A foundry research project has been recently initiated at RTIT in order to better understand the fabrication of as-cast heavy section DI parts meeting high impact energy requirements at low temperatures.The experiment...A foundry research project has been recently initiated at RTIT in order to better understand the fabrication of as-cast heavy section DI parts meeting high impact energy requirements at low temperatures.The experimental castings have the following dimensions 180 mm x 180 mm x 190 mm.The achieved as-cast Charpy impact strengths were as follows:17 J (RT),16 J (-20℃) and 11 J (-40℃).The foundry process,the chemical composition and the microstructure of this experimental casting are compared to the ones of various examples in order to show the detrimental effects of residual elements,microshrinkage and microcarbide on the impact properties.Finally,quality index empirical models (based on casting chemical compositions) are used to analyse the impact tests results.This paper illustrates that an adequate nodule count can contribute to reducing the detrimental effects of the residual elements and microsegregation.展开更多
To develop a high performance gray cast iron with high tensile strength and thermal conductivity, multivariable analysis of microstructural effects on properties of gray cast iron was performed. The concerned paramete...To develop a high performance gray cast iron with high tensile strength and thermal conductivity, multivariable analysis of microstructural effects on properties of gray cast iron was performed. The concerned parameters consisted of graphite content, maximum graphite length, primary dendrite percentage and microhardness of the matrix. Under the superposed influence of various parameters, the relationships between thermal conductivity and structural characteristics become irregular, as well as the effects of graphite length on the strength. An adaptive neuro-fuzzy inference system was built to link the parameters and properties. A sensitivity test was then performed to rank the relative impact of parameters. It was found that the dominant parameter for tensile strength is graphite content, while the most relative parameter for thermal conductivity is maximum graphite length. The most effective method to simultaneously improve the tensile and thermal conductivity of gray cast iron is to reduce the carbon equivalent and increase the length of graphite flakes.展开更多
In high-temperature applications,like exhaust manifolds,cast irons with a ferritic matrix are mostly used.However,the increasing demand for higher-temperature applications has led manufacturers to use additional expen...In high-temperature applications,like exhaust manifolds,cast irons with a ferritic matrix are mostly used.However,the increasing demand for higher-temperature applications has led manufacturers to use additional expensive materials such as stainless steels and Ni-resist austenitic ductile cast irons.Thus,in order to meet the demand while using low-cost materials,new alloys with improved high-temperature strength and oxidation resistance must be developed.In this study,thermodynamic calculations with Thermo-Calc software were applied to study a novel ductile cast iron with a composition of 3.5wt%C,4wt%Si,1wt%Nb,0‒4wt%Al.The designed compositions were cast,and thermal analysis and microstructural characterization were performed to validate the calculations.The lowest critical temperature of austenite to pearlite eutectoid transformation,i.e.,A1,was calculated,and the solidification sequence was determined.Both calculations and experimental data revealed the importance of aluminum addition,as the A1 increased by increasing the aluminum content in the alloys,indicating the possibility of utilizing the alloys at higher temperature.The experimental data validated the transformation temperature during solidification and at the solid state and confirmed the equilibrium phases at room temperature as ferrite,graphite,and MC-type carbides.展开更多
文摘A foundry research project has been recently initiated at RTIT in order to better understand the fabrication of as-cast heavy section DI parts meeting high impact energy requirements at low temperatures.The experimental castings have the following dimensions 180 mm x 180 mm x 190 mm.The achieved as-cast Charpy impact strengths were as follows:17 J (RT),16 J (-20℃) and 11 J (-40℃).The foundry process,the chemical composition and the microstructure of this experimental casting are compared to the ones of various examples in order to show the detrimental effects of residual elements,microshrinkage and microcarbide on the impact properties.Finally,quality index empirical models (based on casting chemical compositions) are used to analyse the impact tests results.This paper illustrates that an adequate nodule count can contribute to reducing the detrimental effects of the residual elements and microsegregation.
文摘To develop a high performance gray cast iron with high tensile strength and thermal conductivity, multivariable analysis of microstructural effects on properties of gray cast iron was performed. The concerned parameters consisted of graphite content, maximum graphite length, primary dendrite percentage and microhardness of the matrix. Under the superposed influence of various parameters, the relationships between thermal conductivity and structural characteristics become irregular, as well as the effects of graphite length on the strength. An adaptive neuro-fuzzy inference system was built to link the parameters and properties. A sensitivity test was then performed to rank the relative impact of parameters. It was found that the dominant parameter for tensile strength is graphite content, while the most relative parameter for thermal conductivity is maximum graphite length. The most effective method to simultaneously improve the tensile and thermal conductivity of gray cast iron is to reduce the carbon equivalent and increase the length of graphite flakes.
基金financial support given by Scientific Research Projects Coordination Unit of Kocaeli University under the project No. 2017/118
文摘In high-temperature applications,like exhaust manifolds,cast irons with a ferritic matrix are mostly used.However,the increasing demand for higher-temperature applications has led manufacturers to use additional expensive materials such as stainless steels and Ni-resist austenitic ductile cast irons.Thus,in order to meet the demand while using low-cost materials,new alloys with improved high-temperature strength and oxidation resistance must be developed.In this study,thermodynamic calculations with Thermo-Calc software were applied to study a novel ductile cast iron with a composition of 3.5wt%C,4wt%Si,1wt%Nb,0‒4wt%Al.The designed compositions were cast,and thermal analysis and microstructural characterization were performed to validate the calculations.The lowest critical temperature of austenite to pearlite eutectoid transformation,i.e.,A1,was calculated,and the solidification sequence was determined.Both calculations and experimental data revealed the importance of aluminum addition,as the A1 increased by increasing the aluminum content in the alloys,indicating the possibility of utilizing the alloys at higher temperature.The experimental data validated the transformation temperature during solidification and at the solid state and confirmed the equilibrium phases at room temperature as ferrite,graphite,and MC-type carbides.
