ASYMMETRIC VORTICES FLOW OVER SLENDER BODY AND ITS ACTIVE CONTROL AT HIGH ANGLE OF ATTACK

The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.

High myopia as a risk factor in primary open angle glaucoma

Glaucoma, one of the leading causes of irreversible blindness in the adult population worldwide, is a progressive optic neuropathy. Primary open angle glaucoma (POAG) is the most commonly reported type of glaucoma in population based prevalence studies worldwide. Elevated intraocular pressure is a well-known major risk factor for POAG. In addition, there is growing evidence that other risk factors like age, gender, race, refractive error, heredity and systemic factors may play a role in glaucoma pathogenesis. Many studies found that high myopia has been associated with POAG, however, direct and convincing evidences are still lacking. The aim of this review is to summarize the evidences implicating high myopia as a risk factor in the pathogenesis of POAG.

Control of Asymmetric Flow Fields of Slender Bodies at High Angle of Attack

The wind tunnel experiments is conducted to get inspiration for understanding the mechanism of the asymmetric flow pattern and developing an innovative flow control technique for a slender body at high angle of attack. The bi-stable situation of the side forces is observed, which could be easily switched by a tiny disturbances either from coming flow or from artificial disturbances at nose tip （including manufacturing defect）. In turbulent flows the side forces switched randomly between positive and negative. There exists a hysteresis loop of side force with the rolling angle. A rod in front of the slender body is used to change the vortex pattern, which could be kept even the rod is moved out from the stream. A miniature strake attached to the nose tip of the model can be moved to different circumferential position. When the strake is stationary, the hysteresis loop disappears and the side force does not change with the turbulent fluctuation of coming flow. The results from dynamic measurements of section side force indicates that when the strake swung at lower frequency the side force can follow the cadence of the swinging strake. With increasing frequency, the magnitude of the side force decreases. At still high frequency, the side force diminishes to zero. If the strake is swinging, while the middle position can be changed to different circumferential angle Фs on either left or right side, the side forces can be changed proportionally with the angle Фs. On the basis of the experimental results, the mechanism of the asymmetry is discussed.

Scanning transmission electron microscopy: A review of high angle annular dark field and annular bright field imaging and applications in lithium-ion batteries

Scanning transmission electron microscopy（STEM） has been shown as powerful tools for material characterization,especially after the appearance of aberration-corrector which greatly enhances the resolution of STEM. High angle annular dark field（HAADF） and annular bright field（ABF） imaging of the aberration-corrected STEM are widely used due to their high-resolution capabilities and easily interpretable image contrasts. However, HAADF mode of the STEM is still limited in detecting light elements due to the weak electron-scattering power. ABF mode of the STEM could detect light and heavy elements simultaneously, providing unprecedented opportunities for probing unknown structures of materials. Atomiclevel structure investigation of materials has been achieved by means of these imaging modes, which is invaluable in many fields for either improving properties of materials or developing new materials. This paper aims to provide a introduction of HAADF and ABF imaging techniques and reviews their applications in characterization of cathode materials, study of electrochemical reaction mechanisms, and exploring the effective design of lithium-ion batteries（LIBs）. The future prospects of the STEM are also discussed.

Single-beam leaky-wave antenna with wide scanning angle and high scanning rate based on spoof surface plasmon polariton

We propose a single-beam leaky-wave antenna(LWA) with a wide-scanning angle and a high-scanning rate based on spoof surface plasmon polariton(SSPP) in this paper. The SSPP transmission line(TL) is etched with periodically arranged circular patches, which converts the slow-wave mode into the fast-wave region for radiation. The proposed LWA is designed, fabricated, and tested. The simulated results imply that the proposed LWA not only achieves a high radiation efficiency of about 81.4%, and a high scanning rate of 12.12, but also has a large scanning angle of 176° over a narrow operation bandwidth of 8.3-9.6 GHz(for |S_(11)| <-10 dB). In addition, the simulated average gain of the LWA can reach as high as 10.9 d Bi. The measured scanning angle range is 175° in the operation band of 8.2-9.6 GHz, and the measured average gain is 10.6 dBi. The experimental results are consistent with the simulation, validating its performance. An antenna with high radiation efficiency, wide scanning angle range, and high scanning rate has great potential for application in radar and wireless communication systems.

