Collision and attachment behavior between fine cassiterite particles and H_2 bubbles

Particle-bubble interaction during electro-flotation of cassiterite was investigated by determining the recovery of cassiterite and the collision mechanism of cassiterite particle and H2 bubble. Flotation tests at different conditions were conducted in a single bubble flotation cell. The recovery of cassiterite was found to be affected by cassiterite particle and bubble size. A matching range, in which the best recovery can be obtained, was found between particle and bubble size. Collision, attachment, and detachment of the particle-bubble were observed and captured by a high-speed camera. Particle-bubble collision and attachment were analyzed with the use of particle-bubble interaction theory to obtain the experimental results. An attachment model was introduced and verified through the photos captured by the high-speed camera. A bridge role was observed between the bubbles and particles. Particle-bubble interaction was found to be affected by bubble size and particle size, which significantly influenced not only the collision and attachment behavior of the particles and bubbles but also the flotation recovery of fine cassiterite particles.

Effects of supersonic fine particles bombarding on thermal barrier coatings after isothermal oxidation

This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond coat before applying the topcoat.After isothermal oxidation at 1000 °C for different time,the surface state of the bond coat and its phase transformation were investigated using X-ray diffraction（XRD）,scanning electron microscopy（SEM） equipped with energy-dispersive X-ray spectrometry（EDS）,transmission electron microscopy（TEM） and Cr3＋ luminescence spectroscopy.The dislocation density significantly increases after SFPB process,which can generate a large number of diffusion channels in the area of the surface of the bond coat.At the initial stage of isothermal oxidation,the diffusion velocity of Al in the bond coat significantly increases,leading to the formation of a layer of stable α-Al2O3 phase.A great number of Cr3＋ positive ions can diffuse via diffusion channels during the transient state of isothermal oxidation,which can lead to the presence of（Al0.9Cr0.1）2O3 phase and accelerate the γ→θ→α phase transformation.Cr3＋ luminescence spectroscopy measurement shows that the residual stress increases at the initial stage of isothermal oxidation and then decreases.The residual stress after isothermal oxidation for 310 h reduces to 0.63 GPa compared with 0.93 GPa after isothermal oxidation for 26 h.In order to prolong the lifespan of TBCs,a layer of continuous,dense and pure α-Al2O3 with high oxidation resistance at the interface between topcoat and bond coat can be obtained due to additional SFPB process.

Diurnal variation of number concentration and size distribution of ultrafine particles in the urban atmosphere of Beijing in winter

Number concentration and distribution of airborne particles in the size range 5.6 to 560 nm diameter were measured in Beijing for a 15-d period in winter 2005. Dally average number concentrations of nucleation mode （5.6-20 um）, Aitken mode （20-100 um）, and accumulation mode （100-560 um） particles, and total particles were 17500, 32000, 4000, and 53500 cm^-3, respectively. Average particle size distribution was monomodal with a mode diameter of about 40 um at night and bimodal with mode diameters of about 10 and about 40 um during the daytime. New particle formation events, which were connected to diurnal variation of nucleation mode particles, were observed in more than half of the observation days. The events often started around 10：00-11：00 Chinese Standard Time （CST） and ended up after 3-4 h. Concentrations of Aitken and accumulation mode particles increased from midnight and reached their maxima at about 10：00 CST, and then decreased and became the lowest in the afternoon. Analysis of diurnal cycles in traffic volume and meteorological parameters revealed that the accumulation of the particles in Aitken and accumulation modes in the morning was influenced by formation of an inversion and increase in vehicle emission, and dispersion of such particles in the afternoon was associated with more effective vertical mixing and higher wind speed.

Chemical composition and quantitative relationship between meteorological condition and fine particles in Beijing

The recent year's monitor results of Beijing indicated that the pollution level of fine particles PM 2.5 showed an increasing trend. To understand pollution characteristics of PM 2.5 and its relationship with the meteorological conditions in Beijing, a one-year monitoring of PM 2.5 mass concentration and correspondent meteorological parameters was performed in Beijing in 2001. The PM 2.5 levels in Beijing were very high, the annual average PM 2.5 concentration in 2001 was 7 times of the National Ambient Air Quality Standards proposed by US EPA. The major chemical compositions were organics, sulfate, crustals and nitrate. It was found that the mass concentrations of PM 2.5 were influenced by meteorological conditions. The correlation between the mass concentrations of PM 2.5 and the relative humidity was found. And the correlation became closer at higher relative humidity. And the mass concentrations of PM 2.5 were negtive-correlated to wind speeds, but the correlation between the mass concentration of PM 2.5 and wind speed was not good at stronger wind.

