Effects of flaky rare earth oxide additives including Er2O3,Tm2O3,and Yb2O3,Lu2O3 on high temperature and high rate discharge performance of nickel electrodes were investigated.The discharge efficiency at 0.2C reached...Effects of flaky rare earth oxide additives including Er2O3,Tm2O3,and Yb2O3,Lu2O3 on high temperature and high rate discharge performance of nickel electrodes were investigated.The discharge efficiency at 0.2C reached 96% at 60 oC for electrodes with 1 at.% flaky rare earth oxides.The high rate discharge performance for electrodes with flaky rare earth oxides were improved significantly,for example,discharge efficiency at 5C improved from 50% to 70%.The results showed that the end charging potential of the ...展开更多
The rapid development of electric vehicles demands the development of high performance nickel metal hydride battery that is able to endure high temperature. The discharge properties of Ti 0.7 Zr 0.5 V 0.2 Mn 1.8- x Ni...The rapid development of electric vehicles demands the development of high performance nickel metal hydride battery that is able to endure high temperature. The discharge properties of Ti 0.7 Zr 0.5 V 0.2 Mn 1.8- x Ni x ( x =0.4, 0.8, 1.1, 1.4, 1.7)hydrogen storage alloys was investigated and its phase composition was analyzed using X ray diffraction. The results show that the cycling life was improved as the content of nickel increases. When x =0.4, 0.8, 1.1 and 1.4, the main phase is MgZn 2 type C14 Laves phase and the second one is cubic TiNi phase. When x =1.7, the Laves phase structure disappears. EDAS analysis shows that the increase of nickel content is effective in suppressing the dissolution of vanadium component in alloys. [展开更多
Engineering failure of membrane electrode assembly caused by increasingly fuel poisoning in the high temperature polymer electrolyte membrane fuel cells fed with humidified reformate gases is firstly demonstrated here...Engineering failure of membrane electrode assembly caused by increasingly fuel poisoning in the high temperature polymer electrolyte membrane fuel cells fed with humidified reformate gases is firstly demonstrated herein this work. Based on the results of the in-situ environmental scanning electron microscope, electrochemical analyses, and limiting current method, a water-induced phosphoric acid invasion model is constructed in the porous electrode to elucidate the failure causations of the hindered hydrogen mass transport and the enhanced carbon monoxide poisoning. To optimize the phosphoric acid distribution under the inevitably humidified circumstance, a facile and effective strategy of constructing acid-proofed electrode is proposed and demonstrates outstanding stability with highly humidified reformate gases as anode fuel. This work discusses a potential defect that was rarely studied previously under practical working circumstance for high temperature polymer electrolyte membrane fuel cells, providing an alternative opinion of electrode design based on the fundamental aspects towards the engineering problems.展开更多
Different types of ABPBI (poly(2,5-benzimidazole)) membranes and polymer binders were evaluated to investigate the performance of MEAs for high temperature proton exchange membrane fuel cell (HT-PEMFC). The properties...Different types of ABPBI (poly(2,5-benzimidazole)) membranes and polymer binders were evaluated to investigate the performance of MEAs for high temperature proton exchange membrane fuel cell (HT-PEMFC). The properties of the prepared MEAs were evaluated and analyzed by polarization curve, electrochemistry impedance spectroscopy (EIS), cyclic voltammetry (CV) and durability test. The results showed that MEA with modified ABPBI membrane (AM) has satisfactory performance and durability for fuel cell application. Compare to conventional PBI or Nafion binders, polytetrafluoroethylene (PTFE) and polyvinylidene difluoride (PVDF) are more attractive as binders in the catalyst layer (CL) of gas diffusion electrode (GDE) for HT-PEMFC.展开更多
