Kinematic deformation and intensity assessment of the 2021 Maduo M_(S)7.4 earthquake in Qinghai revealed by high-frequency GNSS

Rapid acquisition of the kinematic deformation field and seismic intensity distribution of large earthquakes is crucial for postseismic emergency rescue,disaster assessment,and future seismic risk research.The advancement of GNSS observation and data processing makes it play an important role in this field,especially the high-frequency GNSS.We used the differential positioning method to calculate the 1 HZ GNSS data from 98 sites within 1000 km of the M_(S)7.4 Maduo earthquake epicenter.The kinematic deformation field and the distribution of the seismic intensity by using the peak ground velocity derived from displacement waveforms were obtained.The results show that:1)Horizontal coseismic response deformation levels ranging from 25 mm to 301 mm can be observed within a 1000 km radius from the epicenter.Coseismic response deformation on the east and west sides shows bilateral asymmetry,which markedly differs from the symmetry presented by surface rupture.2)The seismic intensity obtained through high-frequency GNSS and field investigations exhibits good consistency of the scope and orientation in the high seismic intensity area,although the former is generally slightly smaller than the latter.3)There may exist obstacles on the eastern side of the seismogenic fault.The Maduo earthquake induced a certain tectonic stress loading effect on the western Kunlun Pass-Jiangcuo fault(KPJF)and Maqin-Maqu segment,resulting in higher seismic risk in the future.

Dynamic Response of Foundations during Startup of High-Frequency Tunnel Equipment

The specialized equipment utilized in long-line tunnel engineering is evolving towards large-scale,multifunctional,and complex orientations.The vibration caused by the high-frequency units during regular operation is supported by the foundation of the units,and the magnitude of vibration and the operating frequency fluctuate in different engineering contexts,leading to variations in the dynamic response of the foundation.The high-frequency units yield significantly diverse outcomes under different startup conditions and times,resulting in failure to meet operational requirements,influencing the normal function of the tunnel,and causing harm to the foundation structure,personnel,and property in severe cases.This article formulates a finite element numerical computation model for solid elements using three-dimensional elastic body theory and integrates field measurements to substantiate and ascertain the crucial parameter configurations of the finite element model.By proposing a comprehensive startup timing function for high-frequency dynamic machines under different startup conditions,simulating the frequency andmagnitude variations during the startup process,and suggesting functions for changes in frequency and magnitude,a simulated startup schedule function for high-frequency machines is created through coupling.Taking into account the selection of the transient dynamic analysis step length,the dynamic response results for the lower dynamic foundation during its fundamental frequency crossing process are obtained.The validation checks if the structural magnitude surpasses the safety threshold during the critical phase of unit startup traversing the structural resonance region.The design recommendations for high-frequency units’dynamic foundations are provided,taking into account the startup process of the machine and ensuring the safe operation of the tunnel.

Review of the Analysis and Suppression for High-frequency Oscillations of the Grid-connected Wind Power Generation System

High-frequency oscillation(HFO)of gridconnected wind power generation systems(WPGS)is one of the most critical issues in recent years that threaten the safe access of WPGS to the grid.Ensuring the WPGS can damp HFO is becoming more and more vital for the development of wind power.The HFO phenomenon of wind turbines under different scenarios usually has different mechanisms.Hence,engineers need to acquire the working mechanisms of the different HFO damping technologies and select the appropriate one to ensure the effective implementation of oscillation damping in practical engineering.This paper introduces the general assumptions of WPGS when analyzing HFO,systematically summarizes the reasons for the occurrence of HFO in different scenarios,deeply analyses the key points and difficulties of HFO damping under different scenarios,and then compares the technical performances of various types of HFO suppression methods to provide adequate references for engineers in the application of technology.Finally,this paper discusses possible future research difficulties in the problem of HFO,as well as the possible future trends in the demand for HFO damping.