Particle size distribution and property of bacteria attached to carbon fines in drinking water treatment

The quantitative change and size distribution of particles in the effluents from a sand filter and a granular activated carbon （GAC） filter in a drinking water treatment plant were investigated. The average total concentration of particles in the sand filter effluent during a filter cycle was 148 particles/mL, 27 of which were larger than 2 μm in size. The concentration in the GAC effluent （561 particles/mL） was significantly greater than that in the sand filter effluent. The concentration of particles larger than 2 μm in the GAC filter effluent reached 201 particles/mL, with the amount of particles with sizes between 2 μm and 15 μm increasing. The most probable number （MPN） of carbon fines reached 43 unit/L after six hours and fines between 0.45 μm and 8.0 μm accounted for more than 50%. The total concentration of outflowing bacteria in the GAC filter effluent, 350 CFU （colony-forming units） /mL, was greater than that in the sand filter effluent, 210 CFU/mL. The desorbed bacteria concentration reached an average of 310 CFU/mg fines. The disinfection efficiency of desorbed bacteria was lower than 40% with 1.5 mg/L of chlorine. The disinfection effect showed that the inactivation rate with 2.0 mg/L of chloramine （90%） was higher than that with chlorine （70%）. Experimental results indicated that the high particle concentration in raw water and sedimentation effluent led to high levels of outflowing particles in the sand filter effluent. The activated carbon fines in the effluent accounted for a small proportion of the total particle amount, but the existing bacteria attached to carbon fines may influence the drinking water safety. The disinfection efficiency of desorbed bacteria was lower than that of free bacteria with chlorine, and the disinfection effect on bacteria attached to carbon fines with chloramine was better than that with only chlorine.

Monitoring of Pollution of Air Fine Particles (PM2.5) and Study on Their Genetic Toxicity

Objective To compare PM2.5 pollation level between the city of coal-fuel pollution (Taiyuan) and the city of pollution mixed with coal fuels and vehicle exhausts (Beijing), to analyze the concentration of B[a]p and Pb in the pollutants, and to study the DNA damage by PM2.5. Methods Air fine particles (PM2.5) were collected in Beijing and Taiyuan by means of the filter membrane method, the concentration of B[a]p and Pb were analyzed by high performance liquid chromatography and atomic absorption spectroscopy respectveily, and the damage of DNA by PM2.5 was detected by single cell gel-electrophoresis (SCGE) using the human lung epithelial cells (A549) as target cells. Results The concentration of PM2.5 in the winter of Beijing was 0.028-0.436 mg/m3, and that in Taiyuan was 0.132-0.681 mg/m3. The concentration of B[a]p was 0.104 and 0.156 礸/mg on PM2.5 of Beijing and Taiyuan, respectively, whereas the concentration of Pb was 1.094 and 1.137 礸/mg on PM2.5 of Beijing and Taiyuan, respectively. Exposure to PM2.5 at the concentrations of 5, 50, and 200 礸/mL for 12 h and 24 h caused DNA damage of the human alveolar epithelium, and the ratios of the tailing and length of the tail were all significantly different from those of the negative control group (P<0.05), and indicated a dose-response relationship. Conclusion PM2.5 has certain genetic toxicity.

Preparation of Fine Spherical Particle Sized Ceria by Precipitation Method with Ammonium Bicarbonate

Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined between 400～700 ℃ analyzed by XRD and the aggregated particle size is about 300 nm measured by LASER particle sizer. SEM, TG-DTA and Zeta-potential analyzer were employed individually to study the morphology and the formation of CeO_2 product. It was found that excess NH_4NO_3 can serve as an sphericallization agent to prepare spherical CeO_2 powder by precipitation method.

