The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research （FAIR） is an international cooperation project. The collaborative simulation and testing of the deve...The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research （FAIR） is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional （3D） electromagnetic （EM） model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278 A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite （G10） spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta173 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.展开更多
对FAIR(Facility for Antiproton and Ion Research)收集环-CR(Collector Ring)二极超导磁体外杜瓦的超压泄放系统进行了概念设计,给出了爆破片式的泄放系统结构,并基于ANSYS的结构分析初步确定了爆破片的结构参数;以及通过ANSYS对波纹...对FAIR(Facility for Antiproton and Ion Research)收集环-CR(Collector Ring)二极超导磁体外杜瓦的超压泄放系统进行了概念设计,给出了爆破片式的泄放系统结构,并基于ANSYS的结构分析初步确定了爆破片的结构参数;以及通过ANSYS对波纹管和外杜瓦进行了结构分析,分析结果表明波纹管和外杜瓦在超压状态下安全。文中的设计和分析研究,为外杜瓦的工程设计提供了有益的参考。展开更多
基金supported by ASIPP under contract MOU-GSI-ACC-2005-01the Special Fund of Talent Development of Anhui Province(No.2009Z056)+1 种基金the Research Fund for the Doctoral Program of Anhui University of Architecture(No.K02425)the Fund of Anhui Educational Committee(No.KJ2010B036)
文摘The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research （FAIR） is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional （3D） electromagnetic （EM） model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278 A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite （G10） spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta173 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.
文摘对FAIR(Facility for Antiproton and Ion Research)收集环-CR(Collector Ring)二极超导磁体外杜瓦的超压泄放系统进行了概念设计,给出了爆破片式的泄放系统结构,并基于ANSYS的结构分析初步确定了爆破片的结构参数;以及通过ANSYS对波纹管和外杜瓦进行了结构分析,分析结果表明波纹管和外杜瓦在超压状态下安全。文中的设计和分析研究,为外杜瓦的工程设计提供了有益的参考。