Efficient activation of the Co/SBA-15catalyst by high-frequency AC-DBD plasma thermal effects for toluene removal

Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated during the discharge process leads to energy waste and low energy utilization efficiency.In this work,an innovative DBD thermally-conducted catalysis(DBD-TCC)system,integrating high-frequency AC-DBD plasma and its generated thermal effects to activate the Co/SBA-15 catalyst,was employed for toluene removal.Specifically,Co/SBA-15 catalysts are closely positioned to the ground electrode of the plasma zone and can be heated and activated by the thermal effect when the voltage exceeds 10 k V.At12.4 k V,the temperature in the catalyst zone reached 261℃ in the DBD-TCC system,resulting in an increase in toluene degradation efficiency of 17%,CO_(2)selectivity of 21.2%,and energy efficiency of 27%,respectively,compared to the DBD system alone.In contrast,the DBD thermally-unconducted catalysis(DBD-TUC)system fails to enhance toluene degradation due to insufficient heat absorption and catalytic activation,highlighting the crucial role of AC-DBD generated heat in the activation of the catalyst.Furthermore,the degradation pathway and mechanism of toluene in the DBD-TCC system were hypothesized.This work is expected to provide an energy-efficient approach for high-frequency AC-DBD plasma removal of VOCs.

Effects of unilateral superimposed high-frequency jet ventilation on porcine hemodynamics and gas exchange during one-lung flooding

BACKGROUND Superimposed high-frequency jet ventilation(SHFJV)is suitable for respiratory motion reduction and essential for effective lung tumor ablation.Fluid filling of the target lung wing one-lung flooding(OLF)is necessary for therapeutic ultrasound applications.However,whether unilateral SHFJV allows adequate hemodynamics and gas exchange is unclear.AIM To compared SHFJV with pressure-controlled ventilation(PCV)during OLF by assessing hemodynamics and gas exchange in different animal positions.METHODS SHFJV or PCV was used alternatingly to ventilate the non-flooded lungs of the 12 anesthetized pigs during OLF.The animal positions were changed from left lateral position to supine position(SP)to right lateral position(RLP)every 30 min.In each position,ventilation was maintained for 15 min in both modalities.Hemodynamic variables and arterial blood gas levels were repeatedly measured.RESULTS Unilateral SHFJV led to lower carbon dioxide removal than PCV without abnormally elevated carbon dioxide levels.SHFJV slightly decreased oxygenation in SP and RLP compared with PCV;the lowest values of PaO_(2) and PaO_(2)/FiO_(2) ratio were found in SP[13.0;interquartile range(IQR):12.6-5.6 and 32.5(IQR:31.5-38.9)kPa].Conversely,during SHFJV,the shunt fraction was higher in all animal positions(highest in the RLP:0.30).CONCLUSION In porcine model,unilateral SHFJV may provide adequate ventilation in different animal positions during OLF.Lower oxygenation and CO_(2) removal rates compared to PCV did not lead to hypoxia or hypercapnia.SHFJV can be safely used for lung tumor ablation to minimize ventilation-induced lung motion.

Therapeutic efficacy of methylprednisolone sodium succinate via diverse administration routes for mid-to high-frequency sudden sensorineural hearing loss

BACKGROUND Sudden sensorineural hearing loss(SSNHL),characterized by a rapid and unexplained loss of hearing,particularly at moderate to high frequencies,presents a significant clinical challenge.The therapeutic use of methylprednisolone sodium succinate(MPSS)via different administration routes,in combination with conventional medications,remains a topic of interest.AIM To compare the therapeutic efficacy of MPSS administered via different routes in combination with conventional drugs for the treatment of mid-to high-frequency SSNHL.METHODS The medical records of 109 patients with mid-to high-frequency SSNHL were analyzed.The patients were divided into three groups based on the route of administration:Group A[intratympanic(IT)injection of MPSS combined with mecobalamin and Ginkgo biloba leaf extract injection],Group B(intravenous injection of MPSS combined with mecobalamin and Ginkgo biloba leaf extract injection),and Group C(single IT injection of MPSS).The intervention effects were compared and analyzed.RESULTS The posttreatment auditory thresholds in Group A(21.23±3.34)were significantly lower than those in Groups B(28.52±3.36)and C(30.23±4.21;P<0.05).Group A also exhibited a significantly greater speech recognition rate(92.23±5.34)than Groups B and C.The disappearance time of tinnitus,time to hearing recovery,and disappearance time of vertigo in Group A were significantly shorter than those in Groups B and C(P<0.05).The total effective rate in Group A(97.56%)was significantly greater than that in Groups B and C(77.14%and 78.79%,χ^(2)=7.898,P=0.019).Moreover,the incidence of adverse reactions in Groups A and C was significantly lower than that in Group B(4.88%,3.03%vs 2.57%,χ^(2)=11.443,P=0.003),and the recurrence rate in Group A was significantly lower than that in Groups B and C(2.44%vs 20.00%vs 21.21%,χ^(2)=7.120,P=0.028).CONCLUSION IT injection of MPSS combined with conventional treatment demonstrates superior efficacy and safety compared to systemic administration via intravenous infusion and a single IT injection of MPSS.This approach effectively improves patients'hearing and reduces the risk of disease recurrence.

