The temperature of bush inner surface temperature is measured by using infrared thermometer and transparent bearing,and temperature rise is measured by using thermocouple. The influence of rotating speed and axial loc...The temperature of bush inner surface temperature is measured by using infrared thermometer and transparent bearing,and temperature rise is measured by using thermocouple. The influence of rotating speed and axial location on the bush inner surface temperature is studied,and the influence of supply pressure and rotating speed on the temperature rise is analyzed. The results show the bush inner surface temperature and temperature rise of spiral oil wedge hydrodynamic bearing increase with the increase of rotation speed. In axial direction,the temperature is higher around the oil return hole. The temperature rise decreases with the increase of supply pressure. The highest temperature of bush inner surface and temperature rise are higher at higher speed,so the temperature rise is the fundamental reason which restricts the increase of rotation speed for high speed sleeve bearing.展开更多
In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-wa...In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-water heat exchange system is used for cooling the spindle motor.The spindle is supported by Si_4N_3 ceramic ball angular contact bearings. An oil-air lubricator is used to lubricate and cool the spindle bearings.Some special structures are taken for balancing the spindle.展开更多
On a self-made super-high shear strain rate rheometer, the rheological characteristics and apparent viscosity curves of a high-speed bearing grease were obtained under different working conditions. A new grease rheolo...On a self-made super-high shear strain rate rheometer, the rheological characteristics and apparent viscosity curves of a high-speed bearing grease were obtained under different working conditions. A new grease rheological model suited to a shear strain rate range of 0—3.5×10~6s^(-1) was presented. The results showed that the shear stress increased linearly at first and then increased nonlinearly with the increase in shear strain rate up to 1.5×10~6s^(-1), and finally the shear stress decreased slightly with the successive increase in shear strain rate. The shear stress increased with a decreasing rolling speed and an increasing contact pressure. The apparent viscosity decreased rapidly with the increase of shear strain rate at beginning and could approach the viscosity of the base oil if the shear strain rate surpassed 1.5×10~6s^(-1). The fits between the test data and the predicted values by the new model were fairly good.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51305242)the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents(Grant No.2013RCJJ014)
文摘The temperature of bush inner surface temperature is measured by using infrared thermometer and transparent bearing,and temperature rise is measured by using thermocouple. The influence of rotating speed and axial location on the bush inner surface temperature is studied,and the influence of supply pressure and rotating speed on the temperature rise is analyzed. The results show the bush inner surface temperature and temperature rise of spiral oil wedge hydrodynamic bearing increase with the increase of rotation speed. In axial direction,the temperature is higher around the oil return hole. The temperature rise decreases with the increase of supply pressure. The highest temperature of bush inner surface and temperature rise are higher at higher speed,so the temperature rise is the fundamental reason which restricts the increase of rotation speed for high speed sleeve bearing.
基金This project is supported by National Natural Science Foundation of China(59575063), the Provincial Natural Science Foundation o
文摘In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-water heat exchange system is used for cooling the spindle motor.The spindle is supported by Si_4N_3 ceramic ball angular contact bearings. An oil-air lubricator is used to lubricate and cool the spindle bearings.Some special structures are taken for balancing the spindle.
基金financially supported by the National Natural Science Foundation of China (No. 51475143)the Tianjin Natural Science Foundation (No.16JCYBJC18900)
文摘On a self-made super-high shear strain rate rheometer, the rheological characteristics and apparent viscosity curves of a high-speed bearing grease were obtained under different working conditions. A new grease rheological model suited to a shear strain rate range of 0—3.5×10~6s^(-1) was presented. The results showed that the shear stress increased linearly at first and then increased nonlinearly with the increase in shear strain rate up to 1.5×10~6s^(-1), and finally the shear stress decreased slightly with the successive increase in shear strain rate. The shear stress increased with a decreasing rolling speed and an increasing contact pressure. The apparent viscosity decreased rapidly with the increase of shear strain rate at beginning and could approach the viscosity of the base oil if the shear strain rate surpassed 1.5×10~6s^(-1). The fits between the test data and the predicted values by the new model were fairly good.