High-grade pancreatic intraepithelial neoplasia diagnosed based on changes in magnetic resonance cholangiopancreatography findings:A case report

BACKGROUND High-grade pancreatic intraepithelial neoplasia(PanIN)exhibits no mass and is not detected by any examination modalities.However,it can be diagnosed by pancreatic juice cytology from indirect findings.Most previous cases were diagnosed based on findings of a focal stricture of the main pancreatic duct(MPD)and caudal MPD dilatation and subsequent pancreatic juice cytology using endoscopic retrograde cholangiopancreatography(ERCP).We experienced a case of high-grade PanIN with an unclear MPD over a 20-mm range,but without caudal MPD dilatation on magnetic resonance cholangiopancreatography(MRCP).CASE SUMMARY A 60-year-old female patient underwent computed tomography for a follow-up of uterine cancer post-excision,which revealed pancreatic cysts.MRCP revealed an unclear MPD of the pancreatic body at a 20-mm length without caudal MPD dilatation.Thus,course observation was performed.After 24 mo,MRCP revealed an increased caudal MPD caliber and a larger pancreatic cyst.We performed ERCP and detected atypical cells suspected of adenocarcinoma by serial pancreatic juice aspiration cytology examination.We performed a distal pancreatectomy and obtained a histopathological diagnosis of high-grade PanIN.Pancreatic parenchyma invasion was not observed,and curative resection was achieved.CONCLUSION High-grade Pan-IN may cause MPD narrowing in a long range without caudal MPD dilatation.

High-chromium vanadium-titanium magnetite all-pellet integrated burden optimization and softening-melting behavior based on flux pellets

High-chromium vanadium-titanium magnetite(HVTM)is a crucial polymetallic-associated resource to be developed.The allpellet operation is a blast furnace trend that aims to reduce carbon dioxide emissions in the future.By referencing the production data of vanadium-titanium magnetite blast furnaces,this study explored the softening-melting behavior of high-chromium vanadium-titanium magnetite and obtained the optimal integrated burden based on flux pellets.The results show that the burden with a composition of 70wt%flux pellets and 30wt%acid pellets exhibits the best softening-melting properties.In comparison to that of the single burden,the softening-melting characteristic temperature of this burden composition was higher.The melting interval first increased from 307 to 362℃and then decreased to 282℃.The maximum pressure drop(ΔPmax)decreased from 26.76 to 19.01 kPa.The permeability index(S)dropped from 4643.5 to 2446.8 kPa·℃.The softening-melting properties of the integrated burden were apparently improved.The acid pellets played a role in withstanding load during the softening process.The flux pellets in the integrated burden exhibited a higher slag melting point,which increased the melting temperature during the melting process.The slag homogeneity and the TiC produced by over-reduction led to the gas permeability deterioration of the single burden.The segregation of the flux and acid pellets in the HVTM proportion and basicity mainly led to the better softening-melting properties of the integrated burden.

Bulk geochemistry,Rb-Sr,Sm-Nd,and stable O-H isotope systematics of the Metzimevin high-grade iron ore deposit,Mbalam iron ore district,southern Cameroon

