A salt-induced tackifying polymer for enhancing oil recovery in highsalinity reservoirs:Synthesis,evaluation,and mechanism

Polymerflooding is an effective method widely applied for enhancing oil recovery(EOR)by reducing the mobility ratio between theinjected water and crude oil.However,traditional polymers encounter challenges in high salinity reservoirs due to their salt sensitivity.Toovercome this challenge,we synthesized a zwitterion polymer(PAMNS)with salt-induced tackifying property through copolymerization ofacrylamide and a zwitterion monomer,methylacrylamide propyl-N,N-dimethylbutylsulfonate(NS).NS monomer is obtained from thereaction between 1,4-butanesultone and dimethylamino propyl methylacrylamide.In this study,the rheological properties,salt responsiveness,and EOR efficiency of PAMNS were evaluated.Results demonstrate that PAMNS exhibits desirable salt-induced tackifyingcharacteristics,with viscosity increasing up to 2.4 times as the NaCl concentration reaches a salinity of 30×10^(4)mg L^(-1).Furthermore,highvalence ions possess a much stronger effect on enhancing viscosity,manifested as Mg^(2+)>Ca^(2+)>Na^(+).Molecular dynamics simulations(MD)andfluid dynamics experiment results demonstrate that PAMNS molecules exhibit a more stretched state and enhanced intermolecularassociations in high-salinity environments.It is because of the salt-induced tackifying,PAMNS demonstrates superior performance inpolymerflooding experiments under salinity ranges from 5×10^(4)mg L^(-1)to 20×10^(4)mg L^(-1),leading to 10.38–19.83%higher EOR thantraditional polymers.

Genetic mechanism and main controlling factors of high-quality clastic rock reservoirs in deep and ultradeep layers:A case study of Oligocene Linhe Formation in Linhe Depression,Hetao Basin,NW China

Based on new data from cores,drilling and logging,combined with extensive rock and mineral testing analysis,a systematic analysis is conducted on the characteristics,diagenesis types,genesis and controlling factors of deep to ultra-deep abnormally high porosity clastic rock reservoirs in the Oligocene Linhe Formation in the Hetao Basin.The reservoir space of the deep to ultra-deep clastic rock reservoirs in the Linhe Formation is mainly primary pores,and the coupling of three favorable diagenetic elements,namely the rock fabric with strong compaction resistance,weak thermal compaction diagenetic dynamic field,and diagenetic environment with weak fluid compaction-weak cementation,is conducive to the preservation of primary pores.The Linhe Formation clastic rocks have a superior preexisting material composition,with an average total content of 90%for quartz,feldspar,and rigid rock fragments,and strong resistance to compaction.The geothermal gradient in Linhe Depression in the range of(2.0–2.6)°C/100 m is low,and together with the burial history of long-term shallow burial and late rapid deep burial,it forms a weak thermal compaction diagenetic dynamic field environment.The diagenetic environment of the saline lake basin is characterized by weak fluid compaction.At the same time,the paleosalinity has zoning characteristics,and weak cementation in low salinity areas is conducive to the preservation of primary pores.The hydrodynamic conditions of sedimentation,salinity differentiation of ancient water in saline lake basins,and sand body thickness jointly control the distribution of high-quality reservoirs in the Linhe Formation.

Investigation of Electrical Parameters of Fresh Water and Produced Mixed Injection in High-Salinity Reservoirs

Assuming a reservoir with a typical salt-lake background in the Qaidam Basin as a testbed,in this study the var-iation law of the rock electrical parameters has been determined through water displacement experiments with different salinities.As made evident by the results,the saturation index increases with the degree of water injec-tion.When the salinity of the injected water is lower than 80000 ppm,the resistivity of the rock samplefirst decreases,then it remains almost constant in an intermediate stage,andfinally it grows,thereby giving rise to a‘U’profile behavior.As the salinity decreases,the water saturation corresponding to the inflection point of the resistivity becomes lower,thereby leading to a wider‘U’type range and a higher terminal resistivity.For dif-ferent samples,higher initial resistivity of the sample in the oil-bearing state,and higher resistivity after low-sali-nity water washing are obtained when a thicker lithology is considered.