Preliminary study in vitro brain tumor with high resolution magic angle spinning proton magnetic resonance spectroscopy

Objective： To explore water soluble metabolite features of brain tumor specimens with HRMAS-^1HMRS and its potential clinical value. Methods： There were thirty cases of pathologically proven brain tumor, including 6 Ⅰ-Ⅱ grade astrocytomas, 7 Ⅲ grade anaplastic astrocytomas, 10 IV grade glioblastomas and 7 meningiomas. Used Varian Company 600 MHz spectrometer with the Nano-probe for acquisition HRMASJHMRS, which was postprocessed with jMRUI 3.2 version software. These metabolic probability and their ratios to Cr were summed. Results： （1） HRMAS-^1HMRS could resolve NAA, PCr/Cr, GPC ± PCho ± Cho, Glu/GIn, Gly, Tau, Ala, Lac, ml and so on. All samples showed Lac, 6 samples showed unknown single peak at 3.72 ppm or 3.90 ppm. （2） The mean Cho/Cr of 6 Ⅰ-ⅡI grade astrocytomas was 2.42 ± 1.01 （P = 0.003, compared with glioblastoma）. The mean Cho/Cr of 7 anaplastic astrocytomas was 3.48 ± 0.59 （P = 0.01, compared with glioblastoma）. The Cho/Cr of 10 glioblastomas broadly ranged from 0.9 to 11.3 （mean 5.40 ± 1.23）. From Ⅰ-Ⅱ grade astrocytoma to glioblastoma, Ala/Cr, Tau/Cr and Gly/Cr trends were increased; the mean Ala/Cr of glioma was 0.31 ± 0.13. （3） Meningiomas showed higher Ala and Cho. Their Cr was lower than that of gliomas. 4/7 cases had no NAA, 3/7 patients had lower NAA. Mean Cho/Cr was 3.56 ± 1.01, Ala/Cr was 0.53 ±0.28 （P = 0.006, compared with glioma）. Conclusion： HRMAS-^1HMRS can show further details in vivo MRS, resolve in vivo spectroscopic metabolite of Cho compound and differentiate the extent of benign and malignant glioma. With the increase in the malignant degree of gliomas, Cho, ml, Ala, Tau and Gly will increase. HRMAS-^1HMRS is the only method of isotropic spectroscopy for pathological specimens.

Relationship between boundary misorientation angle and true strain during high temperature deformation of 7050 aluminum alloy

Tensile tests of solid solution treated 7050 aluminum alloy were conducted to different strain degrees (0.1, 0.4, 0.6 and failure) at 460 ℃ with the strain rate of 1.0×10-4-1.0×10-1s-1. The boundary misorientation angle evolution during hot deformation of the 7050 aluminum alloy was studied by EBSD technique and the fracture surfaces were observed using SEM. A linear relationship between the increase in the average boundary misorientation angle and the true strain at different strain rates is assumed when aluminum alloy is deformed at 460 ℃. The increasing rate of average boundary misorientation angle is 15.1-, 15.7- and -0.75- corresponding to the strain rate of 1.0×10-4, 1.0×10-2 and 0.1 s-1, respectively. The main softening mechanism is continuous dynamic recrystallization when the strain rates are 1.0×10-4 and 1.0×10-2 s-1, and it is dynamic recovery when strain rate is 0.1 s-1.

AcrySof phakic angle-supported intraocular lens for the correction of high to extremely high myopia:one-year follow-up results

