Fine upper crustal structure of Jiashi strong earthquake swarm region in Xinjiang in-ferred from high resolution seismic refraction profile data

The data obtained from a high resolution seismic refraction profile, which was carded out in Jiashi, Xinjiang, strong earthquake swarm area, were processed with both finite difference inversion and Hagedoorn refractor wavefront imaging technique and the fine upper crustal structure was determined. The results show that the upper crustal structure is relatively well-distributed in laterally and obviously by layers vertically.From surface to 11.0 km depth, there are about four layers. The P wave velocity of top two layers range from 1.65 to 4.5 km/s and their bottom boundaries, the buried depths of which are 0.4, 2.96-3.0 km respectively, are almost horizontal; The third layer is comparatively complicated and its P wave velocity presents inhomogeneous in both laterally and vertically. The bottom boundary of third layer is crystalline basement and shows a little uplift, which seemly suggest that the upper crust had been resisted while the hard Tarim block inserting into Tianshan Mountain; The forth layer is relatively even and its P wave velocity is about 6.3 km/s. There are a lateral velocity variation at the depth of about 4.0 km, and suggest that it has something to do with the hidden Meigaiti fault and Meigaiti-Xiasuhong fault but there are no the structure features about these faults stretching to the surface and passing through the crystalline basement. The seismogenic tectonic of Jiashi strong earthquake swarm at least lies in middle or lower crust beneath 11.0 km depth.

High index of refraction via quantum interference in a three-level system of Er^3＋-doped yttrium aluminium garnet crystal

A simple three-level system is proposed to produce high index of refraction with zero absorption in an Er^3＋-doped yttrium aluminium garnet （YAG） crystal, which is achieved for a probe field between the excited state 4I13/2 and ground state 4I15/2 by adjusting a strong coherent driving field between the upper excited state 4I11/2 and 4I15/2. It is found that the changes of the frequency of the coherent driving field and the concentration of Er^3＋ ions in the YAG crystal can maximize the index of refraction accompanied by vanishing absorption. This result could be useful for the dispersion compensation in fibre communication, laser particle acceleration, high precision magnetometry and so on.

Fabrication of UV-Curing Linalool-Polysiloxane Hybrid Films with High Refractive Index and Transparency

In this article,a series of high refractive indices(1.50-1.53)thiol phenyl polysiloxane(TPS)were synthesized via hydrolytic sol-gel reaction.The Fourier transform infrared spectra(FT-IR)and nuclear magnetic resonance spectra(NMR)results showed that TPS conformed to the predicted structures.Natural terpene linalool was exploited as photocrosslinker to fabricate UV-curing linalool-polysiloxane hybrid films(LPH)with TPS via photoinitiated thiol-ene reaction.LPH rapidly cured under UV irradiation at the intensity of 80 mW/cm^(2) in 30 s,exhibiting good UV-curing properties.The optical transmittance of LPH in the wavelength of 300-800 nm was over 90%,exhibiting good optical transparency.The water contact angle and water vapor permeability results showed that the introduction of phenyl groups enhance the hydrophobicity and water vapor barrier properties of LPH.The results indicated the potential of LPHs in the applications of optical functional coatings.

High Refractive Index Ti3O5 Films for Dielectric Metasurfaces

Ti33O55 films are deposited with the help of an electron beam evaporator for their applications in metasurfaces. The film of subwavelength （632nm） thickness is deposited on a silicon substrate and annealed at 400℃. The ellipsometry result shows a high refractive index above 2.5 with the minimum absorption coefficient in the visible region, which is necessary for high efficiency of transparent metasurfaces. Atomic force microscopy analysis is employed to measure the roughness of the as-deposited films. It is seen from micrographs that the deposited films are very smooth with the minimum roughness to prevent scattering and absorption losses for metasurface devices. The absence of grains and cracks can be seen by scanning electron microscope analysis, which is favorable for electron beam lithography. Fourier transform infrared spectroscopy reveals the transmission and reflection obtained from the film deposited on glass substrates. The as-deposited film shows high transmission above 60%, which is in good agreement with metasurfaces.

