Direct strain mapping from high resolution transmission electron microscopy images is possible for coherent structures. At proper imaging conditions the intensity peaks in the image have a constant spatial relationshi...Direct strain mapping from high resolution transmission electron microscopy images is possible for coherent structures. At proper imaging conditions the intensity peaks in the image have a constant spatial relationship with the projected atom columns. This allows the determination of the geometry of the projected unit cell without comparison with image simulations. The fast procedure is particularly suited for the analysis of large areas. The software package LADIA is written in the PV-WAVE code and provides all necessary tools for image processing and analysis. Image intensity peaks are determined by a cross-correlation technique, which avoids problems from noise in the low spatial frequency range. The lower limit of strain that can be detected at a sampling rate of 44 pixels/nm is≈2%.展开更多
High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening,and whereas usually lead to degraded toughness for especially ferritic steels.Hence,it is important t...High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening,and whereas usually lead to degraded toughness for especially ferritic steels.Hence,it is important to understand the formation behaviors of the Cu precipitates.High-resolution transmission electron microscopy(TEM)is utilized to investigate the structure of Cu precipitates thermally formed in a high-strength low-alloy(HSLA)steel.The Cu precipitates were generally formed from solid solution and at the crystallographic defects such as martensite lath boundaries and dislocations.The Cu precipitates in the same aging condition have various structure of BCC,9 R and FCC,and the structural evolution does not greatly correlate with the actual sizes.The presence of different structures in an individual Cu precipitate is observed,which reflects the structural transformation occurring locally to relax the strain energy.The multiply additions in the steel possibly make the Cu precipitation more complex compared to the binary or the ternary Fe-Cu alloys with Ni or Mn additions.This research gives constructive suggestions on alloying design of Cu-bearing alloy steels.展开更多
Structural characteristics of Alo.55 Gao.45N epilayer were investigated by high resolution x-ray diffraction（HRXRD）and transmission electron microscopy（TEM）;the epilayer was grown on GaN/sapphire substrates using ...Structural characteristics of Alo.55 Gao.45N epilayer were investigated by high resolution x-ray diffraction（HRXRD）and transmission electron microscopy（TEM）;the epilayer was grown on GaN/sapphire substrates using a high-temperature A1 N interlayer by metal organic chemical vapor deposition technique.The mosaic characteristics including tilt,twist,heterogeneous strain,and correlation lengths were extracted by symmetric and asymmetric XRD rocking curves as well as reciprocal space map（RSM）.According to Williamson-Hall plots,the vertical coherence length of AlGaN epilayer was calculated,which is consistent with the thickness of AlGaN layer measured by cross section TEM.Besides,the lateral coherence length was determined from RSM as well.Deducing from the tilt and twist results,the screw-type and edge-type dislocation densities are 1.0×10~8 cm^（-2） and 1.8×10^（10） cm^（-2）,which agree with the results observed from TEM.展开更多
文摘Direct strain mapping from high resolution transmission electron microscopy images is possible for coherent structures. At proper imaging conditions the intensity peaks in the image have a constant spatial relationship with the projected atom columns. This allows the determination of the geometry of the projected unit cell without comparison with image simulations. The fast procedure is particularly suited for the analysis of large areas. The software package LADIA is written in the PV-WAVE code and provides all necessary tools for image processing and analysis. Image intensity peaks are determined by a cross-correlation technique, which avoids problems from noise in the low spatial frequency range. The lower limit of strain that can be detected at a sampling rate of 44 pixels/nm is≈2%.
基金Supported by Startup Fund for Youngman Research at SJTU(SFYR at SJTU)National Basic Research Program of China(Grant No.2011CB012904)China Postdoctoral Science Foundation(Grant No.2013M541517)
文摘High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening,and whereas usually lead to degraded toughness for especially ferritic steels.Hence,it is important to understand the formation behaviors of the Cu precipitates.High-resolution transmission electron microscopy(TEM)is utilized to investigate the structure of Cu precipitates thermally formed in a high-strength low-alloy(HSLA)steel.The Cu precipitates were generally formed from solid solution and at the crystallographic defects such as martensite lath boundaries and dislocations.The Cu precipitates in the same aging condition have various structure of BCC,9 R and FCC,and the structural evolution does not greatly correlate with the actual sizes.The presence of different structures in an individual Cu precipitate is observed,which reflects the structural transformation occurring locally to relax the strain energy.The multiply additions in the steel possibly make the Cu precipitation more complex compared to the binary or the ternary Fe-Cu alloys with Ni or Mn additions.This research gives constructive suggestions on alloying design of Cu-bearing alloy steels.
基金Project supported by the National Key Research and Development Project of China(Grant No.2016YFB0400100)the Hi-tech Research Project of China(Grant Nos.2014AA032605 and 2015AA033305)+5 种基金the National Natural Science Foundation of China(Grant Nos.61274003,61422401,51461135002,and61334009)the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BY2013077,BK20141320,and BE2015111)the Project of Green Young and Golden Phenix of Yangzhou City,the Postdoctoral Sustentation Fund of Jiangsu Province,China(Grant No.1501143B)the Project of Shandong Provinceial Higher Educational Science and Technology Program,China(Grant No.J13LN08)the Solid State Lighting and Energy-saving Electronics Collaborative Innovation Center,Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)Research Funds from NJU–Yangzhou Institute of Opto-electronics
文摘Structural characteristics of Alo.55 Gao.45N epilayer were investigated by high resolution x-ray diffraction（HRXRD）and transmission electron microscopy（TEM）;the epilayer was grown on GaN/sapphire substrates using a high-temperature A1 N interlayer by metal organic chemical vapor deposition technique.The mosaic characteristics including tilt,twist,heterogeneous strain,and correlation lengths were extracted by symmetric and asymmetric XRD rocking curves as well as reciprocal space map（RSM）.According to Williamson-Hall plots,the vertical coherence length of AlGaN epilayer was calculated,which is consistent with the thickness of AlGaN layer measured by cross section TEM.Besides,the lateral coherence length was determined from RSM as well.Deducing from the tilt and twist results,the screw-type and edge-type dislocation densities are 1.0×10~8 cm^（-2） and 1.8×10^（10） cm^（-2）,which agree with the results observed from TEM.
基金sponsored by the National Basic Research Program of China(973 Program)under grant no.2015CB351905the National Natural Science Foundation of China(no.61504019)+3 种基金China Postdoctoral Science Foundation(no.2015M580783)Scientific Research Start-up Foundation of University of Electronic Science and Technology of China(Y02002010301082)the Technology Innovative Research Team of Sichuan Province of China(no.2015TD0005)the Fundamental Research Funds for the Central Universities of China(no.ZYGX2015J140)