AIM: To assess the safety, efficacy and predictability of the AcrySof phakic angle-supported intraocular lens (IOL) (Alcon Inc., U.S.A.) for correction of high-to-extremely high myopia in adults. METHODS: In this prospective study performed in Tianjin Medical University Eye Center & College of Optometry, Tianjin, China, 25 eyes of 13 patients were implanted with AcrySof phakic angle-supported IOLs and followed for 1 year postoperatively. Preoperative manifest refractive sphere was (-12.08 +/- 2.44) diopters (D) and cylinder was (-1.35 +/- 0.62)D. Visual acuity, predictability and stability of manifest refraction spherical equivalent (MRSE), adverse events, and endothelial cell density were analyzed during 1-year of follow-up. RESULTS: After 1 year of follow-up, no eyes lost 1 line (best spectacle-corrected visual acuity)BSCVA; an uncorrected visual acuity (UCVA) of 20/20 or better was achieved in 60% of eyes; 100% had an UCVA of 20/40 or better; a BSCVA of 20/30 or better was achieved by 100% of eyes; 84% had a BSCVA of 20/20 or better. The overall mean percentage change in endothelial cell density 1 year after surgery was (-0.27 +/- 3.60)%. Two eyes (8%) had increased intraocular pressure (IOP) on the day of surgery. No pupil ovalization, pupillary block, or retinal detachment events were observed. CONCLUSION: After 1 year of follow-up, the implantation of AcrySof phakic angle-supported IOL is proved to be safe, effective and predictable with minimal complications in patients with high-to-extremely high myopia. Due to the limitation of visiting time, long-term of clinical investigation is necessary to verify the safety and efficacy of this IOL.

COMPUTATION OF FIELD STRUCTURE AND AERODYNAMIC CHARACTERISTICS OF DELTA WINGS AT HIGH ANGLES OF ATTACK

A numerical investigation of the structure of the vortical flowfield over delta wings at high angles of attack in longitudinal and with small sideslip angle is presented. Three-dimensional Navier-Stokes numerical simulations were carried out to predict the complex leeward-side flowfield characteristics that are dominated by the effect of the breakdown of the leading-edge vortices. The methods that analyze the flowfield structure quantitatively were given by using flowfield data from the computational results. In the region before the vortex breakdown, the vortex axes are approximated as being straight line. As the angle of attack increases, the vortex axes are closer to the root chord, and farther away from the wing surface. Along the vortex axes, as the adverse pressure gradients occur, the axial velocity decreases, that is, A is negativee, so the vortex is unstable, and it is possible to breakdown. The occurrence of the breakdown results in the instability of lateral motion for a delta wing, and the lateral moment diverges after a small perturbation occurs at high angles of attack. However, after a critical angle of attack is reached the vortices breakdown completely at the wing apex, and the instability resulting from the vortex breakdown disappears.

Stability of High Slope Interbedded Strata with Low Dip Angle Constituted by Soft and Hard Rock Mass

Slopes consisting of interbedded strata of soft and hard rock mass, such as purplish red mudstone and grey brown arkosic sandstone of Jurassic age, are very common in Sichuan basin of China. The mudstone is soft while the sandstone is hard and contains many opening or closing joints with a high dip angle. Some are nearly parallel and the others are nearly decussated with the trend of the slopes. Many natural slopes are in deformation or sliding because of those reasons. The stability of cutting slopes and supporting method to be taken for their stability in civil engineering are important. In this paper, the stability and deformation of the slopes are studied. The methods of analysis and support design principle are analyzed also. Finally, the method put forward is applied to study Fengdian high cutting slope in Sichuan section of the express way from Chengdu to Shanghai. The results indicate that the method is effective.

短口外弓配合固定矫治器治疗AngleⅡ类Ⅰ分类高角病例

目的 研究短外弓在安氏Ⅱ类Ⅰ分类高角错病例治疗中的作用。方法 选择到广西医科大学附属口腔医院正畸科治疗的病人 1 1例 ,均过生长发育高峰期 ,使用短外弓配合固定矫治器进行治疗 ,疗程 1 5个月 ,拍摄治疗前后头颅侧位片进行分析 ,并对治疗前后的变化进行配对t检验。结果 上颌骨长度和高度没有明显变化 ,下颌平面角FMA变化在Ⅰ°以内 ,上切牙和下颌磨牙伸长。

