A high temperature displacement sensor based on the principle of eddy-current is investigated. A new temperature compensation technique by using eddy-current effect is presented to satisfy the special requirement at h...A high temperature displacement sensor based on the principle of eddy-current is investigated. A new temperature compensation technique by using eddy-current effect is presented to satisfy the special requirement at high temperature up to 550℃. The experiment shows that the temperature compensation technique leads to good temperature stability for the sensors. The variation of the sensitivity as well as the temperature drift of the sensor with temperature compensation technique is only about 7.4% and 90-350 mV at 550 ℃ compared with that at room temperature, and that of the sensor without temperature compensation technique is about 31.2% and 2-3 V at 550 ℃ compared with that at room temperature. A new dynamic calibration method for the eddy-current displacement sensor is presented, which is very easy to be realized especially in high frequency and at high temperatures. The high temperature displacement sensors developed are successfully used at temperature up to 550 ℃ in a magnetic bearing system for more than 100 h.展开更多
A study to estimate land surface movement caused by large surface excavations in sedimentary strata is presented.In stratified or jointed strata the stress relief driven movement adjacent to large excavations can be s...A study to estimate land surface movement caused by large surface excavations in sedimentary strata is presented.In stratified or jointed strata the stress relief driven movement adjacent to large excavations can be significantly larger than expected.High lateral stresses measured in Australia and other places around the world indicate that the ratio of horizontal to vertical stress has been particularly high at shallow depths.The in situ strata is in compression and during excavation,stress is relieved towards the opening causing strata movement.Large excavations such as,open cut mines or highway cuttings,can initiate an extensive horizontal slide of surface layers towards the excavation.These ground movements can be damaging to surface structures such as water storage dams and large buildings.Based on stress measurements at shallow depths in Australian coal mines the study presented here calculates and models the extent of potential ground movement along the bedding surface adjacent to large excavations and provides a new prediction tool of land movement at the excavation boundary that can benefit the geotechnical practitioners in the mining industry.展开更多
基金This project is supported by European Community Project, National NaturalScience Foundation of China (No.50437010) and Aviation Science Founda-tion of China (No.99C52072).
文摘A high temperature displacement sensor based on the principle of eddy-current is investigated. A new temperature compensation technique by using eddy-current effect is presented to satisfy the special requirement at high temperature up to 550℃. The experiment shows that the temperature compensation technique leads to good temperature stability for the sensors. The variation of the sensitivity as well as the temperature drift of the sensor with temperature compensation technique is only about 7.4% and 90-350 mV at 550 ℃ compared with that at room temperature, and that of the sensor without temperature compensation technique is about 31.2% and 2-3 V at 550 ℃ compared with that at room temperature. A new dynamic calibration method for the eddy-current displacement sensor is presented, which is very easy to be realized especially in high frequency and at high temperatures. The high temperature displacement sensors developed are successfully used at temperature up to 550 ℃ in a magnetic bearing system for more than 100 h.
文摘A study to estimate land surface movement caused by large surface excavations in sedimentary strata is presented.In stratified or jointed strata the stress relief driven movement adjacent to large excavations can be significantly larger than expected.High lateral stresses measured in Australia and other places around the world indicate that the ratio of horizontal to vertical stress has been particularly high at shallow depths.The in situ strata is in compression and during excavation,stress is relieved towards the opening causing strata movement.Large excavations such as,open cut mines or highway cuttings,can initiate an extensive horizontal slide of surface layers towards the excavation.These ground movements can be damaging to surface structures such as water storage dams and large buildings.Based on stress measurements at shallow depths in Australian coal mines the study presented here calculates and models the extent of potential ground movement along the bedding surface adjacent to large excavations and provides a new prediction tool of land movement at the excavation boundary that can benefit the geotechnical practitioners in the mining industry.