High-performance lens antenna using high refractive index metamaterials

In this paper, a high refractive index metamaterial （HRM）, whose element is composed of bilayer square patch （BSP） spaced by a dielectric plate, is proposed. By reducing the thickness of the dielectric plate and the gap between adjacent patches, the BSP can effectively enhance capacitive coupling and simultaneously suppress diamagnetic response, which significantly increases the refractive index of the proposed metamaterial. Furthermore, the high refractive index region is far away from the resonant region of the metamaterial, resulting in broadband. Based on these characteristics of BSP, a gradient refractive index （GRIN） lens with thin thickness （0.34/~0, where 2~0 is the wavelength at 5.75 GHz） is designed. By using this lens, we then design a circularly polarized horn antenna with high performance. The measurement results show that the 3-dB axial ratio bandwidth is 34.8% （4.75 GHz-6.75 GHz） and the antenna gain in this frequency range is increased by an average value of 3.4 dB. The proposed method opens up a new avenue to design high-performance antenna.

Basement interface structural characteristics beneath Jiashi strong earthquake swarm area in Xinjiang, China

The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interface structural characteristics beneath Jiashi strong earthquake swarm area were determined. The results show that there are two clear basement interfaces at the upper crust in Jiashi strong earthquake swarm area. The first one with buried depth ranging from 2.6 km to 3.3 km presents integral and continuous structure, and it appears an inclined plane interface and smoothly rises up toward Tianshan Mountain. The second basement interface with buried depth from 8.5 km to 11.8 km, is the antiquated crystalline basement of Tarim basin. Near the post number of 37 km, the buried depth of the crystalline basement changed abruptly by 2.5 km, which maybe result from an ultra crystalline basement fault. If taking this fault as a boundary, the crystalline basement could be divided into two parts, i.e. the southwestern segment with buried depth about 11.5 km, and the northeastern segment with buried depth approxi-mately from 8.5 km to 9.0 km. That is to say, in each segment, the buried depth changes not too much. The northeast segment rises up as a whole and upheaves slightly from southwest to northeast, which reflects the upper crustal deformation characteristics under the special tectonic background at the northwestern edge of Tarim basin.

High-refractive index acrylate polymers for applications in nanoimprint lithography

The development of polymeric optical materials with a higher refractive index,transparency in the visible spectrum region and easier processability is increasingly desirable for advanced optical applications such as microlenses,image sensors,and organic light-emitting diodes.Most acrylates have a low refractive index(around 1.50)which does not meet the high perfo rmance requirements of advanced optical materials.In this research,three novel acrylates were synthesized via a facile one-step approach and used to fabricate optical transparent polymers.All of the polymers reveal good optical properties including high transparency(≥90%)in the visible spectrum region and high refractive index values(1.6363)at 550 nm.Moreover,nanostructures of these acrylate polymers with various feature sizes including nanogratings and photonic crystals were successfully fabricated using nanoimprint lithography.These results indicate that these acrylates can be used in a wide range of optical and optoelectronic devices where nanopatterned films with high refractive index and transparency are required.

Preparation of Titanium-silphenylene-siloxane Hybrid Polymers with High Refractive Index,Transmittance,and Thermal Stability

Vinyl-containingtitanium-silphenylene-sioxane oligomers(O1,O2,O3,andO4)withdifferent molar ratios of titanium to silicon were successfully synthesized in high yields by nonhydrolytic sol-gel reaction,and the obtained four oligomers were further crosslinked with methylphenyl hydro-silicone oil(4)to form corresponding polymers(P1,P2,P3,and P4)by hydrosilylation reaction.Their structures were characterized with spectroscopic characterization techniques including FTIR,1H-NMR,and Raman spectroscopy.The effect of titanium element on crosslinking behavior,thermal resistance,refractive index,transparency,thermal aging stability,glass transition temperature,and surface properties of the polymers were studied.Compared with titanium-free polymer P1,the thermal resistance,refractive index,and thermal aging stability of titanium-silphenylene-siloxane polymers(P2,P3,and P4)were significantly improved.The titanium-silphenylene-siloxane polymers achieved a high refractive index(n=1.580-1.584)and thermostability(Tsd>500℃).In thermal aging,the polymers exhibited superior performances with high optical transparency(~90%at 450 nm)and exhibited high thermal stability(~84%at 450 nm after thermal aging at 150℃for 120 h).These data indicate that the polymers have potential application in optical materials such as LED encapsulants.