Opening Angle Rules of the Aerodynamic Brake Panel

In order to get the relationship between aerodynamic brake effect and the opening angle,based on a high-speed train model in CFD software FLUENT,the aerodynamic force properties from brake panels with different opening angles were analyzed as well as the flow field's variation laws. Six cases were researched,taking opening angles 45°,60°,75°,80°,85° and 90° respectively.Three-dimensional Reynolds-average Navier-Stokes equation combined with k-ε turbulence model was utilized. The control equation was discretized and solved by finite volume method.SIMPLE method was also considered to couple the pressure and velocity fields and search the numeric solutions. Conclusions can be achieved from the results which are shown as follows. When the opening angle increases from 45° to 75°,the aerodynamic forces and the central area with larger pressure increase fast,and the flow field distribution changes greatly; when the opening angle increases from75° to 90°,the aerodynamic forces and the central area with larger pressure increase slowly, and the flow field distribution changes slightly; considering train boundary and opening performance of the wind resistance brake mechanism,the opening angle should be 75°.

Engagement Angle Modeling for Multiple-circle Continuous Machining and Its Application in the Pocket Machining

The progressive cutting based on auxiliary paths is an effective machining method for the material accumulating region inside the mould pocket. But the method is commonly based on the radial depth of cut as the control parameter, further more there is no more appropriate adjustment and control approach. The end-users often fall to set the parameter correctly, which leads to excessive tool load in the process of actual machining. In order to make more reasonable control of the machining load and toolpath, an engagement angle modeling method for multiplecircle continuous machining is presented. The distribution mode of multiple circles, dynamic changing process of engagement angle, extreme and average value of engage- ment angle are carefully considered. Based on the engagement angle model, numerous application techniques for mould pocket machining are presented, involving the calculation of the milling force in multiple-circle continuous machining, and rough and finish machining path planning and load control for the material accumulating region inside the pocket, and other aspects. Simulation and actual machining experiments show that the engagement angle modeling method for multiple-circle continuous machining is correct and reliable, and the related numerous application techniques for pocket machining are feasible and effective. The proposed research contributes to the analysis and control tool load effectively and tool-path planning reasonably for the material accumulating region inside the mould pocket.

Critical current density behaviors across a grain boundary inclined to current with different angles in YBa2Cu3O7-δ bicrystal junctions

The critical current density behaviors across a bicrystal grain boundary（GB） inclined to the current direction with different angles in YBa2Cu3O7-δ bicrystal junctions in magnetic fields are investigated.There are two main reasons for the difference in critical current density in junctions at different GB inclined angles in the same magnetic field：（i） the GB plane area determines the current carrying cross section;（ii） the vortex motion dynamics at the GB affects the critical current value when the vortex starts to move along the GB by Lorentz force.Furthermore,the vortex motion in a bicrystal GB is studied by investigating transverse（Hall） and longitudinal current–voltage characteristics（I–Vxx and I–Vxy）.It is found that the I–Vxx curve diverges from linearity at a high driving current,while the I–Vxy curve keeps nearly linear,which indicates the vortices inside the GB break out of the GB by Lorentz force.

Crustal structure of the eastern Dabie orogenic belt from the seismic tomography and wide-angle reflection studies

The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.

Study and application of the influence of inclination angle on the cross-fusion mechanism of high gas thick coal seam

In this study,to better decide the effect of coal seam dip angle upon the dynamic change of the crossfusion in gas transport and storage areas during the progress of working face in the high gas thick coal seam,a two-dimensional physical simulation experiment regarded as the theoretical research was conducted to properly explore the variation law of overburden fracture.The results demonstrated that the boundary of the gas transport zone was located in the region of fracture separation.The boundary of the gas storage area was located in the abrupt penetration zone.Also,according to the information theory,the state of the gas transport and storage areas was determined by the changing trend of the fracture rate and fracture entropy.The mathematical representation model of the dip effect in gas transport and storage areas was established.The criteria upon which the regional location of the gas transport area and gas storage area can be based were put forward.The cross-fusion evolution process of the dip effect in gas transport and storage areas was revealed as well.The research results could provide guidance for realising directional and accurate gas extraction.

