Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevla...Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevlar polyanionic chains, thermoplastic polyurethane(TPU) foams reinforced by aramid nanofibers(ANF) with adjustable pore-size distribution were successfully obtained via a nonsolvent-induced phase separation. In this regard, the most outstanding result is the in situ formation of ANF in TPU foams after protonation of Kevlar polyanion during the NIPS process. Furthermore, in situ growth of copper nanoparticles(Cu NPs) on TPU/ANF foams was performed according to the electroless deposition by using the tiny amount of pre-blended Ti_(3)C_(2)T_(x) MXene as reducing agents. Particularly, the existence of Cu NPs layers significantly promoted the storage modulus in 2,932% increments, and the well-designed TPU/ANF/Ti_(3)C_(2)T_(x) MXene(PAM-Cu) composite foams showed distinguished compressive cycle stability. Taking virtues of the highly ordered and elastic porous architectures, the PAM-Cu foams were utilized as piezoresistive sensor exhibiting board compressive interval of 0–344.5 kPa(50% strain) with good sensitivity at 0.46 kPa^(-1). Meanwhile,the PAM-Cu foams displayed remarkable EMI shielding effectiveness at 79.09 dB in X band. This work provides an ideal strategy to fabricate highly ordered TPU foams with outstanding elastic recovery and excellent EMI shielding performance, which can be used as a promising candidate in integration of satisfactory piezoresistive sensor and EMI shielding applications for human–machine interfaces.展开更多
The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based ...The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based on nanostructured Ni_3S_2/Ni foam@RGO(NSNR) composite anode is developed, utilizing graphite as cathode material and LiPF6-VC-based solvent as electrolyte. The battery operates at high working voltage of 4.2–4.5 V, with superior discharge capacity of ～90 m A h g^(-1) at 100 mA g^(-1), outstanding rate performance, and long-term cycling stability over 500 cycles with discharge capacity retention of ～85.6%. Moreover, the composite simultaneously acts as the anode material and the current collector, and the corrosion phenomenon can be greatly reduced compared to metallic Al anode. Thus, this work represents a significant step forward for practical safe, low-cost and high working voltage dual-ion batteries,showing attractive potential for future energy storage application.展开更多
The influences of ultra-high hydrostatic pressure treatment on foaming and physical properties (solubility, hydrophobicity and sulfhydryl content) of egg white were investigated. A pressure range of 0-500 MPa, time ra...The influences of ultra-high hydrostatic pressure treatment on foaming and physical properties (solubility, hydrophobicity and sulfhydryl content) of egg white were investigated. A pressure range of 0-500 MPa, time range of 0-20 min and pH range of 7.5-8.5 were selected. The foaming property of egg white is improved by 350Mpa and 10min. The treatment resulted in in- crease of sulfhydryl content of egg white, while solubility and hydrophobicity were significantly decreased.展开更多
In order to get foam zinc materials of porous metal electrode,a novel method for preparing foam zinc was proposed,in which the polyurethane foam with diameter of 0.3 mm as substrate was processed by degreasing,roughen...In order to get foam zinc materials of porous metal electrode,a novel method for preparing foam zinc was proposed,in which the polyurethane foam with diameter of 0.3 mm as substrate was processed by degreasing,roughening,activating,electroless plating and electrodeposition.The main factors affecting the process,such as ZnSO4 content,temperature,pH value,current density,and electrodes distance,were investigated comprehensively.The optimal process conditions are 250 g/L ZnSO4,20 g/L Al2（SO4）3,40 g/L KAl（SO4）2,30 g/L Na2SO4,pH=3.5,4.0 cm of electrodes distance and 0.04 A/cm2 current density at 30 ℃.The result shows that adding ultrasonic on the process can elevate the deepening plating ability and current efficiency.Foam zinc material with a high porosity of 92.2% and a three-dimensional network structure can be fabricated by electrodeposition.展开更多
A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step ...A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step carbonization.In addition,the carbon foam possesses suitable interlayer spacing in short range which is flexible to accommodate the deformation of carbon layer caused by the ion insertion and deinsertion at the charge and discharge state.Furthermore,a low cost carbon-based symmetric potassium dual-ion capacitor(PDIC),which integrates the virtues of potassium ion capacitors and dual-ion batteries,is successfully established with CFMS as both the battery-type cathode and the capacitor-type anode.PDIC displays a superior rate performance,an ultra-long cycle life(90%retention after 10000 cycles),and a high power density of 7800 W kg^-1 at an energy density of 39Whkg^-1.The PDIC also exhibits excellent ultrafast charge and slow discharge properties,with a full charge in just 60 s and a discharge time of more than 3000 s.展开更多
基金financially sponsored by the Science and Technology Commission of Shanghai Municipality (20230742300 and 18595800700)Key Laboratory of Resource Chemistry, Ministry of Education (KLRC_ME2103)the project of “joint assignment” in Shanghai University led by Prof. Tongyue Gao from School of Mechatronic Engineering and Automation。