Optical properties and irradiation resistance of novel high-entropy oxide glasses La_(2)O_(3)-TiO_(2)-Nb_(2)O_(5)-WO_(3)-M_(2)O_(3)(M=B/Ga/In)

A new class of high-entropy oxide glasses 20LaO_(3/2)-20TiO_(2)-20NbO_(5/2)-20WO_(3)-20MO_(3/2)(M=B/Ga/In)were designed and successfully fabricated by aerodynamic containerless processing.The results show that one can control the properties and increase the functionality of glass by changing the type of M.The Vicker's hardness reaches the highest value of 6.45 GPa for glass M=B.The best thermal stability and the glass forming ability,measured using the glass-transition temperature T_(g) and the temperature gap ΔT respectively,are found in glass M=In,with T_(g)=740℃ and ΔT=72℃.The optical properties show that the as-prepared glasses exhibit good transparency and high refractive index.Especially for glass M=In,its transmittance reaches almost 78% from visible to IR region,and the value is nearly unchanged after electron beam irradiation,indicating good irradiation resistance of this high-entropy oxide glass.Furthermore,the glass M=In has the highest refractive index(n_(d)=2.46) and low wavelength dispersion(v_(d)=45.6).These results demonstrate that the conceptual design of high-entropy materials is adaptable to high performance oxide glasses,which should be promising host materials for optical applications such as smart phones with digital cameras and endoscopes.

Advancements in high refractive index media:from quantum coherence in atomic systems to deep subwavelength coupling in metamaterials[Invited]

Refractive index enhancement is crucial in the fields of lithography,imaging,optical communications,solar devices,and many more.We present a review of advancements in the process of designing high refractive index metamaterials,starting from quantum coupling and photonic bandgap materials to metamaterials utilizing deep subwavelength coupling to achieve ever-high values of refractive index.A particular attention is given to experimentally verified schemes in engineering a high index of refraction.The understanding of the evolution of material design from intrinsic electronic states manipulation to meta-atoms design is not only fascinating but also a prerequisite to developing successful devices and applications.

Experimental far-field imaging properties of high refractive index microsphere lens

The far-field imaging properties of a high index microsphere lens spatially separated from the object are experimentally studied. Our experimental results show that, for a Blu-ray disk whose spacing is 300 nm, the high index microsphere lens also can discern the patterns of the object sample when the distance between the lens and the object is up to 5.4 μm. When the distance is increased from 0 to 5.4 μm, for the microsphere lens with a diameter of 24 μm, the lateral magnification increases from 3.5× to 5.5×, while the field of view decreases from 5.1 to 3.0 μm. By varying the distance between the lens and the object, the optical image can be optimized. We also indicate that the far-field imaging capability of a high index microsphere lens is dependent on the electromagnetic field intensityprofile of the photonic nanojet under different positions of the microsphere lens.

A fluid-guided printing strategy for patterning high refractive index photonic microarrays

High refractive index(HRI,n>1.8)photonic structures offer strong light confinement and refractive efficiencies,cover the entire visible spectrum and can be tuned by designing geometric arrayed features.However,its practical applications are still hindered by the applicability and material limitation of lithography-based micro/nano fabrication approaches.Herein,we demonstrate a fluid-guided printing process for preparing HRI selenium microarrays.The microstructured flexible template is replicated from the diced silicon wafer without any lithography-based methods.When heated above the glass transition temperature,the flow characteristics of selenium endows the structure downsizing and orientation patterning between the target substrate and the template.Near 10 times narrowing selenium microarrays(1.9μm width)are patterned from the non-lithography template(18μm width).HRI selenium microarrays offer high refractive efficiencies and strong optical confinement abilities,which achieve angledependent structurally coloration and polarization.Meanwhile,the color difference can be recognized under the one degree distinction of the angle between incident and refracted light.This printing platform will facilitate HRI optical metasurfaces in a variety of applications,ranging from photonic sensor,polarization modulation to light manipulation.

