Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bendin...Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bending tests had been applied after different freezing-thawing cycles（0,50,100,150,200 and 300 cycles,respectively）.The results showed that residual flexural strength of UHTCC after 300 freezing-thawing cycles was 10.62 MPa（70% of no freezing thawing ones）,while 1.58 MPa（17% of no freezing thawing ones） for SFRC.Flexural toughness of UHTCC decreased by 17%,while 70% for SFRC comparatively.It has been demonstrated experimentally that UHTCC without any air-entraining agent could resist freezing-thawing and retain its high toughness characteristic in cold environment.Consequently,UHTCC could be put into practice for new-built or retrofit of infrastructures in cold regions.展开更多
Uniaxial compression tests were conducted to characterize the main compressive performance of ultra high toughness cementitious composite （UHTCC） in terms of strength and toughness and to obtain its stress-strain re...Uniaxial compression tests were conducted to characterize the main compressive performance of ultra high toughness cementitious composite （UHTCC） in terms of strength and toughness and to obtain its stress-strain relationships. The compressive strength investigated ranges from 30 MPa to 60 MPa. Complete stress-strain curves were directly obtained, and the strength indexes, including uniaxial compressive strength, compressive strain at peak stress, elastic modulus and Poisson＇s ratio, were calculated. The comparisons between UHTCC and matrix were also carried out to understand the fiber effect on the compressive strength indexes. Three dimensionless toughness indexes were calculated, which either represent its relative improvement in energy absorption capacity because of fiber addition or provide an indication of its behavior relative to a rigid-plastic material. Moreover, two new toughness indexes, which were named as post-crack deformation energy and equivalent compressive strength, were proposed and calculated with the aim at linking up the compressive toughness of UHTCC with the existing design concept of concrete. The failure mode was also given. The study production provides material characteristics for the practical engineering application of UHTCC.展开更多
A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hard...A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hardening and multiple cracking behavior in the hardened state, was developed through controlling flow properties of fresh mortar matrix at constant ingredients concentrations determined by micromechanical design and ensuring uniform fibers dispersion. The superplasticizer was utilized to adjust its flow properties in the fresh state. A series of flow tests, including deformability test, flow rate test, and self-placing test, were conducted to characterize and quantify the fluidity performance of fresh mortar matrix and self-compactability of fresh UHTCC. It is revealed that the utilization of superplasticizer is efficient in producing the fresh mortar matrix with desirable fluidity and the resulting self-compacting UHTCC. In addition, results of four point bending tests on the developed self-compacting UHTCC confirm the insensitivity of mechanical performance of self-compacting UHTCC to the presence of external vibrations as well as the flexural characteristics of deformation hardening and multiple cracking.展开更多
Ultrahigh toughness cementitious composites (UHTCC) obviously show strain hardening property under tensile or bending loading. The failure pattern of the UHTCC components exhibits multiple fine cracks under uniaxial t...Ultrahigh toughness cementitious composites (UHTCC) obviously show strain hardening property under tensile or bending loading. The failure pattern of the UHTCC components exhibits multiple fine cracks under uniaxial tensile loading with prominent tensile strain capacity in excess of 3%, with merely 60 μm average crack width even corresponding to the ultimate tensile strain state. The approach adopted is based on the concept of functionally-graded concrete, where part of the concrete, which surrounds the main longitudinal reinforcement in a RC (reinforced concrete) member, is strategically replaced with UHTCC with excellent crack-controlling ability. Investigations on bending behavior of functionally-graded composite beam crack controlled by UHTCC has been carried out, including theo- retical analysis, experimental research on long composite beams without web reinforcement, validation and comparison between experimental and theoretical results, and analysis on crack control. In addition to improving bearing capacity, the results indicate that functionally-graded composite beams using UHTCC has been found to be very effective in preventing corrosion-induced damage compared with RC beams. Therefore, durability and service life of the structure could be enhanced. This paper discusses the development of internal force and crack propagation during loading process, and presents analysis of the internal force in different stages, moment-curvature relationship from loading to damage and calculation of mid-span deflection and ductility index. In the end, the theoretical formulae have been validated by experimental results.展开更多
