Modification of streamer-to-leader transition model based on radial thermal expansion in the sphere-plane gap discharge at high altitude

Historically,streamer-to-leader transition studies mainly focused on the rod-plane gap and low altitude analysis,with limited attention paid to the sphere-plane gap at high altitude analysis.In this work,sphere-plane gap discharge tests were carried out under the gap distance of 5 m at the Qinghai Ultra High Voltage(UHV)test base at an altitude of 2200 m.The experiments measured the physical parameters such as the discharge current,electric field intensity and instantaneous optical power.The duration of the dark period and the critical charge of streamer-toleader transition were obtained at high altitude.Based on radial thermal expansion of the streamer stem,we established a modified streamer-to-leader transition model of the sphere-plane gap discharge at high altitude,and calculated the stem temperature,stem radii and the duration of streamer-to-leader transition.Compared with the measured duration of sphere-plane electrode discharge at an altitude of 2200 m,the error rate of the modified model was 0.94%,while the classical model was 6.97%,demonstrating the effectiveness of the modified model.From the comparisons and analysis,several suggestions are proposed to improve the numerical model for further quantitative investigations of the leader inception.

Dexmedetomidine Attenuates High Glucose-induced HK-2 Epithelial-mesenchymal Transition by Inhibiting AKT and ERK

Objective To explore the protective effects of dexmedetomidine(Dex)against high glucose-induced epithelial-mesenchymal transition in HK-2 cells and relevant mechanisms.Methods HK-2 cells were exposed to either glucose or glucose+Dex for 6 h.The production of ROS,morphology of HK-2 cells,and cell cycle were detected.Moreover,the expression of AKT,p-AKT,ERK,pERK,PI3 K,E-Cadherin,Claudin-1,andα-SMA were determined and compared between HK-2 cells exposed to glucose and those exposed to both glucose and Dex with or without PI3 K/AKT pathway inhibitor LY294002 and ERK pathway inhibitor U0126.Results Compared with HK-2 cells exposed to high level of glucose,the HK-2 cells exposed to both high level of glucose and Dex showed:(1)lower level of ROS production;(2)cell morphology was complete;(3)more cells in G1 phase;(4)lower expression of p-AKT,p-ERK andα-SMA,higher expression of ECadherin and Claudin-1.PI3 K/AKT inhibitor LY294002 and ERK inhibitor U0126 decreased the expression of p-AKT,p-ERK andα-SMA,and increased the expression of E-Cadherin and Claudin-1.Conclusion Dex can attenuate high glucose-induced HK-2 epithelial-mesenchymal transition by inhibiting AKT and ERK.

Pressure-induced structural,electronic,and superconducting phase transitions in TaSe_(3)

TaSe_(3)has garnered significant research interests due to its unique quasi-one-dimensional crystal structure,which gives rise to distinctive properties.Using crystal structure search and first-principles calculations,we systematically investigated the pressure-induced structural and electronic phase transitions of quasi-one-dimensional TaSe_(3)up to 100 GPa.In addition to the ambient pressure phase(P2_(1)/m-I),we identified three high-pressure phases:P2_(1)/m-II,Pnma,and Pmma.For the P2_(1)/m-I phase,the inclusion of spin-orbit coupling(SOC)results in significant SOC splitting and changes in the band inversion characteristics.Furthermore,band structure calculations for the three high-pressure phases indicate metallic natures,and the electron localization function suggests ionic bonding between Ta and Se atoms.Our electron-phonon coupling calculations reveal a superconducting critical temperature of approximately 6.4 K for the Pmma phase at 100 GPa.This study provides valuable insights into the high-pressure electronic behavior of quasi-one-dimensional TaSe_(3).