Bulk geochemistry,Sr,Nd,and O-H isotope systematics are reported for the first time on banded iron formation(BIF)-hosted high-grade iron ore at the northwestern segment of Congo Craton(CC).Located in Mbalam iron ore district,Southern Cameroon,Metzimevin iron ore deposit is a hematite-magnetite BIF system,dominated by SiO_(2)+Fe_(2)O_(3)(97.1 to 99.84 wt%),with low concentrations of clastic elements e.g.,Al_(2)O_(3),TiO_(2),and HFSE,depicting a nearly pure chemical precipitate.The REE+Y signature of the iron deposit displays strong positive Eu anomaly,strong negative Ce anomaly,and chondritic to superchondritic Y/Ho ratios,suggestive of formation by mixed seawater-high temperature hydrothermal fluids in oxidising environment.The^(87)Sr/^(86)Sr ratios of the BIF are higher than the maximum^(87)Sr/^(86)Sr evolution curves for all Archean reservoirs(bulk silicate earth,Archean crust and Archean seawater),indicating involvement of continentally-derived components during BIF formation and alteration.TheƐ_(Nd)(t)(+2.26 to+3.77)and Nd model age indicate that chemical constituents for the BIF were derived from undifferentiated crustal source,between 3.002 and 2.88 Ga.The variable and diverse O and H isotope data(−1.9‰to 17.3‰and−57‰to 136‰respectively)indicate that the Metzimevin iron ore formed initially from magmatic plumes and later enriched by magmatic-metamorphic-modified meteoric fluids.Mass balance calculations indicate mineralisation by combined leaching and precipitation,with an average iron enrichment factor of>2.67 and SiO_(2)depletion factor of>0.99.This is associated with an overall volume reduction of 28.27%,reflecting net leaching and volume collapse of the BIF protholith.

Effect of titanium on the sticking of pellets based on hydrogen metallurgy shaft furnace:Behavior analysis and mechanism evolution

Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium magnetite.However,in this process,the sticking of pellets occurs due to the aggregation of metal-lic iron between the contact surfaces of adjacent pellets and has a serious negative effect on the continuous operation.This paper presents a detailed experimental study of the effect of TiO2 on the sticking behavior of pellets during direct reduction under different conditions.Results showed that the sticking index(SI)decreased linearly with the increasing TiO2 addition.This phenomenon can be attributed to the increase in unreduced FeTiO3 during reduction,leading to a decrease in the number and strength of metallic iron interconnections at the sticking interface.When the TiO2 addition amount was raised from 0 to 15wt%at 1100°C,the SI also increased from 0.71%to 59.91%.The connection of the slag phase could be attributed to the sticking at a low reduction temperature,corresponding to the low sticking strength.Moreover,the interconnection of metallic iron became the dominant factor,and the SI increased sharply with the increase in re-duction temperature.TiO2 had a greater effect on SI at a high reduction temperature than at a low reduction temperature.

Management of retroperitoneal high-grade serous carcinoma of unknown origin:A case report

BACKGROUND Retroperitoneal high-grade serous carcinoma(HGSC)of unknown origin is a sporadic tumor that can originate from ovarian cancer.Herein,we report the case of a woman with retroperitoneal HGSC of unknown origin and describe how she was diagnosed and treated.CASE SUMMARY A 71-year-old female presented with the tumor marker CA125 elevated to 1041.9 U/mL upon a regular health examination.Computed tomography revealed retroperitoneal lymph node enlargement.Subsequently,positron emission tomography scanning revealed lesions with increased F-18 fluorodeoxyglucose uptake at the nodes.As a result,she underwent laparoscopic lymph node resection,and pathology revealed metastatic adenocarcinoma with CK7(+),PAX8(+),WT1(+),PR(-),and p53 mutational loss of expression,indicating that the origin may be from the adnexa.The patient was admitted to our ward and underwent laparoscopic staging;however,the pathological results were negative.Under the suspicion of retroperitoneal HGSC of unknown origin,chemotherapy and targeted therapy were initiated.Tumor marker levels decreased after treatment.CONCLUSION We present a case of HGSC of unknown origin managed using retroperitoneal lymphadenectomy,staging surgery,chemotherapy,and targeted therapy.

