High-power High-efficient and Simplified High-frequency Switching Power Supply for Electrolytic Plating

针对大功率电解电镀开关电源的输入整流级引起的无功和谐波等电能质量问题,研究了一种基于高效PWM整流的高频开关电源。该电源前级整流器仅用4个开关管来进行PWM整流,后级采用半桥逆变器进行高频变换,显著减少了开关数量。针对三相四开关PWM整流器,推导一种基于开关模型的无差拍控制方法,该方法可实现系统的快速、无差整流。针对多台开关电源的并联均流问题,提出一种基于虚拟阻抗的自均流控制方法,可实现多台电源的均流稳定运行。通过仿真与实验验证了所提结构和控制方法的正确性。

Simulation realization of skip cycle mode integrated control circuit in the switching power supply with low standby loss

This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.

A Novel Half-Bridge Power Supply for High Speed Drilling Electrical Discharge Machining

High Speed Drilling Electrical Discharge Machining (HSDEDM) uses controlled electric sparks to erode the metal in a work-piece. Through the years, HSDEDM process has widely been used in high speed drilling and in manufacturing large aspect ratio holes for hard-to-machine material. The power supplies of HSDEDM providing high power applica-tions can have different topologies. In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge HSDEDM power supply that achieves Zero-Voltage-Switching (ZVS) for switches and Zero-Current-Switching (ZCS) for the dis-charge gap has been developed. This power supply has excellent features that include minimal component count and inherent protection under short circuit conditions. This topology has an energy conservation feature and removes the need for output bulk capacitors and resistances. Energy used in the erosion process will be controlled by the switched IGBTs in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.

Design and Simulation of a Electrorheological(ER) Control High Voltage Power Supply

Few applications with electrorheological （ER） fluids have been found in industry. One reason is high voltage power supplies cannot meet the requirement for ER effect. In this paper, an ER control high voltage power supply for engineering application was designed which reduced power wastage by adopting soft switch technology; lessened its volume to satisfy micromation when adopting the planar transformer and improved its response character- istic by choosing an assistant discharging circuit. Simultaneously, a simulation analysis has been carried out. As results, the output voltage of this high voltage power supply is 5 kV, and the voltage can be continuously regulated and the voltage ripple is only 0. 7 %, so the requirement of stability is also achieved.

Investigation on latch-up susceptibility induced by high-power microwave in complementary metal–oxide–semiconductor inverter

The latch-up effect induced by high-power microwave（HPM） in complementary metal–oxide–semiconductor（CMOS） inverter is investigated in simulation and theory in this paper. The physical mechanisms of excess carrier injection and HPM-induced latch-up are proposed. Analysis on upset characteristic under pulsed wave reveals increasing susceptibility under shorter-width pulsed wave which satisfies experimental data, and the dependence of upset threshold on pulse repetitive frequency（PRF） is believed to be due to the accumulation of excess carriers. Moreover, the trend that HPMinduced latch-up is more likely to happen in shallow-well device is proposed.Finally, the process of self-recovery which is ever-reported in experiment with its correlation with supply voltage and power level is elaborated, and the conclusions are consistent with reported experimental results.

A Study on the Conducted Interference of Capacitor Charging Power Supply

In this paper, a mathematical analysis of the EMI (Electromagnetic Interference) for a 20 kHz/10 kV capacitor charging power supply in frequency-domain is presented, and a related circuit model considering the transient switching interference is proposed. Due to the high working frequency and the device-switching transitions, the conducted EMI caused by the charging circuit which includes the harmonics of grid frequency, working frequency and device-switching transition frequencies. Thus under certain working situations or loads parallel power supply, the interference may cause charging failure. To solve this problem, a high frequency transformer modeled with stray capacitances and an approximation of the device-switching transition is applied in the Spice-based simulation model, and a mathematical analysis in frequency-domain is presented.

Air-Water Cooling System for Switch-Mode Power Supplies

The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by high power and high compactness, thereby making the standard cooling techniques difficult to be used, a new cooling system is developed, using water and air as the cooling media. The active components (MOSFETs) are cooled with a liquid cold-plate, the passive ones (condensers, transformers, coils) with an air flow, in turn cooled by the cold-plate. By inserting the cooling system in an experimental tool where it is possible to control the cooling water, measurements are made of temperature in the significant points of the SMPS. The electric efficiency is also measured. The evaluation of the thermal performance of this cooling system is useful in order to limit its maximum operational temperature. The efficacy of the cooling system is demonstrated;the trends of efficiency and power dissipation are evidenced.

