Broadband high-efficiency dielectric metalenses based on quasi-continuous nanostrips

Benefiting from the abrupt phase changes within subwavelength thicknesses,metasurfaces have been widely applied for lightweight and compact optical systems.Simultaneous broadband and high-efficiency characteristics are highly attractive for the practical implementation of metasurfaces.However,current metasurface devices mostly adopt discrete micro/nano structures,which rarely realize both merits simultaneously.In this paper,dielectric metasurfaces composed of quasi-continuous nanostrips are proposed to overcome this limitation.Via quasi-continuous nanostrips metasurface,a normal focusing metalens and a superoscillatory lens overcoming the diffraction limit are designed and experimentally demonstrated.The quasi-continuous metadevices can operate in a broadband wavelength ranging from 450 nm to 1000nm and keep a high power efficiency.The average efficiency of the fabricated metalens reaches 54.24%,showing a significant improvement compared to the previously reported metalenses with the same thickness.The proposed methodology can be easily extended to design other metadevices with the advantages of broadband and high-efficiency in practical optical systems.

High-efficiency Carbonation Modification Methods of Recycled Coarse Aggregates

To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put forward.The carbonation effect of modified recycled coarse aggregate with three different carbonation methods was evaluated,and water absorption,apparent density and crush index of modified recycled coarse aggregate were measured.Combined with XRD,SEM,and MIP microscopic analysis,the high-efficiency carbonation strengthening mechanism of modified recycled coarse aggregate was revealed.The experimental results show that,compared with the non-carbonated recycled coarse aggregate,the physical and microscopic properties of carbonated recycled coarse aggregate are improved.The method of carbonation with nano-SiO_(2) pre-soaking can realize the high-efficiency carbonation of recycled coarse aggregate,for modified recycled coarse aggregate with the method,water absorption is reduced by 23.03%,porosity is reduced by 44.06%,and the average pore diameter is 21.82 nm.The high-efficiency carbonation strengthening mechanism show that the pre-socked nano-SiO_(2) is bound to the hydration product Ca(OH)_(2) of the old mortar with nano-scale C-S-H,which can improve the CO_(2) absorption rate,accelerate the carbonation reaction,generate more stable CaCO_(3) and nano-scale silica gel,and bond to the dense three-dimensional network structure to realize the bidirectional enhancement of nano-materials and pressurized carbonation.It is concluded that the method of carbonation with nano-SiO_(2) pre-soaking is a novel high-efficiency carbonation modification of recycled coarse aggregate.

Toward high-efficiency perovskite solar cells with one-dimensional oriented nanostructured electron transport materials

The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.

Selection of Greenhouse Zucchini Varieties and High-Quality,High-Yield and High-Efficiency Cultivation Techniques

[Objectives]To select zucchini varieties suitable for cultivation in Zibo City and test its high-yield cultivation techniques.[Methods]Six zucchini varieties were introduced,and their commercial quality and yield were determined.[Results]The yield of Shengfeier,Xiuyu 170 and Xihulu 309 increased by 11.4%,6.9%and 4.6%,respectively compared with S68(control),and zucchini was straight,looked pleasing to the eye,and had strong disease resistance.[Conclusions]The zucchini varieties were selected and the high-quality,high-yield and high-efficiency cultivation techniques were integrated.

Adiabatic cooling for cold polar molecules on a chip using a controllable high-efficiency electrostatic surface trap

We propose a controllable high-efficiency electrostatic surface trap for cold polar molecules on a chip by using two insulator-embedded charged rings and a grounded conductor plate. We calculate Stark energy structure pattern of ND3 molecules in an external electric field using the method of matrix diagonalization. We analyze how the voltages that are applied to the ring electrodes affect the depth of the efficient well and the controllability of the distance between the trap center and the surface of the chip. To obtain a better understanding, we simulate the dynamical loading and trapping processes of ND3 molecules in a ｜J, KM = ｜1,-1 state by using classical Monte–Carlo method. Our study shows that the loading efficiency of our trap can reach ～ 88%. Finally, we study the adiabatic cooling of cold molecules in our surface trap by linearly lowering the potential-well depth（i.e., lowering the trapping voltage）, and find that the temperature of the trapped ND3 molecules can be adiabatically cooled from 34.5 m K to ～ 5.8 m K when the trapping voltage is reduced from-35 k V to-3 k V.

