Decyloxyphenyl-substituted Quinoxaline-embedded Conjugated Electrochromic Polymers with High Switching Stability and Fast Response Speed

Two novel decyloxyphenylquinoxaline-based donor-acceptor （D-A） electroactive monomers bearing dialkoxythiophene as the donor unit are synthesized using Stille coupling reaction. The corresponding polymers, poly[2,3- bis（4-decyloxyphenyl）-5,8-bis（3,4-dimethoxylthiophen-2-yl）quinoxaline] （P1） and poly[2,3-bis（4-decyloxyphenyl）-5,8- bis（2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl）quinoxaline] （P2）, are directly deposited onto the working electrode surface by electropolymerization. All materials were characterized by nuclear magnetic resonance （NMR）, mass spectrometry （MS）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, ultraviolet-visible absorption spectrometry （UV-Vis） and spectro-electrochemical measurements. Electrochemical studies demonstrate that both polymers are capable of showing both reasonable n- and p-doping processes, and advanced long-term switching stabilities. 3,4-Ethylenedioxythiophene substituted for 3,4-dimethoxythiophene as a donor unit, which enhances the conjugated double-bond character of the conducting polymer, thus leading to a lower electronic band-gap. Likewise, the neutral state color of the synthesized polymer tuned from blue to blue-green corresponding to the red shift of the maximum absorption wavelengths in the visible region. In addition, kinetics study of P1 revealed 42% （595 nm）, 30% （839 nm） and 69% （1500 nm） transmittance changes （A7%）, while P2 exhibited 32% （740 nm）, 71% （2000 nm） at the dominant wavelengths. It was also observed that both films could switch quickly between the neutral state and oxidation state, with the response time less than 1 s both in visible and near infrared regions.

Electrode Erosion of a High Energy Impulse Spark Gap Switch

Based on the principle of thermal conduction, three metal alloys （stainless steel, copper-tungsten and graphite） were chosen as the material of the high impulse current discharging switch. Experimental results indicate that the mass loss and surface erosion morphology of the electrode are related with the electrode material （conductivity σ, melting point Tin, density p and thermal capacity c） and the impulse transferred charge （or energy） per impulse for the same total impulse transferred charge. The experimental results indicate that the mass loss of stainless steel, copper-tungsten and graphite are 380.10 μg/C, 118.10 μg/C and 81.90 μg/C respectively under the condition of a total impulse transferred charge of 525 C and a transferred charge per impulse of 10.5 C. Under the same impulse transferred charge, the mass loss of copper-tungsten（118.10 μg/C） with the transferred charge per impulse at 10.5 C is far larger than the mass loss （38.61μg/C） at a 1.48 C transferred charge per impulse. The electrode erosion mechanism under high energy impulse arcs is analyzed briefly and it is suggested that by selecting high conductive metal or metal alloy as the electrode material of a high energy impulse spark gap switch and setting high erosion resistance material at the top of the electrode, the mass loss of the electrode can be reduced and the life of the switch prolonged.

High-power High-efficient and Simplified High-frequency Switching Power Supply for Electrolytic Plating

针对大功率电解电镀开关电源的输入整流级引起的无功和谐波等电能质量问题,研究了一种基于高效PWM整流的高频开关电源。该电源前级整流器仅用4个开关管来进行PWM整流,后级采用半桥逆变器进行高频变换,显著减少了开关数量。针对三相四开关PWM整流器,推导一种基于开关模型的无差拍控制方法,该方法可实现系统的快速、无差整流。针对多台开关电源的并联均流问题,提出一种基于虚拟阻抗的自均流控制方法,可实现多台电源的均流稳定运行。通过仿真与实验验证了所提结构和控制方法的正确性。

Analysis of Fault Arc in High-Speed Switch Applied in Hybrid Circuit Breaker

The behavior of fault arc in a high-speed switch （HSS） has been studied theoretically and experimentally. A simplified HSS setup is designed to support this work. A two-dimensional arc model is developed to analyze the characteristics of fault arc based on magnetic-hydrodynamic （MHD） theory. The advantage of such a model is that the thermal transfer coefficient can be determined by depending on the numerical method alone. The influence of net emission coefficients （NEC） radiation model and P1 model on fault arc is analyzed in detail. Results show that NEC model predicts more radiation energy and less pressure rise without the re-absorption effect considered. As a consequence, P1 model is more suitable to calculate the pressure rise caused by fault arc. Finally, the pressure rise during longer arcing time for different arc currents is predicted.

Design and Implementation of Dynamic High-Speed Switches in Super Base Station Architectures

Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dynamic high-speed interconnections between baseband units(BBUs)and remote radio heads(RRHs)is vital in centralized base station design.Herein,dynamic high-speed switches(HSSs)connecting BBUs and RRHs were designed for a centralized base station architecture.We analyzed the characteristics of actual traffic and introduced a switch traffic model suitable for the super base station architecture.Then,we proposed a data-priority-aware(DPA)scheduling algorithm based on the traffic model.Lastly,we developed the dynamic HSS model based on the OPNET platform and the prototype based on FPGA.Our results show that the DPA achieves close to 100%throughput with lower latency and provides better run-time complexity than iOCF and HE-iSLIP,thereby demonstrating that the proposed switch system can be adopted in centralized base station architectures.

