The tensile properties of three different carbonfiberreinforced carbon composites (C/C), mat C/C, 2D laminate and 4D C/C, were investigated under the combined influence of temperature and loading rate. From the experi...The tensile properties of three different carbonfiberreinforced carbon composites (C/C), mat C/C, 2D laminate and 4D C/C, were investigated under the combined influence of temperature and loading rate. From the experiments the following could be concluded: loading rate between 10-1-10 mm/min was valid; the fracture stress of the three kinds of C/C composites increased with increasing temperature in the range from room temperature to 1900, and the initial modulus of 2D laminate C/C composites increased with the increase of temperature up to 2000.展开更多
A new brazing technique of diamond was developed. Using this new technique optimum chemical and metallurgical bonding between the diamond grits and the carbon steel can be achieved without any thermal damages to diamo...A new brazing technique of diamond was developed. Using this new technique optimum chemical and metallurgical bonding between the diamond grits and the carbon steel can be achieved without any thermal damages to diamond grits. The results of microanalysis and X-ray diffraction analysis reveal that a carbide layer exists between the diamond and the matrix, which consists of Cr3C2, Cr7C3 and Cr23C6. Performance tests show that the brazed diamond core-drill has excellent machining performance. In comparison with traditional electroplated diamond core-drill, the brazed diamond core-drill manufactured using the new developed technique has much higher machining efficiency and much longer operating life.展开更多
The elevated temperature performances of 2D70 Al alloy hot extrusion rods after two-stage homogenization and intensive deformation were studied by measuring the elevated temperature enduring strength and the creep ult...The elevated temperature performances of 2D70 Al alloy hot extrusion rods after two-stage homogenization and intensive deformation were studied by measuring the elevated temperature enduring strength and the creep ultimate strength. The fracture morphology of some selected samples after testing at different elevated temperatures was observed by scanning electron microscopy （SEM）. The results indicate that, as the test temperature increases, the elevated temperature enduring strength of 2D70 Al alloy decreases gradually. In a comparison between 150 C and 240 C, the notch enduring strength drops from 375 to 185 MPa and the smooth enduring strength drops from 337 to 130 MPa. Enduring strength is not sensitive to the notch. The notch sensitivity ratio （NSR） coefficient is in the range of 1.119 to 1.423 from 150 C to 240 C. The creep test results show that, as the test temperature increases from 150 C to 240 C, the creep ultimate strength of 2D70 Al alloy rods drops gradually from 312 to 117 MPa.展开更多
Zr-based metallic glasses(MGs)possess a wide supercooled liquid region,which gives a wide processing window for superplastic forming to make microdevices with demanding size accuracy and surface finishing.The existenc...Zr-based metallic glasses(MGs)possess a wide supercooled liquid region,which gives a wide processing window for superplastic forming to make microdevices with demanding size accuracy and surface finishing.The existence of oxygen may have an influence on the thermoplastic deformation process.Therefore,the effect of oxidation on the mechanical behavior of the MGs in the vicinity of glass transition temperature is of great significance for practical forming of MG components.In the present study,the effect of oxidation on tensile properties of Zr50Cu40Al10 metallic glass was investigated.The tested samples were characterized by XRD and SEM analysis.For the samples tested in air,the strength decreases 187 MPa,61 MPa and 59 MPa and the ductility increases 0.31,0.36,and 0.77 at 420℃,430℃,and 440℃,respectively,compared with those tested in flowing argon.ZrO_(2) preferentially formed during the tensile testing at 420℃,and both ZrO_(2) and Al_(2)O_(3) oxides formed at 430℃.The dilution of Zr elements in the remaining amorphous matrix caused by preferential oxidation on the surface layer attributes to the decrease in strength and enhancement in ductility of the Zr_(50)Cu_(40)Al_(10) metallic glasses.展开更多
文摘The tensile properties of three different carbonfiberreinforced carbon composites (C/C), mat C/C, 2D laminate and 4D C/C, were investigated under the combined influence of temperature and loading rate. From the experiments the following could be concluded: loading rate between 10-1-10 mm/min was valid; the fracture stress of the three kinds of C/C composites increased with increasing temperature in the range from room temperature to 1900, and the initial modulus of 2D laminate C/C composites increased with the increase of temperature up to 2000.
文摘A new brazing technique of diamond was developed. Using this new technique optimum chemical and metallurgical bonding between the diamond grits and the carbon steel can be achieved without any thermal damages to diamond grits. The results of microanalysis and X-ray diffraction analysis reveal that a carbide layer exists between the diamond and the matrix, which consists of Cr3C2, Cr7C3 and Cr23C6. Performance tests show that the brazed diamond core-drill has excellent machining performance. In comparison with traditional electroplated diamond core-drill, the brazed diamond core-drill manufactured using the new developed technique has much higher machining efficiency and much longer operating life.
基金support from the National Key Technology Research and Development Program of China (No.2007BAE38B06)Heilongjiang Province Science Fund for Distinguished Young Scholars(No. JC201013)
文摘The elevated temperature performances of 2D70 Al alloy hot extrusion rods after two-stage homogenization and intensive deformation were studied by measuring the elevated temperature enduring strength and the creep ultimate strength. The fracture morphology of some selected samples after testing at different elevated temperatures was observed by scanning electron microscopy （SEM）. The results indicate that, as the test temperature increases, the elevated temperature enduring strength of 2D70 Al alloy decreases gradually. In a comparison between 150 C and 240 C, the notch enduring strength drops from 375 to 185 MPa and the smooth enduring strength drops from 337 to 130 MPa. Enduring strength is not sensitive to the notch. The notch sensitivity ratio （NSR） coefficient is in the range of 1.119 to 1.423 from 150 C to 240 C. The creep test results show that, as the test temperature increases from 150 C to 240 C, the creep ultimate strength of 2D70 Al alloy rods drops gradually from 312 to 117 MPa.
基金financially supported by the National Natural Science Foundation of China(Grant No.51801208)the Joint Research Fund of Natural Science Foundation of Liaoning Province-State Key Laboratory of Rolling and Automation(Grant No.2019-KF-05-05)。
文摘Zr-based metallic glasses(MGs)possess a wide supercooled liquid region,which gives a wide processing window for superplastic forming to make microdevices with demanding size accuracy and surface finishing.The existence of oxygen may have an influence on the thermoplastic deformation process.Therefore,the effect of oxidation on the mechanical behavior of the MGs in the vicinity of glass transition temperature is of great significance for practical forming of MG components.In the present study,the effect of oxidation on tensile properties of Zr50Cu40Al10 metallic glass was investigated.The tested samples were characterized by XRD and SEM analysis.For the samples tested in air,the strength decreases 187 MPa,61 MPa and 59 MPa and the ductility increases 0.31,0.36,and 0.77 at 420℃,430℃,and 440℃,respectively,compared with those tested in flowing argon.ZrO_(2) preferentially formed during the tensile testing at 420℃,and both ZrO_(2) and Al_(2)O_(3) oxides formed at 430℃.The dilution of Zr elements in the remaining amorphous matrix caused by preferential oxidation on the surface layer attributes to the decrease in strength and enhancement in ductility of the Zr_(50)Cu_(40)Al_(10) metallic glasses.
