A concept of potential crosslinking agent was introduced into the synthesizing process of highly oil-absorptive resin that is traditionally prepared by single chemical crosslinking.The resin was heated after manufactu...A concept of potential crosslinking agent was introduced into the synthesizing process of highly oil-absorptive resin that is traditionally prepared by single chemical crosslinking.The resin was heated after manufactured to obtain three-dimension network structure.The effects of potential crosslinking agent and the crosslinking conditions on the absorptive properties of resin were studied.The results showed that hydroxyl ethylacrylate got satisfied results,and the resin with it had good oil absorbency and oil retention.展开更多
A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA),2-Ethylhexyl methacrylate(EHMA),and styrene(St)as monomers.Response su...A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA),2-Ethylhexyl methacrylate(EHMA),and styrene(St)as monomers.Response surface methodology(RSM)with central composite design(CCD)was also applied to determine the optimal parameters that are mainly known to affect their synthesis.Thus,the effects of the monomer mass ratio(EHMA:SMA),the rigid monomer(St)dosage,the porous agent(acetone)dosage,and their pairwise interaction on the resin's oil-absorption capacity were analyzed,highlighting PSES-R_(2) as the resin with the optimum performance.The pure oil-absorption rates of PSES-R_(2) for gasoline,diesel,and kerosene were 11.19 g·g^(-1),16.25 g·g^(-1),and 14.84 g·g^(-1),respectively,while the oil removal rates from oily wastewater were 98.82%,65.11%,and 99.63%,respectively.展开更多
In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining t...In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining the property of adsorbent on VOCs in a highly humid gas stream is a serious industrial problem. In this study, the adsorption/desorption behavior of toluene in a micro-mesoporous polymeric resin was investigated in a highly humid environment to explore the influence of abound water vapor on resin adsorption and regeneration. This resin could selectively adsorb toluene at an RH of 80%, and its adsorption property was unaffected by the presence of water vapor. In the case of humidity saturation, the resin displayed a high adsorption capacity at a moisture content of <30%. Therefore, the polymer resin is an excellent water-resistant adsorbent of VOCs. In the regenerative experiment, the resin maintained its original adsorption capability after four adsorption/ desorption cycles of toluene purging with nitrogen gas at 120℃. The resin exhibited excellent regeneration performance at high humidity.展开更多
High temperature compressive strength is one of the most important performances of resin sand; its value directly concerns the quality of castings. In order to seek the best testing method of resin sand high temperatu...High temperature compressive strength is one of the most important performances of resin sand; its value directly concerns the quality of castings. In order to seek the best testing method of resin sand high temperature compressive strength, a self-developed instrument was used to carry out experiments, and the sample shape and size were designed and studied. The results show that a hollow cylinder sample can reflect the strength difference of different resin sands better than a solid cylinder sample, and its data is stable. The experiments selected φ20/5×30 mm as the size of the hollow cylinder samples. The high temperature compressive strengths of phenol-formaldehyde resin coated sand, furan resin self-setting sand, and TEA resin sand were each tested. For the resin sand used for cast steel and cast iron, 1,000 ℃ was selected as the test temperature; for the resin sand used for cast non-ferrous alloy, 800 ℃ was selected as the test temperature; and for all the resin sand samples, 1 min was selected as the holding time. This testing method can truthfully reflect the high temperature performance of three kinds of resin sand; it is reproducible, and the variation coefficients of test values are under 10%.展开更多
This article describes a new method for the simultaneous determination of trace rare earth elements (REEs) and non rare earth elements (NREEs) in high purity terbium oxide by ICP-AES after HPLC separation using P507 r...This article describes a new method for the simultaneous determination of trace rare earth elements (REEs) and non rare earth elements (NREEs) in high purity terbium oxide by ICP-AES after HPLC separation using P507 resin. The chromatographic separation of the analytes from the matrix using dilute nitric acid as mobile phase was studied. The experimental results showed that a favorable separation of trace metals (Cu and Gd) from the matrix (Tb) can easily be achieved by elution with dilute nitric acid within 25 min. The proposed method was applied to the determination of trace metals (Ca, Cu, Mg, Mn, Ni, Si, La, Ce, Pr, Nd, Sm, Eu and Gd) in high purity terbium oxide. The detection limits (DLs) for the analytes ranged from 0.4-4.0 μg\5g -1, and the recoveries are from 78%-105%.展开更多
Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin(C9PR) quality. In this study, the Ni2P/SiO2(containing 10% of Ni) catalyst prepared by the temperature-programmed reductio...Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin(C9PR) quality. In this study, the Ni2P/SiO2(containing 10% of Ni) catalyst prepared by the temperature-programmed reduction(TPR) method was used for hydrogenation of C9 petroleum resins. The effect of reaction conditions on catalytic performance was studied, and the results showed that the optimum reaction temperature, pressure and liquid hourly space velocity(LHSV) was 250 ℃, 6.0 MPa, and 1.0 h-1, respectively. The bromine numbers of hydrogenated products were maintained at low values(250 mg Br/100g) within 300h, showing the high activity and stability of Ni2P/SiO2 catalyst. The fresh and spent catalysts were characterized by X-ray diffraction(XRD), BET surface area(BET) analysis, scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared(FTIR) pyridine adsorption, and X-ray photoelectron spectroscopy(XPS). Compared with the traditional sulfurated-Ni W catalysts, Ni2P possessed globe-like structure instead of layered structure like the active phase of Ni WS, thereof exposing more active sites, which were responsible for the high activity of Ni2P/SiO2 catalyst. The stability of Ni2P/SiO2 catalyst was probably attributed to its high sulfur tolerance, antisintering, anti-coking and carbon-resistance ability. These properties might be further ascribed to the special Ni-P-S surface phase, high thermal stability of Ni2P nanoparticles and weak surface acidity for the Ni2P/SiO2 catalyst.展开更多
A novel solid phase organic synthesis resin was synthesized for combinatorial high-throughput screening,which based on FTIR spectra self-encoding functional resin technology. A new deconvolution strategy termed positi...A novel solid phase organic synthesis resin was synthesized for combinatorial high-throughput screening,which based on FTIR spectra self-encoding functional resin technology. A new deconvolution strategy termed position encoding deconvolution had illustrated and was compared with some popular combinatorial deconvolution strategies in efficiency and information content. The mimic high throughput screening of hexapeptide library successfully proved the applying of the self-encoding functional resin technology and the position encoding deconvolution strategy.展开更多
High pressure method was ased for the first time to produce rectorite clay (REC)/phenolic resin (PF) and organic rectorite clay (OREC) /phenolic resin and montmorillonite( MMT)lphenolic resin (PF) nanocompos...High pressure method was ased for the first time to produce rectorite clay (REC)/phenolic resin (PF) and organic rectorite clay (OREC) /phenolic resin and montmorillonite( MMT)lphenolic resin (PF) nanocomposites. The structure of the material phase was studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared ( FT- IR ) spectroscopy, thermogravimetric analysis ( TGA ), and atomic force microscopg" (AFM). The experimental results show that intercalated clay/resin nanocomposites could form under normal temperature and high pressure conditions by the intercalation of polymeric molecules rather than interlayer polymerization.展开更多
The mechanical properties of resin-bonded sand mixtures at high temperatures significantly affect the quality of casting. However, the existing instruments for high-temperature performances testing mainly focus on ino...The mechanical properties of resin-bonded sand mixtures at high temperatures significantly affect the quality of casting. However, the existing instruments for high-temperature performances testing mainly focus on inorganic binder-bonded sands no matter the test items or the atmospheric protection, while the instrumentss specially designed for resin-bonded sand are not yet available. A new instrument for testing the hightemperature performance of resin sand was designed including the confirmation of the testing parameters, loading, measurement and control systems, and the design of the frame shape and heating furnace. This instrument can test the compressive strength, heat tolerance time and restraining load of phenol-formaldehyde resin coated sand, self-hardened furan resin sand, and trimethylamine(TEA)-based resin bonded sand at high temperatures. The developed instrument has a high accuracy offering smaller than 0.3% deviation at a full scale in the measurement of the high temperature compressive strength and the restraining load over the range of 0-6.8 MPa and 0-2,000 N, respectively. The high temperature heat tolerance time range is 0-300 s and its measurement accuracy is ±1 s.展开更多
Basic properties of a silica-based octyl(phenyl)-N,N-diisobutylcarbamoyl-methylphosphine oxide (CMPO) extraction resin (CMPO/SiO2-P) was investigated.Adsorption behavior for some rare earth elements (RE) which are con...Basic properties of a silica-based octyl(phenyl)-N,N-diisobutylcarbamoyl-methylphosphine oxide (CMPO) extraction resin (CMPO/SiO2-P) was investigated.Adsorption behavior for some rare earth elements (RE) which are constituents of high level liquid waste (HLLW) and the long-term stability of the extraction resin in nitric acid solution were examined.The CMPO extraction resin was significantly stable in 3 mol·L?1 HNO3 solution at 50oC.Furthermore,the RE(III) were efficiently separated from non-adsorptive fission product (FP) elements such as Sr(II) in a column experiment using a highly nitric acid solution.The separation behaviors of the elements are considered to result from the difference in their adsorption and elution selectivity based on the complex formation with CMPO.There was no strong dependency of RE(III) separation efficiency on feed solution flow rate.Only from the perspectives of the acid-resistant behavior of CMPO extraction resin and the elution kinetics for the metal ions with the extraction resin,the CMPO extraction resin can be used in the modified MAREC process for HLLW partitioning.展开更多
文摘A concept of potential crosslinking agent was introduced into the synthesizing process of highly oil-absorptive resin that is traditionally prepared by single chemical crosslinking.The resin was heated after manufactured to obtain three-dimension network structure.The effects of potential crosslinking agent and the crosslinking conditions on the absorptive properties of resin were studied.The results showed that hydroxyl ethylacrylate got satisfied results,and the resin with it had good oil absorbency and oil retention.