Rate transient analysis methods for water-producing gas wells in tight reservoirs with mobile water

Tight gas reservoirs with mobile water exhibit multi-phase flow and high stress sensitivity.Accurately analyzing the reservoir and well parameters using conventional single-phase rate transient analysis methods proves challenging.This study introduces novel rate transient analysis methods incorporating evaluation processes based on the conventional flowing material balance method and the Blasingame type-curve method to examine fractured gas wells producing water.By positing a gas-water two-phase equivalent homogenous phase that considers characteristics of mobile water,gas,and high stress sensitivity,the conventional single-phase rate transient analysis methods can be applied by integrating the phase's characteristics and defining the phase's normalized parameters and material balance pseudotime.The rate transient analysis methods based on the equivalent homogenous phase can be used to quantitatively assess the parameters of wells and gas reservoirs,such as original gas-in-place,fracture half-length,reservoir permeability,and well drainage radius.This facilitates the analysis of production dynamics of fractured wells and well-controlled areas,subsequently aiding in locating residual gas and guiding the configuration of well patterns.The specific evaluation processes are detailed.Additionally,a numerical simulation mechanism model was constructed to verify the reliability of the developed methods.The methods introduced have been successfully implemented in field water-producing gas wells within tight gas reservoirs containing mobile water.

Diagenetic Evolution and Formation Mechanisms of High-Quality Reservoirs under Multiple Diagenetic Environmental Constraints:An Example from the Paleogene Beach-Bar Sandstone Reservoirs in the Dongying Depression,Bohai Bay Basin

The diagenetic environment, diagenetic responses, diagenetic transformation model and formation mechanisms of high-quality reservoirs（beach-bar sandstones of the Paleogene fourth member） in the Dongying depression were studied through the analysis of fluid inclusions, thin section and burial evolution history. The diagenetic fluids of the beach-bar sandstone reservoirs evolved from early high salinity and weak alkalinity to low salinity and strong acidity, late high salinity and strong alkalinity and late low salinity and acidity, which were accompanied by two stages of oil and gas filling. The fluids at the margins of the sandbodies were continuously highly saline and strongly alkaline. The western（eastern） reservoirs experienced early open（closed）, middle open, and late closed diagenetic environments during their burial history. The flow pattern was characterized by upwelling during the majority of the diagenesis（in the east, a non-circulating pattern transitioned into an upwelling current）. Due to the evolution of the diagenetic fluids, the diagenetic sequence of the beach-bar reservoirs was as follows： early weak carbonate cementation; feldspar and carbonate cement dissolution and authigenic quartz cementation; late carbonate and anhydrite cementation, authigenic feldspar cementation, and late quartz dissolution; and late carbonate cementation, feldspar dissolution, and authigenic quartz cementation. The diagenetic strength during these stages varied or was absent altogether in different parts of the reservoirs. Due to the closeness of the diagenetic environment and the flow pattern of the diagenetic fluids, the diagenetic products are variably distributed in the sandstones interbedded with mudstones and in the fault blocks. The evolution of multiple alternating alkaline and acidic diagenetic environments controlled the distribution patterns of the reservoir diagenesis and reservoir space, and the reservoir quality index, RQI, increased gradually from the margins to the centers of the sandstones. The closeness of the diagenetic environment and the flow patterns of the diagenetic fluids controlled the differences in the reservoir properties among the fault blocks. With increasing distance from the oil-source faults, the RQI values in the west gradually decreased and in the east initially increased and then decreased.

