Overview of Planar Magnetics for High-frequency Resonant Converters

With the continuous development of power supplies toward miniaturization,light weights,and high levels of integration,research on high-frequency resonant conversion based on planar magnetics is becoming extensive.Combining the soft-switching characteristics of resonant converters with those of wide bandgap devices,the switching frequency can be increase to the MHz range,and the power density of the entire system can be improved considerably.However,higher switching frequencies impose new requirements for the structural design,loss distribution,and common mode(CM)noise suppression of passive magnetic components.Herein,a thorough survey of the-state-of-the-art of planar magnetics in high-frequency resonant converters is conducted.Printed circuit board winding-based planar magnetics,magnetic integration,and power-loss optimization strategies are summarized in detail.Suppression methods for CM noise in high-frequency planar magnetics are also clarified and discussed.An insight view into the future development of planar magnetics for high-frequency resonant converters is presented.

Interleaved-Connected Split Planar Resonant Inductor Design in 1 kV SiC LLC Converters

Design method of split planar resonant inductor in 1 kV SiC logical link control(LLC)converter is proposed,which ensures the converter power density of 93.59 W/in^3 and peak efficiency of 95.73%.Split resonant inductor helps to provide symmetrical resonant current by symmetrical impedance,and improves the distortion of resonant current,which ensures the efficiency of the whole converter.An interleaved winding connecting scheme improves the power density of the planar magnets,which contributes to power density improvement.Design method and calculation process of such split planar resonant inductor are provided.To verify the feasibility of the proposed design method,a 1 kV/48 V 6.6 kW,210 k Hz SiC LLC prototype was built,and the experimental results are given.

Arm Voltage Balancing Control of Modular Multilevel Resonant Converter

Modular multilevel resonant converter is an promising candidate for high voltage applications since it has advantageous features,such as high efficiency,high voltage capability and easy fault-tolerant operation.However,the inequality of arm inductance in practice will lead to imbalance between the upper and lower arm voltages,which will induce large ripples in the circulating current and a dc bias on the voltage generated by modular circuits.To compensate for the voltage imbalance,effects of arm duty cycle changes on arm voltages are discussed.An arm voltage balancing control method is proposed:adjust arm duty cycle according to arm voltage deviation in every switching cycle.Simulation and experimental results are presented to validate the theoretical analysis and the proposed control method.

Performance Analysis of PI and Fuzzy Control for Modified LCC Resonant Converter Incorporating Boost Converter

In this paper, the modified LCC type of series-parallel Resonant Converter (RC) was designed and state-space modeling analysis was implemented. In this proposed converter, one leg of full bridge diode rectifier is replaced with Synchronous Rectifier (SR) switches. The proposed LCC converter is controlled using frequency modulation in the nominal state. During hold-up time, the SRswitches control is changed from in-phase to phase-shifted gate signal to obtain high DC voltage conversion ratio. Furthermore, the closed loop PI and fuzzy provide control on the output side without decreasing the switching frequency. The parameter such as conduction loss on primary and secondary side, switching loss, core and copper also reduced. Simultaneously, the efficiency is increased about 94.79 is realized by this scheme. The proposed converter with an input of 40 V is built to produce an output of 235 V with the help of ZVS boost converter [1] even under line and load disturbances. As a comparison, the closed loop fuzzy controller performance is feasible and less sensitive than PI controller.

Analysis and Design of a Kind of Improved Parallel Resonant Converters

Traditional transformer in high-voltage power supplies has many disadvantages such as high turn’s ratio, large volume and great design difficulties. Parallel resonant converters (PRCs) are widely used in high-voltage power supplies. A kind of high-voltage circuit topology can be formed by combining PRCs and voltage-doubler rectifier, which is called parallel resonant dual voltage converters (PRDVCs). In PRDVCs both voltage-doubler rectifier and transformer can boost voltage, which reduced turn’s ratio and volume of the transformer, making it easier to produce. Thus it not only realizes the high-voltage output, but also realizes the miniaturization of high-voltage power supply. Three modes of the converters were researched and simulated. Converting conditions of three modes were given. At last, PRDVCs was used to design a 5000V/50mA high-voltage power supply. The waveforms and results of the experiment were given, which validated the feasibility of the converters and its conversion efficiency might be improved to 93%.

Embedded Control of LCL Resonant Converter Analysis, Design, Simulation and Experimental Results

The Objective of this paper is to give more insight into CCM Operation of the LCL Converter to obtain op-timum design using state-space analysis and to verify the results using PSPICE Simulation for wide variation in loading conditions. LCL Resonant Full Bridge Converter (RFB) is a new, high performance DC-DC con-verter. High frequency dc-dc resonant converters are widely used in many space and radar power supplies owing to their small size and lightweight. The limitations of two element resonant topologies can be over-come by adding a third reactive element termed as modified series resonant converter (SRC). A three ele-ment resonant converter capable of driving voltage type load with load independent operation is presented. We have used embedded based triggering circuit and the embedded ‘C’ Program is checked in Keil Software and also triggering circuit is simulated in PSPICE Software. To compare the simulated results with hardware results and designed resonant converter is 200W and the switching frequency is 50 KHz.