Thermodynamic concepts required for the thermodynamic calculation of the potentials of electrodes for high temperature applications are briefly reviewed. A thermodynamic approach to the calculation of half cell potent...Thermodynamic concepts required for the thermodynamic calculation of the potentials of electrodes for high temperature applications are briefly reviewed. A thermodynamic approach to the calculation of half cell potentials and the standard chemical potential of an electron at high temperatures which are related to the Standard Hydrogen Electrode(SHE) is discussed. As examples, an external Ag/AgCl reference electrode and a YSZ(Ag|O_2) pH sensor for high temperature applications are analyzed by using the thermodynamic approach to derive a high temperature pH measurement equation. The two electrodes are employed to measure high temperature pH and the measured pH was compared with the calculated pH by using a solution chemistry method. Concepts and principles for electrode kinetics are also briefly introduced and a modification to the Tafel equations is suggested.展开更多
The Co(Ⅲ)-coated spherical nickel hydroxide powder is optimum as positive electrode of high power Ni-MH battery because of its excellent property. But the performances at high temperature(above 50 ℃) is still not sa...The Co(Ⅲ)-coated spherical nickel hydroxide powder is optimum as positive electrode of high power Ni-MH battery because of its excellent property. But the performances at high temperature(above 50 ℃) is still not satisfied. In the present paper,the effect of element erbium,used as additive by different methods to prepare positive electrode,on the high temperature performances of the Ni-MH batteries is studied. It is found that the charge acceptance ability of the spherical Ni(OH)2 electrode with element erbium as additive is improved. The discharge capacities of Ni(OH)2 coated with 1%(atomic fraction) Er(OH)3 and mechanically added with 1%(atomic fraction) Er2O3 at 1C are 12.6% and 11.7%,respectively,higher than those of the samples without erbium at 70 ℃.展开更多
According to the working condition of high temperature oxidation and sulphidation corrosion of the ZG35Cr24Ni7SiN heat resisting stainless steel used for reducing retort in magnesium refining, and the practical situa...According to the working condition of high temperature oxidation and sulphidation corrosion of the ZG35Cr24Ni7SiN heat resisting stainless steel used for reducing retort in magnesium refining, and the practical situation which the weld metal between the body and cover of reducing retort must possess resisting high temperature oxidation and corrosion, a kind of RM 1 type coated electrode for reducing retorts in magnesium refining with special alloying system and excellent usability has been developed. The RM 1 coated electrode is made of H0Cr21Ni10 wire core and is alloyed chromium and nickel simultaneously through coating material and wire core and some rare earth oxides are added in coating material. The electrode has been verified to be satisfied the operation requirements of practical production.展开更多
基金supported by the 863 National Research and Development Project Foundation of China (2006AA11A151)
文摘Effects of flaky rare earth oxide additives including Er2O3,Tm2O3,and Yb2O3,Lu2O3 on high temperature and high rate discharge performance of nickel electrodes were investigated.The discharge efficiency at 0.2C reached 96% at 60 oC for electrodes with 1 at.% flaky rare earth oxides.The high rate discharge performance for electrodes with flaky rare earth oxides were improved significantly,for example,discharge efficiency at 5C improved from 50% to 70%.The results showed that the end charging potential of the ...