Geochemical characteristics and genetic mechanism of the high-N2 shale gas reservoir in the Longmaxi Formation, Dianqianbei Area, China

As an important pilot target for shale gas exploration and development in China,the Longmaxi Formation shale in the Dianqianbei Area is characterized by high content of nitrogen,which severely increases exploration risk.Accordingly,this study explores the genesis of shale gas reservoir and the mechanism of nitrogen enrichment through investigating shale gas compositions,isotope features,and geochemical characteristics of associated gases.The high-nitrogen shale gas reservoir in the Longmaxi Formation is demonstrated to be a typical dry gas reservoir.Specifically,the alkane carbon isotope reversal is ascribed to the secondary cracking of crude oil and the Rayleigh fractionation induced by the basalt mantle plume.Such a thermogenic oil-type gas reservoir is composed of both oil-cracking gas and kerogen-cracking gas.The normally high nitrogen content(18.05%-40.92%) is attributed to organic matter cracking and thermal ammoniation in the high-maturity stage.Specifically,the high heat flow effect of the Emeishan mantle plume exacerbates the thermal cracking of organic matter in the Longmaxi Formation shale,accompanied by nitrogen generation.In comparison,the abnormally high nitrogen content(86.79%-98.54%) is ascribed to the communication between the atmosphere and deep underground fluids by deep faults,which results in hydrocarbon loss and nitrogen intrusion,acting as the key factor for deconstruction of the primary shale gas reservoir.Results of this study not only enrich research on genetic mechanism of high-maturity N_@ shale gas reservoirs,but also provide theoretical guidance for subsequent gas reservoir resource evaluation and well-drilling deployment in this area.

Layer regrouping for water-flooded commingled reservoirs at a high water-cut stage

Layer regrouping is to divide all the layers into several sets of production series according to the physical properties and recovery percent of layers at high water-cut stage, which is an important technique to improve oil recovery for high water-cut multilayered reservoirs. Dif- ferent regroup scenarios may lead to different production performances. Based on unstable oil-water flow theory, a multilayer commingled reservoir simulator is established by modifying the production split method. Taking into account the differences of layer properties, including per- meability, oil viscosity, and remaining oil saturation, the pseudo flow resistance contrast is proposed to serve as a characteristic index of layer regrouping for high water-cut multilayered reservoirs. The production indices of multi- layered reservoirs with different pseudo flow resistances are predicted with the established model in which the data are taken from the Shengtuo Oilfield. Simulation results show that the pseudo flow resistance contrast should be less than 4 when the layer regrouping is implemented. The K-means clustering method, which is based on the objec- tive function, is used to automatically carry out the layer regrouping process according to pseudo flow resistances. The research result is applied to the IV-VI sand groups of the second member of the Shahejie Formation in the Shengtuo Oilfield, a favorable development performance is obtained, and the oil recovery is enhanced by 6.08 %.

Physical simulation of hydrodynamic conditions in high rank coalbed methane reservoir formation

In order to select highly productive and enriched areas of high rank coalbed methane reservoirs, based on hydrologic geology as one of the main factors controlling coalbed methane （CBM） reservoir formations, the effect of hydrodynamic forces controlling CBM reservoir formations was studied by a physical simulation experiment in which we used CBM reservoir simulation facilities. The hydrodynamic conditions of high coal rank reservoirs in the Qinshui basin were analyzed. Our experiment shows the following results： under strong hydrodynamic alternating action, 6C~ of coalbed methane reservoir changed from the start at -2.95% ~ -3.66%, and the lightening process occurred in phases; the CI-I4 volume reduced from 96.35% to 12.42%; the CO2 vo- lume decreased from 0.75% in sample 1 to 0.68% in sample 2, then rose to 1.13% in sample 3; the N2 volume changed from 2.9% in sample 1 to 86.45% in sample 3. On one hand, these changes show the complexity of CBM reservoir formation; on the other hand, they indicate that strong hydrodynamic actions have an unfavorable impact on CBM reservoir formation. It was found that the gas volume and hydrodynamic intensity were negatively correlated and low hydrodynamic flow conditions might result in highly productive and enriched areas of high rank CBM.

Reservoir characteristics and hydrocarbon accumulation of Carboniferous volcanic weathered crust of Zhongguai high area in the western Junggar Basin, China

Based on the drilling,cores,logs,seismic,laboratory analysis and so on,reservoir characteristics and hydrocarbon accumulation of Carboniferous volcanic weathered crust in Zhongguai high area are studied.Volcanic rocks were formed in an island arc environment.The lithology is mainly andesite and tuff;Reservoir spaces are mainly secondary pore,fracture and their combination forms,fractures have a better effect on reservoir seepage;There are four layer structures of volcanic weathered crust,weathered clay layer,strongly weathered zone,weakly weathered zone and unweathered zone and strongly weathered zone is the best,which is the main reservoir development zone;The development of reservoir is mainly affected by weathering-leaching,lithology and lithofacies,and fault(fracture);Effective reservoirs could reach to 480 m thickness(high quality reservoirs are within 240 m).Carboniferous volcanic reservoirs are distributed along three zones,which are near the fault zone,high structural part,favorable lithofacies development zone,and one plane,which is near the unconformity.