Design and Implementation of Smart Power Voltage and Frequency Synchroniser in Power Distribution System

Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.

基于PowerEsim的开关电源的高频变压器设计

高频开关电源中,变压器受更多寄生参数的影响,对开关电源的影响也越来越大。因此,高频开关电源设计时,高频变压器的设计是重中之重。本文对高频变压器的设计进行了分析,应用PowerEsim软件对变压器的参数进行了优化,提高了开关电源的效率。

Study of Sliding Mode Control of DC-DC Buck Converter

In this paper, a robust sliding mode controller for the control of dc-dc buck converter is designed and analyzed. Dynamic equations describing the buck converter are derived and sliding mode controller is designed. A two-loop control is employed for a buck converter. The robustness of the sliding mode controlled buck converter system is tested for step load changes and input voltage variations. The theoretical predictions are validated by means of simulations. Matlab/Simulink is used for the simulations. The simulation results are presented. The buck converter is tested with operating point changes and parameter uncertainties. Fast dynamic response of the output voltage and robustness to load and input voltage variations are obtained.

Application of GaN in Hard-switching Converters:Challenges and Potential Solutions

This paper overviews the benefits,challenges,research trends and potential solutions on the design and application of gallium nitride(GaN) technology in hard-switching power electronic converters from the device level up to converter level.

一种低延时低功耗PWM比较器电路设计

设计了一种基于HHGrace 0.35μm BCD工艺的低延时低功耗电压型静态脉冲宽度调制(Pulse Width Modulation,PWM)比较器,主要应用于高频低功耗的开关电源系统。设计中包含动态尾电流源和改进型正反馈放大器,以改进传统跨导放大器(Operational Transconductance Amplifier,OTA)型比较器高延迟和高功耗等问题。仿真结果表明:在1.2~5.0 V供电电压范围内稳定工作,最大上升沿延时35 ns,最大下降沿延时41 ns,支持6 MHz开关频率的系统,比较精度8 mV,失调电压439μV,静态功耗仅为2.5μA(1.2 V供电)和4.4μA(5.0 V供电)。

机载雷达开关电源新型防浪涌电路设计

针对机载雷达开关电源防浪涌电路在瞬态频繁开关机情况下失效率高的问题,研究了一种新型防浪涌电路。通过将栅源驱动电路和主功率充放电回路分离,分别对两个充放电时间常数独立设计,消除相关性,实现开关电源在瞬态频繁开关机状况下的有效防冲击保护。文中对常规和新型两种防浪涌电路进行了对比分析,仿真和试验结果证明了新型防浪涌电路的有效性。该电路同时具备输入防反接功能,已广泛应用于机载雷达开关电源设计。

混合级联十一电平逆变器功率与开关损耗双均衡倍频调制方法

混合级联多电平逆变器可以利用较少的开关器件实现较高电平输出,进而得到了广泛应用;但实现高低压单元间功率均衡难度更大。直流侧采用电池组模块进行供电时,功率达不到均衡会使得各H桥单元对应的电池组模块处于不同的放电特性,增大了故障概率和维修难度且增加了后期的维修成本。针对此问题,提出2种1:1:1:2混合级联十一电平逆变器功率和开关损耗双均衡倍频调制方法。首先,2种方法分别对3个低压单元采用三角载波、重构载波进行移相,从而实现在全调制度范围内将逆变器的等效开关频率由fc提高至6fc/12fc;使得低压单元各开关器件开关次数均围绕在60次/174次左右上下浮动,实现了低压单元内开关损耗均衡;使得调制度M=0.9/0.6/0.3时低压单元输出功率均围绕在657.5 W/293.5 W/73.5 W上下浮动,实现低压单元间的功率均衡,其次对高压单元采用阶梯波低频调制,随调制度的变化对导通角进行动态调整,使得高压单元各开关器件开关次数均为1次,实现了高低压单元内开关损耗均衡;使得调制度M=0.9/0.6/0.3时高压单元与低压单元输出功率均围绕在1317 W/657.5 W、586 W/293.5 W、146.5 W/73.5 W上下浮动,实现了高低压单元间功率均衡,之后对比分析2种方法各自的优缺点及其适用场合。最后,通过实验验证该方法的正确性和可行性,并给出了直流电压比为1:1:1:...:x的混合级联H桥逆变器双均衡的普适方法。