基于水力压裂现场实验室的致密砾岩人工缝网特征

为明确玛湖致密砾岩储层水力压裂后缝网发育特征,借鉴北美水力压裂试验场的成功经验,在玛131井区三叠系百口泉组二段(T1b2)和三段(T1b3)建立水力压裂现场实验室,共实施12口水平井和1口大斜度取心井,根据取心井MaJ02岩心裂缝CT扫描、成像测井以及岩心直接观测结果,结合示踪剂监测资料,研究水力压裂缝产状、连通情况、扩展规律和主控因素。研究表明:①水力压裂形成张性和剪切两种性质的裂缝,张性缝近似平行于最大水平主应力方向,自井筒射孔簇最远可延伸50 m;剪切缝分布于张性缝之间,大部分受缝间诱导应力场影响呈走滑剪切模式,部分呈共轭成对出现,整体上压裂缝呈先张后剪、张剪相间、剪切为主的特征。②示踪剂监测结果表明,生产早期井间普遍存在连通,随着生产的进行,缝内静压力逐渐降低,井间连通性下降。③岩性和压裂参数影响水力裂缝密度,泥岩夹层水力裂缝密度低于砾岩,并限制裂缝的扩展;更大的改造规模、更小的簇间距可提高裂缝密度,是提高单井产量的重要方向。

STRATEGY AND IMPLEMENTATION FOR HIGH-SPEED TORQUE ENHANCEMENT OF BRUSHLESS DC MOTOR

Serious commutation lag occurs when a Brushless DC Motor(BLDCM) operates at high speeds,and this leads to torque decline with ripple.In this paper,an advanced conduction control scheme is proposed which can accelerate the commutation and enhance the torque production remarkably.Besides,an on line adjusting algorithm based on the Golden Section Method is adopted to search the optimal advanced conduction angle.Simulation and experimental results verify the feasibility and effectivity of the scheme proposed.

布儒斯特角在高速铁路场景下对于场强以及路径损耗的影响

服务于高铁乘客上网的5G覆盖,主要依靠轨旁基站信号穿透到列车车窗到达车厢内终端的无线链路。在实地测量后利用实测数据建立的信道模型仿真中,发现高铁通信场景中特定的站高下,信号直射与反射构成的场景存在路径损耗的跳变,经证明是由于地面反射中存在全折射,即入射角为布儒斯特角。推导了两径场景下的场强公式,仿真结果证明了公式的准确性,并利用对实地信道和高铁玻璃的真实测试数据校正了相关电磁场仿真参数。对5G基站链路设计有参考价值。

骨性Ⅱ类高角患者上切牙冠根形态及位置相关指标的测量分析

目的:测量骨性Ⅱ类高角患者上切牙冠根形态及位置的相关指标并比较其差异,以期为临床矫治此类错牙合畸形时更好地控制上切牙移动提供参考。方法:收集骨性Ⅱ类高角患者正畸矫治前的CBCT影像,分为青少年组及成人组,每组33例,共264颗上颌切牙。利用DCT Viewer影像分析软件,测量CBCT影像上的264颗上切牙解剖及临床冠、根长度并计算冠根比,同时测量冠根角、牙根的唇舌向位置等并对两组指标的测量结果进行统计学分析。结果:青少年组上中切牙解剖牙冠长度、临床牙冠长度、牙长轴-腭平面交角、根尖唇侧牙槽骨厚度及侧切牙根尖唇侧牙槽骨厚度均大于成人组(P<0.05)。两组上切牙临床冠根比均大于解剖冠根比(P<0.05),两组临床冠根比均值均≥1。两组上中切牙解剖和临床冠根比、冠根角均大于上侧切牙(P<0.05)。两组上中切牙根尖腭侧牙槽骨厚度均大于上侧切牙,上中切牙根尖唇侧牙槽骨厚度均小于上侧切牙(均P<0.05)。结论:骨性Ⅱ类高角青少年及成人患者上切牙冠根比在正畸矫治前普遍存在失调,上中切牙较侧切牙更容易发生冠根比异常。成人骨性Ⅱ类高角患者上切牙牙根较青少年患者更偏向牙槽骨唇侧且更为直立。侧切牙根尖腭侧牙槽骨较薄,冠根成角更为明显。临床矫治此类患者时应根据上颌切牙的具体情况设计矫治方案,以达到更好的矫治效果。