Steel slag, a by-product of the steel production industry reaches 10%–15% of crude steel output (Motz and Geiseler, 2001). Their main application lies in the field of building materials due to some containing cementi...Steel slag, a by-product of the steel production industry reaches 10%–15% of crude steel output (Motz and Geiseler, 2001). Their main application lies in the field of building materials due to some containing cementitious components, such as dicalcium silicate (C2S) and tricalcium silicate (C3S) (Waligora et al., 2010). However, blended cements with steelmaking slag show low early hydration activity, low compressive strength and bad durability because steel slag generates above 1600 ℃ with the tense and large grain size crystals, consisting of low content of C2S and C3S and high proportions of f-CaO and f-MgO compared with cement clinker.展开更多
The cube textured pure Ni and non magnetic Cu Ni tapes were obtained by rolling and recrystallization, and these tapes are suitable as substrates of the second generation high temperature superconducting tape. The t...The cube textured pure Ni and non magnetic Cu Ni tapes were obtained by rolling and recrystallization, and these tapes are suitable as substrates of the second generation high temperature superconducting tape. The texture of tapes was studied using Orientation Distribution Function (ODF) and φ scans. The results indicate that sharp cube texture of Cu 0 70 Ni 0.30 and pure Ni was formed at 1000 ℃ and that of Cu 0 85 Ni 0.15 was formed at 900 ℃. The intensities of cube texture differ from each other. Uniform equiaxial crystallites are formed in all the tapes and the size of Cu 0.85 Ni 0.15 is larger than that of Cu 0.70 Ni 0.30 and pure Ni. Annealing twin is formed in Cu 0.85 Ni 0.15 and Cu 0.70 Ni 0.30 .展开更多
Y2O3-doped ZnO-based varistor ceramics were prepared using high-energy ball milling （HEBM） and low-temperature sin- tering technique, with voltage-gradient of 1934-2197 V/mm, non-linear coefficients of 20.8-21.8, le...Y2O3-doped ZnO-based varistor ceramics were prepared using high-energy ball milling （HEBM） and low-temperature sin- tering technique, with voltage-gradient of 1934-2197 V/mm, non-linear coefficients of 20.8-21.8, leakage currents of 0.59-1.04 μA, and densities of 5.46-5.57 g/cm3. With increasing Y2O3 content, the voltage-gradient increases because of the decrease of ZnO grain size; the non-linear coefficient and the leakage current improve but the density decreases because of more porosity; the donor con- centration and density of interface states decrease, whereas the barrier height and width increase because of the acceptor effect of Y2O3 in varistor ceramics.展开更多
基金Supported by the National Key Technologies R&D Program of China (NO. 2011BAB03B05)
文摘Steel slag, a by-product of the steel production industry reaches 10%–15% of crude steel output (Motz and Geiseler, 2001). Their main application lies in the field of building materials due to some containing cementitious components, such as dicalcium silicate (C2S) and tricalcium silicate (C3S) (Waligora et al., 2010). However, blended cements with steelmaking slag show low early hydration activity, low compressive strength and bad durability because steel slag generates above 1600 ℃ with the tense and large grain size crystals, consisting of low content of C2S and C3S and high proportions of f-CaO and f-MgO compared with cement clinker.
文摘The cube textured pure Ni and non magnetic Cu Ni tapes were obtained by rolling and recrystallization, and these tapes are suitable as substrates of the second generation high temperature superconducting tape. The texture of tapes was studied using Orientation Distribution Function (ODF) and φ scans. The results indicate that sharp cube texture of Cu 0 70 Ni 0.30 and pure Ni was formed at 1000 ℃ and that of Cu 0 85 Ni 0.15 was formed at 900 ℃. The intensities of cube texture differ from each other. Uniform equiaxial crystallites are formed in all the tapes and the size of Cu 0.85 Ni 0.15 is larger than that of Cu 0.70 Ni 0.30 and pure Ni. Annealing twin is formed in Cu 0.85 Ni 0.15 and Cu 0.70 Ni 0.30 .
文摘Y2O3-doped ZnO-based varistor ceramics were prepared using high-energy ball milling （HEBM） and low-temperature sin- tering technique, with voltage-gradient of 1934-2197 V/mm, non-linear coefficients of 20.8-21.8, leakage currents of 0.59-1.04 μA, and densities of 5.46-5.57 g/cm3. With increasing Y2O3 content, the voltage-gradient increases because of the decrease of ZnO grain size; the non-linear coefficient and the leakage current improve but the density decreases because of more porosity; the donor con- centration and density of interface states decrease, whereas the barrier height and width increase because of the acceptor effect of Y2O3 in varistor ceramics.
