Ostensibly perpetual optical data storage in glass with ultra-high stability and tailored photoluminescence

Long-term optical data storage(ODS)technology is essential to break the bottleneck of high energy consumption for information storage in the current era of big data.Here,ODS with an ultralong lifetime of 2×10^(7)years is attained with single ultrafast laser pulse induced reduction of Eu^(3+)ions and tailoring of optical properties inside the Eu-doped aluminosilicate glasses.We demonstrate that the induced local modifications in the glass can stand against the temperature of up to 970 K and strong ultraviolet light irradiation with the power density of 100 kW/cm^(2).Furthermore,the active ions of Eu^(2+)exhibit strong and broadband emission with the full width at half maximum reaching 190 nm,and the photoluminescence(PL)is flexibly tunable in the whole visible region by regulating the alkaline earth metal ions in the glasses.The developed technology and materials will be of great significance in photonic applications such as long-term ODS.

Simulation of an apodizer's effect for high-density optical storage

The effect of an apodizer with two parallel taper refractive surfaces is theoretically investigated for highdensity optical storage. The apodizer may modulate an incident Gaussian beam into an annular beam. Simulation shows that with the increasing inner radius of the modulated beam, the focal spot shrinks obviously. The depolarization effect gets strong simultaneously, which induces the circular symmetry loss of the focal spot. In this process, pattern density of the orthogonal and longitudinal diffractive fields increases remarkably.

Research Progress on High-Density Optical Storage Materials for Blue-Green Laser Recording

The key for the development of high -density optical storage technology nowadays is to develop short wavelength (blue-green laser) recording media and devices. Based on the progress achieved in the key program of National Natural Science Foundation of China "high-density optical storage materials using blue -green laser recording", the chemical composition, microstructure, storage performance and related mechanisms of some kinds of novel high density optical storage materials are presented in this paper. The research method and clew for super high -density optical storage materials and technologies are highlighted.

Unconventional phase transition of phase-change-memory materials for optical data storage

Recent years, optically controlled phase-change memory draws intensive attention owing to some advanced applications including integrated all-optical nonvolatile memory, in-memory computing, and neuromorphic computing. The light-induced phase transition is the key for this technology. Traditional understanding on the role of light is the heating effect. Generally, the RESET operation of phase-change memory is believed to be a melt-quenching-amorphization process. However, some recent experimental and theoretical investigations have revealed that ultrafast laser can manipulate the structures of phase-change materials by non-thermal effects and induces unconventional phase transitions including solid-to-solid amorphization and order-to-order phase transitions. Compared with the conventional thermal amorphization,these transitions have potential superiors such as faster speed, better endurance, and low power consumption. This article summarizes some recent progress of experimental observations and theoretical analyses on these unconventional phase transitions. The discussions mainly focus on the physical mechanism at atomic scale to provide guidance to control the phase transitions for optical storage. Outlook on some possible applications of the non-thermal phase transition is also presented to develop new types of devices.

Near-perfect fidelity polarization-encoded multilayer optical data storage based on aligned gold nanorods

Encoding information in light polarization is of great importance in facilitating optical data storage(ODS)for information security and data storage capacity escalation.However,despite recent advances in nanophotonic techniques vastly en-hancing the feasibility of applying polarization channels,the data fidelity in reconstructed bits has been constrained by severe crosstalks occurring between varied polarization angles during data recording and reading process,which gravely hindered the utilization of this technique in practice.In this paper,we demonstrate an ultra-low crosstalk polarization-en-coding multilayer ODS technique for high-fidelity data recording and retrieving by utilizing a nanofibre-based nanocom-posite film involving highly aligned gold nanorods(GNRs).With parallelizing the gold nanorods in the recording medium,the information carrier configuration minimizes miswriting and misreading possibilities for information input and output,respectively,compared with its randomly self-assembled counterparts.The enhanced data accuracy has significantly im-proved the bit recall fidelity that is quantified by a correlation coefficient higher than 0.99.It is anticipated that the demon-strated technique can facilitate the development of multiplexing ODS for a greener future.

