It is very important to predict the coupling between the cavity and the high power input source in the coupler design. In this paper, a time domain method is used to calculate the external quality factor Qext for the ...It is very important to predict the coupling between the cavity and the high power input source in the coupler design. In this paper, a time domain method is used to calculate the external quality factor Qext for the BEPC Ⅱ superconducting cavity. A comparison between simulation results and experimental results is presented. The results of simulation and measurement of Qext have a good agreement within an error of 10%. The geometry parameters related with Qext are also studied.展开更多
High power conditioning of the input coupler for BEPCII superconducting cavity has been performed. After room temperature conditioning, the RF power of 150 kW with continuous wave at standing wave mode passed through ...High power conditioning of the input coupler for BEPCII superconducting cavity has been performed. After room temperature conditioning, the RF power of 150 kW with continuous wave at standing wave mode passed through the coupler without any problem. Meanwhile, a series of methods have also been studied to improve the performance of the coupler during the beam operation. Up to now, the input coupler can feed a RF power up to 100 kW stably with high current of 250 mA at 2.5 GeV.展开更多
The BEPCII storage ring adopts two 500 MHz superconducting cavities （SCC）. Each one is equipped with a 500 MHz input power coupler. The coupler is to feed 150 kW power in continuous wave （CW） mode with both standi...The BEPCII storage ring adopts two 500 MHz superconducting cavities （SCC）. Each one is equipped with a 500 MHz input power coupler. The coupler is to feed 150 kW power in continuous wave （CW） mode with both standing and traveling wave modes. Due to high power feeding and high frequency of the coupler, its fabrication is a big challenge. The fabrication started with two key components, the window and the antenna. Up to now, two sets including windows and antennas have been made by IHEP. And a 270 kW RF power in CW has passed through the coupler during the high power test. The fabrication details are presented in this paper.展开更多
5-cell elliptical cavities have been selected for the main linac of the China Accelerator Driven subcritical System （C-ADS） in the medium energy section. According to the design, each cavity should be driven with ra...5-cell elliptical cavities have been selected for the main linac of the China Accelerator Driven subcritical System （C-ADS） in the medium energy section. According to the design, each cavity should be driven with radio frequency （RF） energy up to 150 kW by a fundamental power coupler （FPC）. As the cavities work with high quality factor and high accelerating gradient, the coupler should keep the cavity from contamination in the assembly procedure. To fulfil the requirements, a single-window coaxial type coupler was designed with the capabilities of handling high RF power, class 10 clean room assembly, and heat load control. This paper presents the coupler design and gives details of RF design, heat load optimization and thermal analysis as well as multipacting simulations. In addition, a primary high power test has been performed and is described in this paper.展开更多
The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC and future XFEL and ERL projects in China. With the aim to develop 1.3 GHz SRF technology, IHEP has started a pro...The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC and future XFEL and ERL projects in China. With the aim to develop 1.3 GHz SRF technology, IHEP has started a program to build an SRF Accelerating Unit. This unit contains a 9-cell 1.3 GHz superconducting cavity, a short cryomodule, a high power input coupler, a tuner and a low level RF system. This program also includes the SRF laboratory upgrade, which will permit the unit to be built and tested at IHEP. The unit will be used for the 1.3 GHz SRF system integration study, high power horizontal test and possible beam test in the future. In this paper, we report the recent R&D status of this program. The first large grain low-loss shape 9-cell superconducting RF cavity made by IHEP reached 20 MV/m in the first vertical test in July, 2010. The prototype tuner and low level RF (LLRF) system are under test. The high power input coupler and cryomodule are under fabrication. Several key SRF facilities for 9-cell cavity surface treatment and pre-tuning were successfully commissioned and are in operation.展开更多
基金Supported by National Natural Science Foundation of China(k711360503)
文摘It is very important to predict the coupling between the cavity and the high power input source in the coupler design. In this paper, a time domain method is used to calculate the external quality factor Qext for the BEPC Ⅱ superconducting cavity. A comparison between simulation results and experimental results is presented. The results of simulation and measurement of Qext have a good agreement within an error of 10%. The geometry parameters related with Qext are also studied.
基金National Natural Science Foundation of China (k711360503)
文摘High power conditioning of the input coupler for BEPCII superconducting cavity has been performed. After room temperature conditioning, the RF power of 150 kW with continuous wave at standing wave mode passed through the coupler without any problem. Meanwhile, a series of methods have also been studied to improve the performance of the coupler during the beam operation. Up to now, the input coupler can feed a RF power up to 100 kW stably with high current of 250 mA at 2.5 GeV.
基金Supported by National Natural Science Foundation of China (k711360503)
文摘The BEPCII storage ring adopts two 500 MHz superconducting cavities （SCC）. Each one is equipped with a 500 MHz input power coupler. The coupler is to feed 150 kW power in continuous wave （CW） mode with both standing and traveling wave modes. Due to high power feeding and high frequency of the coupler, its fabrication is a big challenge. The fabrication started with two key components, the window and the antenna. Up to now, two sets including windows and antennas have been made by IHEP. And a 270 kW RF power in CW has passed through the coupler during the high power test. The fabrication details are presented in this paper.
基金Supported by China ADS Project(XDA03020000)National Natural Science Foundation of China(11475203)
文摘5-cell elliptical cavities have been selected for the main linac of the China Accelerator Driven subcritical System （C-ADS） in the medium energy section. According to the design, each cavity should be driven with radio frequency （RF） energy up to 150 kW by a fundamental power coupler （FPC）. As the cavities work with high quality factor and high accelerating gradient, the coupler should keep the cavity from contamination in the assembly procedure. To fulfil the requirements, a single-window coaxial type coupler was designed with the capabilities of handling high RF power, class 10 clean room assembly, and heat load control. This paper presents the coupler design and gives details of RF design, heat load optimization and thermal analysis as well as multipacting simulations. In addition, a primary high power test has been performed and is described in this paper.
文摘The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC and future XFEL and ERL projects in China. With the aim to develop 1.3 GHz SRF technology, IHEP has started a program to build an SRF Accelerating Unit. This unit contains a 9-cell 1.3 GHz superconducting cavity, a short cryomodule, a high power input coupler, a tuner and a low level RF system. This program also includes the SRF laboratory upgrade, which will permit the unit to be built and tested at IHEP. The unit will be used for the 1.3 GHz SRF system integration study, high power horizontal test and possible beam test in the future. In this paper, we report the recent R&D status of this program. The first large grain low-loss shape 9-cell superconducting RF cavity made by IHEP reached 20 MV/m in the first vertical test in July, 2010. The prototype tuner and low level RF (LLRF) system are under test. The high power input coupler and cryomodule are under fabrication. Several key SRF facilities for 9-cell cavity surface treatment and pre-tuning were successfully commissioned and are in operation.