Pressure-induced magnetic phase and structural transition in SmSb_(2)

Motivated by the recent discovery of unconventional superconductivity around a magnetic quantum critical point in pressurized CeSb_(2),here we present a high-pressure study of an isostructural antiferromagnetic(AFM) SmSb_(2) through electrical transport and synchrotron x-ray diffraction measurements.At P_(C)~2.5 GPa,we found a pressure-induced magnetic phase transition accompanied by a Cmca→P4/nmm structural phase transition.In the pristine AFM phase below P_(C),the AFM transition temperature of SmSb_(2) is insensitive to pressure;in the emergent magnetic phase above P_(C),however,the magnetic critical temperature increases rapidly with increasing pressure.In addition,at ambient pressure,the magnetoresistivity(MR) of SmSb_(2) increases suddenly upon cooling below the AFM transition temperature and presents linear nonsaturating behavior under high field at 2 K.With increasing pressure above P_(C),the MR behavior remains similar to that observed at ambient pressure,both in terms of temperature-and field-dependent MR.This leads us to argue an AFM-like state for SmSb_(2) above P_(C).Within the investigated pressure of up to 45.3 GPa and the temperature of down to 1.8 K,we found no signature of superconductivity in SmSb_(2).

Unveiling the pressure-driven metal–semiconductor–metal transition in the doped TiS_(2)

Conventional theories expect that materials under pressure exhibit expanded valence and conduction bands,leading to increased electrical conductivity.Here,we report the electrical properties of the doped 1T-TiS_(2) under high pressure by electrical resistance investigations,synchrotron x-ray diffraction,Raman scattering and theoretical calculations.Up to 70 GPa,an unusual metal-semiconductor-metal transition occurs.Our first-principles calculations suggest that the observed anti-Wilson transition from metal to semiconductor at 17 GPa is due to the electron localization induced by the intercalated Ti atoms.This electron localization is attributed to the strengthened coupling between the doped Ti atoms and S atoms,and the Anderson localization arising from the disordered intercalation.At pressures exceeding 30.5 GPa,the doped TiS_(2) undergoes a re-metallization transition initiated by a crystal structure phase transition.We assign the most probable space group as P2_(1)2_(1)2_(1).Our findings suggest that materials probably will eventually undergo the Wilson transition when subjected to sufficient pressure.

Effects of grinding-induced grain boundary and interfaces on electrical transportation and structure phase transition in ZnSe under high pressure

Interface and scale effects are the two most important factors which strongly affect the structure and the properties of nano-/micro-crystals under pressure.We conduct an experiment under high pressure in situ alternating current impedance to elucidate the effects of interface on the structure and electrical transport behavior of two Zn Se samples with different sizes obtained by physical grinding.The results show that（i） two different-sized Zn Se samples undergo the same phase transitions from zinc blend to cinnabar-type phase and then to rock salt phase;（ii） the structural transition pressure of the859-nm Zn Se sample is higher than that of the sample of 478 nm,which indicates the strong scale effect.The pressure induced boundary resistance change is obtained by fitting the impedance spectrum,which shows that the boundary conduction dominates the electrical transport behavior of Zn Se in the whole experimental pressure range.By comparing the impedance spectra of two different-sized Zn Se samples at high pressure,we find that the resistance of the 478-nm Zn Se sample is lower than that of the 859-nm sample,which illustrates that the sample with smaller particle size has more defects which are due to physical grinding.

Recent Developments of Transition Metal Compounds-Carbon Hybrid Electrodes for High Energy/Power Supercapacitors

Due to their rapid power delivery,fast charging,and long cycle life,supercapacitors have become an important energy storage technology recently.However,to meet the continuously increasing demands in the fields of portable electronics,transportation,and future robotic technologies,supercapacitors with higher energy densities without sacrificing high power densities and cycle stabilities are still challenged.Transition metal compounds(TMCs)possessing high theoretical capacitance are always used as electrode materials to improve the energy densities of supercapacitors.However,the power densities and cycle lives of such TMCs-based electrodes are still inferior due to their low intrinsic conductivity and large volume expansion during the charge/discharge process,which greatly impede their large-scale applications.Most recently,the ideal integrating of TMCs and conductive carbon skeletons is considered as an effective solution to solve the above challenges.Herein,we summarize the recent developments of TMCs/carbon hybrid electrodes which exhibit both high energy/power densities from the aspects of structural design strategies,including conductive carbon skeleton,interface engineering,and electronic structure.Furthermore,the remaining challenges and future perspectives are also highlighted so as to provide strategies for the high energy/power TMCs/carbon-based supercapacitors.

