀 热浸锌防腐 巷道围岩控制
下载PDF
Synthesis of C_3N_4 crystals under high pressure and high temperature
14
作者 贺端威 张富祥 +4 位作者 张湘义 张明 刘日平 许应凡 王文魁 《Science China Mathematics》 SCIE 1998年第4期405-410,共6页
C\-3N\-4 crystals with the size of several micrometers have been synthesized from C\-3N\-4H\-4 in the presence of nickel\|based alloy or cobalt as catalyst under high pressure of 7 GPa and temperature of about 1400℃ ... C\-3N\-4 crystals with the size of several micrometers have been synthesized from C\-3N\-4H\-4 in the presence of nickel\|based alloy or cobalt as catalyst under high pressure of 7 GPa and temperature of about 1400℃ for 10 min. Scanning electron microscopy, energy\|disperse X\|ray analysis, and X\|ray diffraction were used to examine the grown crystals. The general rule on selecting the starting materials for synthesis of carbon nitride crystals at high pressures and high temperatures is suggested. 展开更多
关键词 C\-3N\-4 CRYSTALS high PRESSURE and temperature C\-3N\-4H\-4 catalyst.
原文传递
高温诱导叶用莴苣抽薹过程中内源激素含量变化分析 被引量:21
15
作者 刘慧 郝敬虹 +3 位作者 韩莹琰 刘超杰 苏贺楠 范双喜 《中国农学通报》 CSCD 2014年第25期97-103,共7页
为探讨高温诱导叶用莴苣抽薹过程中内源激素的变化规律,进而揭示内源激素与抽薹的相互关系,以易抽薹叶用莴苣品种‘G-B30’为试材,利用植物生长箱模拟夏季高温,分析了高温诱导叶用莴苣抽薹过程中茎和叶的赤霉素(GA)、生长素(IAA)、茉莉... 为探讨高温诱导叶用莴苣抽薹过程中内源激素的变化规律,进而揭示内源激素与抽薹的相互关系,以易抽薹叶用莴苣品种‘G-B30’为试材,利用植物生长箱模拟夏季高温,分析了高温诱导叶用莴苣抽薹过程中茎和叶的赤霉素(GA)、生长素(IAA)、茉莉酸甲酯(MeJA)、脱落酸(ABA)、玉米素核苷(ZR)、油菜素内酯(BR)含量的动态变化。结果表明,高温处理下,茎和叶在抽薹期(高温处理7天后)GA含量均显著高于抽薹前(高温处理前5天)。与对照相比,高温组茎中GA含量显著高于对照。高温处理组茎和叶中IAA、ABA、ZR含量抽薹期显著高于抽薹前,且高温组进入抽薹期时IAA、ABA含量也显著高于对照组。茎和叶BR含量表现为抽薹期显著低于抽薹前。与对照相比,高温组中抽薹期茎中BR含量明显降低而叶的BR含量无明显变化。高温处理组中茎和叶的MeJA含量均显著高于对照,且抽薹期显著低于抽薹前。综上所述,推测高水平的内源GA、IAA、ABA和ZR含量,低水平的BR可能促进叶用莴苣抽薹,而MeJA与叶用莴苣抽薹的关系不大。 展开更多
关键词 叶用莴苣 高温 抽薹 内源激素
下载PDF
10MW高温气冷堆压力容器主螺栓液压拉伸机 被引量:13
16
作者 刘俊杰 张征明 +2 位作者 王敏稚 王金海 何树延 《核动力工程》 EI CAS CSCD 北大核心 2000年第6期503-506,共4页
为了配合 10MW高温气冷堆 3个压力容器的安装与拆卸,清华大学核能技术设计研究院研制了 3种主螺栓拉伸机以代替昂贵的进口设备。本文对此拉伸机的研制情况、结构特点、设计参数、试验情况等方面作了描述,并给出螺栓预紧力的计算方法... 为了配合 10MW高温气冷堆 3个压力容器的安装与拆卸,清华大学核能技术设计研究院研制了 3种主螺栓拉伸机以代替昂贵的进口设备。本文对此拉伸机的研制情况、结构特点、设计参数、试验情况等方面作了描述,并给出螺栓预紧力的计算方法。这批拉伸机已成功地应用于 10MW高温堆 3个压力容器的出厂水压试验。 展开更多