INVESTIGATION OF SURFACE TEMPERATURE IN HIGH-EFFICIENCY DEEP GRINDING

A new thermal model with triangular heat flux distribution is given in high-efficiency deep grinding. The mathematical expressions are driven to calculate the surface temperature. The transient behavior of the maximum temperature on contact area is investigated in different grinding conditions with a J-type thermocouple. The maximum contact temperatures measured in different conditions are found to be between 1 000 ℃ and 1 500 ℃ in burn-out conditions. The experiment results show good agreement with the new thermal model.

Exergy Analysis and Thermal Optimization of a Double-Turbine Regeneration System in a Ultra-Supercritical Double-Reheat Unit

Improving the primary steam parameters is one of the most direct ways to improve the cycle efficiency of a powergeneration system. In the present study, the typical problem connected to the excessively high superheat degree ofextraction steam in an ultra-supercritical (USC) double-reheat unit is considered. Using a 1000 MW power plantas an example, two systems (case 1 and case 2) are proposed, both working in combination with a regenerativesteam turbine. The thermal performances of these two systems are compared with that of the original systemthrough a heat balance method and an exergy balance strategy. The results reveal that the two coupled systemscan significantly reduce the superheat degree of extraction steam, turbine heat rate, and coal consumption of theunit and improve the energy utilization efficiency. These results will provide useful theoretical guidance to futureinvestigators wishing to address the general problem relating to energy conservation and modelling of the coupledextraction steam regenerative system of USC double-reheat units.

High-Efficiency Mid-Infrared Picosecond MgO:PPLN Single Resonant Optical Parametric Oscillator

We demonstrate a high-emciency mid-infrared picosecond optical parametric oscillator （OPO） based on MgO doped periodically poled lithium niobate （MgO：PPLN） with a laser diode array （LDA） pumped Innoslab amplifier as the pumping source. Under a 16 W synchronously pumping power, 4.5 W of idler light at 2896nm is obtained. A tuning range of idler light from 2688nm to 3016nm is achieved, within which the highest optical-optical conversion ettlciency from pump power to OPO output is 35.1%. Moreover, a signal light of -500mW from 1644 to 1700nm with a repetition rate of 233.8 MHz is generated.

Development Features of Supercritical (Ultra-Supercritical) Technology in the World and Experiences We Can Learn

The development and technical characteristics in different stages of supercritical (ultra-Supercritical) technology abroad are introduced in this paper. At the same time, according to the development trend of supercritical (ultra-supercritical) technology, the corresponding revelations are given in this paper. That is: It is an inevitable choice to develop supercritical (ultra-supercritical) technology if we want to improve the thermal efficiency and heat efficiency.

Developing high-efficiency base editors by combining optimized synergistic core components with new types of nuclear localization signal peptide

The clustered regularly interspaced short palindromic repeats(CRISPR)–CRISPR-associated protein(Cas) system has been widely used for genome editing. In this system, the cytosine base editor(CBE) and adenine base editor(ABE) allow generating precise and irreversible base mutations in a programmable manner and have been used in many different types of cells and organisms. However, their applications are limited by low editing efficiency at certain genomic target sites or at specific target cytosine(C) or adenine(A) residues. Using a strategy of combining optimized synergistic core components, we developed a new multiplex super-assembled ABE(sABE) in rice that showed higher base-editing efficiency than previously developed ABEs. We also designed a new type of nuclear localization signal(NLS) comprising a FLAG epitope tag with four copies of a codon-optimized NLS(F4NLS^(r2)) to generate another ABE named F4NLS-sABE. This new NLS increased editing efficiency or edited additional A at several target sites. A new multiplex super-assembled CBE(sCBE) and F4NLS^(r2) involved F4NLS-sCBE were also created using the same strategy. F4NLS-sCBE was proven to be much more efficient than sCBE in rice. These optimized base editors will serve as powerful genome-editing tools for basic research or molecular breeding in rice and will provide a reference for the development of superior editing tools for other plants or animals.