SYNTHESIS AND CHARACTERIZATION OF FUNCTIONALIZED CARBON BLACK/POLY(VINYL ALCOHOL) HIGH REFRACTIVE INDEX NANOCOMPOSITES

Carbon black （CB）/polymer composites with high refractive index （RI） were fabricated from poly（vinyl alcohol） （PVA） and covalently functionalized nano-CB （PVA-es-CB） by simple esterification reaction. Transmission electron microscopy showed that tmifonn aggregates of PVA-es-CB nanoparticles with a size smaller than I00 nm formed in the nanocomposite films. Ellipsometric measurements indicated that the PVA-es-CB/PVA composite films had a RI in the range 1.520-1.598 linearly increased with the PVA-es-CB volume content. Theoretical equation based on Lorentz-Lorenz theory provided reasonably close estimation of the refractive indices to the experimentally observed values. The hybrid films also revealed relatively good surface planarity, thermal stability and optical transparency.

Refractive index measurement of dielectric samples using highly focused radially polarized light(Invited Paper)

In this Letter, a refractive index measurement of a dielectric sample using highly focused radially polarized light is reported. Through imaging analysis of the optical field at the pupil plane of a high numerical aperture （NA） objective lens reflected by the sample under study, the Brewster angle is found. Employing a high NA objective lens allows the measurement of multiple angles of incidence from 0° to 64° in a single shot. The refractive index of the sample is estimated using the measured Brewster angle. The experimental results are compared with the theoretical images computed with the Fresnel theory, and a good agreement is obtained.

Rutile TiO2 Microspheres with Exposed Nano-Acicular Single Crystals for Dye-Sensitized Solar Cells

Uniquely structured rutile TiO2 microspheres with exposed nano-acicular single crystals have been successfully synthesized via a facile hydrothermal method. After calcination at 450 ℃ for 2 h, the futile TiO2 microspheres with a high surface area of 132 m2/g have been utilized as a light harvesting enhancement material for dye-sensitized solar cells （DSSCs）. The resultant DSSCs exhibit an overall light conversion efficiency of 8.41% for TiO2 photoanodes made of futile TiO2 microspheres and anatase TiO, nanoparticles （mass ratio of 1：1）, significantly higher than that of pure anatase TiO2 nanoparticle photoanodes of similar thickness （6.74%）. Such a significant improvement in performance can be attributed to the enhanced light harvesting capability and synergetic electron transfer effect. This is because the photoanodes made of futile TiO2 microsphere possess high refractive index which improves the light utilisation efficiency, suitable microsphere core sizes （450-800 nm） to effectively scatter visible light, high surface area for dye loading, and synergetic electron transfer effects between nanoparticulate anatase and nano-acicular futile single crystals phases giving high electron collection efficiency.

Alternating Copolymerization of Epoxides and Isothiocyanates to Diverse Functional Polythioimidocarbonates and Related Block Polymers

Synthesis of diverse polythioimidocarbonates via ring-opening copolymerization of epoxides and isothiocyanates catalyzed by organoboron catalyst was reported herein.Both aromatic and aliphatic isothiocyanates underwent successful copolymerization with terminal and internal epoxides,allowing for the precise tuning of the performance of the resultant copolymers over a broad range.The wide scope of available isothiocyanates and epoxides enables the direct construction of sulfur-containing functional polymers featuring both high glass transition temperature and refractive index.Additionally,it was observed that aromatic isothiocyanates polymerize much faster than aliphatic ones,and the reactivity difference facilitated the one-step synthesis of block polymers from mixed aromatic isothiocyanates,aliphatic isothiocyanates and epoxides due to the preferential incorporation of aromatic isothiocyanates over the aliphatic analogues during their alternating copolymerization with epoxides.The produced polythioimidocarbonates can be used as positive resists for electron beam lithography(sensitivity of 130μC/cm^(2) and contrast of 1.53 for poly(CHO-alt-EITC)).Coupling with their high refractive index(1.58—1.68),polythioimidocarbonates might find functional applications in optics.These results render ring-opening copolymerization of epoxides and isothiocyanates a facile route to enrich functional polymer library.