Photostimulated Luminescence and Optical Storage in Eu ^(2+)-Doped Fluoride-Oxide Glass Ceramics

Photostimulated luminescence (PSL) phenomenon was observed in a fluoride-oxide glass ceramics doped with Eu 2+. When the UV light irradiated glass ceramic was stimulated by a longer wavelength light, PSL at 447 nm due to the 5d-4f transition of Eu 2+ was observed. The PSl excitation band peaking at 543 nm is due to the electron trap centers which are located either in the Eu 2+-doped crystallites or in the glass; where exactly they are located in is not yet known. The optical storage properties of this kind of glass ceramic were also studied. By comparing with the investigations on PSL phosphor Eu 2+ doped alkali halides, PSL mechanism in glass ceramics which is still an open question and has to be investigated in further experiments was explained.

OPTICAL STORAGE MECHANISM AND HIGH-ORDER DIFFRACTION PROPERTIES OF NITROAZOBENZENE-CONTAINING POLYESTER FILMS

Using Nd:YAG second harmonic pulse (100 ps), the optical storage properties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] and poly [2'-chloro-4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] have been studied by multiwave mixing. The high-order diffractions of the orientation gratings induced by anisotropy via the reorientation of nitroazobenzene groups and optical information storage with long-term stability have been realized by multiwave mixing in their films. Up to 3rd order forward diffraction was detected in two wave mixing, while up to 4th order backward diffraction was observed in degenerated four wave mixing. The recording mechanism was explained by the trans-cis-trans isomerization cycles of azobenzene groups. The isomerization of these azobenzene groups probably undergoes with inversion mechanism under the experimental conditions. The information recorded in these films has been kept for more than 6 months.

Complex amplitude distribution for compensation of refractive index mismatch on 3D optical storage recording system

The complex amplitude distribution which can compensate for the spherical aberration caused by mismatch on lnterthce between recording material and immersion material （air） on three-dimensional optical storage system is derived analytically and numerically. Comparison between two approaches is made. It is also shown how the depth of recording layer and position of reference plane are related to the phase distribution at reference plane and how the mismatch can be resolved by using a pure phase element.

Controllable all-optical stochastic logic gates and their delay storages based on the cascaded VCSELs with optical-injection

Using the dynamical properties of the polarization bistability that depends on the detuning of the injected light,we propose a novel approach to implement reliable all-optical stochastic logic gates in the cascaded vertical cavity surface emitting lasers（VCSELs） with optical-injection.Here,two logic inputs are encoded in the detuning of the injected light from a tunable CW laser.The logic outputs are decoded from the two orthogonal polarization lights emitted from the optically injected VCSELs.For the same logic inputs,under electro-optic modulation,we perform various digital signal processing（NOT,AND,NAND,XOR,XNOR,OR,NOR） in the all-optical domain by controlling the logic operation of the applied electric field.Also we explore their delay storages by using the mechanism of the generalized chaotic synchronization.To quantify the reliabilities of these logic gates,we further demonstrate their success probabilities.

Optical Information Storage in Poly [3-Methyl-4-Bis(N,N-Oxyethylene)Imino-4-Nitro-Azobenzene Sebacoyl] Film by Degenerate Four-Wave Mixing

Optical storage caused by photo-induced anisotropy in poly[3-methyl-4-bis(N,N-oxyethylene)imino-4-nitro-azobenzene sebacoyl]film is studied by degenerate four-wave mixing.Molecule orientation gratings which are stable for three months are produced.The grating in the sample can be“erased”by using circular polarized light.So an azobenzene polymer thin film can be used many times to restore optical information.

Magneto-optical Disk Material for Improving the Density of Information Storage

This paper introduces the fundamental principle and features ofmagneto-optical storage technol- ogy, and discuses the trend and aseries of key techniques for increasing the data storage density ofmagneto-opti- cal disk. The three ways including MO media, recordingmethod and readout method for increasing the disk ca- pacity havebeen discussed. Moreover, the importance with the exchange-coupledeffect between the magnetic layers and recording domain morphology isemphasized.