Quasi-Square Wave Mode Phase-Shifted PWM LCC Resonant Converter for Regulated Power Supply

This paper presents an improved self sustained oscillating controller circuit using LCC components for improving the overall efficiency of the system. It has a micro controller based active controller, which controls the performance from no-load up to full-load. The steady state characteristics are developed and a design example is given in detail. The proposed controller allows zero current switching at any loading condition which results in a reasonable reduction of power loss during switching with a promising efficiency. Analytical and experimental results verify the achievement the design specifications.

Active Current Sharing of LCLC Resonant Converter with Switch-Controlled-Capacitor Technology

In this paper,an interleaved LCLC converter with enhancement-mode(E-mode)GaN devices is introduced to achieve the accurate current sharing performance for data center applications. Any tolerance in the resonant tank elements can lead to large load imbalance between any two different phases. Due to the steep gain curves of LCLC converters,conventional current sharing methods are not effective. In the proposed converter,the impedances of the resonant networks are matched by switching a capacitor,i.e.,switch controlled capacitor(SCC),in series with the resonant capacitor in one or some of the phases,which results in accurate load current sharing among the phases with an accuracy around 0.025%. The load share of a phase is sensed through the resonant current on it,and the control logic applied to such current sharing can be achieved. By this method,accurate current sharing is achieved for a wide input voltage range required for the hold-up time in data center applications. Interleaving is applied in the proposed multiphase LCLC converter,resulting in low current stress on the output capacitor and allowing ceramic capacitor implementation. Moreover,phase shedding accomplishes high light load efficiency. The performance of the proposed interleaved LCLC converter is verified by a two-phase 1 k W prototype with an input voltage ranging from 250 V to 400 V and a fixed 12 V output voltage.

A Resonant Dual Full-Bridge Class-E Bidirectional DC-DC Converter for Fuel Cell Electric Vehicle

The interests on energy storage schemes, bidirectional dc-dc converter and uninterruptible power supplies have been increasing nowadays as there wide researches are undertaken in the area of electric vehicles. A modified bi directional class-E resonant dc-dc converter is introduced here in this proposed topology for the application in electric vehicles. The advantages of soft switching techniques have been utilized for making analysis simple. The main advantage here in this system is that it can operate in a wide range of frequencies with minimal switching loss in transistors. This paper elaborates a detailed analysis on converter design and the same has been simulated and verified in Matlab/Simulink.

ANALYSIS OF ZERO-VOLTAGE QUASI-RESONANT BOOST DC-DC CONVERTER

The zero-voltage quasi-resonant boost switching DC-DC converter has been inves-tigated by using the time averaging equivalent circuit approach of periodically switching linearnetworks.The DC steady state and AC small signal characteristics of the converter are also given.

High efficiency and high transmission asymmetric polarization converter with chiral metasurface in visible and near-infrared region

Polarization manipulation of light is of great importance because it could promote development of wireless communications,biosensing,and polarization imaging.In order to use natural light more efficiently,it is highly demanded to design and fabricate high performance asymmetric polarization converters which could covert the natural light to one particular linearly polarized light with high efficiency.Traditionally,polarizers could be achieved by controllers with crystals and polymers exhibiting birefringence.However,the polarizers are bulky in size and the theoretical conversion efficiency of the polarizers is limited to 0.5 with unpolarized light incidence.In this paper,we propose a polarization converter which could preserve high transmission for one linearly polarized light and convert the orthogonal linearly polarized light to its cross-polarized with high transmittance based on a multi-layer chiral metasurface.Theoretical results show that normally incident y-polarized light preserves high transmittance for the wavelength range from 685 nm to 800 nm while the orthogonal normally incident x-polarized light is efficiently converted to the y-polarized light with high transmittance from 725 nm to 748 nm.Accordingly,for unpolarized light incidence,transmittance larger than 0.5 has been successfully achieved in a broadband wavelength range from 712 nm to 773 nm with a maximum transmittance of 0.58 at 732 nm.

Is the High-Frequency Signal Necessary for the Resonance in the Delayed System?

In a delayed system excited by low-frequency and high-frequency signals, the necessity of the high-frequency signal on the resonance is discussed. By adjusting the delay time, the resonance occurs in a wide scope of frequencies, including the primary, subharmonic and superharmonic frequencies. Only for very few cases does the high-frequency signal have a positive effect on the resonance. It is the traditional vibrational resonance phenomenon. In most situations, the high-frequency excitation is unnecessary for the resonance. An appropriate delay, rather than the high-frequency signal, is the key factor in improving the weak low-frequency signal.