Transformation of marginal zone lymphoma into high-grade B-cell lymphoma expressing terminal deoxynucleotidyl transferase:A case report

BACKGROUND High-grade B-cell lymphoma(HGBL)is an unusual malignancy that includes myelocytomatosis viral oncogene(MYC),B-cell lymphoma-2(BCL-2),and/or BCL-6 rearrangements,termed double-hit or triple-hit lymphomas,and HGBL-not otherwise specific(HGBL-NOS),which are morphologically characteristic of HGBL but lack MYC,BCL-2,or BCL-6 rearrangements.HGBL is partially transformed by follicular lymphoma and other indolent lymphoma,with few cases of marginal zone lymphoma(MZL)transformation.HGBL often has a poor prognosis and intensive therapy is currently mainly advocated,but there is no good treatment for these patients who cannot tolerate chemotherapy.CASE SUMMARY We reported a case of MZL transformed into HGBL-NOS with TP53 mutation and terminal deoxynucleotidyl transferase expression.Gene analysis revealed the gene expression profile was identical in the pre-and post-transformed tissues,suggesting that the two diseases are homologous,not secondary tumors.The chemotherapy was ineffective and the side effect was severe,so we tried combination therapy including venetoclax and obinutuzumab.The patient tolerated treatment well,and reached partial response.The patient had recurrence of hepatocellular carcinoma and died of multifunctional organ failure.He survived for 12 months after diagnosis.CONCLUSION Venetoclax combined with obinutuzumab might improve the survival in some HGBL patients,who are unsuitable for chemotherapy.

Probing deactivation by coking in catalyst pellets for dry reforming of methane using a pore network model

Dry reforming of methane(DRM) is an attractive technology for utilizing the greenhouse gases(CO_(2) and CH_(4)) to produce syngas. However, the catalyst pellets for DRM are heavily plagued by deactivation by coking, which prevents this technology from commercialization. In this work, a pore network model is developed to probe the catalyst deactivation by coking in a Ni/Al_(2)O_(3) catalyst pellet for DRM. The reaction conditions can significantly change the coking rate and then affect the catalyst deactivation. The catalyst lifetime is higher under lower temperature, pressure, and CH_(4)/CO_(2) molar ratio, but the maximum coke content in a catalyst pellet is independent of these reaction conditions. The catalyst pellet with larger pore diameter, narrower pore size distribution and higher pore connectivity is more robust against catalyst deactivation by coking, as the pores in this pellet are more difficult to be plugged or inaccessible.The maximum coke content is also higher for narrower pore size distribution and higher pore connectivity, as the number of inaccessible pores is lower. Besides, the catalyst pellet radius only slightly affects the coke content, although the diffusion limitation increases with the pellet radius. These results should serve to guide the rational design of robust DRM catalyst pellets against deactivation by coking.

Comparison of biological behavior of lacrimal gland adenoid cystic carcinoma with high-grade transformation cells

AIM:To evaluate the differences between human lacrimal gland adenoid cystic carcinoma with high-grade transformation(LACC-HGT)primar y cells cultured by high-grade transformation tissue and non-high-grade transformation(non-HGT)primary cells cultured by non-highgrade transformation tissue in proliferation,metastasis,drug susceptibility,and genes.METHODS:LACC-HGT primary cells were established by tissue block culture,and the 4^(th)to 10^(th)generation primary cells were selected as research objects.The cells were preliminarily identified by immunofluorescent staining.The differences between non-HGT and LACC-HGT primary cells in terms of proliferation,metastasis,and drug susceptibility were compared by cell counting kit-8(CCK-8)assay,wound healing,and drug sensitivity experiments.Differentially expressed genes were screened using mRNA array.Gene expression was analyzed using real-time quantitative polymerase chain reaction(RT-qPCR).RESULTS:LACC-HGT primary cells were successfully cultured by tissue block culture.Immunofluorescence staining results showed that cytokeratin(CK)and CK7 expression levels were positive in LACC-HGT primary cells.CCK-8 results showed that the proliferation ability of LACCHGT cells was significantly higher than that of non-HGT cells.Wound healing experiment showed that the migration ability of LACC-HGT cells was significantly higher than that of non-HGT cells.LACC-HGT cells were also less sensitive to cisplatin and paclitaxel than non-HGT cells.Compared with non-HGT cells,9566 differentially expressed genes were found in LACC-HGT primary cells,of which 5162 were upregulated and 4404 were down-regulated.The expression of N-acetylneuraminate pyruvate lyase(NPL),MARVEL domain containing 3(MARVELD3),syntabulin(SYBU),and allograft inflammatory factor 1(AIF1)was higher in LACCHGT cells than in non-HGT cells,whereas that of periostin(POSTN)was lower.CONCLUSION:LACC-HGT primary cells have faster proliferation,stronger migration ability,and poorer sensitivity to chemotherapy drugs than non-HGT primary cells.The expression of mRNAs in non-HGT and LACC-HGT primary cells are significantly different.These features are speculated to be the reasons why high-grade transformation tissues exhibit higher malignant degree and poorer prognosis than their counterparts.