An Electrochromic Nickel Phosphate Film for Large-Area Smart Window with Ultra-Large Optical Modulation

Exploring materials with high electrochemical activity is of keen interest for electrochemistry-controlled optical and energy storage devices.However,it remains a great challenge for transition metal oxides to meet this feature due to their low electron conductivity and insufficient reaction sites.Here,we propose a type of transition metal phosphate(NiHPO_(4)·3H_(2)O,NHP)by a facile and scalable electrodeposition method,which can achieve the capability of efficient ion accommodation and injection/extraction for electrochromic energy storage applications.Specifically,the NHP film with an ultra-high transmittance(approach to 100%)achieves a large optical modulation(90.8%at 500 nm),high coloration efficiency(75.4 cm^(2)C^(-1)at 500 nm),and a high specific capacity of 47.8 mAh g^(-1)at 0.4 A g^(-1).Furthermore,the transformation mechanism of NHP upon electrochemical reaction is systematically elucidated using in situ and ex situ techniques.Ultimately,a large-area electrochromic smart window with 100 cm^(2)is constructed based on the NHP electrode,displaying superior electrochromic energy storage performance in regulating natural light and storing electrical charges.Our findings may open up new strategies for developing advanced electrochromic energy storage materials and smart windows.

Adjusting amplitude of the stored optical solitons by inter-dot tunneling coupling in triple quantum dot molecules

We study the propagation properties of a probe field in an aligned asymmetric triple quantum dot molecule with both sides inter-dot tunneling coupling effect. It is shown that the probe field can form optical soliton due to the destructive quantum interference induced by the quantum inter-dot tunneling coupling effect. Interestingly, these optical solitons can be stored and retrieved by adjusting single or double inter-dot tunneling coupling effect, different from that light memory in the ultra-cold atom system. Furthermore, we also find that the amplitude of the stored optical soliton can be adjusted by the strength of the single or double inter-dot tunneling coupling. It is possible to improve the stability and the fidelity of the optical information in the process of the storage and retrieval in semiconductor quantum dots devices.

Calibration of the linear optics in the SSRF storage ring

PhaseⅠcommissioning of the SSRF storage ring at 3.0 GeV was ended with encouraging results. Distortions and calibrations of the linear optics during the storage ring commissioning are discussed in this paper.The calibration procedure has reduced sextupole-additional focusing effects by minimizing closed orbit deviation and corrected quadrupole magnetic coefficients with the linear optics from closed orbit (LOCO) technique.After fitting the closed orbit response matrix,linear optics of the storage ring is substantially corrected,and the measured parameters agree well with the design.Four optics modes were commissioned,and relevant machine physics studies were carried out.Their results are summarized.

Optical storage of circular airy beam in atomic vapor

The realization of quantum storage of spatial light field is of great significance to the construction of high-dimensional quantum repeater.In this paper,we experimentally realize the storage and retrieval of circular Airy beams(CABs)by using theΛ-type three-level energy system based on the electromagnetically induced transparency in a hot rubidium atomic vapor cell.The weak probe beam field is modulated with phase distribution of CABs by a spatial light modulator.We store the probe circular Airy beam(CAB)into the rubidium atomic vapor cell and retrieve it after the demanded delay.We quantitatively analyze the storage results and give corresponding theoretical explanations.Moreover,we investigate the autofocusing and self-healing effect of the retrieved CAB,which indicates that the properties and beam shape of CAB maintain well after storage.Our work will have potential applications in the storage of high-dimensional quantum information,and is also useful for improving the channel capacities of quantum internet.