On the high conductive layer near the Moho and the transitional zone between the crust and mantle in Tianshui region

On the basis of MTS and DSS data in and near Tianshui region,the deep structure contour of the region was expounded.The regional distribution of the high conductive layer near the Moho in the region becomes one of the most obvious characters of the conductivity structure in the crust and mantle,and it is corresponding to the low S wave velocity zone near the Moho and is guessed as the transitional zone between the crust and mantle in the region.In this paper,the behaviour of medium and the thermodynamic circumstance of the conductive low shear velocity layer near the Moho were demonstrated emphatically,and the cause of formation of the layer was roughly explained under specified conditions of geographical environment and deep structure characters in this region.

Compression behavior and phase transition of β-Si_3N_4 under high pressure

The compressibility and pressure-induced phase transition of β-Si3N4 were investigated by using an angle dispersive x-ray diffraction technique in a diamond anvil cell at room temperature. Rietveld refinements of the x-ray powder diffraction data verified that the hexagonal structure（with space group P63/m, Z = 2 formulas per unit cell） β-Si3N4 remained stable under high pressure up to 37 GPa. Upon increasing pressure, β-Si3 N4 transformed to δ-Si3N4 at about 41 GPa. The initial β-Si3N4 was recovered as the pressure was released to ambient pressure, implying that the observed pressureinduced phase transformation was reversible. The pressure–volume data of β-Si3N4 was fitted by the third-order Birch–Murnaghan equation of state, which yielded a bulk modulus K0= 273（2） GPa with its pressure derivative K0= 4（fixed）and K0= 278（2） GPa with K 0= 5. Furthermore, the compressibility of the unit cell axes（a and c-axes） for the β-Si3N4 demonstrated an anisotropic property with increasing pressure.

High-pressure investigations on the isostructural phase transition and metallization in realgar with diamond anvil cells

The high-pressure structural,vibrational and electrical properties for realgar were investigated by in-situ Raman scattering and electrical conductivity experiments combined with first-principle calculations up to~30.8 GPa.It was verified that realgar underwent an isostructural phase transition at~6.3 GPa and a metallization at a higher pressure of~23.5 GPa.The isostructural phase transition was well evidenced by the obvious variations of Raman peaks,electrical conductivity,crystal parameters and the As–S bond length.The phase transition of metallization was in closely associated with the closure of bandgap rather than caused by the structural phase transition.And furthermore,the metallic realgar exhibited a relatively low compressibility with the unit cell volume V_(0)=718.1.4Å^(3)and bulk modulus B_(0)=36.1 GPa.

Multiple transition metals modulated hierarchical networks for high performance of metal-ion batteries

Searching anodes with excellent electrochemical performance has been in great demand for rechargeable metal ion batteries. In this contribution, Fe/Co co-doped Ni S with N-based carbon(Fe Co-NiS@NC) derived from trimetallic Prussian blue analogue is designed and synthesized. The composition can be easily adjusted and modulated by multi-metals. In addition, the well-designed carbon nanocubes effectively promote electronic conductivity and buffer the volume change upon charge and discharge cycling, resulting in good capacity and long-term cycle life for both lithium-ion batteries and sodium-ion batteries, with capacities of 1018 m Ah g^(-1)(vs. Li/Li^(+)) and 454 m Ah g^(-1)(vs. Na/Na^(+)), respectively, after 100 cycles.Kinetics studies indicate that the electrochemical behaviors are manipulated by both diffusion and pseudocapacitance processes. These strategies would open new opportunities and potention for novel energy storage.