The Logistics of Production and Supply of Ag Pellets for Industrial Applications in Canada

In this work we analyze the supply of biomass from field to an in-land or port destination. The biomass is pelletized to increase its bulk density to extend its storage period and for ease of its transport. The pellet may be used for conversion to chemicals and animal bedding or for straight combustion. We analyzed supply chain in Saskatchewan where there are plenty of crop residues but widely dispersed and harvest seasons are short. We envisioned that the farmer collects bales from field and transports the bales to farmstead during the harvest season. The bales are then processed into pellets using small scale pellet equipment. A custom operator with expertise in pelletization may engage in handling and densifying the biomass. The business case for the mobile mill will be similar to the well established custom grain and forage harvesting operations. The pellets are stored in hopper bottom grain bins at the farmstead. From this point, the handling of pellets would be similar to the handling and marketing of grain. The farmer trucks a specified volume of pellets from farmstead to the nearest elevator where the pellets are transferred to larger bins or silos. Pellets are extracted from silos and loaded onto the rail cars. The Canadian freight rail companies (mainly CN) currently transport over 3 million dry tonne (dt) of wood pellets in rail cars. The pellets are hauled to marine ports on the West Coast or East Coast for export. The cost of delivering ag pellets to biorefinery or to the shipping port is $86.09/dt. This cost does not include the equivalent value of removing biomass from the farm (e.g. fertilizer replacement) and return on investment. The GHG emissions to produce and transport ag pellets add up to 185.9 kg of CO2 per dt of biomass. The cost of producing pellets without drying feedstock is $35.05/dt and the corresponding GHG for palletization amounts $146.30/dt.

Effect mechanism of aluminum occurrence and content on the induration characteristics of iron ore pellets

With the intensified depletion of high-grade iron ores,the increased aluminum content in iron ore concentrates has become unavoidable,which is detrimental to the pelletization process.Therefore,the effect mechanism of aluminum on pellet quality must be identified.In this study,the influence of aluminum occurrence and content on the induration of hematite(H)and magnetite(M)pellets was investigated through the addition of corresponding Al-containing additives,including alumina,alumogoethite,gibbsite,and kaolinite.Systematic mineralogical analysis,combined with the thermodynamic properties of different aluminum occurrences and the quantitative characterization of consolidation behaviors,were conducted to determine the related mechanism.The results showed that the alumina from various aluminum occurrences adversely affected the induration characteristics of pellets,especially at an aluminum content of more than 2.0wt%.The thermal decomposition of gibbsite and kaolinite tends to generate internal stress and fine cracks,which hinder the respective microcrystalline bonding and recrystallization between Fe2O3particles.The adverse effect on the induration characteristics of fired pellets with different aluminum occurrences can be relieved to varying degrees through the formation of liquid phase bonds between the hematite particles.Kaolinite is more beneficial to the induration process than the other three aluminum occurrences because of the formation of more liquid phase,which improves pellet consolidation.The research results can further provide insights into the effect of aluminum occurrence and content in iron ore concentrates on downstream processing and serve as a guide for the utilization of high-alumina iron ore concentrates in pelletization.