Modelling of Energy Storage Photonic Medium by Wavelength-Based Multivariable Second-Order Differential Equation

Wavelength-dependent mathematical modelling of the differential energy change of a photon has been performed inside a proposed hypothetical optical medium.The existence of this medium demands certain mathematical constraints,which have been derived in detail.Using reverse modelling,a medium satisfying the derived conditions is proven to store energy as the photon propagates from the entry to exit point.A single photon with a given intensity is considered in the analysis and hypothesized to possess a definite non-zero probability of maintaining its energy and velocity functions analytic inside the proposed optical medium,despite scattering,absorption,fluorescence,heat generation,and other nonlinear mechanisms.The energy and velocity functions are thus singly and doubly differentiable with respect to wavelength.The solution of the resulting second-order differential equation in two variables proves that energy storage or energy flotation occurs inside a medium with a refractive index satisfying the described mathematical constraints.The minimum-value-normalized refractive index profiles of the modelled optical medium for transformed wavelengths both inside the medium and for vacuum have been derived.Mathematical proofs,design equations,and detailed numerical analyses are presented in the paper.

Decoding the future:opportunities and challenges in next-generation optical data storage[Invited]

The ongoing quest for higher data storage density has led to a plethora of innovations in the field of optical data storage.This review paper provides a comprehensive overview of recent advancements in next-generation optical data storage,offering insights into various technological roadmaps.We pay particular attention to multidimensional and superresolution approaches,each of which uniquely addresses the challenge of dense storage.The multidimensional approach exploits multiple parameters of light,allowing for the storage of multiple bits of information within a single voxel while still adhering to diffraction limitation.Alternatively,superresolution approaches leverage the photoexcitation and photoinhibition properties of materials to create diffraction-unlimited data voxels.We conclude by summarizing the immense opportunities these approaches present,while also outlining the formidable challenges they face in the transition to industrial applications.

TeO_(x) Thin Films for Write-Once Optical Recording Media

TeO_x thin films were prepared by vacuum evaporation of TeO_2 powder. Structural characteristic and surface mor-phology of the as-deposited films was analyzed by using X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray diffractometer and atomic force microscopy. It was found that the films represented a two component system comprising Te particies dispersed in an amorphous TeO2 matrix. The dispersed Te particies were in a crystalline state. The TeOx films showed a finely granular structure and a rough surface. Results of the statie recording test showed that the TeO_x films had good writing sensitivity for short-wavelength laser beam (514.5 nm). Primary results of the dynamic test at 514.5 nm were also reported. The TeO_x films were suitable for using as a blue-green wavelength high density optical storage medium.

MICROSTRUCTURES AND OPTICAL PROPERTIES OF Te_（81）Ge_（15）Sb_4 THIN FILMS USED FOR PHASE CHANGE RECORDING MATERIALS

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＡＮＤＯＰＴＩＣＡＬＰＲＯＰＥＲＴＩＥＳＯＦＴｅ_（８１）Ｇｅ_（１５）Ｓｂ_４ＴＨＩＮＦＩＬＭＳＵＳＥＤＦＯＲＰＨＡＳＥＣＨＡＮＧＥＲＥＣＯＲＤＩＮＧＭＡＴＥＲＩＡＬＳ￥Ｓｏｎｇ，Ｌｉａｎｐｅｎｇ；Ｈｕａｎｇ，Ｓｈｕｗａ?..

Effects of Preparation and Storage of Agar Media on the Sensitivity of Bacterial Forward Scattering Patterns

Recent worldwide foodborne outbreaks emphasize the need for the development of rapid and accurate method for pathogen detection. To address such issues, a new colony based label-free detection method working on the principles of elastic light scattering was introduced. In order to build libraries of scattering images for bacterial pathogens, it is pertinent to determine the effect of preparation and storage of the agar media on the scatter patterns. Scatter patterns of three Escherichia coli serovars (O26, O111 and O157) were studied and used in a model system, after growth on Sorbitol-MacConkey agar plates that were prepared and stored at different conditions in the laboratory. Quantitative image processing software was used to analyze variation in scatter patterns of the same serovar on media prepared under various standard laboratory conditions and to generate a cross-validation matrix for comparison. Based on the results, it was determined that attention should be given during preparation of media so that the agar plates are not air-dried more than 10 - 20 min after solidification at room temperature. The plates could be stored in sealed bags in cold room (4oC - 10oC) for up to a month before use. The findings of this study should provide guidelines in preparation, storage, and handling of media for generation of reproducible scatter patterns of bacterial colonies with the light scattering sensor for pathogen detection.