A study of pulsed high voltage driven hollow-cathode electron beam sources through synchronous optical trigger

In this study,a pulsed,high voltage driven hollow-cathode electron beam sources through an optical trigger is designed with characteristics of simple structure,low cost,and easy triggering.To validate the new design,the characteristics of hollow-cathode discharge and electron beam characterization under pulsed high voltage drive are studied experimentally and discussed by discharge characteristics and analyses of waveform details,respectively.The validation experiments indicate that the pulsed high voltage supply significantly improves the frequency and stability of the discharge,which provides a new solution for the realization of a high-frequency,high-energy electron beam source.The peak current amplitude in the high-energy electron beam increases from 6.2 A to 79.6 A,which indicates the pulsed power mode significantly improves the electron beam performance.Besides,increasing the capacitance significantly affects the highcurrent,lower-energy electron beam more than the high-energy electron beam.

The Development of a Megawatt-Level High Current Ion Source

Neutral beam injection is one of the main plasma heating methods in nuclear fusion devices. In order to support the scientific study of the Experimental Advanced Superconducting Tokamak （EAST）, a megawatt-level high current ion source is designed and manufactured in the ASIPP, and the progress and preliminary test results will be presented in this paper.

Sources of Sexual Knowledge among Vietnamese High School Students

This study determined the sources from which Vietnamese high school students currently acquire sexual knowledge as well as the sources from which they believe they should acquire it. Participants were eleventh-grade students at three public high schools in Hanoi, Vietnam. We conducted a questionnaire-based survey from September to October 2012, with 1672 students participating. Responses were received from all 1672 students, a response rate of 100%. Complete data were received from 1653 respondents (98.9%), including 896 males (54.2%) and 757 females (45.8%). The survey was a self-administrated questionnaire. Although many participants believed that they were knowledgeable about sex, only a small number of them actually possessed accurate sexual knowledge. Few participants in this study, targeted to a specific age (eleventh grade), had used the Internet as a major source for obtaining sexual knowledge, in contrast to results from previous studies which covered a wider age demographic. Future research should include comparative studies between eleventh and twelfth graders as well as between those of the same age who are and who are not enrolled in high school. Additionally, it might be beneficial to consider the relationship between adolescent age and Internet use to study the influence of the Internet on sexual knowledge. Our results suggest that parents and schoolteachers should shoulder more responsibility in providing sexual education, particularly by improving their own knowledge and ability to provide such education, because many participants indicated that sexual knowledge should be acquired from parents and schools.

Development of high frequency pulse power source using two powersfor TIG welding

A high frequency pulse power source for TIG welding is developed. The structure of two powers is adopted. The by pass circuit effectively eliminates the effect of the cable equivalent inductance. The maximum frequency of the output pulse current reaches to 16 kHz . The base current and the peak current can be regulated separately.

Simulation on the deformation controlling of T-joint LBW with auxiliary heat source for high strength aluminum alloy

To avoid the angular deformation of aluminum alloy T-joint weldments, a new method named welding with auxiliary heat source is proposed. The welding simulation is performed with the commercial finite element software Abaqus and FORTRAN programme encoding a special conical heat source with Gaussian volumetric distribution of flux. The influence of the local model on the temperature, residual stress, and welding deformation distributions is investigated. The findings show that angular deformation achieved through numerical computation completely consists with the experimental result which has proved the effectiveness of the finite element methods developed. Various measurements performed on small-scale welded test specimens provide a data base of experimental results that serves as a bench mark for qualification of the simulation result. Finally, the residual stress and strain states in a T-joint are predicted.