Application of convolutional neural network-based endoscopic imaging in esophageal cancer or high-grade dysplasia: A systematic review and meta-analysis

BACKGROUND Esophageal cancer is the seventh-most common cancer type worldwide,accounting for 5%of death from malignancy.Development of novel diagnostic techniques has facilitated screening,early detection,and improved prognosis.Convolutional neural network(CNN)-based image analysis promises great potential for diagnosing and determining the prognosis of esophageal cancer,enabling even early detection of dysplasia.METHODS PubMed,EMBASE,Web of Science and Cochrane Library databases were searched for articles published up to November 30,2022.We evaluated the diagnostic accuracy of using the CNN model with still image-based analysis and with video-based analysis for esophageal cancer or HGD,as well as for the invasion depth of esophageal cancer.The pooled sensitivity,pooled specificity,positive likelihood ratio(PLR),negative likelihood ratio(NLR),diagnostic odds ratio(DOR)and area under the curve(AUC)were estimated,together with the 95%confidence intervals(CI).A bivariate method and hierarchical summary receiver operating characteristic method were used to calculate the diagnostic test accuracy of the CNN model.Meta-regression and subgroup analyses were used to identify sources of hetero-geneity.RESULTS A total of 28 studies were included in this systematic review and meta-analysis.Using still image-based analysis for the diagnosis of esophageal cancer or HGD provided a pooled sensitivity of 0.95(95%CI:0.92-0.97),pooled specificity of 0.92(0.89-0.94),PLR of 11.5(8.3-16.0),NLR of 0.06(0.04-0.09),DOR of 205(115-365),and AUC of 0.98(0.96-0.99).When video-based analysis was used,a pooled sensitivity of 0.85(0.77-0.91),pooled specificity of 0.73(0.59-0.83),PLR of 3.1(1.9-5.0),NLR of 0.20(0.12-0.34),DOR of 15(6-38)and AUC of 0.87(0.84-0.90)were found.Prediction of invasion depth resulted in a pooled sensitivity of 0.90(0.87-0.92),pooled specificity of 0.83(95%CI:0.76-0.88),PLR of 7.8(1.9-32.0),NLR of 0.10(0.41-0.25),DOR of 118(11-1305),and AUC of 0.95(0.92-0.96).CONCLUSION CNN-based image analysis in diagnosing esophageal cancer and HGD is an excellent diagnostic method with high sensitivity and specificity that merits further investigation in large,multicenter clinical trials.

Simulation of deuterium pellet ablation and deposition in the EAST tokamak with HPI2 code

Pellet injection is a primary method for fueling the plasma in magnetic confinement devices.For that goal the knowledges of pellet ablation and deposition profiles are critical.In the present study,the pellet fueling code HPI2 was used to predict the ablation and deposition profiles of deuterium pellets injected into a typical H-mode discharge on the EAST tokamak.Pellet ablation and deposition profiles were evaluated for various pellet injection locations,with the aim at optimizing the pellet injection to obtain a deep fueling depth.In this study,we investigate the effect of the injection angle on the deposition depth of the pellet at different velocities and sizes.The ablation and deposition of the injected pellet are mainly studied at each injection position for three different injection angles:0°,45°,and 60°.The pellet injection on the high field side(HFS)can achieve a more ideal deposition depth than on the low field side(LFS).Among these angles,horizontal injection on the middle plane is relatively better on either the HFS or the LFS.When the injection location is 0.468 m below the middle plane on the HFS or 0.40 m above the middle plane of the LFS,it can achieve a similar deposition depth to the one of its corresponding side.When the pre-cooling effect is taken into account,the deposition depth is predicted to increase only slightly when the pellet is launched from the HFS.The findings of this study will serve as a reference for the update of pellet injection systems for the EAST tokamak.