Growth Rates of Fine Aerosol Particles at a Site near Beijing in June 2013

Growth of fine aerosol particles is investigated during the Aerosol-CCN-Cloud Closure Experiment campaign in June 2013 at an urban site near Beijing. Analyses show a high frequency （- 50%） of fine aerosol particle growth events, and show that the growth rates range from 2.1 to 6.5 nm h-1 with a mean value of - 5.1 nm h-1. A review of previous studies indicates that at least four mechanisms can affect the growth of fine aerosol particles： vapor condensation, intramodal coagulation, extramodal coagulation, and multi-phase chemical reaction. At the initial stage of fine aerosol particle growth, condensational growth usually plays a major role and coagulation efficiency generally increases with particle sizes. An overview of previous studies shows higher growth rates over megacity, urban and boreal forest regions than over rural and oceanic regions. This is most likely due to the higher condensational vapor, which can cause strong condensational growth of fine aerosol particles. Associated with these multiple factors of influence, there are large uncertainties for the aerosol particle growth rates, even at the same location.

Nano-microbubble flotation of fine and ultrafine chalcopyrite particles

As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles （nanobuhbles and microbubbles） on the flotation of fine （-38 ＋ 14.36 μm） and ultrafine （-14.36 ＋ 5μm） chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nano- microbubble generator based on the cavitation phenomenon in Venturi tubes. In order to better under- stand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nano- bubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16-21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles （-14.36 ＋ 5 μm） more than that of fine particles （-38 ＋ 14.36 μm）. Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%, respectively.

Ferronickel enrichment by fine particle reduction and magnetic separation from nickel laterite ore

Ferronickel enrichment and extraction from nickel laterite ore were studied through reduction and magnetic separation. Reduction experiments were performed using hydrogen and carbon monoxide as reductants at different temperatures （700-1000℃）. Magnetic separa- tion of the reduced products was conducted using a SLon-100 cycle pulsating magnetic separator （1.2 T）. Composition analysis indicates that the nickel laterite ore contains a total iron content of 22.50wt% and a total nickel content of 1.91wt%. Its mineral composition mainly con- sists of serpentine, hortonolite, and goethite. During the reduction process, the grade of nickel and iron in the products increases with in- creasing reduction temperature. Although a higher temperature is more favorable for reduction, the temperature exceeding 1000℃ results in sintering of the products, preventing magnetic separation. After magnetic separation, the maximum total nickel and iron concentrations are 5.43wt% and 56.86wt%, and the corresponding recovery rates are 84.38% and 53.76%, respectively.

Estimation of Fine Dust Particles Distribution in Machining Workshop Based on COwZ Model

Fine dust particles （diameter is less than 2.5 μm） generated during machining processes,especially dry cutting,are harmful to operators,because they remain suspended in the air for long time and have marked concentration gradients in workshop.Hence studies about cutting dust source states and indoor air quality prediction have been developed.However,few researches focus on the distribution state of the cutting dust,dynamic status of fine dust particles,and environment estimating of the machining workshop.The machining workshops have diversified architectural structures,complex working conditions,so the dust emission is sensitive dynamic.According to these features,after analysis of the static and dynamic influence factors,this paper proposes a method and establishes a model to estimate the fine dust particles distribution based on COwZ （COMIS （conjunction of multizone infiltration specialists） with sub-zones） model when only dry cutting is processed just needing various working parameters.And two key technologies are discussed：the description of the machine tools using sub-zones of COwZ model considering the local obstacle effects of machine tools themselves;description and implementation of dynamic process of cutting dust emission with a new concept of equivalent source strengths.At last,multi-point experiments in a hybrid ventilation machining workshop prove the method is practical.Good agreement was observed between the estimation results and the experimental measurements for the investigated conditions.The proposed method can supply reference data for green manufacturing.

Synthesis and Luminescence Properties of Pr^(3+) Doped Ca_xBa_(1-x)TiO_3 (0.3≤x<1) Fine Particles

CaxBa1-xTiO3 （CBT） fine particles doped with red luminescence center of Pr3＋ ions （Pr： CBT） were successfully synthesized by salt assisted spray pyrolysis （SASP） process. Scanning electronic microscope （SEM） and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr^3＋ ions doped CBT fine particles. The luminescence properties, such as photoluminescence （PL） and mechanoluminescence （ML）, of as-synthesized Pr： CBT particles were investigated. For Pr： CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr： CBT fine particles become stronger and stronger. When pressure was loaded on the Pr： CBT pellet, mechanoluminescence（ML） emission was measured. The results show that the ML intensity is proportional to the applied pressure.

