High Velocity Impact Experiment on Ti/CFRP/Ti Sandwich Structure

Aircraft laminated composite components often suffer a variety of high velocity impacts with large quantity of energy,which usually affects aircraft behavior and would incur component damages,even disastrous consequences.Therefore,one investigates the impact resistance of a new type of composite material,Ti/CFRP/Ti sandwich structure,and launches impact tests by using an air gun test system.Then one acquires the critical breakthrough rate of the structure and analyzes the damages.The results show that the main failure mode of the front titanium sheet is shear plugging and brittle fracture of adhesive layer with fiber breakage,while the back titanium sheet is severely ripped.The rear damage is worse than the front one.Compared with traditional CFRP laminates,the critical breakthrough rate of Ti/CFRP/Ti sandwich structure is improved by 69.9% when suffered the impact of a bearing ball with 2mm radius.

A DAMAGE ACCUMULATING MODELING OF FAILURE WAVES IN GLASS UNDER HIGH VELOCITY IMPACT

The failure wave phenomenon was interpreted in glass media under the high velocity impact with the stress levels below the Hugoniot elastic limit. In view of the plate impact experimental observations a damage-accumulating model predominated by the deviatoric stress impulse was proposed while Heaviside function was adopted in the damage-accumulating model to describe the failure delay in the interior of Materials. Features of the failure layer and propagation mechanism as well as their dynamic characteristics were further presented. The reduction in failure wave propagation speed is pointed out as the reflected rarefaction waves reflect again from the failure layer boundary.

THE APPLICATION OF COMPATIBLE STRESS ITERATIVE METHOD IN DYNAMIC FINITE ELEMENT ANALYSIS OF HIGH VELOCITY IMPACT

There is a common difficulty in elastic-plastic impact codes such as EPIC[2,3] NONSAP[4], etc.. Most of these codes use the simple linear functions usually taken from static problem to represent the displacement components. In such finite element formulation, the stress components are constant in each element and they are discontinuous in any two neighboring elements. Therefore, the bases of using the virtual work principle in such elements are unreliable. In this paper, we introduce a new method, namely, the compatible stress iterative method, to eliminate the above-said difficulty. The calculated examples show that the calculation using the new method in dynamic finite element analysis of high velocity impact is valid and stable, and the element stiffness can be somewhat reduced.

How does a woodpecker work? An impact dynamics approach

To understand how a woodpecker is able accelerate its head to such a high velocity in a short amount of time,a multi-rigid-segment model of a woodpecker＇s body is established in this study.Based on the skeletal specimen of the woodpecker and several videos of woodpeckers pecking,the parameters of a three-degree-of-freedom system are determined.The high velocity of the head is found to be the result of a whipping effect,which could be affected by muscle torque and tendon stiffness.The mechanism of whipping is analyzed by comparing the response of a hinged rod to that of a rigid rod.Depending on the parameters,the dynamic behavior of a hinged rod is classified into three response modes.Of these,a high free-end velocity could be achieved in mode II.The model is then generalized to a multihinge condition,and the free-end velocity is found to increase with hinge number,which explains the high free-end velocity resulting from whipping.Furthermore,the effects of some other factors,such as damping and mass distribution,on the velocity are also discussed.

A TWO-DIMENSIONAL LAGRANGIAN TECHNIQUE FOR FLOW FIELD MEASUREMENT UNDER HIGH DYNAMIC PRESSURE

In this paper,a two-dimensional(2-D)Lagrangian technique for flow field measurement under high dynamic pressure is presented,which includes a set of experimental device and 2-D Lagrange composite manganin-constantan ring gages.With this kind of gage,the histories of pressure and radial displacement can be measured simultaneously at different Lagrange positions in an axisymmetric shock loading flow field. The technique has some advantages over the 1-D one,such as,simplified loading device,continuously adjust- able output pressure,no restriction on sample length and the availability for the study of lateral rarefaction in shock propogation.As a preliminary application,the processes of 2-D shock initiation and attenuation in compacted TNT are measured.

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

In this study,the anti-penetration performance of polyurea/ASTM1405-steel composite plate subjected to high velocity projectile was analyzed.Two kinds of modified polyurea material(AMMT-053 and AMMT-055)were selected and a ballistic impact testing system including speed measuring target system and high-speed camera was designed.This experiment was conducted with a rifle and 5.8 mm projectile to explore the effects by the polyurea coating thickness,the polyurea coating position and the glass-fiber cloth on the anti-penetration performance of polyurea/ASTM1405-steel composite plate.The result showed that the effects of polyurea coating position were different between two types of polyurea,and that the effects of glass-fiber position were disparate between two types of polyurea as well.For AMMT-053 polyurea material,it was better to be on front face than on rear face;whereas for AMMT-055 polyurea,it was better to be on rear surface although the difference was very subtle.Additionally,formulas had been given to describe the relationship between the effectiveness of polyurea and the thickness of polyurea coating.In general,AMMT-055 had better anti-penetration performance than AMMT-053.Furthermore,five typical damage modes including self-healing,crack,local bulge,spallation and local fragmentation were defined and the failure mechanism was analyzed with the results of SHPB test.Additionally,the bonding strength played an important role in the anti-penetration performance of polyurea/steel composite plate.

