Efficient and reliable removal of cellulose,hemicellulose and lignin,that are the major organic pollutants in the wastewater from regenerated fiber,is critically important to prevent toxicity discharge.Low-and high-pH...Efficient and reliable removal of cellulose,hemicellulose and lignin,that are the major organic pollutants in the wastewater from regenerated fiber,is critically important to prevent toxicity discharge.Low-and high-pH stresses sometimes occur in the effluent treatment systems due to the use of a large amount of acid and alkaline in the pulping process.Using flat separation method to select high-yield strains from bio-contact oxidation basin,seeing configuration of the strains and doing some physiological experiments,we found that the strains contain two kinds of main bacteria,Zoogloea sp.and Pseudomona sp.We also discovered the best growing time by spectrophotometer.The best growing time is at 0～32h,the logarithmic phase is about at 12～32h,and the stable growth phase is about 32～60h.Furthermore,we concluded that the disposal ability of high-yield strain is better than the ordinary one by doing parallel experiment.Through orthogonal test we also confirmed that the best growing temperature and pH value are 29℃and 7.3 respectively.The COD removal rate is about 93% when the biomembrane is in good condition.展开更多
To understand the high strain rate deformation mechanism and determine the grain size,strain rate and porosity dependent yield strength of nanocrystalline materials,a new mechanical model based on the deformation mech...To understand the high strain rate deformation mechanism and determine the grain size,strain rate and porosity dependent yield strength of nanocrystalline materials,a new mechanical model based on the deformation mechanism of nanocrystalline materials under high strain rate loading was developed.As a first step of the research,the yield behavior of the nanocrystalline materials under high strain rate loading was mainly concerned in the model and uniform deformation was assumed for simplification.Nanocrystalline materials were treated as composites consisting of grain interior phase and grain boundary phase,and grain interior and grain boundary deformation mechanisms under high strain rate loading were analyzed,then Voigt model was applied to coupling grain boundary constitutive relation with mechanical model for grain interior phase to describe the overall yield mechanical behavior of nanocrystalline materials.The predictions by the developed model on the yield strength of nanocrysatlline materials at high strain rates show good agreements with various experimental data.Further discussion was presented for calculation results and relative experimental observations.展开更多
The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and...The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and positive,respectively.展开更多
With the development of technology for earthquake resistant,the research of the low yield point(LYP) steel which used for the fabrication of energy dissipation damper were paid more and more attention.The common studi...With the development of technology for earthquake resistant,the research of the low yield point(LYP) steel which used for the fabrication of energy dissipation damper were paid more and more attention.The common studies of the low yield point steel is mainly about the performance with constant amplitude and constant frequency.The low cycle fatigue properties of low yield piont steel were studied by series of test with continuous varying amplitude and varying frequency with the materials testing system by us.The test results showed that low yield point steel of Baosteel have excellent low cycle fatigue properties,which meet the requirement for steel used for the fabrication of energy dissipation damper completely.The low cycle fatigue performance of low yield point steel of Baosteel mainly depended on the amplitude in test.And the effect of varying frequency for the low yield point steel was more less than varying amplitude.展开更多
文摘Efficient and reliable removal of cellulose,hemicellulose and lignin,that are the major organic pollutants in the wastewater from regenerated fiber,is critically important to prevent toxicity discharge.Low-and high-pH stresses sometimes occur in the effluent treatment systems due to the use of a large amount of acid and alkaline in the pulping process.Using flat separation method to select high-yield strains from bio-contact oxidation basin,seeing configuration of the strains and doing some physiological experiments,we found that the strains contain two kinds of main bacteria,Zoogloea sp.and Pseudomona sp.We also discovered the best growing time by spectrophotometer.The best growing time is at 0～32h,the logarithmic phase is about at 12～32h,and the stable growth phase is about 32～60h.Furthermore,we concluded that the disposal ability of high-yield strain is better than the ordinary one by doing parallel experiment.Through orthogonal test we also confirmed that the best growing temperature and pH value are 29℃and 7.3 respectively.The COD removal rate is about 93% when the biomembrane is in good condition.
基金Project(10502025) supported by the National Natural Science Foundation of ChinaProject(101005) supported by Fok Ying Tong Education FoundationProject(BK2007528) supported by the Natural Science Foundation of Jiangsu Province,China
文摘To understand the high strain rate deformation mechanism and determine the grain size,strain rate and porosity dependent yield strength of nanocrystalline materials,a new mechanical model based on the deformation mechanism of nanocrystalline materials under high strain rate loading was developed.As a first step of the research,the yield behavior of the nanocrystalline materials under high strain rate loading was mainly concerned in the model and uniform deformation was assumed for simplification.Nanocrystalline materials were treated as composites consisting of grain interior phase and grain boundary phase,and grain interior and grain boundary deformation mechanisms under high strain rate loading were analyzed,then Voigt model was applied to coupling grain boundary constitutive relation with mechanical model for grain interior phase to describe the overall yield mechanical behavior of nanocrystalline materials.The predictions by the developed model on the yield strength of nanocrysatlline materials at high strain rates show good agreements with various experimental data.Further discussion was presented for calculation results and relative experimental observations.
文摘The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and positive,respectively.
文摘With the development of technology for earthquake resistant,the research of the low yield point(LYP) steel which used for the fabrication of energy dissipation damper were paid more and more attention.The common studies of the low yield point steel is mainly about the performance with constant amplitude and constant frequency.The low cycle fatigue properties of low yield piont steel were studied by series of test with continuous varying amplitude and varying frequency with the materials testing system by us.The test results showed that low yield point steel of Baosteel have excellent low cycle fatigue properties,which meet the requirement for steel used for the fabrication of energy dissipation damper completely.The low cycle fatigue performance of low yield point steel of Baosteel mainly depended on the amplitude in test.And the effect of varying frequency for the low yield point steel was more less than varying amplitude.