Source,migration,distribution,toxicological effects and remediation technologies of arsenic in groundwater in China

Groundwater with high arsenic(As) content seriously threatens human life and health. Drinking high-As groundwater for a long time will lead to various pathological changes such as skin cancer, liver cancer,and kidney cancer. High-As groundwater has become one of the most serious environmental geological problems in China and even internationally. This paper aims to systematically summarize the sources,migration, distribution, toxicological effects, and treatment techniques of As in natural groundwater in China based on a large number of literature surveys. High-As groundwater in China is mainly distributed in the inland basins in arid and semi-arid environments and the alluvial and lacustrine aquifers in river deltas in humid environments, which are in neutral to weakly alkaline and strongly reducing environments.The content of As in groundwater varies widely, and As(Ⅲ) is the main form. The main mechanism of the formation of high-As groundwater in China is the reduced dissolution of Fe and Mn oxides under the action of organic matter and primary microorganisms, alkaline environment, intense evaporation and concentration, long-term water-rock interaction, and slow groundwater velocity, which promote the continuous migration and enrichment of As in groundwater. There are obvious differences in the toxicity of different forms of As. The toxic of As(Ⅲ) is far more than As(V), which is considered to be more toxic than methyl arsenate(MMA) and dimethyl arsenate(DMA). Inorganic As entering the body is metabolized through a combination of methylation(detoxification) and reduction(activation) and catalyzed by a series of methyltransferases and reductases. At present, remediation methods for high-As groundwater mainly include ion exchange technology, membrane filtration technology, biological treatment technology, nanocomposite adsorption technology, electrochemical technology, and so on. All the above remediation methods still have certain limitations, and it is urgent to develop treatment materials and technical means with stronger As removal performance and sustainability. With the joint efforts of scientists and governments of various countries in the future, this worldwide problem of drinking-water As poisoning will be solved as soon as possible. This paper systematically summarizes and discusses the hot research results of natural high-As groundwater, which could provide a reference for the related research of high-As groundwater in China and even the world.

Recent Developments of Modulation and Control for High-Power Current-Source-Converters Fed Electric Machine Systems

The pulse-width-modulated(PWM)current-source converters(CSCs)fed electric machine systems can be considered as a type of high reliability energy conversion systems,since they work with the long-life DC-link inductor and offer high fault-tolerant capability for short-circuit faults.Besides,they provide motor friendly waveforms and four-quadrant operation ability.Therefore,they are suitable for high-power applications of fans,pumps,compressors and wind power generation.The purpose of this paper is to comprehensively review recent developments of key technologies on modulation and control of high-power(HP)PWM-CSC fed electric machines systems,including reduction of low-order current harmonics,suppression of inductor–capacitor(LC)resonance,mitigation of common-mode voltage(CMV)and control of modular PWM-CSC fed systems.In particular,recent work on the overlapping effects during commutation,LC resonance suppression under fault-tolerant operation and collaboration of modular PMW-CSCs are described.Both theoretical analysis and some results in simulations and experiments are presented.Finally,a brief discussion regarding the future trend of the HP CSC fed electric machines systems is presented.

Spatial-temporal coupling between high-quality source rocks and reservoirs for tight sandstone oil and gas accumulations in the Songliao Basin, China

The spatial-temporal relationship between high-quality source rocks and reservoirs is a key factor when evaluating the formation,occurrence,and prospectivity of tight oil and gas reservoirs.In this study,we analyze the fundamental oil and gas accumulation processes occurring in the Songliao Basin,contrasting tight oil sand reservoirs in the south with tight gas sand reservoirs in the north.This is done using geochemical data,constant-rate and conventional mercury injection experiments,and fluid inclusion analyses.Our results demonstrate that as far as fluid mobility is concerned,the expulsion center coincides with the overpressure zone,and its boundary limits the occurrence of tight oil and gas accumulations.In addition,the lower permeability limit of high-quality reservoirs,controlled by pore-throat structures,is 0.1×10^-3μm^2 in the fourth member of the Lower Cretaceous Quantou Formation(K1q^4)in the southern Songliao Basin,and 0.05×10^-3μm^2 in the Lower Cretaceous Shahezi Formation(K1sh)in the northern Songliao Basin.Furthermore,the results indicate that the formation of tight oil and gas reservoirs requires the densification of reservoirs prior to the main phase of hydrocarbon expulsion from the source rocks.Reservoir“sweet spots”develop at the intersection of high-quality source rocks(with high pore pressure)and reservoirs(with high permeability).