基金This work was funded by Project of Construction of Innovative Teams and Teacher Career Development for Universities and Colleges under Beijing Municipality(IDHT20180508)Scientific Research Common Program of Beijing Municipal Commission of Education(KM202010017006)+2 种基金the Talents Project of Beijing Organization Department(2018000020124G091)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA21021101)the National Key Research and Development Program of China(2019YFA0705803).
文摘A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA),2-Ethylhexyl methacrylate(EHMA),and styrene(St)as monomers.Response surface methodology(RSM)with central composite design(CCD)was also applied to determine the optimal parameters that are mainly known to affect their synthesis.Thus,the effects of the monomer mass ratio(EHMA:SMA),the rigid monomer(St)dosage,the porous agent(acetone)dosage,and their pairwise interaction on the resin's oil-absorption capacity were analyzed,highlighting PSES-R_(2) as the resin with the optimum performance.The pure oil-absorption rates of PSES-R_(2) for gasoline,diesel,and kerosene were 11.19 g·g^(-1),16.25 g·g^(-1),and 14.84 g·g^(-1),respectively,while the oil removal rates from oily wastewater were 98.82%,65.11%,and 99.63%,respectively.
文摘In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining the property of adsorbent on VOCs in a highly humid gas stream is a serious industrial problem. In this study, the adsorption/desorption behavior of toluene in a micro-mesoporous polymeric resin was investigated in a highly humid environment to explore the influence of abound water vapor on resin adsorption and regeneration. This resin could selectively adsorb toluene at an RH of 80%, and its adsorption property was unaffected by the presence of water vapor. In the case of humidity saturation, the resin displayed a high adsorption capacity at a moisture content of <30%. Therefore, the polymer resin is an excellent water-resistant adsorbent of VOCs. In the regenerative experiment, the resin maintained its original adsorption capability after four adsorption/ desorption cycles of toluene purging with nitrogen gas at 120℃. The resin exhibited excellent regeneration performance at high humidity.
基金financially supported by the National Natural Science Foundation of China(No.51405002)
文摘High temperature compressive strength is one of the most important performances of resin sand; its value directly concerns the quality of castings. In order to seek the best testing method of resin sand high temperature compressive strength, a self-developed instrument was used to carry out experiments, and the sample shape and size were designed and studied. The results show that a hollow cylinder sample can reflect the strength difference of different resin sands better than a solid cylinder sample, and its data is stable. The experiments selected φ20/5×30 mm as the size of the hollow cylinder samples. The high temperature compressive strengths of phenol-formaldehyde resin coated sand, furan resin self-setting sand, and TEA resin sand were each tested. For the resin sand used for cast steel and cast iron, 1,000 ℃ was selected as the test temperature; for the resin sand used for cast non-ferrous alloy, 800 ℃ was selected as the test temperature; and for all the resin sand samples, 1 min was selected as the holding time. This testing method can truthfully reflect the high temperature performance of three kinds of resin sand; it is reproducible, and the variation coefficients of test values are under 10%.
基金SupportedbytheNationalScienceFoundationofChina (No .2 0 0 0 70 10 10 8)andWuhanMunicipalScience&TechnologyCommission (No .995 0 0 40 80 )
文摘This article describes a new method for the simultaneous determination of trace rare earth elements (REEs) and non rare earth elements (NREEs) in high purity terbium oxide by ICP-AES after HPLC separation using P507 resin. The chromatographic separation of the analytes from the matrix using dilute nitric acid as mobile phase was studied. The experimental results showed that a favorable separation of trace metals (Cu and Gd) from the matrix (Tb) can easily be achieved by elution with dilute nitric acid within 25 min. The proposed method was applied to the determination of trace metals (Ca, Cu, Mg, Mn, Ni, Si, La, Ce, Pr, Nd, Sm, Eu and Gd) in high purity terbium oxide. The detection limits (DLs) for the analytes ranged from 0.4-4.0 μg\5g -1, and the recoveries are from 78%-105%.