关键词 高温气冷堆 压力容器 液压拉伸机 装卸工具
下载PDF
高强度螺栓受剪连接抗火性能试验研究 被引量:8
17
作者 范圣刚 舒赣平 霍昌盛 《东南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2012年第6期1180-1186,共7页
为了考察高强度螺栓受剪连接的抗火性能,用试验方法研究了其在高温状态下和过火冷却后的抗剪性能与行为反应.通过稳态升温试验,对5组(共8个)试件开展了火灾试验,研究了滑移荷载与极限荷载随温度的变化规律;通过常温下试验,研究了6组(共1... 为了考察高强度螺栓受剪连接的抗火性能,用试验方法研究了其在高温状态下和过火冷却后的抗剪性能与行为反应.通过稳态升温试验,对5组(共8个)试件开展了火灾试验,研究了滑移荷载与极限荷载随温度的变化规律;通过常温下试验,研究了6组(共15个)过火后试件的受力性能,揭示了过火温度、过火处理方法和冷却方式对滑移荷载的影响.结果表明:当温度超过350℃时,滑移荷载与极限荷载随温度升高急剧下降;过火温度越高,冷却后试件的滑移荷载值越小,且不同过火处理和冷却方式的试件滑移荷载值是不相同的.拟合出了高温下滑移荷载与极限荷载折减系数以及过火后滑移荷载折减系数的近似计算公式,建议高强度螺栓受剪连接抗火分析的临界温度取350℃,为钢结构抗火研究提供参考依据. 展开更多
关键词 高强度螺栓 受剪连接 抗火性能 高温
下载PDF
螺栓材料1Cr10NiMoW2VNbN的应力松弛行为及预测模型 被引量:14
18
作者 郭进全 轩福贞 何磊 《核动力工程》 EI CAS CSCD 北大核心 2008年第6期119-124,共6页
为了研究和预测国产螺栓材料1Cr10NiMoW2VNbN的长时应力松弛性能,对该材料进行了应力松弛试验。研究了环境温度、初应力对松弛行为的影响;分析了利用Hook-Norton模型、广义Maxwell模型、Logistic模型以及多项式模型进行长时数据外推的... 为了研究和预测国产螺栓材料1Cr10NiMoW2VNbN的长时应力松弛性能,对该材料进行了应力松弛试验。研究了环境温度、初应力对松弛行为的影响;分析了利用Hook-Norton模型、广义Maxwell模型、Logistic模型以及多项式模型进行长时数据外推的可行性。结果表明:温度对螺栓松弛行为影响最大,实验数据难以推断应力松弛极限存在;所建立的双对数多项式模型可以较好地外推松弛剩余应力。 展开更多
关键词 应力松弛 高温螺栓材料 松弛试验 数据外推
下载PDF
复合材料与高温合金螺栓连接的热适配技术 被引量:7
19
作者 谭志勇 费庆国 +2 位作者 吴宏伟 张宏宇 姜东 《东南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2017年第2期337-342,共6页
为了改善高温环境下螺栓连接力学性能,避免热膨胀不匹配所导致的预紧力松弛,研究了高温合金螺栓连接的热适配技术.首先,推导了热适配螺栓的外形参数,指出高温合金热适配螺栓与复合材料的接触面应满足旋转对称的指数轮廓.然后,考虑到螺... 为了改善高温环境下螺栓连接力学性能,避免热膨胀不匹配所导致的预紧力松弛,研究了高温合金螺栓连接的热适配技术.首先,推导了热适配螺栓的外形参数,指出高温合金热适配螺栓与复合材料的接触面应满足旋转对称的指数轮廓.然后,考虑到螺栓拧紧力矩试验通常在常温下进行,通过比较常、高温条件下的强度性能,推导出高温条件下螺栓预紧力矩的合理取值.最后,开展了普通螺栓与高温合金热适配螺栓典型连接单元的静力试验和振动试验.试验结果表明,热适配连接单元在高温下未发生预紧力矩松弛,而普通螺栓预紧力矩则明显下降,从而验证了所提热适配技术的有效性. 展开更多
关键词 复合材料 热结构 高温合金螺栓 热适配连接 预紧力矩
下载PDF
600MW超临界机组高温螺栓的检验 被引量:6
20
作者 王勇 董国振 +2 位作者 王庆军 麻志兴 刘勇 《热加工工艺》 CSCD 北大核心 2012年第16期79-81,共3页
结合4台600 MW超临界新建机组基建现场高温螺栓的检验,从高温螺栓的宏观、光谱、硬度、金相及超声波探伤检验等方面介绍了检验过程中应注意的事项。
关键词 高温螺栓 硬度 金相 光谱 超声波探伤
下载PDF
上一页 1 2 9 下一页 到第
使用帮助 返回顶部