High X-Ray-to-Optical Flux Ratio Sources From RASS

We present the first results of a program to identify the unknown bright active galactic nuclei (AGN) in the ROSAT All Sky Survey Bright Source Catalog (RASSBSC). We have used lg C+04 R as an alternative expression for lg (f x f opt ), where C is X-ray count rate and R stands for R magnitude. Then a high X-ray-to-optical flux ratio criterion has been used to select an AGN sample with 165 unidentified X-ray sources for optical spectroscopy. At present over 93% of the X-ray sources in the sample have been fully identified in the following classes: emission line AGNs, clusters of galaxies, BL Lacertae objects, and stars.

Sound Source Localisation for a High-Speed Train and Its Transfer Path to Interior Noise

Noise is one of the key issues in the operation of high-speed railways, with sound source localisation and its transfer path as the two major aspects. This study investigates both the exterior and interior sound source distribution of a high-speed train and presents a method for performing the contribution analysis of airborne sound with regard to the interior noise. First, both exterior and interior sound source locations of the high-speed train are identified through in-situ measurements. Second, the sound source contribution for di erent regions of the train and the relationships between the exterior and interior noises are analysed. Third, a method for conducting the contribution analysis of airborne sound with regard to the interior noise of the high-speed train is described. Lastly, a case study on the sidewall area is carried out, and the contribution of airborne sound to the interior noise of this area is obtained. The results show that, when the high-speed train runs at 310 km/h, dominant exterior sound sources are located in the bogie and pantograph regions, while main interior sound sources are located at the sidewall and roof. The interior noise, the bogie area noise and the sound source at the middle of the coach exhibit very similar rates of increase with increasing train speed. For the selected sidewall area, structure-borne sound dominates in most of the 1/3 octave bands.

NUMERICAL EXPERIMENT OF MEDIUM-RANGE CHANGE OF THE SUBTROPICAL HIGH Ⅱ. THE INFLUENCE OF THE HEATINGSOURCE OVER WESTERN TROPICAL PACIFIC

Numerical experiments are carried out using a global spectral model to study the role of an ideal heating source over the western tropical Pacific region in a medium-term weather process that marks the western advancement of the subtropical high in mid-June 1979. The result has indicated that the effect of the ideal heating source is evident in about 4 days after the inclusion in the high and the circulation at mid-and high-latitudes over the eastern part of China; the disturbance produced over the tropical ocean first transfers towards the northwest along the easterly flow on the southern edge of the subtropical high and then divides into two branches as it moves over the westerly over the mid-latitude area, one continuing the journey northwestward and the other turning to the northeast by east, resulting in changes in the subtropical high and the westerly through combined action.

Feasibility and Diagnostic Accuracy for Assessment of Coronary Artery Stenosis of Prospectively Electrocardiogram-gated High-pitch Spiral Acquisition Mode Dual-source CT Coronary Angiography in Patients with Relatively Higher Heart Rates: in Comparison wit

Objective To prospectively investigate the diagnostic accuracy for coronary artery stenosis of prospectively electrocardiogram-triggered spiral acquisition mode (high pitch mode) dual-source computed tomography coronary angiography (CTCA) in patients with relatively higher heart rates (HR) compared with catheter coronary angiography (CCA). Methods Forty-seven consecutive patients with relatively higher HR (>65 and <100 bpm) (20 male, 27 female; age 55±10 years) who both underwent dual-source CTCA and CCA were prospectively included in this study. All patients were performed CTCA using high pitch mode setting at 20%-30% of the R-R interval for the image acquisition. All coronary segments were evaluated by two blinded and independent observers with regard to image quality on a three-point scale (1: excellent to 3: non-diagnostic) and for the presence of significant coronary stenoses (defined as diameter narrowing exceeding 50%). Considered CCA as the standard of reference, the sensitivity, specificity, positive predictive value and negative predictive value were calculated. Radiation dose values were calculated using the dose-length product. Results Image quality was rated as being score 1 in 92.4% of segments, score 2 in 6.1% of segmentsand score 3 in 1.5% of segments. The average image quality score per segment was 1.064±0.306. The HR variability of patients with image score 1, 2 and 3 were 2.29±1.06 bpm, 5.17±1.37 bpm, 8.88±1.53 bpm, respectively. The average HR variability of patients with different image scores were significantly different (F=170.402, P=0.001). The sensitivity, specificity, positive and negative predictive values were 92.6%, 97.0%, 87.6%, 98.3%, respectively, per segment and 90.0%, 95.2%, 85.3%, 96.9%, respectively, per vessel and 100%, 63.6%, 90.0%, 100%, respectively, per patient. The effective radiation dose was on average 0.86±0.16 mSv. Conclusion In patients with HR more than 65 bpm and below 100 bpm without cardiac arrhythmia, the prospectively electrocardiogram-gated high-pitch spiral acquisition mode with image acquired timing set at 20%-30% of the R-R interval provides a high diagnostic accuracy for the assessment of coronary stenoses combined with a 1.5% of non-diagnostic coronary segments and a radiation dose below 1 mSv.