矿用隔爆高压配电装置保护及控制电源设计

针对目前井下矿用隔爆高压配电装置保护及控制电源与供电系统同源存在的问题进行分析,提出了矿用独立电源供电的方式。对矿用隔爆高压配电装置保护及控制供电方式进行了分析与设计;对矿用隔爆高压配电装置用独立电源进行了设计;对矿用隔爆高压配电装置保护控制供电方式进行了研究,进一步对其进行了保护控制供电设计和电源切换装置设计。实现了保护及控制供电一用一备独立供电,保障供电系统的安全运行。目前该供电方式已经在潞安化工集团、晋能控股集团的大型矿井实现了井下应用。

计及高比例新能源多种控制方式及运行约束的连续潮流

高比例新能源电网的电压稳定问题突出,连续潮流是电压稳定分析的重要工具。现有含电压源换流器(VSC)电源电网的连续潮流未充分考虑VSC的多种控制方式以及运行约束,导致电压稳定裕度计算的准确性不足。文中提出同时计及新能源并网VSC的输出电流约束和内电势约束,以及考虑构网型新能源恒电压控制、无功功率-电压下垂控制和跟网型新能源恒无功控制的连续潮流模型和计算方法,给出了由约束导致的控制方式切换逻辑和分岔点类型识别方法。通过改造的IEEE 39节点系统算例结果表明,所提模型与算法提升了传统连续潮流方法对高比例新能源电网静态电压稳定分析的适用性。

基于电磁干扰对消EMI有源滤波模块设计

针对火控设备因开关电源电磁干扰所引起的辐射超标问题,基于差模与共模结合的混合抑制原理,运用电磁干扰对消技术,制作一款小型化的有源滤波模块。该模块尺寸为25.4 mm×25.4 mm×6.0 mm,满足低剖面及便于电路板集成的需求。经实测,其能够抑制10 kHz~10 MHz频段内电源干扰,满足GJB 151B相关电磁兼容要求。通过实测比较发现,与无源滤波相比,其具有体积小、成本低、滤波性能稳定等优点。

广播电视制播工程项目中UPS的选用研究

对于广播电视制播工程项目,为确保直播内容安全播出和内容编辑的时效性,与直播相关的系统和内容编辑系统的核心设备需要接入不间断电源(Uninterruptible Power Supply,UPS)供电回路。因此,在供配电系统设计过程中,如何选择合适的UPS电源设备技术架构成为一个关键问题。主要探讨了广播电视制播工程项目中UPS电源设备的选用,对UPS高频机和UPS工频机进行了比较分析,进而给出了广播电视制播工程中UPS电源设备的选用策略。

成渝中线铁路双边供电牵引网接线方案研究

成渝中线综合试验段作为CR450科技创新工程的示范应用线路,将开行CR450新型动车组。CR450动车组功率的提升对牵引供电系统供电能力提出了更高要求,因此《成渝中线高速铁路设计暂行规范》提出“条件允许时可采用双边供电方式”。本文分析了牵引供电系统双边供电方式下牵引网3种接线方案及运行方式,对比优缺点,明确了成渝中线双边供电牵引网接线方案,并就不同接线方案工程适应性提出建议。

交、直流机车混跑线路车网谐振机理分析及宽频域谐波综合治理研究

在交-直-交电力机车和交-直电力机车混跑线路的牵引供电系统中,存在丰富的宽频域谐波电流,且易产生车网谐振问题。文章首先采用谐波阻抗分析法建立了牵引网谐波阻抗电路模型,推导了牵引网谐振阻抗与谐波频率及供电臂长度的函数关系,分析车网谐振产生机理和谐振特性,给出了车网谐振治理方式及装置安装位置的选择;然后,针对目前牵引网的宽频域谐波,提出一种地面加装有源电力滤波器(active power filter,APF)和无源高通滤波器(high pass filter,HPF)的综合治理方法,并给出“APF+HPF”装置的工程设计方法;最后,结合国内某铁路牵引网案例进行仿真验证。仿真结果显示,采用该方法后谐波电流总畸变率由75.29%下降到1.58%(“APF+二阶HPF”滤波器)和2.55%(“APF+阻波HPF”滤波器),证明该方法对宽频域谐波具有良好的治理效果,能有效抑制车网谐振现象并消除其危害,保障了牵引供电系统的安全运行。