Pelleting and particle size reduction of corn increase net energy and digestibility of fiber,protein,and fat in corn-soybean meal diets fed to group-housed pigs

Background Reduction of the particle size of corn increases energy digestibility and concentrations of digestible and metabolizable energy.Pelleting may also reduce particle size of grain,but it is not known if there are interactions between particle size reduction and pelleting.The objective of this experiment was to test the hypothesis that particle size reduction and pelleting,separately or in combination,increase N balance,apparent total tract digestibility(ATTD)of fiber and fat,and net energy(NE)in corn-soybean meal diets fed to group-housed pigs.Methods Six corn-soybean meal-based diets were used in a 3×2 factorial design with 3 particle sizes of corn(i.e.,700,500,or 300μm)and 2 diet forms(i.e.,meal or pelleted).Pigs were allowed ad libitum access to feed and water.Twenty-four castrated male pigs(initial weight:29.52 kg;standard diviation:1.40)were allotted to the 6 diets using a 6×6 Latin square design with 6 calorimeter chambers(i.e.,4 pigs/chamber)and 6 periods.Oxygen consumption and CO_(2)and CH_(4)productions were measured during fed and fasting states and fecal and urine samples were collected.Results Regardless of particle size of corn,the ATTD of gross energy(GE),N,and acid-hydrolyzed ether extract(AEE),and the concentration of NE were greater(P<0.05)in pelleted diets than in meal diets.Regardless of diet form,the ATTD of GE,N,and AEE,and the concentration of NE were increased(linear;P<0.05)by reducing the particle size of corn,but the increase was greater in meal diets than in pelleted diets(interaction;P<0.05).Conclusions Both pelleting and reduction of corn particle size increased nutrient digestibility and NE,but increases were greater in meal diets than in pelleted diets.

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.

A Case Report: High-Grade Urothelial Carcinoma in the Renal Pelvis with Complete Kidney and Ureter Duplication Featuring Heterologous Differentiation

This report describes a considerably rare case of high-grade urothelial carcinoma of the renal pelvis and ureter,presenting with heterologous differentiation,in a patient with bilateral duplicated kidneys.A 73-year-old male experienced intermittent gross hematuria for 5 months,accompanied by lower back and abdominal pain.Ultrasound and computed tomography scans revealed bilateral renal and ureteral duplication with multiple tumors in the left renal pelvis.A total nephroterectomy and bladder cuff resection were performed on the left two nephrons.Multiple space-occupying lesions were identified in the left renal pelvis and ureter.Histopathological examination showed poorly differentiated and diverse tumor cells,manifesting as sarcomatoid carcinoma,papillary adenocarcinoma,and infiltrating high-grade urothelial carcinoma.The tumor infiltrated the subcutaneous fibrous connective tissue of the renal pelvis and the full thickness of the ureter.Given the rarity of recurrent renal urothelial carcinoma with heterogeneous differentiation,comprehensive imaging and pathological assessments are vital to delineate the nature of the lesion and the direction of tissue pathological heterologous differentiation.These evaluations guide early radical surgical interventions,improving survival rates.

Persicaria lanigera (Polygonaceae) leaf extract exhibits antiulcerogenic and antiproliferative activities against acetic acid-induced ulcerative colitis and cotton pellet-induced granuloma tissue in rats

Objective:To assess the effect of leaf extract of Persicaria lanigera on cotton pellet-induced granuloma tissue formation and acetic acid-induced ulcerative colitis.Methods:Rats were randomly divided into six groups:normal control,negative control,positive control(dexamethasone or sulfasalazine)as well as Persicaria lanigera(100-600 mg/kg)-treated groups.The effects of the extracts on body weight,antioxidant,and hematological parameters,as well as mast cell proliferation,were assessed.In addition,a histological evaluation was conducted.Results:Persicaria lanigera extract significantly decreased the mean exudate amount and suppressed granuloma tissue formation in a concentration-dependent manner in rats(P<0.05).Additionally,the extract significantly increased body weight,improved hematological profile,reduced the disease activity index score and malondialdehyde level,as well as enhanced catalase and superoxide dismutase activities(P<0.05).Histological evaluation showed Persicaria lanigera extract alleviated acetic acid-induced colonic damages,as evidenced by decreased cell necrosis,edema,and inflammatory cell infiltration.Conclusions:Persicaria lanigera extract possesses antiproliferative,antioxidative,and anti-colitis activities.However,its underlying mechanisms of action need further investigation.