Analysis of Soft-Switched High Frequency AC-AC Converter for Induction Motor Drive

The systematic mathematical analysis of the high frequency soft-switched AC-AC converter is proposed for variable frequency induction machine load in this paper. Both PWM and square-wave modes of operation have been considered. The frequency relation and phase unbalance problem due to discrete time integral half-cycle switching has been discussed in the beginning. Then, generalized Fourier series have been derived for output voltage, output current and supply current in two modes.The analytical results help to understand tbe converter characteristics, design optimally a convertermachine system of arbitrary capacity considering the various trade-off parameters.

Characteristics of SF_6 Switch with a Small Gap under High Pressure and Nanosecond Pulse

Structural design and tests on the characteristics of the SF6 gas switch with a small gap are presented. This kind of switch often works under high pressure and nanosecond pulse for getting pulse with faster risetime. The breakdown voltage and breakdown delay of a number of switches with different geometries, gas pressures and pulse waveforms were investigated. Experimental results suggested that the breakdown voltage increases linearly with the gas pressure, and the breakdown delay decreases with an increase in the gas pressure and a reduction in the gap distance of the switch under the same applied pulse. By using this kind of switch with a gap of 3 mm as a peaking switch, a pulse generator can provide an output voltage with a peak voltage of 300 kV and a risetime of 3 ns on a resistance load of 150Ω.

A Switching Method for a Model Reference Robust Control with Unknown High Frequency Gain Sign

The problem of controlling a single-input-single-output plant without prior knowledge of high frequency gain sign is addressed by using the model reference robust control approach.A switching method is proposed based on a monitoring function so that after a finite number of swi- tchings the tracking error converges to zero exponentially.Furthermore,it is shown that if some initial states of the closed-loop system are zero,only one switching is needed.

Hybrid Predictive Control Based on High-Order Differential State Observers and Lyapunov Functions for Switched Nonlinear Systems

In this paper, a hybrid predictive controller is proposed for a class of uncertain switched nonlinear systems based on high-order differential state observers and Lyapunov functions. The main idea is to design an output feedback bounded controller and a predictive controller for each subsystem using high-order differential state observers and Lyapunov functions, to derive a suitable switched law to stabilize the closed-loop subsystem, and to provide an explicitly characterized set of initial conditions. For the whole switched system, based on the high-order differentiator, a suitable switched law is designed to ensure the whole closed-loop’s stability. The simulation results for a chemical process show the validity of the controller proposed in this paper.

Fast-transient techniques for high-frequency DC–DC converters

A 30 MHz voltage-mode controlled buck converter with fast transient responses is presented.An improved differential difference amplifier(DDA)-based Type-III compensator is proposed to reduce the settling times of the converter during load transients,and to achieve near-optimal transient responses with simple PWM control only.Moreover,a hybrid scheme using a digital linear regulator with automatic transient detection and seamless loop transition is proposed to further improve the transient responses.By monitoring the output voltage of the compensator instead of the output voltage of the converter,the proposed hybrid scheme can reduce undershoot and overshoot effectively with good noise immunity and without interrupting the PWM loop.The converter was fabricated in a 0.13μm standard CMOS process using 3.3 V devices.With an input voltage of 3.3 V,the measured peak efficiencies at the output voltages of 2.4,1.8,and 1.2 V are 90.7%,88%,and 83.6%,respectively.With a load step of 1.25 A and rise and fall times of 2 ns,the measured 1%settling times were 220 and 230 ns,with undershoot and overshoot with PWM control of 72 and 76 mV,respectively.They were further reduced to 36 and 38 mV by using the proposed hybrid scheme,and 1%settling times were also reduced to 125 ns.

基于TOPSwitch-GX反激式变换器的高频变压器的设计

随着电力电子技术的发展,开关电源的应用越来越广泛。反激式变换器以其设计简单,体积小巧等优势,广泛应用于小功率场合。其中,高频变压器承担了传递功率、隔离等作用,是设计中极为关键的一环。介绍TOPSwich-GX系列芯片的工作原理,并以一个基于它的单输出反激式变换器为例,详细阐述了高频变压器设计的原理和步骤,对设计实践有很好的指导意义。

基于TOPSwitchⅡ的开关电源设计

TOPSwitchⅡ系列芯片是PowerIntegration公司生产的开关电源专用集成电路,他将脉宽调制电路与高压MOSFET开关管及驱动电路等集成在一起,具备完善的保护功能。使用该芯片设计的小功率开关电源,可大大减少外围电路,降低成本,提高可靠性。介绍其内部结构和工作原理,给出几种应用于反激式功率变换电路的典型用法,并给出一种反激式开关电源的实用电路。