UHTCC (ultrahigh toughness cementitious composite), which is a kind of ultrahigh toughness cemen- titious composites material, exhibits pseudo strain hardening feature when subjected to tension load, and has enormous ...UHTCC (ultrahigh toughness cementitious composite), which is a kind of ultrahigh toughness cemen- titious composites material, exhibits pseudo strain hardening feature when subjected to tension load, and has enormous ductility and prominent crack dispersal ability. Accordingly, UHTCC can improve mechanical behavior of ordinary concrete structure especially its durability, and has been regarded as historical breakthrough to traditional cementitious materials. In this paper, the study focuses on flexure behavior of steel reinforced beam made of UHTCC. Based on the plane section assumption, along with two equilibrium equations of force and moment, the formulae to calculate the flexural load capability for the reinforced ultrahigh toughness cementitious composite (RUHTCC) beam were developed under the assumption that the compression stress- strain relationship in the UHTCC material is a bilinear model. Following this, the simplified formulae were further evolved by effective rectangle stress distribution approach in order to facilitate design of practical engineering. Two effective parameters introduced in effective rectangle approach were determined. The mathematical expressions to evaluate limited rein- forcement ratio, flexural stiffness as well as ductility index were proposed, too. Last, two series of dif- ferent reinforcement ratios of the RUHTCC beams were tested in four-point flexure loading. For com- parison purposes, ordinary RC (reinforced concrete) beams also were prepared. Both moment curva- ture curves and load mid-span displacement curves were recorded and compared with the theoretical calculations. A good agreement between them was found, which validates the proposed theoretical formulae. For ductility index, a slightly big difference between the experimental values and the calcu- lated ones exists. The experimental results show that, compared to control RC beams, the RUHTCC beam can improve both flexural capacity and ductility index, and the degree of improvement will de- crease with the increase in the reinforcement ratio. Particularly, the results also reveal that lager crack width in control beams can be greatly reduced by formation of tightly-spaced fine cracks in UHTCC, which offers more durable structures.展开更多
基金Funded by the Key Program of National Natural Science Foundation of China (No.50438010)
文摘Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bending tests had been applied after different freezing-thawing cycles（0,50,100,150,200 and 300 cycles,respectively）.The results showed that residual flexural strength of UHTCC after 300 freezing-thawing cycles was 10.62 MPa（70% of no freezing thawing ones）,while 1.58 MPa（17% of no freezing thawing ones） for SFRC.Flexural toughness of UHTCC decreased by 17%,while 70% for SFRC comparatively.It has been demonstrated experimentally that UHTCC without any air-entraining agent could resist freezing-thawing and retain its high toughness characteristic in cold environment.Consequently,UHTCC could be put into practice for new-built or retrofit of infrastructures in cold regions.
基金Funded by the Key Program of National Natural Science Foundation of China( No.50438010)the Research & Application of Key Technology for the South-North Water Transfer Project Construction in China ( JGZXJJ2006-13)
文摘Uniaxial compression tests were conducted to characterize the main compressive performance of ultra high toughness cementitious composite （UHTCC） in terms of strength and toughness and to obtain its stress-strain relationships. The compressive strength investigated ranges from 30 MPa to 60 MPa. Complete stress-strain curves were directly obtained, and the strength indexes, including uniaxial compressive strength, compressive strain at peak stress, elastic modulus and Poisson＇s ratio, were calculated. The comparisons between UHTCC and matrix were also carried out to understand the fiber effect on the compressive strength indexes. Three dimensionless toughness indexes were calculated, which either represent its relative improvement in energy absorption capacity because of fiber addition or provide an indication of its behavior relative to a rigid-plastic material. Moreover, two new toughness indexes, which were named as post-crack deformation energy and equivalent compressive strength, were proposed and calculated with the aim at linking up the compressive toughness of UHTCC with the existing design concept of concrete. The failure mode was also given. The study production provides material characteristics for the practical engineering application of UHTCC.
