The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the...The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the type of melts and temperature have been studied.The mechanisms of refractory corrosion by the used melts and the factors contributing to the inhibition of corrosion development have been investigated by the method of petrographic analysis.On the basis of obtained results,the use of high-alumina,chromic oxide,and AZS/Cr refractories in the sections of glass furnace linings,experiencing the intensive impact of aluminaboronsilicate glasses and basalt melts,has been confirmed and scientifically substantiated.展开更多
Bubble defects of glass were studied by Ruman spectrum, C equivalent of glass raw materials were analyzed by chemical method, and the solubility of sulphur in glass was determined with SC-132 Sulphur Determination.. T...Bubble defects of glass were studied by Ruman spectrum, C equivalent of glass raw materials were analyzed by chemical method, and the solubility of sulphur in glass was determined with SC-132 Sulphur Determination.. Then, the relationship between glass bubble, the redox numbers of glass batch and the solubility of sulphur in float glass were discussed. The way that can improve the quality of float glass was found.展开更多
Color is an important tool for glass industry to let the product gain additional aesthetic and functional properties forced by the market demands. In this context, it is necessary to understand the color forming mecha...Color is an important tool for glass industry to let the product gain additional aesthetic and functional properties forced by the market demands. In this context, it is necessary to understand the color forming mechanism better in order to get target color and improve the yield. A detailed experimental study to investigate the relationship between the manganese content on color formation and the redox condition was carried out. All experiments were carried out at different level of iron and manganese oxides. Color parameters （dominant wavelength, brightness （%）, purity （%） and L-a-b values） were examined for large interval of batch redoxes. In this paper, the results of above mentioned experimental studies were discussed together.展开更多
The energy required for continuous glass melting usually accounts for about 30~75% of the total energy consumptions supplied to the glass industry, and the energy cost contributes to about 10~25% of total glass manufa...The energy required for continuous glass melting usually accounts for about 30~75% of the total energy consumptions supplied to the glass industry, and the energy cost contributes to about 10~25% of total glass manufacturing cost depending upon the type of glass and manufacturing efficiency. Typically, energy efficiency of glass furnaces offers major opportunities for manufacturing cost reduction.Significant rising of energy cost, environmental requirements for clean air and pressure for reducing global warming and carbon dioxide emissions, as well as the cost of capitals are main drivers for the technology developments. In this paper, energy efficiency of glass furnaces is discussed. Technology developments in selective batching, oxy-fuel firing with preheating batch and cullet, non-conventional advanced melting systems, such as segmented glass melting and submerged combustion melting, as well as using math modeling to optimize fuel distribution for energy savings are presented.展开更多
文摘The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the type of melts and temperature have been studied.The mechanisms of refractory corrosion by the used melts and the factors contributing to the inhibition of corrosion development have been investigated by the method of petrographic analysis.On the basis of obtained results,the use of high-alumina,chromic oxide,and AZS/Cr refractories in the sections of glass furnace linings,experiencing the intensive impact of aluminaboronsilicate glasses and basalt melts,has been confirmed and scientifically substantiated.
文摘Bubble defects of glass were studied by Ruman spectrum, C equivalent of glass raw materials were analyzed by chemical method, and the solubility of sulphur in glass was determined with SC-132 Sulphur Determination.. Then, the relationship between glass bubble, the redox numbers of glass batch and the solubility of sulphur in float glass were discussed. The way that can improve the quality of float glass was found.
文摘Color is an important tool for glass industry to let the product gain additional aesthetic and functional properties forced by the market demands. In this context, it is necessary to understand the color forming mechanism better in order to get target color and improve the yield. A detailed experimental study to investigate the relationship between the manganese content on color formation and the redox condition was carried out. All experiments were carried out at different level of iron and manganese oxides. Color parameters （dominant wavelength, brightness （%）, purity （%） and L-a-b values） were examined for large interval of batch redoxes. In this paper, the results of above mentioned experimental studies were discussed together.
文摘The energy required for continuous glass melting usually accounts for about 30~75% of the total energy consumptions supplied to the glass industry, and the energy cost contributes to about 10~25% of total glass manufacturing cost depending upon the type of glass and manufacturing efficiency. Typically, energy efficiency of glass furnaces offers major opportunities for manufacturing cost reduction.Significant rising of energy cost, environmental requirements for clean air and pressure for reducing global warming and carbon dioxide emissions, as well as the cost of capitals are main drivers for the technology developments. In this paper, energy efficiency of glass furnaces is discussed. Technology developments in selective batching, oxy-fuel firing with preheating batch and cullet, non-conventional advanced melting systems, such as segmented glass melting and submerged combustion melting, as well as using math modeling to optimize fuel distribution for energy savings are presented.