Approaches for High-Efficiency III-V/Si Tandem Solar Cells

The Si tandem solar cells are very attractive for realizing high efficiency and low cost. This paper overviews current status of III-V/Si tandem solar cells including our results. The analytical results for efficiency potential of Si tandem solar cells and loss analysis of Si bottom cells as well as bandgap energy optimization of sub-cells are presented. The 2-junction and 3-junction Si tandem solar cells have potential efficiencies of 36% and 42%, respectively. ERE (external radiative efficiency) analysis for Si solar cells is analyzed in order to clarify properties of Si bottom solar cells. Properties of single-crystalline Si heterojunction solar cell fabricated in this study were analyzed. The current status of efficiencies of our Si bottom cell, upper III-V 2-junction solar cell and III-V/Si 3-junction tandem solar cell was shown to be 5.2% and 28.6% and 33.8%. Achievement of Jsc of 12 mA/cm2 for Si bottom cell is necessary to realize high-efficiency 3-junction Si tandem solar cells with an efficiency of more than 37%. In addition, this paper presents ERE analysis of III-V 2-junction upper solar cells for improving III-V/Si 3-junction tandem solar cells. Several ways to improve efficiency of III-V/Si 3-junction tandem solar cells by reducing non-radiative recombination, optical and resistance losses are shown.

Loss Analysis of High-Efficiency Perovskite/Si Tandem Solar Cells for Large Market Applications

The Si tandem solar cells composes of III-V, II-VI, chalcogenide and perovskite top cells and Si bottom cells are very attractive for creation of new markets. The perovskite/Si tandem solar cells are thought to be one of the most promising PV devices because of high-efficiency and low-cost potential. However, efficiencies of perovskite/Si tandem solar cells with an efficiency of 29.8% are lower compared to 39.5% with III-V 3-junction tandem solar cells and 35.9% with III-V/Si 3-junction tandem solar cells. Therefore, it is necessary to clarify and reduce several losses of perovskite/Si tandem solar cells. This paper presents high efficiency potential of perovskite/Si tandem solar cells analyzed by using our analytical procedure and discusses about non-radiative recombination, optical and resistance losses in those tandem solar cells. The perovskite/Si 2-junction tandem solar cells is shown to have efficiency potential of 37.4% as a result of non-radiative recombination loss of 2.3%, optical loss of 2.7% and resistance loss of 3.1%. Although the perovskite/Si 3-junction tandem solar cells are thought to be very attractive because of higher efficiency with an efficiency of more than 42%, decreasing non-radiative recombination loss in wide bandgap perovskite solar cell materials is pointed out to be necessary.

A High-Efficiency Broadband Superconducting Nanowire Single-Photon Detector with a Composite Optical Structure

Superconducting nanowire single-photon detectors （SNSPDs） with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance both the system detection efficiency and the response bandwidth. Numerical simulation by the finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures at multiple frequency bands. The absorption capacity of the superconducting nanowires reaches 70%, 72%, 60.73%, 61.7%, 41.2%, and 46.5% at wavelengths of 684, 850, 732, 924, 1256, and 1426nm, respectively. The use of a composite optical structure reduces the total filling factor of superconducting nanowires to only 0.25, decreases the kinetic inductance of SNSPDs, and improves the count rates.

Role of PV-Powered Vehicles in Low-Carbon Society and Some Approaches of High-Efficiency Solar Cell Modules for Cars

Development of highly-efficient photovoltaic (PV) modules and expanding its application fields are significant for the further development of PV technologies and realization of innovative green energy infrastructure based on PV. Especially, development of solar-powered vehicles as a new application is highly desired and very important for this end. This paper presents the impact of PV cell/module conversion efficiency on reduction in CO2 emission and increase in driving range of the electric based vehicles. Our studies show that the utilization of a highly-efficient (higher than 30%) PV module enables the solar-powered vehicle to drive 30 km/day without charging in the case of light weight cars with electric mileage of 17 km/kWh under solar irradiation of 3.7 kWh/m2/day, which means that the majority of the family cars in Japan can run only by the sunlight without supplying fossil fuels. Thus, it is essential to develop high-efficiency as well as low-cost solar cells and modules for automotive applications. The analytical results developed by the authors for conversion efficiency potential of various solar cells for choosing candidates of the PV modules for automotive applications are shown. Then we overview the conversion efficiency potential and recent progress of various Si tandem solar cells, such as III-V/Si, II-VI/Si, chalcopyrite/Si, and perovskite/Si tandem solar cells. The III-V/Si tandem solar cells are expected to have a high potential for various applications because of its high conversion efficiency of larger than 36% for dual-junction and 42% for triple-junction solar cells under 1-sun AM1.5 G illumination, lightweight and low-cost potentials. The analysis shows that III-V based multi-junction and Si based tandem solar cells are considered to be promising candidates for the automotive application. Finally, we report recent results for our 28.2% efficiency and Sharp’s 33% mechanically stacked InGaP/GaAs/Si triple-junction solar cell. In addition, new approaches which are suitable for automotive applications by using III-V triple-junction, and static low concentrator PV modules are also presented.