考虑PWM波形特征的纳米晶磁心损耗模型的研究及验证

磁心损耗精确预测对于电力电子变压器的优化设计至关重要。然而,传统的磁心损耗模型在复杂激励下适用性较差,尤其对于占空比可调、高次谐波含量丰富的PWM波磁心损耗预测,计算精度显著下降。基于Jordan损耗分离模型,建立了一种考虑PWM波形特征的磁心损耗计算方法。首先,该方法根据激励波形特征,推导出相应的波形系数及等效频率来计算PWM波激励下的动态涡流损耗,将Jordan模型的适用范围从正弦拓展到PWM波激励下的磁心损耗计算;然后,分析了不同占空比激励下激励波形有效频率及高次谐波含量变化对损耗系数的影响,并对其进行数学表征,实现了整个占空比范围内磁心损耗的精确预测;最后,搭建了高频非正弦激励下软磁材料磁特性测量平台,针对1K107B纳米晶材料,测量了两种典型PWM波激励下的损耗数据。实验结果表明,所建立的磁心损耗模型具有较高的计算精度,相比于传统的Steinmetz改进公式,整体精度提高了25%。

一种低延时低功耗PWM比较器电路设计

设计了一种基于HHGrace 0.35μm BCD工艺的低延时低功耗电压型静态脉冲宽度调制(Pulse Width Modulation,PWM)比较器,主要应用于高频低功耗的开关电源系统。设计中包含动态尾电流源和改进型正反馈放大器,以改进传统跨导放大器(Operational Transconductance Amplifier,OTA)型比较器高延迟和高功耗等问题。仿真结果表明:在1.2~5.0 V供电电压范围内稳定工作,最大上升沿延时35 ns,最大下降沿延时41 ns,支持6 MHz开关频率的系统,比较精度8 mV,失调电压439μV,静态功耗仅为2.5μA(1.2 V供电)和4.4μA(5.0 V供电)。

不平衡电网下电流源型PWM整流器改进型无差拍控制

三相电流源型PWM整流器运行在电网电压不平衡情况下,引起直流侧及网侧电流存在大量低次谐波,势必对后级变换器供电稳定性、安全性等存在不利影响。针对该问题,首先建立整流器数学模型,推导出不平衡电网下直流侧电压和网侧电流表达式,揭示出系统直流侧和网侧电流产生低次谐波的机理。其次,根据瞬时功率理论设计内环电流参考指令,并利用无差拍控制实现网侧电流对参考电流的跟踪。然而传统无差拍控制存在延时问题,将影响网侧电流的跟随性能,造成电能质量下降。为解决该问题,提出了网侧电流内环改进型无差拍控制,利用两步预测法补偿系统延时。最后,基于Matlab/Simulink平台搭建仿真模型,验证所提控制策略的正确性与有效性。结果表明,所提方法能有效抑制直流侧和网侧电流低次谐波,实现网侧电流正弦化和直流侧电压稳定输出。

基于PWM软开关技术的智能充电机的设计与实现

针对由工频变压器和整流电路组成的传统充电机存在体积大、不便运输、可靠性差等缺陷,采用无工频变压器开关电源技术,按照蓄电池充电特性曲线特点,采用恒流-恒压(CC-CV)充电法,进行系统方案及主电路设计,并使用整流—Buck降压斩波模式和PWM软开关技术控制充电机电路。实验表明,与工频型充电机相比,该方法能显著延长蓄电池使用寿命。

双闭环控制的三相电压型PWM整流器的研究

针对传统的不控整流电路中网侧电流谐波很大、晶闸管相控整流电路中深控时网侧功率因数低和闭环控制时动态响应慢等问题,设计出一种引入脉冲宽度调制技术的三相电压型整流器。在完成三相电压型整流器的电压外环电流内环的双闭环控制系统设计的基础上,对其进行了仿真实验。仿真结果表明,与不控或相控整流电路相比,该三相电压型PWM整流电路中,不仅输入电流的谐波大大减小,电能可双向流动,能够实现整流和逆变状态下的单位功率因数运行,还可较好地抑制负载突变时直流侧电压的波动,从而显著提高系统的抗扰能力,真正实现绿色环保和高效节能的高度结合。