High-frequency Resonance Analysis and Impedance Reshaping Control of MMC-HVDC System Based on Frequency Coupling Impedance Model

In recent years, high-frequency resonance (HFR) events occurred in several modular multilevel converter based high-voltage direct current (MMC-HVDC) projects. The time delay of an MMC-HVDC system is the critical factor that induces HFR. The frequency coupling affects the impedance characteristics of an MMC and further deteriorates system stability. Therefore, in this paper, a multi-input multi-output admittance model of an MMC-HVDC system is developed to analyze its frequency characteristics. The effects of current loop, power loop, phase-locked loop, and operating point on the MMC frequency coupling degree are analyzed in detail. Meanwhile, to further suppress HFR in the MMC-HVDC system, an enhanced impedance reshaping control strategy based on the equivalent single-input single-output impedance model is proposed. Finally, the accuracy of the enhanced impedance model and the effectiveness of the impedance reshaping control are verified by electromagnetic transient simulations in PSCAD.

Recent Developments of Modulation and Control for High-Power Current-Source-Converters Fed Electric Machine Systems

The pulse-width-modulated(PWM)current-source converters(CSCs)fed electric machine systems can be considered as a type of high reliability energy conversion systems,since they work with the long-life DC-link inductor and offer high fault-tolerant capability for short-circuit faults.Besides,they provide motor friendly waveforms and four-quadrant operation ability.Therefore,they are suitable for high-power applications of fans,pumps,compressors and wind power generation.The purpose of this paper is to comprehensively review recent developments of key technologies on modulation and control of high-power(HP)PWM-CSC fed electric machines systems,including reduction of low-order current harmonics,suppression of inductor–capacitor(LC)resonance,mitigation of common-mode voltage(CMV)and control of modular PWM-CSC fed systems.In particular,recent work on the overlapping effects during commutation,LC resonance suppression under fault-tolerant operation and collaboration of modular PMW-CSCs are described.Both theoretical analysis and some results in simulations and experiments are presented.Finally,a brief discussion regarding the future trend of the HP CSC fed electric machines systems is presented.

A zero-voltage transition for three-phase double-PWM voltage-fed converter

In comparison with several zero-voltage transition （ZVT） inverter topologies, a double-PWM converter is presented using a simple ZVT topology. The rectifier and inverter of this double-PWM share a set of commutation circuit which can provide soft-switching for the power devices and the diodes. The commutation circuit consists of 1 auxiliary device, 6 resonant inductors, and 12 diodes. Its topology is simpler than the conventional auxiliary resonant converter, leading to low loss and easy control. The control strategy and resonant working modes are analyzed. Experimental results show good performance of the system.

A novel design of power management integrated circuit with 90 plus efficiency used in AC/DC converter

Recently, resonant AC/DC converter has been accepted by the industry. However, the efficiency will be decreased at light load. So, a novel topology with critical controlling mode combined with resonant ones is proposed in this paper. The new topology can correspond to a 90 plus percent of power converting. So,a novel topology of an state of art integrated circuit, which can be used as power management circuit, has been designed based on the above new topology. A simulator which is specifically suitable for the power controller has been founded in this work and it has been used for the simulation of the novel architecture and the proposed integrated circuit.

一种基于耦合电感的高增益软开关谐振变换器

该文提出了一种具有高增益、软开关的新型谐振变换器。该谐振变换器使用耦合电感来提高电压增益,升压比不仅取决于占空比,还取决于耦合电感的变比,具有高增益的优点。此外,由于采用了有源钳位技术,漏感中的能量可以被回收利用,用来对开关管的结电容充放电提供能量,从而实现软开关。由于采用了耦合电感,所提出的变换器可以在较低的开关管电压应力的情况下实现较高的输出电压,因此可以使用低导通电阻的低压器件,从而提升系统的效率。该文分析了该谐振变换器的工作原理,并推导了输出电压、关断电流应力等参数的解析表达式。在此基础上,从理论上分析了该变换器取得软开关的条件,并对该变换器的各个器件的电压电流应力进行分析,为器件选型提供了理论依据。最后,搭建1kW实验样机,针对该文提出的基于耦合电感的谐振变换器的高增益、软开关、低电压应力、高效率等性能进行了实验验证。通过实验得出所提出的拓扑可以在10倍增益的情况下达到最高97.5%的效率,表明所提拓扑的优越性。

宽范围输入三电平半桥LLC变换器混合控制

针对传统变频(PFM)控制的LLC谐振变换器在宽电压输入条件下效率低的问题,提出一种三电平半桥LLC谐振变换器的变频-移相(PFM-PS)混合控制策略。首先,分析三电平半桥LLC谐振变换器的工作模态,建立其等效模型,获得了移相控制和变频控制下的电压增益曲线。其次,分析了变频控制的工作区间与软开关特性,推导得到了移相控制下实现软开关的最小占空比。通过混合控制策略,在升压时采用变频控制和在降压时采用移相控制,相较于全变频控制和全移相控制,混合控制可在较小频率变化范围内对电压进行升降压,在全增益范围内实现软开关,获得较宽的电压增益范围,提升了变换器的效率。最后,通过仿真和输入500~800 V/4.5 kW实验样机验证了所提出混合控制策略的有效性。