Non-enhanced Low-tube-voltage High-pitch Dual-source Computed Tomography with Sinogram Affirmed Iterative Reconstruction Algorithm of the Abdomen and Pelvis

Objective To investigate the image quality, radiation dose and diagnostic value of the low-tube-voltage high-pitch dual-source computed tomography(DSCT) with sinogram affirmed iterative reconstruction(SAFIRE) for non-enhanced abdominal and pelvic scans. Methods This institutional review board-approved prospective study included 64 patients who gave written informed consent for additional abdominal and pelvic scan with DSCT in the period from November to December 2012. The patients underwent standard non-enhanced CT scans(protocol 1) [tube voltage of 120 k Vp/pitch of 0.9/filtered back-projection(FBP) reconstruction] followed by high-pitch non-enhanced CT scans(protocol 2)(100 k Vp/3.0/SAFIRE). The total scan time, mean CT number, signal-to-noise ratio(SNR), image quality, lesion detectability and radiation dose were compared between the two protocols. Results The total scan time of protocol 2 was significantly shorter than that of protocol 1(1.4±0.1 seconds vs. 7.6±0.6 seconds, P<0.001). There was no significant difference between protocol 1 and protocol 2 in mean CT number of all organs(liver, 55.4±6.3 HU vs. 56.1±6.8 HU, P=0.214; pancreas, 43.6±5.9 HU vs. 43.7±5.8 HU, P=0.785; spleen, 47.9±3.9 HU vs. 49.4±4.3 HU, P=0.128; kidney, 32.2±2.3 HU vs. 33.1±2.3 HU, P=0.367; abdominal aorta, 44.8±5.6 HU vs. 45.0±5.5 HU, P=0.499; psoas muscle, 50.7±4.1 HU vs. 50.3±4.5 HU, P=0.279). SNR on images of protocol 2 was higher than that of protocol 1(liver, 5.0±1.2 vs. 4.5±1.1, P<0.001; pancreas, 4.0±1.0 vs. 3.6±0.8, P<0.001; spleen, 4.7±1.0 vs. 4.1±0.9, P<0.001; kidney, 3.1±0.6 vs. 2.8±0.6, P<0.001; abdominal aorta, 4.1±1.0 vs. 3.8±1.0, P<0.001; psoas muscle, 4.5±1.1 vs. 4.3±1.2, P=0.012). The overall image noise of protocol 2 was lower than that of protocol1(9.8±3.1 HU vs. 11.1±3.0 HU, P<0.001). Image quality of protocol 2 was good but lower than that of protocol 1(4.1±0.7 vs. 4.6±0.5, P<0.001). Protocol 2 perceived 229 of 234 lesions(97.9%) that were detected in protocol 1 in the abdomen and pelvis. Radiation dose of protocol 2 was lower than that of protocol 1(4.4±0.4 m Sv vs. 7.3±2.4 m Sv, P<0.001) and the mean dose reduction was 41.4%. Conclusion The high-pitch DSCT with SAFIRE can shorten scan time and reduce radiation dose while preserving image quality in non-enhanced abdominal and pelvic scans.