基金financially supported by the Scientific Research Fund of Zhejiang Provincial Education Department (Y201225114)the Natural Science Foundation of Zhejiang Province (LY13B030006)
文摘Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin(C9PR) quality. In this study, the Ni2P/SiO2(containing 10% of Ni) catalyst prepared by the temperature-programmed reduction(TPR) method was used for hydrogenation of C9 petroleum resins. The effect of reaction conditions on catalytic performance was studied, and the results showed that the optimum reaction temperature, pressure and liquid hourly space velocity(LHSV) was 250 ℃, 6.0 MPa, and 1.0 h-1, respectively. The bromine numbers of hydrogenated products were maintained at low values(250 mg Br/100g) within 300h, showing the high activity and stability of Ni2P/SiO2 catalyst. The fresh and spent catalysts were characterized by X-ray diffraction(XRD), BET surface area(BET) analysis, scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared(FTIR) pyridine adsorption, and X-ray photoelectron spectroscopy(XPS). Compared with the traditional sulfurated-Ni W catalysts, Ni2P possessed globe-like structure instead of layered structure like the active phase of Ni WS, thereof exposing more active sites, which were responsible for the high activity of Ni2P/SiO2 catalyst. The stability of Ni2P/SiO2 catalyst was probably attributed to its high sulfur tolerance, antisintering, anti-coking and carbon-resistance ability. These properties might be further ascribed to the special Ni-P-S surface phase, high thermal stability of Ni2P nanoparticles and weak surface acidity for the Ni2P/SiO2 catalyst.
文摘A novel solid phase organic synthesis resin was synthesized for combinatorial high-throughput screening,which based on FTIR spectra self-encoding functional resin technology. A new deconvolution strategy termed position encoding deconvolution had illustrated and was compared with some popular combinatorial deconvolution strategies in efficiency and information content. The mimic high throughput screening of hexapeptide library successfully proved the applying of the self-encoding functional resin technology and the position encoding deconvolution strategy.
基金Funded by Key Scientific and Technological Research Project ofHubei Province (No.2004AA101C23) and Key Scientific and Tech-nological Research Project of Ministry of Education of China (No.02052)
文摘High pressure method was ased for the first time to produce rectorite clay (REC)/phenolic resin (PF) and organic rectorite clay (OREC) /phenolic resin and montmorillonite( MMT)lphenolic resin (PF) nanocomposites. The structure of the material phase was studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared ( FT- IR ) spectroscopy, thermogravimetric analysis ( TGA ), and atomic force microscopg" (AFM). The experimental results show that intercalated clay/resin nanocomposites could form under normal temperature and high pressure conditions by the intercalation of polymeric molecules rather than interlayer polymerization.
文摘The mechanical properties of resin-bonded sand mixtures at high temperatures significantly affect the quality of casting. However, the existing instruments for high-temperature performances testing mainly focus on inorganic binder-bonded sands no matter the test items or the atmospheric protection, while the instrumentss specially designed for resin-bonded sand are not yet available. A new instrument for testing the hightemperature performance of resin sand was designed including the confirmation of the testing parameters, loading, measurement and control systems, and the design of the frame shape and heating furnace. This instrument can test the compressive strength, heat tolerance time and restraining load of phenol-formaldehyde resin coated sand, self-hardened furan resin sand, and trimethylamine(TEA)-based resin bonded sand at high temperatures. The developed instrument has a high accuracy offering smaller than 0.3% deviation at a full scale in the measurement of the high temperature compressive strength and the restraining load over the range of 0-6.8 MPa and 0-2,000 N, respectively. The high temperature heat tolerance time range is 0-300 s and its measurement accuracy is ±1 s.
文摘Basic properties of a silica-based octyl(phenyl)-N,N-diisobutylcarbamoyl-methylphosphine oxide (CMPO) extraction resin (CMPO/SiO2-P) was investigated.Adsorption behavior for some rare earth elements (RE) which are constituents of high level liquid waste (HLLW) and the long-term stability of the extraction resin in nitric acid solution were examined.The CMPO extraction resin was significantly stable in 3 mol·L?1 HNO3 solution at 50oC.Furthermore,the RE(III) were efficiently separated from non-adsorptive fission product (FP) elements such as Sr(II) in a column experiment using a highly nitric acid solution.The separation behaviors of the elements are considered to result from the difference in their adsorption and elution selectivity based on the complex formation with CMPO.There was no strong dependency of RE(III) separation efficiency on feed solution flow rate.Only from the perspectives of the acid-resistant behavior of CMPO extraction resin and the elution kinetics for the metal ions with the extraction resin,the CMPO extraction resin can be used in the modified MAREC process for HLLW partitioning.