The present work studied the corrosion properties around the fusion boundaries of 2.25Cr-1Mo steel with stainless steel strip overlay joints under as welded condition and after post-weld heat treatment (PWHT) in H2 S ...The present work studied the corrosion properties around the fusion boundaries of 2.25Cr-1Mo steel with stainless steel strip overlay joints under as welded condition and after post-weld heat treatment (PWHT) in H2 S containing solution (NACE TM-01-77 standard) with different time. An in-situ observation method was introduced for evaluating corrosive progress in the fusion boundary in H2 S containing solution, that is, the samples were marked firstly at the boundary and then treated in the solution for variant time. Each time after the corrosion treatment, the observations were kept to focus at the same marked area by using scanning electron microscopy (SEM) to observe the corrosion progress. The results reveal that the fusion boundary is the worst region for corrosion resistance when comparing with other boundaries, and a broad fusion boundary has a stronger resistance for "hydrogen induced disbonding" than a narrow one.展开更多
With the aid of hydrogen permeating devices, the hydrogen permeation behaviors of X52 pipeline steel in NACE A solution with saturated H2S/CO2 were studied under the conditions of different ambient temperatures and pH...With the aid of hydrogen permeating devices, the hydrogen permeation behaviors of X52 pipeline steel in NACE A solution with saturated H2S/CO2 were studied under the conditions of different ambient temperatures and pH values, and the hydrogen permeation behaviors of X52 pipeline steel in weld seam zone were comparatively studied. The experimental results show that the hydrogen permeation coefficient value is directly proportional to the time required for reaching the saturation anode current and inversely proportional to the saturation anode current, and the hydrogen permeation coefficient is influenced by the corrosion scales; the temperature is directly proportional to the saturation anode current, and the hydrogen permeation coefficient is influenced by the temperature and corrosion scales, heat-affected zone and matrix zone in NACE A solution with saturated H2S/CO2 at normal temperature. The hydrogen permeation coefficient in weld seam zone is larger than that in heat-affected zone which is further larger than that in matrix zone.展开更多
焊接是承压设备制造过程的关键环节,承压设备配套焊材性能对承压设备的制造质量起关键作用,决定承压设备的最终性能。研制了用于临氢环境的15Cr Mo R(H)用R307L焊条与H08Cr Mo(H)/JWF201(H)埋弧焊材,对其焊接工艺及熔敷金属性能进行了...焊接是承压设备制造过程的关键环节,承压设备配套焊材性能对承压设备的制造质量起关键作用,决定承压设备的最终性能。研制了用于临氢环境的15Cr Mo R(H)用R307L焊条与H08Cr Mo(H)/JWF201(H)埋弧焊材,对其焊接工艺及熔敷金属性能进行了研究。特以焊接接头性能为主要指标,采取包括模拟封头热成型在内的多种热处理后,试验数据依旧保持了优异水平。分析焊接接头微观组织,其焊缝组织均为铁素体为主,有少量贝氏体和珠光体。展开更多
文摘The present work studied the corrosion properties around the fusion boundaries of 2.25Cr-1Mo steel with stainless steel strip overlay joints under as welded condition and after post-weld heat treatment (PWHT) in H2 S containing solution (NACE TM-01-77 standard) with different time. An in-situ observation method was introduced for evaluating corrosive progress in the fusion boundary in H2 S containing solution, that is, the samples were marked firstly at the boundary and then treated in the solution for variant time. Each time after the corrosion treatment, the observations were kept to focus at the same marked area by using scanning electron microscopy (SEM) to observe the corrosion progress. The results reveal that the fusion boundary is the worst region for corrosion resistance when comparing with other boundaries, and a broad fusion boundary has a stronger resistance for "hydrogen induced disbonding" than a narrow one.
基金Funded by the Program for National Science Foundation for Distinguished Young Scholars (No.51125019)the National Natural Science Foundation of China (No.50904050)+2 种基金the Basic Projects of Sichuan Province of China(No.2011JY0106)Postdoctoral Science Foundation(No.20110490810)the Special Fund of China's Central Government for the Development of Local Colleges and Universities-the Project of National First-level Discipline in Oil and Gas Engineering
文摘With the aid of hydrogen permeating devices, the hydrogen permeation behaviors of X52 pipeline steel in NACE A solution with saturated H2S/CO2 were studied under the conditions of different ambient temperatures and pH values, and the hydrogen permeation behaviors of X52 pipeline steel in weld seam zone were comparatively studied. The experimental results show that the hydrogen permeation coefficient value is directly proportional to the time required for reaching the saturation anode current and inversely proportional to the saturation anode current, and the hydrogen permeation coefficient is influenced by the corrosion scales; the temperature is directly proportional to the saturation anode current, and the hydrogen permeation coefficient is influenced by the temperature and corrosion scales, heat-affected zone and matrix zone in NACE A solution with saturated H2S/CO2 at normal temperature. The hydrogen permeation coefficient in weld seam zone is larger than that in heat-affected zone which is further larger than that in matrix zone.
文摘焊接是承压设备制造过程的关键环节,承压设备配套焊材性能对承压设备的制造质量起关键作用,决定承压设备的最终性能。研制了用于临氢环境的15Cr Mo R(H)用R307L焊条与H08Cr Mo(H)/JWF201(H)埋弧焊材,对其焊接工艺及熔敷金属性能进行了研究。特以焊接接头性能为主要指标,采取包括模拟封头热成型在内的多种热处理后,试验数据依旧保持了优异水平。分析焊接接头微观组织,其焊缝组织均为铁素体为主,有少量贝氏体和珠光体。