Identification of the lower limit of high-quality source rocks and its relation to hydrocarbon accumulation——Taking the Beier Sag in the Hailaer Basin as an example

The theory of ＂source rock control＂ has evolved from source-rock-control hydrocarbon accumulation, to effective source-rock-control hydrocarbon accumulation, and to high-quality source- rock-control hydrocarbon accumulation. However, there are problems, such as whether high-quality source rocks exist or not？ What high-quality source rocks are, and how to identify them, are yet to be agreed upon. Aimed at this issue of concern to explorationists, and taking the Beier Sag in the Hailaer Basin as an example, this paper defines the high-quality source rocks and the lower limit for evaluation of high-quality source rocks, by using the inflection point on the relationship curve of hydrocarbon （oil） expulsion, which is calculated by the material balance principle, versus total organic carbon （TOC）. The results show that when TOC is low, all source rocks have limited hydrocarbon expulsion and slow growth rate, thus they cannot be high-quality source rocks. However, when TOC rises to some threshold, hydrocarbon expulsion increases significantly with TOC. This inflection point should be the lower limit of high-quality source rocks： those with TOC greater than the inflection-point value are high-quality source rocks. In addition, the lower limit of high-quality source rocks is also related to the type and maturity of organic matters in the source rocks, as well as the mineral components of the source rocks affecting the residual hydrocarbons. Theoretically, the lower limit of high-quality source rocks depends on geological conditions rather than being a constant value. However, for the sake of simplicity and practicability, in this paper TOC=2.0% is regarded as the lower limit of high-quality source rocks. The examination of such standard in the work area indicates that the high-quality source rocks in members K^n2 and K^n~ of the Nantun formation contribute 76% and 82% to oil generation, and 96% and 91% to oil expulsion, respectively. The distribution of high-quality source rocks is also closely related to the distribution of hydrocarbon reservoirs in the region, demonstrating that high-quality source rocks control hydrocarbon accumulation.

Ghost Imaging with High Visibility Using Classical Light Source

We experimentally demonstrate a novel ghost imaging experiment utilizing a classical light source, capable of resolving objects with a high visibility. The experimental results show that our scheme can indeed realize ghost imaging with high visibility for a relatively complicated object composed of three near-ellipse-shaped holes with different dimensions. In our experiment, the largest hole is -36 times of the smMlest one in area. Each of the three holes exhibits high-visibility in excess of 80%. The high visibility and high spatial-resolution advantages of this technique could have applications in remote sensing.

Characteristics and Evaluation of the High-Quality Source Rocks of Cretaceous Continental Shale Oil in Tonghua Basin, China

The presence of shale oil in the Cretaceous Hengtongshan Formation in the Tonghua Basin, drilled by the well TD-01, has been discussed in this geological investigation for the first time. To evaluate the high-quality source rocks of Cretaceous continental shale oil, the distribution characteristics and the evolution of the ancient environment, samples of shale were systematically analyzed in terms of sedimentary facies, organic geochemistry, and organic carbon isotopic composition. The results demonstrate that a TOC value of 1.5% represents the lower-limit TOC value of the high-quality source rocks. Source rocks have an aggregate thickness of 211 m and contain abundant organic matter, with TOC values of 2.69% on average and a maximum value over 5.44%. The original hydrocarbon-generative potential value(S_1+S_2) is between 0.18 mg/g and 6.13 mg/g, and the Ro is between 0.97% and 1.40%. The thermal maturation of the source rocks is relatively mature to highly mature. The δ^(13)C value range is between -34.75‰ and -26.53‰. The ratio of saturated hydrocarbons to aromatic hydrocarbons is 1.55 to 5.24, with an average of 2.85, which is greater than 1.6. The organic types are mainly type Ⅱ_1, followed by type Ⅰ. The organic carbon source was C_3 plants and hydrophytes. The paleoclimate of the Hengtongshan Formation can be characterized as hot and dry to humid, and these conditions were conducive to the development of high-quality source rocks. A favorable paleoenvironment and abundant organic carbon sources provide a solid hydrocarbon generation base for the formation and accumulation of oil and gas in the shale of the Tonghua Basin.