Geological characteristics and high production control factors of shale gas reservoirs in Silurian Longmaxi Formation, southern Sichuan Basin, SW China

Marine shale gas resources have great potential in the south of the Sichuan Basin in China.At present,the high-quality shale gas resources at depth of 2000–3500 m are under effective development,and strategic breakthroughs have been made in deeper shale gas resources at depth of 3500–4500 m.To promote the effective production of shale gas in this area,this study examines key factors controlling high shale gas production and presents the next exploration direction in the southern Sichuan Basin based on summarizing the geological understandings from the Lower Silurian Longmaxi Formation shale gas exploration combined with the latest results of geological evaluation.The results show that:(1)The relative sea depth in marine shelf sedimentary environment controls the development and distribution of reservoirs.In the relatively deep water area in deep-water shelf,grade-I reservoirs with a larger continuous thickness develop.The relative depth of sea in marine shelf sedimentary environment can be determined by redox conditions.The research shows that the uranium to thorium mass ratio greater than 1.25 indicates relatively deep water in anoxic reduction environment,and the uranium to thorium mass ratio of 0.75–1.25 indicates semi-deep water in weak reduction and weak oxidation environment,and the uranium to thorium mass ratio less than 0.75 indicates relatively shallow water in strong oxidation environment.(2)The propped fractures in shale reservoirs subject to fracturing treatment are generally 10–12 m high,if grade-I reservoirs are more than 10 m in continuous thickness,then all the propped section would be high-quality reserves;in this case,the longer the continuous thickness of penetrated grade-I reservoirs,the higher the production will be.(3)The shale gas reservoirs at 3500–4500 m depth in southern Sichuan are characterized by high formation pressure,high pressure coefficient,well preserved pores,good pore structure and high proportion of free gas,making them the most favorable new field for shale gas exploration;and the pressure coefficient greater than 1.2 is a necessary condition for shale gas wells to obtain high production.(4)High production wells in the deep shale gas reservoirs are those in areas where Long11-Long13 sub-beds are more than 10 m thick,with 1500 m long horizontal section,grade-I reservoirs penetration rate of over 90%,and fractured by dense cutting+high intensity sand injection+large displacement+large liquid volume.(5)The relatively deep-water area in the deep-water shelf and the area at depth of 3500–4500 m well overlap in the southern Sichuan,and the overlapping area is the most favorable shale gas exploration and development zones in the southern Sichuan in the future.With advancement in theory and technology,annual shale gas production in the southern Sichuan is expected to reach 450×108 m3.

Lost circulation material for abnormally high temperature and pressure fractured-vuggy carbonate reservoirs in Tazhong block, Tarim Basin, NW China

To effectively solve the problem of lost circulation and well kick frequently occurring during the drilling of abnormally high temperature and pressure fractured-vuggy reservoirs in the Tazhong block, a rigid particle material, GZD, with high temperature tolerance, high rigidity(> 8 MPa) and low abrasiveness has been selected based on geological characteristics of the theft zones in the reservoirs. Through static pressure sealing experiments, its dosage when used alone and when used in combination with lignin fiber, elastic material SQD-98 and calcium carbonate were optimized, and the formula of a new type(SXM-I) of compound lost circulation material with high temperature tolerance and high strength was formed. Its performance was evaluated by compatibility test, static sealing experiment and sand bed plugging experiment. The test results show that it has good compatibility with drilling fluid used commonly and is able to plug fractures and vugs, the sealed fractures are able to withstand the static pressure of more than 9 MPa and the cumulative leakage is 13.4 mL. The mud filtrate invasion depth is only 2.5 cm in 30 min when the sand bed is made of particles with sizes between 10 mesh and 20 mesh. Overall, with good sealing property and high temperature and high pressure tolerance, the lost circulation material provides strong technical support for the safety drilling in the block.