模式切换结合模糊PWM的气动容腔压力控制方法

容腔压力是管路系统的主要控制对象,用高速开关阀代替普遍使用的比例阀进行压力调控,可大幅降低系统成本。针对单腔双阀压力跟踪系统,提出了一种模式切换结合模糊PWM的气动容腔压力控制方法。该方法的目的是减小超调,降低调节时间,提高压力跟踪性能。首先由模糊控制器根据偏差给出占空比指令,然后通过引入PWM将开关量转换为连续量调节,进而通过快速切换开关阀的工作模式实现容腔内压力的精细化调节。仿真结果表明:阶跃响应的超调量小于0.6%,峰值时间0.15 s,调节时间0.16 s,同时能够很好的跟踪上0.5 Hz的谐波信号,与当前控制策略相比,超调量和调节时间均有明显的降低。

Radio-frequency measurements of energetic-electron-driven emissions using high-frequency magnetic probe on XuanLong-50 spherical torus

A high-frequency magnetic probe is designed and developed on the XuanL ong-50(EXL-50)spherical torus to measure high-frequency magnetic field fluctuation.The magnetic loop,radio filters,radio-frequency limiter,and data acquisition system of the probe are comprehensively examined.The fluctuation data from the EXL-50 plasma are analyzed in the time–frequency domain using fast Fourier transforms.Moreover,distinct high-frequency instabilities are detected using this diagnostic system.In particular,significant frequency chirping is observed,which is consistent with the bumpon-tail drive instability predicted using the Berk–Breizman model.

基于逆全极点滤波器的高频PWM噪声整形方法

高频开关功率放大器具有高功率、低纹波、高响应的优点,是高加速、高精度定位系统的核心部件。为了解决高频PWM中开关频率与占空比分辨率的矛盾,该文分析调制中噪声整形的基本原理,采用误差反馈结构提取PWM量化噪声进行数字整形,阐述噪声整形滤波器设计约束条件。提出通过逆全极点无限脉冲响应(IIR)滤波器获得有限脉冲响应(FIR)噪声整形滤波器的简明设计方法,仿真及实验表明,该文提出的方法可利用低阶FIR整形滤波器获得平坦的通带和高整形衰减。在不足9位的PWM中,4阶的FIR噪声整形滤波器能够恢复调制信号在10 kHz频段内约40 dB的信噪比损失。

双重化PWM整流器自抗扰模型预测直接功率控制

针对车载双重化脉宽调制(pulse width modulation,PWM)整流器控制性能易受到模型不确定性和列车运行条件(输入电压、功率等级、电路参数等)变化影响的问题,提出一种基于自抗扰控制(active disturbance rejection control,ADRC)和模型预测直接功率控制(model predictive direct power control,MPDPC)的双闭环控制算法。其中,外环基于自抗扰控制理论,构建了基于误差驱动的ADRC(error-based ADRC,EADRC)控制器调节直流侧电压;内环结合基于内模原理的功率补偿方案使用两步MPDPC算法实现电流信号的控制。仿真和实验将所提自抗扰模型预测直接功率控制(ADRC-MPDPC)算法与传统基于比例积分的直接功率控制(proportional integral-based direct power control,PI-DPC)算法和PI-MPDPC方法进行对比,结果表明所提策略在系统启动、负载变化及工况切换等场景表现出更优的动态特性和鲁棒性能。