Multilevel Current Source Converters for High Power Medium Voltage Applications

In medium voltage high power applications,multi-level current source converters(CSCs)are good candidate to increase system power region,reliability,and the quality of output waveforms.Compared with widely researched voltage source multi-level converters(MLCs),the current source MLCs have the advantages of inherent short-circuit protection,high power capability and high quality of output current waveforms.The main features of MLCs include reduced harmonics,lower switching frequency and reduced current stress on each device which is a particularly important for high power application with low voltage and high current requirements.This paper conducts a general review of the current research about MLCs in higher power medium voltage application.The different types of parallel structure based MLCs and the modulation methodologies will be introduced and compared.Specifically,the circuit analysis of the common-mode(CM)loop for parallel structures will be conducted,the common-mode voltage(CMV)and circulating current suppression methods developed on the base of multilevel modulations will be addressed.

Electromagnetic Compatibility Analysis of High-Power Pulse Drive Source

Due to the widespread application in recent years, high-power pulse sources have received special attention from large companies and R & D institutions around the world. Compared with foreign mid-range and high-end products, China’s development in this field is relatively lagging behind and lacks mature mid-range and high-end products. The reason is not only because of lack of theoretical support, but more importantly, in the pursuit of indicators and design, the electromagnetic compatibility of the equipment has not been studied thoroughly, resulting in a large degree of distortion in the output waveform, resulting in a reduction in actual value. This paper introduces the sources of high-power pulsed electromagnetic interference of the main driving source, conducts a reasonable high-power electromagnetic compatibility driving source dynamic analysis, and proposes measures to improve electromagnetic compatibility.

Scaling of stress drop and high-frequencyfall-off of source spectra

It has been observed for a long time that the high-frequency fall-off constant of source spectra is about 2 for 'large'earthquakes and about 3 for 'small' earthquakes. For earthquakes between 'large' and 'small', the high-frequencyfall-off constant is not an integer and varies with the size of the earthquake. In this article such a variation is explainedin the perspective of the scaling of stress drop, which proposes a new approach to the study of the scaling of stress dropusing seismic data with lower quality of completeness and high-frequency characteristics. The study on the sourcespectra of the aftershocks of the 1988 Lancang-Gengma, Yunnan, China earthquake shows that the high-frequencyfall-off of source spectra and its variation with the size of earthquake can be well explained by the model that for 'large'earthquakes the stress drop is a constant while for ',small' earthquakes the stress drop increases with the size of theearthquake.

Double-endpoint Genotoxicity Quantification and PAHs Characterization of Drinking Water Source alongside Polluted Yinghe River with High Tumor Mortality

The etiology for the high tumor mortality in heavy polluted Yinghe river basin is still unclear and polycyclic aromatic hydrocarbons(PAHs)belong to the priority pollutants in water based on the former surveillance data.In order to explore the potential genotoxicants contributing to the double-endpoint genotoxicity of polluted drinking water source,12 groundwater and 3 surface water samples were collected from 3 villages and the nearby rivers alongside Yinghe river basin,respectively and their comprehensive genotoxicity was estimated with a bioassay group of sOS/umu test and micronucleus(MN)test(MNT).Some groundwater samples showed positive genotoxicity and all surface water samples were highly genotoxic.Eight groundwater samples showed DNA genotoxic effct with the average 4-NQO equivalent concentration(TEQ_(4-NQO))of 0.067μg/L and 0.089μg/L in wet and dry season,respectively.The average MN ratios of groundwater samples were 14.19‰ and 17.52‰ in wet and dry season,respectively.Groundwater samples showed different genotoxic effect among 3 villages.The total PAHs concentrations in all water samples ranged from 8.98 to 25.17 ng/L with an average of 14.97±4.85 ng/L.BaA,CHR,BkF,BaP and DBA were the main carcinogenic PAHs contributing to the genotoxicity of water samples.In conclusion,carcinogenic PAHs are possibly related to the high tumor mortality in the target area.Characterization of carcinogenic PAHs to genotoxicity of drinking water source may shed light on the etiology study for high tumor mortality in Yinghe river basin.Key words:genotoxicity test;drinking water source;high tumor mortality;Yinghe river basin;polycyclic aromatic hydrocarbons(PAHs)