文摘Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevlar polyanionic chains, thermoplastic polyurethane(TPU) foams reinforced by aramid nanofibers(ANF) with adjustable pore-size distribution were successfully obtained via a nonsolvent-induced phase separation. In this regard, the most outstanding result is the in situ formation of ANF in TPU foams after protonation of Kevlar polyanion during the NIPS process. Furthermore, in situ growth of copper nanoparticles(Cu NPs) on TPU/ANF foams was performed according to the electroless deposition by using the tiny amount of pre-blended Ti_(3)C_(2)T_(x) MXene as reducing agents. Particularly, the existence of Cu NPs layers significantly promoted the storage modulus in 2,932% increments, and the well-designed TPU/ANF/Ti_(3)C_(2)T_(x) MXene(PAM-Cu) composite foams showed distinguished compressive cycle stability. Taking virtues of the highly ordered and elastic porous architectures, the PAM-Cu foams were utilized as piezoresistive sensor exhibiting board compressive interval of 0–344.5 kPa(50% strain) with good sensitivity at 0.46 kPa^(-1). Meanwhile,the PAM-Cu foams displayed remarkable EMI shielding effectiveness at 79.09 dB in X band. This work provides an ideal strategy to fabricate highly ordered TPU foams with outstanding elastic recovery and excellent EMI shielding performance, which can be used as a promising candidate in integration of satisfactory piezoresistive sensor and EMI shielding applications for human–machine interfaces.
基金supported by the National Natural Science Foundation of China (No. 51725401)the Fundamental Research Funds for the Central Universities (FRF-TP-15-002C1 and FRF-TP17-002C2)
文摘The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based on nanostructured Ni_3S_2/Ni foam@RGO(NSNR) composite anode is developed, utilizing graphite as cathode material and LiPF6-VC-based solvent as electrolyte. The battery operates at high working voltage of 4.2–4.5 V, with superior discharge capacity of ～90 m A h g^(-1) at 100 mA g^(-1), outstanding rate performance, and long-term cycling stability over 500 cycles with discharge capacity retention of ～85.6%. Moreover, the composite simultaneously acts as the anode material and the current collector, and the corrosion phenomenon can be greatly reduced compared to metallic Al anode. Thus, this work represents a significant step forward for practical safe, low-cost and high working voltage dual-ion batteries,showing attractive potential for future energy storage application.
文摘The influences of ultra-high hydrostatic pressure treatment on foaming and physical properties (solubility, hydrophobicity and sulfhydryl content) of egg white were investigated. A pressure range of 0-500 MPa, time range of 0-20 min and pH range of 7.5-8.5 were selected. The foaming property of egg white is improved by 350Mpa and 10min. The treatment resulted in in- crease of sulfhydryl content of egg white, while solubility and hydrophobicity were significantly decreased.
基金Funded by the Science and Technology Planning Project of Hunan Province,China(No.2010FJ3117)
文摘In order to get foam zinc materials of porous metal electrode,a novel method for preparing foam zinc was proposed,in which the polyurethane foam with diameter of 0.3 mm as substrate was processed by degreasing,roughening,activating,electroless plating and electrodeposition.The main factors affecting the process,such as ZnSO4 content,temperature,pH value,current density,and electrodes distance,were investigated comprehensively.The optimal process conditions are 250 g/L ZnSO4,20 g/L Al2（SO4）3,40 g/L KAl（SO4）2,30 g/L Na2SO4,pH=3.5,4.0 cm of electrodes distance and 0.04 A/cm2 current density at 30 ℃.The result shows that adding ultrasonic on the process can elevate the deepening plating ability and current efficiency.Foam zinc material with a high porosity of 92.2% and a three-dimensional network structure can be fabricated by electrodeposition.
基金financially supported by the National Natural Science Foundation of China(Nos.51672078 and 21473052)Hunan University State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Independent Research Project(No.71675004)+2 种基金the Fundamental Research Funds for the Central UniversitiesHunan Natural Science Foundation(2019JJ40031)Foundation of State Key Laboratory of Coal Conversion(Grant J1718-903)。
文摘A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step carbonization.In addition,the carbon foam possesses suitable interlayer spacing in short range which is flexible to accommodate the deformation of carbon layer caused by the ion insertion and deinsertion at the charge and discharge state.Furthermore,a low cost carbon-based symmetric potassium dual-ion capacitor(PDIC),which integrates the virtues of potassium ion capacitors and dual-ion batteries,is successfully established with CFMS as both the battery-type cathode and the capacitor-type anode.PDIC displays a superior rate performance,an ultra-long cycle life(90%retention after 10000 cycles),and a high power density of 7800 W kg^-1 at an energy density of 39Whkg^-1.The PDIC also exhibits excellent ultrafast charge and slow discharge properties,with a full charge in just 60 s and a discharge time of more than 3000 s.