Diode Pumped High Peak Power Quasi Q-Switched and Passively Q-Switched Nd:YVO₄Lasers at 1064 nm and 532 nm using Cr:YAG and KTP crystals

Diode end-pumped solid-state lasers have the potential to yield high quality laser beams with high efficiency for laser range finding and warning receiver applications as well as day and night military laser designation systems. In this paper we presents theoretical calculations using Advanced Dynamics Professional LASCAD software and experimental studies for a high power pigtailed fiber diode laser module of 8 W operating at 808 nm with a specially designed high efficiency cooling system, end pumped high-efficiency Nd:YVO4 laser of 3 × 3 × 10 mm rod and overall cavity length of 44 mm. To the best of our knowledge a self Q-switching effects was generated in Nd:YVO4 laser by changing the cavity dimensions and the position of the intracavity KTP crystal at certain regime of operation for the first time, in which the cavity length is reduced to be 30 mm and the distance between Nd:YVO4 rod and KTP crystal is only 1mm. Self Q-switched laser pulse at 532 nm with high peak power of 96 W, pulse width of 88 ns at FWHM and repetition rate of 400 kHz was achieved. Experimental studies of a passive Q-switched Nd:YVO4 laser using Cr:YAG crystal with three different transmissions of 30%, 40% and 70% were investigated. Passive Q-switched laser pulse at 1064 nm and narrow line width of less than 1.5 nm with highest peak power of nearly 18 kW, short pulse width of less than 4 ns at FWHM and higher repetition rate of 45 kHz using Cr:YAG with transmission of 30% was achieved for the first time.

基于DPA-Switch的小功率四路输出开关电源设计

DPA-Switch系列器件具有TOP和Tiny系列的技术特点,采用脉宽调制(PWM)和跳周期调制(PSM)相结合的新型调制方式来调节输出电压,并具有低功耗和高效率等优点。利用该系列器件设计一种小功率四路输出的单端正激式开关电源,给出了简化设计步骤和参数计算。

TOPSwitch-Ⅱ系列芯片在功率集成开关电源中应用的研究

TOPSwitch- 器件为三端单片开关电源,是一种将PWM和MOSF ET合二为一的新型集成芯片。与普通线性稳压电源相比其优点为体积小、重量轻,并且密度高、价格低;采用它制作高频开关电源,不仅简化了电路,同时可以改善电源的电磁兼容性能,且降低了制作成本。介绍了一个多路输出开关电源的设计。

Photoconductive semiconductor switch-based triggering with 1 ns jitter for trigatron

Synchronization for multiple-pulse at nanosecond range shows a great value on the power multiplication and synchronous electric fieldsapplications. Nanosecond or sub-ns jitter synchronization is essential for the improved working efficiency of the large amounts of pulse modulesand accurate requirements for the power coherent combining applications. This paper presents a trigger generator based on a laser diodetriggered GaAs photoconductive semiconductor switch (PCSS) with low jitter and compact size characteristics. It avoids the high currentsthat are harmful to high-gain mode PCSSs. In the trigger circuit, a 200 pF capacitor is charged by a microsecond-scale 18 kV pulse and thendischarged via the high-gain mode GaAs PCSS to trigger the high-power trigatron switch. When triggered by the ~10 ns pulse generated by thePCSS, the DC-charged trigatron can operate in the 20e35 kV range with 10 ns rise time and 1 ns delay-time jitter.

基于TinySwitch-Ⅱ的双路隔离输出开关电源设计

在某些特定电路场合,需要提供多路的隔离直流电源。对于多路隔离输出的开关电源,不能采用多路共地输出开关电源的常用方法来提高其交叉调整率,而隔离式的方法却设计复杂。文中设计了一种基于TinySwitch-Ⅱ芯片TNY264的小功率双路隔离输出的开关电源,采用线性稳压芯片对辅助回路进行稳压的方法,设计简单易行,并给出了高频变压器的详细设计过程。设计结果测试表明,设计的开关电源具有很好的电压调整率和负载调整率。

第四代TOPSwitch-GX系列单片开关电源

TOPSwitch-GX是美国Power Integrations公司在继TOPSwitch-Ⅰ、Ⅱ、FX三个系列之后,开发的最新单片开关电源系列,该系列芯片通过改进布局,扩展了电源功率,增加了大量新功能,从而有效地提高了电源设计的灵活性及电源效率。介绍了新型TOPSwitch-GX系列中TOP242-250芯片的性能特点。

Study on the Generation of Ultra-Wideband (UWB) High Power Microwave

The experimental study of ultra-wideband (UWB) technology, its generation and on-line measurement are presented. An experimental repetitive UWB system is designed, manufactured, and tested. High-pressure spark gap switch and its components, as well as oil spark gap switch are studied experimentally on the system. Experimental results indicate that the system operates at a 200 pps repetitive rate with a stable performance. 100 MW peak power UWB pulses are obtained on the system. Fast-time response capacitive divider is designed and fabricated, allowing for an accurate measurement of the high power UWB signal. The main issues related to the design of the switch and the UWB signal online measurement are discussed.