基金Funded by the Key Program of the National Natural Science Foundation of China (50438010)the National Natural Science Foundation for Youth(50908029)the Research and Application Program of Key Technologies for Major Constructions in the South-North Water Transfer Project Construction in China (JGZXJJ2006-13)
文摘A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hardening and multiple cracking behavior in the hardened state, was developed through controlling flow properties of fresh mortar matrix at constant ingredients concentrations determined by micromechanical design and ensuring uniform fibers dispersion. The superplasticizer was utilized to adjust its flow properties in the fresh state. A series of flow tests, including deformability test, flow rate test, and self-placing test, were conducted to characterize and quantify the fluidity performance of fresh mortar matrix and self-compactability of fresh UHTCC. It is revealed that the utilization of superplasticizer is efficient in producing the fresh mortar matrix with desirable fluidity and the resulting self-compacting UHTCC. In addition, results of four point bending tests on the developed self-compacting UHTCC confirm the insensitivity of mechanical performance of self-compacting UHTCC to the presence of external vibrations as well as the flexural characteristics of deformation hardening and multiple cracking.
基金Supported by the Key Program of the National Natural Science Foundation of China (Grant No.50438010)the Research and Application Programs of Key Technologies for Major Constructions in the South-North Water Transfer Project Construction in China (Grant No.JGZXJJ2006-13)
文摘Ultrahigh toughness cementitious composites (UHTCC) obviously show strain hardening property under tensile or bending loading. The failure pattern of the UHTCC components exhibits multiple fine cracks under uniaxial tensile loading with prominent tensile strain capacity in excess of 3%, with merely 60 μm average crack width even corresponding to the ultimate tensile strain state. The approach adopted is based on the concept of functionally-graded concrete, where part of the concrete, which surrounds the main longitudinal reinforcement in a RC (reinforced concrete) member, is strategically replaced with UHTCC with excellent crack-controlling ability. Investigations on bending behavior of functionally-graded composite beam crack controlled by UHTCC has been carried out, including theo- retical analysis, experimental research on long composite beams without web reinforcement, validation and comparison between experimental and theoretical results, and analysis on crack control. In addition to improving bearing capacity, the results indicate that functionally-graded composite beams using UHTCC has been found to be very effective in preventing corrosion-induced damage compared with RC beams. Therefore, durability and service life of the structure could be enhanced. This paper discusses the development of internal force and crack propagation during loading process, and presents analysis of the internal force in different stages, moment-curvature relationship from loading to damage and calculation of mid-span deflection and ductility index. In the end, the theoretical formulae have been validated by experimental results.
基金Supported by the Key Program of the National Natural Science Foundation of China (Grant No. 50438010)the Research and Application Programs of Key Technolo-gies for Major Constructions in the South-North Water Transfer Project Construction in China (Grant No. JGZXJJ2006-13)
文摘UHTCC (ultrahigh toughness cementitious composite), which is a kind of ultrahigh toughness cemen- titious composites material, exhibits pseudo strain hardening feature when subjected to tension load, and has enormous ductility and prominent crack dispersal ability. Accordingly, UHTCC can improve mechanical behavior of ordinary concrete structure especially its durability, and has been regarded as historical breakthrough to traditional cementitious materials. In this paper, the study focuses on flexure behavior of steel reinforced beam made of UHTCC. Based on the plane section assumption, along with two equilibrium equations of force and moment, the formulae to calculate the flexural load capability for the reinforced ultrahigh toughness cementitious composite (RUHTCC) beam were developed under the assumption that the compression stress- strain relationship in the UHTCC material is a bilinear model. Following this, the simplified formulae were further evolved by effective rectangle stress distribution approach in order to facilitate design of practical engineering. Two effective parameters introduced in effective rectangle approach were determined. The mathematical expressions to evaluate limited rein- forcement ratio, flexural stiffness as well as ductility index were proposed, too. Last, two series of dif- ferent reinforcement ratios of the RUHTCC beams were tested in four-point flexure loading. For com- parison purposes, ordinary RC (reinforced concrete) beams also were prepared. Both moment curva- ture curves and load mid-span displacement curves were recorded and compared with the theoretical calculations. A good agreement between them was found, which validates the proposed theoretical formulae. For ductility index, a slightly big difference between the experimental values and the calcu- lated ones exists. The experimental results show that, compared to control RC beams, the RUHTCC beam can improve both flexural capacity and ductility index, and the degree of improvement will de- crease with the increase in the reinforcement ratio. Particularly, the results also reveal that lager crack width in control beams can be greatly reduced by formation of tightly-spaced fine cracks in UHTCC, which offers more durable structures.