Performance study of jute-epoxy composites/sandwiches under normal ballistic impact

This study is undertaken to explore the use of natural fiber Jute-epoxy(JE),Jute-epoxy-rubber(JRE)sandwich composite for ballistic energy absorption.Energy absorbed and residual velocities for these composites are evaluated analytically and through Finite Element Analysis(FEA).FE analysis of JE plates is carried out for different thicknesses(3,5,10 and 15 mm).JE plates and JRE sandwiches having the same thickness(15 mm) are fabricated and tested to measure residual velocity and energy absorbed.The analytical results are found to agree well with the results of FE analysis with a maximum error of 9%.The study on JE composite plate reveals that thickness influences the energy absorption.Experimental and FE analysis study showed that JRE sandwiches have better energy absorption than JE plates.Energy absorption of a JRE sandwich is about 71% greater than JE plates.Damages obtained from FEA and testing are in good agreement,SEM analysis confirms composites failed by fiber rupture and fragmentation.

High velocity impact of metal sphere on thin metallic plate using smooth particle hydrodynamics(SPH)method

The modeling of high velocity impact is an important topic in impact engineering.Due to various constraints,experimental data are extremely limited.Therefore,detailed numerical simulation can be considered as a desirable alternative.However,the physical processes involved in the impact are very sophisticated;hence a practical and complete reproduction of the phenomena involves complicated numerical models.In this paper,we present a smoothed particle hydrodynamics(SPH)method to model two-dimensional impact of metal sphere on thin metallic plate.The simulations are applied to different materials(Aluminum,Lead and Steel);however the target and projectile are formed of similar metals.A wide range of velocities(300,1000,2000,and 3100 m/s)are considered in this study.The goal is to study the most sensitive input parameters(impact velocity and plate thickness)on the longitudinal extension of the projectile,penetration depth and damage crater.

Numerical modeling of high velocity impact applied to reinforced concrete panel

A numerical simulation of a high-velocity impact of reinforced concrete structures is a complex problem for which robust numerical models are required to predict the behavior of the experimental tests.This paper presents the implementation of a numerical model to predict the impact behavior of a reinforced concrete panel penetrated by a rigid ogive-nosed steel projectile.The concrete panel has dimensions of 675 mm675 mm200 mm,and is meshed using 8-node hexahedron solid elements.The behavior of the concrete panel is modeled using a Johnson-Holmquist damage model incorporating both the damage and residual material strength.The steel projectile has a small mass and a length of 152 mm,and is modeled as a rigid element.Damage and pressure contours are applied,and the kinetic and internal energies of the concrete and projectile are evaluated.We also evaluate the velocity at different points of the steel projectile and the concrete panel under an impact velocity of 540 m/s.

A review of high‐velocity impact on fiber‐reinforced textile composites: Potential for aero engine applications

Considerable research has indicated that fiber‐reinforced textile composites are significantly beneficial to the aerospace industry,especially aero engines,due to their high specific strength,specific stiffness,corrosion resistance,and fatigue re-sistance.However,damage caused by high‐velocity impacts is a critical limitation factor in a wide range of applications.This paper presents an overview of the development,material characterizations,and applications of fiber‐reinforced textile composites for aero engines.These textile composites are classified into four ca-tegories including two‐dimensional(2D)woven composites,2D braided composites,3D woven composites,and 3D braided composites.The complex damage me-chanisms of these composite materials due to high‐velocity impacts are discussed in detail as well.

MECHANISM OF WAVE FORMATION AT THE INTERFACE IN EXPLOSIVE WELDING

Some of the main progress on the investigation of the mechanism of the wave formation in explosive welding at the Institute of Mechanics is summarized and otters'previous works are re- viewed.Our systematic experiments and analysis do not substantiate the theory of wave formation based on Karman vortex-street analogy or Helmholtz instability.On the contrary,they show that materi- al strength insensitive to strain rate plays an important role.A simple hydro-plastic model is presented to explain the main features regarding the interracial wave formation and to estimate the magnitude of wave length.The result is in broad agreement with experiment.