文摘The rapid development of electric vehicles demands the development of high performance nickel metal hydride battery that is able to endure high temperature. The discharge properties of Ti 0.7 Zr 0.5 V 0.2 Mn 1.8- x Ni x ( x =0.4, 0.8, 1.1, 1.4, 1.7)hydrogen storage alloys was investigated and its phase composition was analyzed using X ray diffraction. The results show that the cycling life was improved as the content of nickel increases. When x =0.4, 0.8, 1.1 and 1.4, the main phase is MgZn 2 type C14 Laves phase and the second one is cubic TiNi phase. When x =1.7, the Laves phase structure disappears. EDAS analysis shows that the increase of nickel content is effective in suppressing the dissolution of vanadium component in alloys. [
基金financially supported by the National Science Foundation of China, China (22179130, 91834301)the Foundation of the Key Laboratory of Chinese Academy of Sciences (CXJJ21S024)Dalian Institute of Chemical Physics, China (DICPI202023)。
文摘Engineering failure of membrane electrode assembly caused by increasingly fuel poisoning in the high temperature polymer electrolyte membrane fuel cells fed with humidified reformate gases is firstly demonstrated herein this work. Based on the results of the in-situ environmental scanning electron microscope, electrochemical analyses, and limiting current method, a water-induced phosphoric acid invasion model is constructed in the porous electrode to elucidate the failure causations of the hindered hydrogen mass transport and the enhanced carbon monoxide poisoning. To optimize the phosphoric acid distribution under the inevitably humidified circumstance, a facile and effective strategy of constructing acid-proofed electrode is proposed and demonstrates outstanding stability with highly humidified reformate gases as anode fuel. This work discusses a potential defect that was rarely studied previously under practical working circumstance for high temperature polymer electrolyte membrane fuel cells, providing an alternative opinion of electrode design based on the fundamental aspects towards the engineering problems.
文摘Different types of ABPBI (poly(2,5-benzimidazole)) membranes and polymer binders were evaluated to investigate the performance of MEAs for high temperature proton exchange membrane fuel cell (HT-PEMFC). The properties of the prepared MEAs were evaluated and analyzed by polarization curve, electrochemistry impedance spectroscopy (EIS), cyclic voltammetry (CV) and durability test. The results showed that MEA with modified ABPBI membrane (AM) has satisfactory performance and durability for fuel cell application. Compare to conventional PBI or Nafion binders, polytetrafluoroethylene (PTFE) and polyvinylidene difluoride (PVDF) are more attractive as binders in the catalyst layer (CL) of gas diffusion electrode (GDE) for HT-PEMFC.
文摘Thermodynamic concepts required for the thermodynamic calculation of the potentials of electrodes for high temperature applications are briefly reviewed. A thermodynamic approach to the calculation of half cell potentials and the standard chemical potential of an electron at high temperatures which are related to the Standard Hydrogen Electrode(SHE) is discussed. As examples, an external Ag/AgCl reference electrode and a YSZ(Ag|O_2) pH sensor for high temperature applications are analyzed by using the thermodynamic approach to derive a high temperature pH measurement equation. The two electrodes are employed to measure high temperature pH and the measured pH was compared with the calculated pH by using a solution chemistry method. Concepts and principles for electrode kinetics are also briefly introduced and a modification to the Tafel equations is suggested.
基金Project(2006AA11A151) supported by the National Hi-Tech Research and Development Program of China
文摘The Co(Ⅲ)-coated spherical nickel hydroxide powder is optimum as positive electrode of high power Ni-MH battery because of its excellent property. But the performances at high temperature(above 50 ℃) is still not satisfied. In the present paper,the effect of element erbium,used as additive by different methods to prepare positive electrode,on the high temperature performances of the Ni-MH batteries is studied. It is found that the charge acceptance ability of the spherical Ni(OH)2 electrode with element erbium as additive is improved. The discharge capacities of Ni(OH)2 coated with 1%(atomic fraction) Er(OH)3 and mechanically added with 1%(atomic fraction) Er2O3 at 1C are 12.6% and 11.7%,respectively,higher than those of the samples without erbium at 70 ℃.
文摘According to the working condition of high temperature oxidation and sulphidation corrosion of the ZG35Cr24Ni7SiN heat resisting stainless steel used for reducing retort in magnesium refining, and the practical situation which the weld metal between the body and cover of reducing retort must possess resisting high temperature oxidation and corrosion, a kind of RM 1 type coated electrode for reducing retorts in magnesium refining with special alloying system and excellent usability has been developed. The RM 1 coated electrode is made of H0Cr21Ni10 wire core and is alloyed chromium and nickel simultaneously through coating material and wire core and some rare earth oxides are added in coating material. The electrode has been verified to be satisfied the operation requirements of practical production.