Heterogeneity and influencing factors of marine gravity flow tight sandstone under abnormally high pressure:A case study from the Miocene Huangliu Formation reservoirs in LD10 area,Yinggehai Basin,South China Sea

The characteristics of reservoir heterogeneity of the marine gravity flow tight sandstone from the Miocene Huangliu Formation under abnormally high pressure setting at LD10 area in Yinggehai Basin are studied,and the influencing factors on reservoir heterogeneity are discussed,based on modular formation dynamics test,thin sections,XRD analysis of clay minerals,scanning electron microscopy,measurement of pore throat image,porosity and permeability,and high pressure Hg injection,as well as the stimulation of burial thermal history.The aim is to elucidate characteristics of the heterogeneity and the evolution process of heterogeneity of the reservoir,and predict the favorable reservoirs distribution.(1)The heterogeneity of the reservoir is mainly controlled by the cement heterogeneity,pore throat heterogeneity,quality of the reservoir heterogeneity,and the diagenesis under an abnormally high pressure setting.(2)The differences in pore-throat structure caused by diagenetic evolution affected the intergranular material heterogeneity and the pore throat heterogeneity,and finally controlled the heterogeneity of reservoir quality.(3)Compared with the reservoir under normal pressure,abnormally high pressure restrains strength of the compaction and cementation and enhances the dissolution of the reservoir to some extent,and abnormally high pressure thus weakening the heterogeneity of the reservoir to a certain degree.The favorable reservoirs are mainly distributed in the gravity flow sand body under the strong overpressure zone in the middle and lower part of Huangliu Formation.

Spatial-temporal coupling between high-quality source rocks and reservoirs for tight sandstone oil and gas accumulations in the Songliao Basin, China

The spatial-temporal relationship between high-quality source rocks and reservoirs is a key factor when evaluating the formation,occurrence,and prospectivity of tight oil and gas reservoirs.In this study,we analyze the fundamental oil and gas accumulation processes occurring in the Songliao Basin,contrasting tight oil sand reservoirs in the south with tight gas sand reservoirs in the north.This is done using geochemical data,constant-rate and conventional mercury injection experiments,and fluid inclusion analyses.Our results demonstrate that as far as fluid mobility is concerned,the expulsion center coincides with the overpressure zone,and its boundary limits the occurrence of tight oil and gas accumulations.In addition,the lower permeability limit of high-quality reservoirs,controlled by pore-throat structures,is 0.1×10^-3μm^2 in the fourth member of the Lower Cretaceous Quantou Formation(K1q^4)in the southern Songliao Basin,and 0.05×10^-3μm^2 in the Lower Cretaceous Shahezi Formation(K1sh)in the northern Songliao Basin.Furthermore,the results indicate that the formation of tight oil and gas reservoirs requires the densification of reservoirs prior to the main phase of hydrocarbon expulsion from the source rocks.Reservoir“sweet spots”develop at the intersection of high-quality source rocks(with high pore pressure)and reservoirs(with high permeability).

Features and genesis of Paleogene high-quality reservoirs in lacustrine mixed siliciclastic–carbonate sediments, central Bohai Sea, China

The characteristics and formation mechanisms of the mixed siliciclastic-carbonate reservoirs of the Paleogene Shahejie Formation in the central Bohai Sea were examined based on polarized light microscopy and scanning electron microscopy observations, X-ray diffrac- tometry, carbon and oxygen stable isotope geochemistry, and integrated fluid inclusion analysis. High-quality reservoirs are mainly distributed in Type I and Type II mixed siliciclastic-carbonate sediments, and the dominant pore types include residual primary intergranular pores and intrafossil pores, feldspar dissolution pores mainly devel- oped in Type II sediments. Type I mixed sediments are characterized by precipitation of early pore-lining dolo- mite, relatively weak mechanical compaction during deep burial, and the occurrence of abundant oil inclusions in high-quality reservoirs. Microfacies played a critical role in the formation of the mixed reservoirs, and high-quality reservoirs are commonly found in high-energy environ- ments, such as fan delta underwater distributary channels, mouth bars, and submarine uplift beach bars. Abundant intrafossil pores were formed by bioclastic decay, and secondary pores due to feldspar dissolution further enhance reservoir porosity. Mechanical compaction was inhibited by the precipitation of pore-lining dolomite formed during early stage, and oil emplacement has further led to the preservation of good reservoir quality.