High pressure structural phase transitions of TiO_2 nanomaterials

Recently, the high pressure study on the TiO_2 nanomaterials has attracted considerable attention due to the typical crystal structure and the fascinating properties of TiO_2 with nanoscale sizes. In this paper, we briefly review the recent progress in the high pressure phase transitions of TiO_2 nanomaterials. We discuss the size effects and morphology effects on the high pressure phase transitions of TiO_2 nanomaterials with different particle sizes, morphologies, and microstructures. Several typical pressure-induced structural phase transitions in TiO_2 nanomaterials are presented, including size-dependent phase transition selectivity in nanoparticles, morphology-tuned phase transition in nanowires, nanosheets,and nanoporous materials, and pressure-induced amorphization（PIA） and polyamorphism in ultrafine nanoparticles and TiO_2-B nanoribbons. Various TiO_2 nanostructural materials with high pressure structures are prepared successfully by high pressure treatment of the corresponding crystal nanomaterials, such as amorphous TiO_2 nanoribbons, α-PbO_2-type TiO_2 nanowires, nanosheets, and nanoporous materials. These studies suggest that the high pressure phase transitions of TiO_2 nanomaterials depend on the nanosize, morphology, interface energy, and microstructure. The diversity of high pressure behaviors of TiO_2 nanomaterials provides a new insight into the properties of nanomaterials, and paves a way for preparing new nanomaterials with novel high pressure structures and properties for various applications.

Structural transitions in NaNH2 via recrystallization under high pressure

Multiple phase transitions are detected in sodium amide(NaNH2), an important hydrogen storage material, upon compression in diamond anvil cells(DAC) by using Raman spectroscopy and x-ray diffraction(XRD) measurements.Additional Bragg reflections appear on lower and higher angle sides of the original ones at ~1.07 GPa and 1.84 GPa,accompanied by obvious changes in Raman spectroscopy, respectively.It reveals that NaNH2 undergoes the high-pressure phase sequence(α-β-γ) up to 20 GPa at room temperature.Spectral analysis indicates an orthorhombic structure with PBAN space group for the γ phase.We also experimentally observe high pressure induced recrystallization in alkaline amide compounds for the first time.

Semiconductor–metal transition in GaAs nanowires under high pressure

We investigate the structural phase transitions and electronic properties of GaAs nanowires under high pressure by using synchrotron x-ray diffraction and infrared reflectance spectroscopy methods up to 26.2 GPa at room temperature.The zinc-blende to orthorhombic phase transition was observed at around 20.0 GPa.In the same pressure range, pressureinduced metallization of GaAs nanowires was confirmed by infrared reflectance spectra.The metallization originates from the zinc-blende to orthorhombic phase transition.Decompression results demonstrated that the phase transition from zincblende to orthorhombic and the pressure-induced metallization are reversible.Compared to bulk materials, GaAs nanowires show larger bulk modulus and enhanced transition pressure due to the size effects and high surface energy.

Structures and phase transitions of ScH_3 under high pressure

The structures and the phase transitions of ScH3 under high pressure are investigated using first-principles calcula- tions. The calculated structural parameters at zero pressure agree well with the available experimental data. With increasing pressure, the transition sequence hcp （GdHa-type）→ C2/m →fcc→4hcp （YH3-type）→Cmcm of ScH3 is predicted first; the corresponding transition pressures at 0 K are 23 GPa, 25 GPa, 348 GPa, and 477 GPa, respectively. The C2/m symmetry structure is a possible candidate but not a good one as the intermediate state from hexagonal to cubic in ScH3. On the other hand, via the analysis of the structures of hexagonal SCH2.9, cubic ScH3, and cubic ScH2, we find that the repulsive interactions of H-H atoms must play an important role in the transition from hexagonal to cubic.