Study on Separation of Water and Alumina Fine Particles by Cross-Flow Microfiltration

A cross-flow microfiltration process had been developed to separate alumina fine particles from the suspension using a stainless steel membrane tube with a pore size of 10 μm. The influence of cross-flow velocity and trans-membrane pressure on the permeate flux and the solid holdup in permeate had been investigated. It was found that both the permeate flux and the solid holdup in permeate decreased with time. Moreover, the permeate flux increased with an increasing transmembrane pressure but the influence of cross-flow velocity on the permeate flux was quite complex. Both the permeate flux and the solid holdup in permeate in long term filtration had been studied. The operation of cross-flow microfiltration could be carried out stably for 10 hours with the permeate flux values ranging from 520.5 to 936 L/(m^2·h) at rs=1%, while it could continue in 10 hours with the permeate flux values ranging from 226 to 432 L/(m^2·h) at rs=5%. The solid holdup in permeate had been less than 10 mg/L during the whole operating cycle.

Effect of Supersonic Fine Particles Bombarding on the Service Life of Thermal Barrier Coating

Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermediate metal layer will be the key factor in forming TGO with continuous,uniform and single-ingredient（Al2O3）.In this experiment,we bombarded particles on to the metallic bound layer.We studied the influence of supersonic particle bombardment on the diffusion of Al.We hope to control the growth of TGO by monitoring the diffusion of Al.Thermal barrier coating（TBC）,which consists of a NiCoCrAlY bond coat and a ZrO2-8Y2O3（wt.%） topcoat（TC）,is fabricated on the nickel-base superalloy by air plasma spray（APS）.NiCoCrAlY bond coat is treated by supersonic fine particles bombarding（SFPB）.The morphology,oxidation behavior of TBC and phase are characterized by scanning electron microscope（SEM） equipped with an energy dispersive spectromrter（EDS） and X-ray diffractometer（XRD）.The influence of supersonic fine particles bombarding technique on the service life of thermal barrier coating is studied.The results show that SFPB technique improves the flaw of excessive surface undulation in the as-sprayed bond coat.A continuous,uniform and single-ingredient（Al2O3） TGO can quickly form in the SFPB TBC during high temperature oxidation process.The thickening of TGO is relatively slow.These will effectively suppress the formation of other non-protective oxides.Therefore,SFPB technique reduces the growth stress level generated by the continuous growth of TGO,and also avoids the stress concentration induced by formation of the large particle spinal oxide.Thermal barrier coating still remains well after 350 thermal cycles.The service life of TBC is improved.The proposed research provides theoretical basis and technical references to further improve and enhance the SFPB technique.

Effects of supersonic fine particle bombarding on thermal cyclic failure lifetime of thermal barrier coating

Thermal barrier coating ( TBC) consisting of a NiCoCrAlY bond coat ( BC) and a ZrO2-8 wt. % Y2O3 topcoat ( TC) was fabricated on the nickel-base superalloy by air plasma spray ( APS) . The BC was treated by supersonic fine particle bombarding ( SFPB) . Thermal cyclic failure and residual stress in thermally grown oxide ( TGO) scale were studied by SEM with EDS and ruby fluorescence spectroscopy ( RFS) . As shown in the results,after treated by SFPB,thickening of TGO was relatively slow,which reduced the level of growth stress. The TBC with SFPB treatment was still remained well undergoing 350 times of thermal cycle. However,after thermal cycle with the same times,the separation of TC was observed in TBC without SFPB treatment. The residual stress analysis by RFS showed that the residual stress of SFPB-treated TBC increased with the increasing number of thermal cycle. The residual stress of conventional TBC reached a value of 650 MPa at 350 times of cycle and that of SFPB-treated TBC only reached 532 MPa at 400 times of cycle. The BC with SFPB treatment after 400 times of cycle was analyzed by RFS,the high stress value was not observed in local thickened region of TGO. Thermal cycling resistance of TBC can be improved by the SFPB technology.