A Study of Thin Sandstone Reservoirs by High-resolution Seismic Inversion

In this paper seismic inversion was used as a key technique and the seismic wavelet most suitable to the actual underground situation was extracted with the higher-order statistics algorithm. The wavelets extracted in this way and the wavelets extracted with the seismic statistics techniques were used separately for inverting the seismic data of the southern part of Tahe oilfield, Tarim basin. The results showed that the resolution of the wavelet inversion with the higher-order statistics method was greatly improved, and the wavelet-inverted section could better distinguish the thin sandstone reservoirs of the upper and lower Carboniferous and their lateral distribution, providing a reliable basis of analysis for the study of thin sandstone reservoirs.

Pre-Drilling Prediction Techniques on the High-Temperature High-Pressure Hydrocarbon Reservoirs Offshore Hainan Island,China

Decreasing the risks and geohazards associated with drilling engineering in high-temperature high-pressure(HTHP) geologic settings begins with the implementation of pre-drilling prediction techniques(PPTs). To improve the accuracy of geopressure prediction in HTHP hydrocarbon reservoirs offshore Hainan Island, we made a comprehensive summary of current PPTs to identify existing problems and challenges by analyzing the global distribution of HTHP hydrocarbon reservoirs, the research status of PPTs, and the geologic setting and its HTHP formation mechanism. Our research results indicate that the HTHP formation mechanism in the study area is caused by multiple factors, including rapid loading, diapir intrusions, hydrocarbon generation, and the thermal expansion of pore fluids. Due to this multi-factor interaction, a cloud of HTHP hydrocarbon reservoirs has developed in the Ying-Qiong Basin, but only traditional PPTs have been implemented, based on the assumption of conditions that do not conform to the actual geologic environment, e.g., Bellotti's law and Eaton's law. In this paper, we focus on these issues, identify some challenges and solutions, and call for further PPT research to address the drawbacks of previous works and meet the challenges associated with the deepwater technology gap. In this way, we hope to contribute to the improved accuracy of geopressure prediction prior to drilling and provide support for future HTHP drilling offshore Hainan Island.

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

Plugging agents have been widely used to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,the harsh conditions of fractured-vuggy carbonate reservoirs yield a significant challenge in maintaining a long-term stabilization of plugging agents.In this work,we developed an anti-hightemperature and high-salinity polymer gel(APG)with excellent resistance to high temperature(140℃)and ultra-high salinity(240000 mg/L).The rheology and microstructure of APG were characterized before and after gelation.Core plugging tests on fractured cubic cores were conducted to quantify the plugging performance of the gel system.Experimental results showed that the Sclerglucan and Cobalt(Ⅱ)Chloride Hexahydrate filled the three-dimensional(3-D)network with various morphologies,providing extra protection to the cross-linking points of the 3D network structure of APG and thus,leading to a prolongation of the dehydration time.The dehydration rate of APG was only 5%within 30days,and the strength of APG could be maintained at a rigid or near-rigid level over 150 days.Moreover,APG exhibited satisfactory shear and scour resistance.Core plugging tests showed that APG could achieve a plugging rate of 90%and demonstrate ignorable minor damage to the substrate.Our results indicate that APG can serve as a great candidate in channel plugging in fractured-vuggy carbonate reservoirs where fractures are fully developed.