一种基于离散时域模型的单相PWM整流器控制参数多目标优化设计方法

单相PWM整流器一般采用电压外环比例积分、电流内环比例谐振的双闭环控制方法,在实现交流侧高功率因数的同时稳定直流侧输出电压,因此受到国内外学者的广泛研究。然而,在内外环控制参数设计阶段,传统设计方法一般根据经验选取控制参数,参数选取范围较大,且无法量化评估控制参数的时域控制效果,导致参数优化整定困难。为此,该文提出一种基于离散时域模型的内外环控制参数多目标优化设计方法。首先,采用传统设计方法确定电压外环比例、积分控制参数以及电流内环比例、谐振控制参数的安全设计空间;然后,基于离散时域模型将安全设计空间正映射至控制参数的时域性能空间,实现电流内环控制参数对交流侧功率因数以及电压外环控制参数对直流侧电压超调量的量化评估。在此基础上,通过进一步约束性能目标得到性能优化设计空间,考虑内外环控制参数的耦合效应,对内外环性能优化设计空间进行重新组合,再将其映射至性能空间,得到内外环控制目标帕累托最优前沿下的最优设计空间,从中选取内外环控制参数的优化设计点,在典型工况下实验测得的交流侧功率因数为0.981 26,直流输出电压超调量绝对值为1.37%,证明了所提优化设计方法的正确性。

三相PWM整流器离散空间矢量无模型预测电流控制策略

针对PWM整流器模型预测控制对系数参数准确性高度依赖的问题,提出一种基于离散空间矢量的无模型预测电流控制(MFPCC)策略。该策略通过矢量合成,在每个控制周期应用两个基本矢量,提高了预测电流的准确性;通过峰谷采样,分别测量并存储上一控制周期两个基本矢量作用下的电流梯度;并建立电流梯度方程,从而根据应用矢量的电流梯度进一步更新剩余6个未应用矢量的电流梯度,结合当前时刻的电流采样值,实现未来时刻的电流预测,得到下一时刻最优的虚拟矢量。该方法不依赖于任何系统参数,且消除了传统MFPCC策略中电流梯度更新停滞现象,降低了输出电流谐波。最后,通过实验和仿真验证了所提方法的有效性和优越性。

PWM频率对超精密机床主轴动态性能影响研究

为了分析多轴联动超精密机床伺服驱动器的PWM频率对超精密机床动态性能的影响,研究基于一款国产超精密机床的气体静压主轴,对其控制系统进行Simulink建模、仿真,并开展位置控制实验。通过主轴电机的动态特性方程对PWM型驱动器控制下的超精密机床主轴动态响应进行建模,模拟不同PWM频率下的主轴电机的电流、转矩和转速的响应波形,分析仿真数据,得到被控对象和PWM频率之间的控制律。在此基础上,以主轴的重复定位精度作为动态性能参数,搭建超精密机床主轴动态性能测试平台,通过对重复定位精度实验数据与仿真结果进行线性相关度分析,定量评价其相关度。最终得到气体静压主轴在PWM频率为20~60 kHz的范围内动态性能显著增强,而在60~100 kHz频率范围内的增强的趋势变缓,主轴动态性能的最优PWM频率参数为60 kHz。在设计选型阶段为超精密机床控制系统的参数选择提供了参考。

基于改进PWM的低开关频率SPMSM电流纹波抑制

传统SVPWM由于其电压利用率高等优点被广泛应用在电机控制中,然而随着开关频率的降低,输出电流纹波会加剧,其将面临系统损耗增加、输出转矩脉动等问题,对系统稳定性和动态性能带来不利影响。针对这一问题,本文提出了一种基于改进混合PWM的电流纹波抑制策略。通过构建静止坐标系下的电流纹波矢量模型,分析了低开关频率下的纹波加剧的原因。通过分析电压矢量作用时间和顺序与电流纹波之间的关系,选取了两种能够抑制电流纹波的开关序列。通过在线计算不同序列的电流纹波并根据结果切换输出,实现了对低开关频率下电流纹波的有效抑制。搭建了实物实验平台,实践验证了该抑制策略的有效性和可行性。

PWM激励下电工钢片磁特性测量与结果分析

随着电力电子技术的不断发展,逆变器供电凭借于独特优势已成为电机系统中不可替代的一部分。但是,逆变器供给激励电压中含有大量的高次谐波,由此造成电机的损耗增加明显,对电机的发热、效率、振动噪声都会带来不利影响。所以,为能够最优的设计电机,提高效率,就有必要清楚地掌握电机用电工钢片在实际工作状态下的磁特性和铁芯损耗数据。论文通过使用改进的爱波斯坦方圈,对无取向电工钢片进行了在脉宽调制(Pulse Width Modulation,PWM)激励下磁特性的测量,得到相应铁芯损耗。同时根据测量结果,分析讨论了PWM调制参数和铁芯损耗之间的关系。