In order to determine the size measurement accuracy of the high temperature forging's multicolor CCD image by using computerprograms, this paper obtained the high temperature forging's CCD image by multicolor CCD ca...In order to determine the size measurement accuracy of the high temperature forging's multicolor CCD image by using computerprograms, this paper obtained the high temperature forging's CCD image by multicolor CCD camera and its fact size by thevernier caliper on the forging field, and then measured the size of the high temperature forging from its CCD image, compared thesize from the CCD image and the size from the vernier caliper, the result shows that the measurement accuracy satisfied theindustrial production.展开更多
Cr is the most important element in nickel-based alloys to prevent high temperature oxidation and corrosion. However, high-Cr content will lead to a decline of hot workability which limits the addition of Cr for most ...Cr is the most important element in nickel-based alloys to prevent high temperature oxidation and corrosion. However, high-Cr content will lead to a decline of hot workability which limits the addition of Cr for most nickel-based superalloys. In order to add more Cr into Ni-based alloy for improving high temperature oxidation and corrosion resistance, the poor hot workability of high-Cr alloy must be first solved. Deformation characteristic of a high-Cr nickel-based alloy (40 wt% Cr) under hot compression conditions at 800-1200 ℃ has been investigated by using a Gleeble 3500 machine, and the microstructural evolution during hot working process has been observed by optical microscopy and scanning electron microscopy. The results show that a high-temperature low-plasticity (HTLP) region exists in this high-Cr nickel-based alloy. This phenomenon can be attributed to its non-uniform interdendritic microstructure at high temperatures. These results can explain the poor hot workability of high-Cr nickel-based alloy.展开更多
Dry sliding wear tests of a Cr-Mo-V cast hot-forging die steel was carried out within a load range of 50--300 N at 400℃ by a pin-on-disc high temperature wear machine. The effect of heat treatment process on wear res...Dry sliding wear tests of a Cr-Mo-V cast hot-forging die steel was carried out within a load range of 50--300 N at 400℃ by a pin-on-disc high temperature wear machine. The effect of heat treatment process on wear resistance was systematically studied in order to select heat treatment processes of the steel with high wear resistance. The morphology, structure and composition were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) ; wear mechanism was also discussed. Tribo-oxide layer was found to form on worn surfaces to reduce wear under low loads, but appear inside the matrix to increase wear under high loads. The tribo-oxides were mainly consisted of Fe3O4 and Fe2O3, FeO only appeared under a high load. Oxidative mild wear, transition of mild-severe wear in oxidative wear and extrusive wear took turns to operate with increasing the load. The wear resistance strongly depended on the selection of heat treatment processes or microstructures. It was found that bainite presented a better wear resistance than martensite plus bainite duplex structure, martensite structure was of the poorest wear resistance. The wear resistance increased with increasing austenizing temperature in the range of 920 to 1 120 ℃, then decreased at up to 1 220 ℃. As for tempering temperature and microstructure, the wear resistance increased in following order: 700℃ (tempered sorbite), 200 ℃ (tempered martensite), 440 to 650 ℃ (tempered troostite). An appropriate combination of hardness, toughness, microstructural thermal stability was re- quired for a good wear resistance in high-temperature wear. The optimized heat treatment process was suggested for the cast hot-forging steel to be austenized at 1020 to 1 120 ℃, quenched in oil, then tempered at 440 to 650℃ for 2 h.展开更多
文摘In order to determine the size measurement accuracy of the high temperature forging's multicolor CCD image by using computerprograms, this paper obtained the high temperature forging's CCD image by multicolor CCD camera and its fact size by thevernier caliper on the forging field, and then measured the size of the high temperature forging from its CCD image, compared thesize from the CCD image and the size from the vernier caliper, the result shows that the measurement accuracy satisfied theindustrial production.
基金support from the National Natural Science Foundation of China, No.50771011
文摘Cr is the most important element in nickel-based alloys to prevent high temperature oxidation and corrosion. However, high-Cr content will lead to a decline of hot workability which limits the addition of Cr for most nickel-based superalloys. In order to add more Cr into Ni-based alloy for improving high temperature oxidation and corrosion resistance, the poor hot workability of high-Cr alloy must be first solved. Deformation characteristic of a high-Cr nickel-based alloy (40 wt% Cr) under hot compression conditions at 800-1200 ℃ has been investigated by using a Gleeble 3500 machine, and the microstructural evolution during hot working process has been observed by optical microscopy and scanning electron microscopy. The results show that a high-temperature low-plasticity (HTLP) region exists in this high-Cr nickel-based alloy. This phenomenon can be attributed to its non-uniform interdendritic microstructure at high temperatures. These results can explain the poor hot workability of high-Cr nickel-based alloy.
基金Item Sponsored by National Nature Science Foundation of China(51071078)
文摘Dry sliding wear tests of a Cr-Mo-V cast hot-forging die steel was carried out within a load range of 50--300 N at 400℃ by a pin-on-disc high temperature wear machine. The effect of heat treatment process on wear resistance was systematically studied in order to select heat treatment processes of the steel with high wear resistance. The morphology, structure and composition were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) ; wear mechanism was also discussed. Tribo-oxide layer was found to form on worn surfaces to reduce wear under low loads, but appear inside the matrix to increase wear under high loads. The tribo-oxides were mainly consisted of Fe3O4 and Fe2O3, FeO only appeared under a high load. Oxidative mild wear, transition of mild-severe wear in oxidative wear and extrusive wear took turns to operate with increasing the load. The wear resistance strongly depended on the selection of heat treatment processes or microstructures. It was found that bainite presented a better wear resistance than martensite plus bainite duplex structure, martensite structure was of the poorest wear resistance. The wear resistance increased with increasing austenizing temperature in the range of 920 to 1 120 ℃, then decreased at up to 1 220 ℃. As for tempering temperature and microstructure, the wear resistance increased in following order: 700℃ (tempered sorbite), 200 ℃ (tempered martensite), 440 to 650 ℃ (tempered troostite). An appropriate combination of hardness, toughness, microstructural thermal stability was re- quired for a good wear resistance in high-temperature wear. The optimized heat treatment process was suggested for the cast hot-forging steel to be austenized at 1020 to 1 120 ℃, quenched in oil, then tempered at 440 to 650℃ for 2 h.