Thin films of poly（3-hexadecyl pyrrole） （P3HDP） nanoparticles have been fabricated by using Langmuir-Blodgett film deposition technique. The structures and morphology of the films were studied by using infrared sp...Thin films of poly（3-hexadecyl pyrrole） （P3HDP） nanoparticles have been fabricated by using Langmuir-Blodgett film deposition technique. The structures and morphology of the films were studied by using infrared spectroscopy, scanning and transmission microscopes. The experimental results demonstrated that the nanoparticles were formed by self-assembling P3HDP at air-water surface. The water contact angles of these films with different deposition layers were measured to be as high as 110°.展开更多
Based on the different hydrophobicities of the intermediates of proteins the various conformational intermediates of the refolding of a-amylase originally denatured with 8.0 mol/L urea solution were separated with hi...Based on the different hydrophobicities of the intermediates of proteins the various conformational intermediates of the refolding of a-amylase originally denatured with 8.0 mol/L urea solution were separated with high performance hydrophobic interaction chromatography(HPHIC). Compared to the separation of the same intermediates with weak anion exchange chromatography and size-exclusion chromatography the result obtained with HPHIC is the best It would be expected that HPHIC may be a strongly potential tool to separate intermediates of some proteins which cannot be, or cannot completely be refolded by HPHIC.展开更多
Interface engineering is an effective way to improve efficiency and long-term stability of perovskite solar cells(PSCs).Herein,an ionic compound tetrabutylammonium hexafluorophosphate(TP6)is adopted to passivate surfa...Interface engineering is an effective way to improve efficiency and long-term stability of perovskite solar cells(PSCs).Herein,an ionic compound tetrabutylammonium hexafluorophosphate(TP6)is adopted to passivate surface defects of the perovskite film.It is found that TP6 effectively reduced the surface defects,especially at the grain boundaries where the defects are abundant.Meanwhile,the exposed long alkyl chains and fluorine atoms in the TP6 enhanced the moisture stability of the perovskite film due to its strong hydrophobicity.In addition,the driving force of charge carrier separation and transport is increased by enlarged built-in potential.Consequently,the power conversion efficiency(PCE)of PSCs is significantly improved from 20.59% to 22.41%by increased open-circuit voltage(V_(oc))and fill factor(FF).The unencapsulated device with TP6 treatment exhibits better stability than the control device,and the PCE retains-80%of its initial PCE after 30 days under 15%-25%relative humidity in storage,while the PCE of the control device declines by more than 50%.展开更多
基金This work was supported by the National Natural Science Foundation of China (Nos. 50225311, 20374034, 50133010) and 973 Project (No. 2003CB615700).
文摘Thin films of poly（3-hexadecyl pyrrole） （P3HDP） nanoparticles have been fabricated by using Langmuir-Blodgett film deposition technique. The structures and morphology of the films were studied by using infrared spectroscopy, scanning and transmission microscopes. The experimental results demonstrated that the nanoparticles were formed by self-assembling P3HDP at air-water surface. The water contact angles of these films with different deposition layers were measured to be as high as 110°.
文摘Based on the different hydrophobicities of the intermediates of proteins the various conformational intermediates of the refolding of a-amylase originally denatured with 8.0 mol/L urea solution were separated with high performance hydrophobic interaction chromatography(HPHIC). Compared to the separation of the same intermediates with weak anion exchange chromatography and size-exclusion chromatography the result obtained with HPHIC is the best It would be expected that HPHIC may be a strongly potential tool to separate intermediates of some proteins which cannot be, or cannot completely be refolded by HPHIC.
基金funded by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA17040506)the National Key Research and Development Program of China (2017YFA0204800/2016YFA0202403)+6 种基金the Key Program project of the National Natural Science Foundation of China (51933010)the National Natural Science Foundation of China (61974085)the 111 Project (B21005)the Changjiang Scholars and Innovative Research Team (IRT_14R33)the National University Research Fund (GK201903051)the Research Start-up Fund from Shaanxi Normal University (1110020142)the Shanxi Science and Technology Department (20201101012).
文摘Interface engineering is an effective way to improve efficiency and long-term stability of perovskite solar cells(PSCs).Herein,an ionic compound tetrabutylammonium hexafluorophosphate(TP6)is adopted to passivate surface defects of the perovskite film.It is found that TP6 effectively reduced the surface defects,especially at the grain boundaries where the defects are abundant.Meanwhile,the exposed long alkyl chains and fluorine atoms in the TP6 enhanced the moisture stability of the perovskite film due to its strong hydrophobicity.In addition,the driving force of charge carrier separation and transport is increased by enlarged built-in potential.Consequently,the power conversion efficiency(PCE)of PSCs is significantly improved from 20.59% to 22.41%by increased open-circuit voltage(V_(oc))and fill factor(FF).The unencapsulated device with TP6 treatment exhibits better stability than the control device,and the PCE retains-80%of its initial PCE after 30 days under 15%-25%relative humidity in storage,while the PCE of the control device declines by more than 50%.