高浓度甲状腺素对软骨细胞聚集体(pellets)体外形成软骨组织的作用

目的：药物浓度（100nM）甲状腺素对组织工程软骨形成的作用。方法：将软骨细胞聚集体分为常规培养组（DMED＋10％FBS）和100nM甲状腺素组（DMED＋10％FBS＋100nM甲状腺素），体外培养1、2和3周取材进行大体形态、组织学、二型胶原和十型胶原免疫组化染色和软骨特异基因PCR分析。结果：100nM甲状腺素组形成的软骨细胞聚集体的体积和湿重均明显低于常规培养组，甲苯胺兰、二型胶原（C01II）染色较常规培养组弱，软骨细胞特异基因的表达水平与常规培养组相似，软骨细胞肥大相关基因十型胶原（ColX）及基质金属蛋白酶13（MMP13）的表达较对照组减弱，成骨方向分化相关基因（ColI，Runx2）的表达与常规培养组相似。结论：高浓度甲状腺素能够抑制软骨细胞肥大，但同时也抑制了软骨细胞增殖和软骨细胞基质分泌。

An Innovative Process for Direct Reduction of Cold bound Pellets from Iron Concentrate with a Coal-based Rotary Kiln

Successfully developed an innovative process of direct reduction of cold bound pellets from iron ore concentrate with a coal based rotary kiln, in comparison with the traditional direct reduction of fired oxide pellets in coal based rotary kilns , possesses such advantages as: shorter flowsheet, lower capital investment, greater economic profit, good quality of direct reduced iron. The key technologies , such as the composite binder and corresponding feasible techniques were employed in practice. A mill utilizing this process and with an annual capacity of 50 thousand ton DRI has been put into operation.

Effect of carbon species on the reduction and melting behavior of boron-bearing iron concentrate/carbon composite pellets

Iron nugget and boron-rich slag can be obtained in a short time through high-temperature reduction of boron- bearing iron concentrate by carbonaceous material, both of which are agglomerated together as a carbon composite pellet. This is a novel flow sheet for the comprehensive utilization of boron-bearing iron concentrate to produce a new kind of man-made boron ore. The effect of reducing agent species （i.e., carbon species） on the reduction and melting process of the composite pellet was investigated at a laboratory scale in the present work. The results show that, the reduction rate of the composite pellet increases from bituminite, anthracite, to coke at temperatures ranging from 950 to 1300~C. Reduction temperature has an important effect on the microstructure of reduced pellets. Carbon species also affects the behavior of reduced metallic iron particles. The anthracite-bearing composite pellet melts faster than the bituminite- bearing composite pellet, and the coke-bearing composite pellet cannot melt due to the high fusion point of coke ash. With anthracite as the reducing agent, the recovery rates of iron and boron are 96.5% and 95.7%, respectively. This work can help us get a further understanding of the new process mechanism.

Oxidation behavior of artificial magnetite pellets

The oxidation behavior of artificial magnetite pellets was investigated through measurements of the oxidation degree and mineralogical analysis. The results show that artificial magnetite pellets are much easier to oxidize than natural magnetite. The oxidation is controlled through two different reaction mechanisms. The oxidation of artificial magnetite is dominated by internal diffusion, with an activation energy of 8.40 kJ/mol, at temperatures less than 800°C, whereas it is controlled by chemical reaction, with a reaction activation energy of 67.79 kJ/mol, at temperatures greater than 800°C. In addition, factors such as the oxygen volume fraction and the pellet diameter strongly influence the oxidation of artificial magnetite: a larger oxygen volume fraction and a smaller pellet diameter result in a much faster oxidation process.