High-Efficiency Quantum Routing in a Multi-Cross-Shaped Waveguide

Efficiently routing the quantum signals between different channels is essential in a quantum multichannel network.We investigate the quantum routing in a multi-cross-shaped waveguide coupled to driven three-level systems.Numerical results show that the high routing capacity transferring from the input channel to the other channels can be explicitly enhanced by effective reflection potentials. The proposed system may be utilized as a scalable quantum device to control single-photon routing.

Study on Calculation Method for Partition of Heat Transfer in an Ultra-supercritical Boiler

Use a 1000MW ultra-supercritical tower boiler as the research object. On the basis of one dimensional model, simplify the tube heat transfer model and the radiation heat transfer model;establish the two-dimensional area calculation model with the regional method;?summarize the heat load distribution of flue gas temperature and water wall surface;and compare with the measured data. The error range of the result is acceptable on the project. The distribution of water wall surface heat load along the furnace width and the area where heat transfer deterioration?cause easily along the furnace height direction are studied with the model and algorithm on different boiler load conditions. All these provide the reference for the design and operation of the ultra supercritical boiler.

HIGH-EFFICIENCY CODING FOR PAL COLOR TELEVISION SIGNAL

Proceeding from the specific characteristics of PAL television signals adopted in China this paper points out that if the fs = 2fsc of sub-Nyquist sampling and DPCM encoding is used for PAL complete signal and if the blanking time is utilized to transmit code of effective area, it is possible to transmit a color TV signal over PCM three-group channel.

High-Efficiency Bottom-Emitting Organic Light-Emitting Diodes with Double Aluminum as Electrodes

Bottom-emitting organic light-emitting diodes （BOLEDs）, using AI/MoO3 as the semitransparent anode and LiF/Al as the reflective cathode and Alqa as the emitter, are fabricated. At the same time, the performance improvement of the BOLEDs having a capping layer inserted between the semitransparent anode and the glass substrate is studied. The optimized microcavity BOLED shows a current efficiency （5.49cd/A） enhancement of 10% compared with a conventional BOLED based on ITO （5.0cd/A）. Slight color variation is observed in 120° forward viewing angle with 5Onto BCP as the capping layer. Strong dependence of efficiency on A1 anode thickness and the thickness and refractor index of the capping layer is explained. The results indicate that the BOLEDs with the double-aluminum electrode have potential practical applications.

High-Efficiency Green Phosphorescent Organic Light-Emitting Diode Based on Simplified Device Structures

A high-efficiency green phosphorescent organic light emitting diode with a simplified structure is achieved that is free of a hole transport layer. The design of this kind of device structure not only saves the consumption of organic materials but also greatly reduces the structural heterogeneities and effectively facilitates the charge injection into the emissive layer. The resulting green phosphorescent organic light-emitting diodes （PHOLEDs） exhibit higher electroluminescent efficiency. The maximum external quantum efficiency and current efficiency reach 23.7% and 88 cd/A, respectively. Moreover the device demonstrates satisfactory stability, keeping 23.7% and 88cd/A, 22% and 82cd/A, respectively, at a luminance of 100 and 1000cd/m2. The working mechanism for achieving high efficiency based on such a simple device structure is discussed correspondingly. The improved charge carrier injection and transport balance are proved to prominently contribute to achieve the high efficiency and great stability at high luminance in the green PHOLEDs.

Model Identification Based on Subspace Model Identification of Main Steam Temperature in Ultra-Supercritical Coal-Fired Power Unit

Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature system of USC unit.Closed-loop SMI is applied to building step response model of the unit directly.The parameters selection method is proposed to deal with the parameter sensitivity and improve the reliability of the model.Finally,the model is used in model identification of real USC unit.