Numerical simulation of high-resolution azimuthal resistivity laterolog response in fractured reservoirs

The high-resolution azimuthal resistivity laterolog response in a fractured formation was numerically simulated using a three-dimensional finite element method. Simulation results show that the azimuthal resistivity is determined by fracture dipping as well as dipping direction, while the amplitude differences between deep and shallow laterolog resistivities are mainly controlled by the former. A linear relationship exists between the corrected apparent conductivities and fracture aperture. With the same fracture aperture, the deep and shallow laterolog resistivities present small values with negative separations for low-angle fractures, while azimuthal resistivities have large variations with positive separations for high-angle fractures that intersect the borehole. For dipping fractures, the variation of the azimuthal resistivity becomes larger when the fracture aperture increases. In addition, for high-angle fractures far from the borehole, a negative separation between the deep and shallow resistivities exists when fracture aperture is large as well as high resistivity contrast exists between bedrock and fracture fluid. The decreasing amplitude of dual laterolog resistivity can indicate the aperture of low-angle fractures, and the variation of the deep azimuthal resistivity can give information of the aperture of high-angle fractures and their position relative to the borehole.

High-Temperature Overpressure Basin Reservoir and Pressure Prediction Model

Yinggehai Basin locates in the northern South China Sea. Since the Cainozoic Era, crust has several strong tension: the basin subsides quickly, the deposition is thick, and the crust is thin. In the central basin, formation pressure coefficient is up to 2.1;Yinggehai Basin is a fomous high-temperature overpressure basin.YinggehaiBasin’s in-depth, especially high-temperature overpressure stratum has numerous large-scale exploration goals. As a result of high-temperature overpressure basin’s perplexing geological conditions and geophysical analysis technical limitations, this field of gas exploration can’t be carried out effectively, which affects the process of gas exploration seriously. A pressure prediction model of the high-temperature overpressure basin in different structural positions is summed up by pressure forecast pattern research in recent years, which can be applied to target wells pre-drilling pressure prediction and post drilling pressure analysis of Yinggehai Basin. The model has small erroneous and high rate of accuracy. The Yinggehai Basin A well drilling is successful in 2010, and gas is discovered in high-temperature overpressure stratum, which proved that reservoir can be found in high-temperature overpressure stratum. It is a great theoretical breakthrough of reservoir knowledge.

Formation mechanisms and distribution of high quality reservoirs in deep strata in Palaeogene in northern steep slope zone of Bonan sag, Jiyang depression, China

Petrographic analysis combined with various techniques, such as thin section identification, petro-physical property testing, mercury penetration, oil testing results, was used to assess basic reservoir characteristics of deep strata in Palaeogene in the northern steep slope zone of the Bonan sag, China. The formation mechanisms of high quality reservoirs in deep strata were discussed according to evolution characteristics of paleopressures and paleofluids in geological period. The deep reservoirs have poor physical properties and mainly develop extra-low porosity, extra-low and ultra-low permeability reservoirs. Reservoir spaces mainly consist of secondary pores and overpressure fractures. Early overpressure, early hydrocarbon filling and dissolution by early organic acids are the major formation mechanisms of high quality reservoirs. The conglomerate in inner fan which had a poor primary physical property mainly experienced strong compaction and calcareous matrix recrystallization. The physical properties of the inner fan were poor with weak dissolution because of poor mobility of fluid. The reservoirs mainly are type IV reservoirs and the distribution extends with the burial depth. The braided channel reservoirs in the middle fan had relative good primary physical properties and strong ability to resist compaction which favored the preservation of primary pores. Large amounts of the secondary porosities were created due to dissolution by early organic acids. A series of micro-fractures generated by early overpressures would be important migration pathways for hydrocarbon and organic acids. Furthermore, early overpressures had retarded maturation of organic matters and organic acids which had flowed into reservoirs already and could keep in acid environment for a long time. This process would contribute significantly to reinforcing the dissolution and enhancing the reservoir quality. The braided channel reservoirs were charged with high oil saturation preferentially by early hydrocarbon filling which could inhibit later cementation. Therefore, the braided channel reservoirs develop a great quantity of reservoir spaces with type I, type II and type III reservoirs in the majority in the deep strata. With the burial depth, distributions of type I and type II reservoirs are narrowed and distribution of type III reservoirs decreases first and then extends. The reservoirs both in outer fan and in interdistributary of the middle fan have extremely poor physical properties because of extensive carbonate cementation. The type of the reservoirs mainly is type IV.