Phase transition model of water flow irradiated by high-energy laser in a chamber

In the absorption chamber of a high-energy laser energy meter, water is directly used as an absorbing medium and the interaction of the high-power laser and the water flow can produce a variety of physical phenomena such as phase transitions. The unit difference method is adopted to deduce the phase transition model for water flow irradiated by a high-energy laser. In addition, the model is simulated and verified through experiments. Among them, the experimental verification uses the photographic method, shooting the distribution and the form of the air mass of water flow in different operating conditions, which are compared with the simulation results. The research shows that it is achievable to reduce the intensity of the phase transition by increasing the water flow, reducing the power intensity of the beam, shortening the distance the beam covers, reducing the initial water temperature or adopting a shorter wavelength laser. The study＇s results will provide the reference for the design of a water-direct-absorption-type high-energy laser energy meter as well as an analysis of the interaction processes of other similar high-power lasers and water flow.

Experimental Observation of Phase Transition in Sb203 under High Pressure

The in situ high-pressure behavior of the semiconductor antimony trioxide （Sb2O3） iS investigated by the Raman spectroscopy techniques and angle-dispersive synchrotron x-ray powder diffractfon in a diamond anvil cell up to 31.5 and 30.7 GPa, respectively. New peaks observed in the external lattice mode range in the Raman spectra at 13.5 GPa suggest that the structural phase transition occurs. The group mode （140 cm^-1） in Sb2O3 exhibits anomalous pressure dependence; that is, the frequency decreases gradually with the increasing pressure. High pressure synchrotron x-ray diffraction measurements at room temperature reveal that the transition from the orthorhombic structure to high-pressure new phase occurs at about 14.2 GPa, corresponding to the softening of the group optic mode （140cm^-1）.

Equal compressibility structural phase transition of molybdenum at high pressure

We have studied the high-pressure compression behavior of molybdenum up to 60 GPa by synchrotron radial x-ray diffraction(RXRD)in a diamond anvil cell(DAC).It is found that all diffraction peaks of molybdenum undergo a split at around 27 GPa,and we believe that a phase transition from a body-centered cubic structure to a rhombohedral structure at room pressure has occurred.The slope of pressure–volume curve shows continuity before and after this phase transition,when fitting the pressure–volume curves of the body-centered cubic structure at low pressure and the rhombohedral structure at high pressure.A bulk modulus of 261.3(2.7)GPa and a first-order derivative of the bulk modulus of 4.15(0.14)are obtained by using the nonhydrostatic compression data at the angleψ=54.7°between the diffracting plane normal and stress axis.

Structural Phase Transitions of ZnTe under High Pressure Using Experiments and Calculations

The pressure-induced structural transitions of ZnTe are investigated at pressures up to 59.2 GPa in a diamond anvil cell by using synchrotron powder x-ray diffraction method. A phase transition from the initial zinc blende （ZB, ZnTe-Ⅰ） structure to a cinnabar phase （ZnTe-Ⅱ） is observed at 9.6 GPa, followed by a high pressure orthorhombic phase （ZnTe-Ⅲ） with Cmcm symmetry at 12.1 GPa. The ZB, cinnabar （space group P3121）, Cmcm, P31 and rock salt structures of ZnTe are investigated by using density functional theory calculations. Based on the experiments and calculations, the ZnTe-Ⅱ phase is determined to have a cinnabar structure rather than a P3 1 symmetry.

Electrical Neutrality and Symmetry Restoring Phase Transitions at High Density in a Two-Flavor Nambu-Jona-Lasinio Model

A general research on chiral symmetry restoring phase transitions at zero temperature and finite chemical potentials under electrical neutrality condition has been conducted in a Nambu-Jona-Lasinio model to describe twoflavor normal quark matter. Depending on whether mo/A, the ratio of dynamical quark mass in vacuum and the 3D momentum cutoff in the loop integrals, is less or greater than 0.413, the phase transition will be of the second or first order. A complete phase diagram of u quark chemical potential versus mo is given. With the electrical neutrality constraint, the region where the second order phase transition happens will be wider than the one without electrical neutrality limitation. The results also show that, for the value ofmo/A from QCD phenomenology, the phase transition must be of the first order.