Observation of fine particle aggregating behavior induced by high intensity conditioning using high speed CCD

The aggregating behavior between bubbles and particles induced by high intensity conditioning (HIC) was studied using high speed CCD technique. Bubble size measurement was conducted, and the attachment behavior between bubbles and particles in HIC cell and flotation cell were observed. The results show that in HIC cell, high intensity conditioning creates an advantage environment for the formation of small size bubble due to hydrodynamic cavitations, and these fine bubbles have high probability of bubble-particle collision, which will enhance fine particle flotation. The bubble-particle attachment experiments indicate that in high intensity conditioning cell, a lot of fine bubbles are produced in situ on the surface of fine particles, and most of fine particles are aggregated under the bridging action of fine bubbles. The observation of bubble-particle interaction in flotation cell illustrates that aggregates created by HIC can be loaded more easily by big air bubble in flotation cell than those created by normal conditioning.

Concentration Characteristics and Sources of Chemical Elements in Atmospheric Fine Particles (PM_(2.5)) in Autumn in Xi'an City

[Objective] The aim was to study the concentration characteristics and sources of chemical elements in atmospheric fine particles (PM2.5) in autumn in Xi’an City. [Method] By means of mini-volume sampler, PM2.5 samples in atmosphere in Xi’an were collected in October 2009, and the concentration characteristics and sources of elements in PM2.5 were analyzed. [Result] The average mass concentration of PM2.5 in atmosphere in autumn in Xi’an City was 168.44 μg/m3 which was higher than that of Beijing and Pearl River Delta area, and the minimum and maximum value were 53.29 and 358.16 μg/m3, respectively. The mass concentration of S, Zn, K, Cl, Ca and Fe in PM2.5 was above 1.0 μg/m3, being at high pollution level. In addition, K had obvious correlation with organic carbon (OC) and element carbon (EC), with the correlation coefficients of 0.76 and 0.75 (P<0.000 1), respectively, and it showed that OC and EC had the same source as K, namely biomass burning had certain contribution to OC and EC. Enrichment factors analysis revealed that K, Ca, Fe, Ti, Mn and Cr mainly came from earth crust, rock weathering and other natural sources, while anthropogenic pollution sources had great effects on S, Zn, Cl, Pb, Br, Mo, Cd and As which were affected by soil dust and other natural sources slightly, and Cd had the highest enrichment factor and mainly came from metal smelting. In a word, coal combustion, biomass burning, vehicle emissions, metallurgical, chemical industry and dust were the main sources of PM2.5 in autumn in Xi’an. [Conclusion] The study could provide theoretical foundation for the control of urban environmental pollution.

Analysis on thermophoretic deposit of fine particle on water wall of 10 MW high temperature gas-cooled reactor

The water wall is an important part of the passive natural circulation residual heat removal system in a high temperature gas-cooled reactor. The maximum temperatures of the pressure shell and the water wall are calcu- lated using annular vertical closed cavity model. Fine particles can deposit on the water wall due to the thermophore- sis effect. This deposit can affect heat transfer. The thermophoretic deposit efficiency is calculated by using Batch and Shen’s formula fitted for both laminar flow and turbulent flow. The calculated results indicate that natural convection is turbulent in the closed cavity. The transient thermophoretic deposit efficiency rises with the increase of the pressure shell’s temperature. Its maximum value is 14%.

Preparation of La _(0.9)RE_(0.1) MnO_3 Ultra fine Particles Used for CH_4 Oxidation

A technique for preparing perovskite type oxides was developed. By this technique, ultra fine particles of La 0.9 RE 0.1 MnO 3 (RE: Y, Ce, Pr, Sm, Gd,or Dy) with high surface area and single perovskite structure were prepared, and the series of La 0.9 RE 0.1 MnO 3 catalysts were studied experimentally. The so prepared ultra fine particles exhibites high catalytic activity for CH 4 total oxidation. The ultra fine particles of La 0.9 RE 0.1 MnO 3 (except for La 0.9 Pr 0.1 MnO 3) prepared by this method are thermally much more stable than LaMnO 3. Of the La 0.9 RE 0.1 MnO 3 series, La 0.9 Y 0.1 MnO 3 is most thermally stable, and La 0.9 Y 0.1 MnO 3 or La 0.9 Gd 0.1 MnO 3 (varies with calcination temperature) exhibits the highest catalytic activity for total oxidation of methane. The specific surface area of La 0.9 Y 0.1 MnO 3 calcined at 1000 ℃ reaches 14.9 m 2·g -1 , while the specific surface area of LaMnO 3 calcined at the same temperature is only 1.8 m 2·g -1 .