The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, la...The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, large burial depth, and strong heterogeneity under the control of faulting and karstification. Based on geological, logging, and seismic data, this study classified the Ordovician fault-karst reservoirs in the Yuejin block of the Tahe oilfield into three types, namely karst-cave, dissolved-vug, and fractured types, and established the integrated identification criteria of the three types of reservoirs. This study characterized karst caves, dissolved vugs, and multi-scale faults through seismic wave impedance inversion and frequency-domain detection of multi-scale faults. 3D geological models of different types of reservoirs were built using the combined deterministic and stochastic methods and characterized the spatial distribution of multi-scale faults, karst caves, dissolved vugs, and physical property parameters of reservoir. This study established the method for the geological modeling of fault-karst reservoirs, achieved the quantitative characterization and revealed the heterogeneity of fault-karst reservoirs. The karst-cave and dissolved-vug types are high in porosity and act as reservoirs, while the fractured type is high in permeability and act as flow pathway. This study lays the foundation for the development index prediction, well emplacement, and efficient development of the fault-karst carbonate reservoirs.展开更多
Nickel nitrate was introduced into carbon blocks by using ECA aggregates as catalyst-carrier.The Ni-containing anthracite aggregates were firstly prepared by mixing anthracite aggregates in nickel nitrate ethanol solu...Nickel nitrate was introduced into carbon blocks by using ECA aggregates as catalyst-carrier.The Ni-containing anthracite aggregates were firstly prepared by mixing anthracite aggregates in nickel nitrate ethanol solution and then incorporated into carbon blocks after pre-treating.The phase composition,microstructure and properties of all carbon blocks fired at 1 000℃or 1 400℃in a coke bed were studied with the aid of an X-ray diffractomer,a field emission scanning electron microscope,a mercury porosimetry and a laser thermal conductivity meter.The results showed that the addition of Ni-containing anthracite aggregates promoted the formation of one-dimensional nanocarbon andβ-SiC whiskers at 1 000℃and the growth ofβ-Sialon at 1 400℃,respectively.Moreover,the cold compressive strength and microporosity characteristics of the carbon blocks with the addition of Ni-containing anthracite aggregates were enhanced and the thermal conductivity was remarkably improved attributing to the high heat conductive network formed by the ceramic phases.展开更多
A novel carbon matrix/silicon nanowires(SiNWs) heterogeneous block was successfully produced by dispersing SiNWs into templated carbon matrix via a modified evaporation induced self-assembly method. The heterogeneous ...A novel carbon matrix/silicon nanowires(SiNWs) heterogeneous block was successfully produced by dispersing SiNWs into templated carbon matrix via a modified evaporation induced self-assembly method. The heterogeneous block was determined by X-ray diffraction, Raman spectra and scanning electron microscopy. As an anode material for lithium batteries, the block was investigated by cyclic voltammograms(CV), charge/discharge tests, galvanostatic cycling performance and A. C. impedance spectroscopy. We show that the SiNWs disperse into the framework, and are nicely wrapped by the carbon matrix. The heterogeneous block exhibits superior electrochemical reversibility with a high specific capacity of 529.3 mAh/g in comparison with bare SiNWs anode with merely about 52.6 mAh/g capacity retention. The block presents excellent cycle stability and capacity retention which can be attributed to the improvement of conductivity by the existence of carbon matrix and the enhancement of ability to relieve the large volume expansion of SiNWs during the lithium insertion/extraction cycle. The results indicate that the as-prepared carbon matrix/SiNWs heterogeneous block can be an attractive and potential anode material for lithium-ion battery applications.展开更多
Better dealing with carbon issues can support the management of current greenhouse gas emissions while achieving energy economic diversification and energy security. Carbon dioxide displacement has become the most ack...Better dealing with carbon issues can support the management of current greenhouse gas emissions while achieving energy economic diversification and energy security. Carbon dioxide displacement has become the most acknowledged and practical method in enhanced oil recovery system. This is because of its oil sweep efficiency and ability to reduce the level of greenhouse gas emission. Nevertheless, it would lead to the organic solid phase deposition, which causes the changes of the wettability and the damages of wellbores and reservoirs. In this study, we used slim tube test and component test to research the dynamic characteristics of displacement process. In addition, the mechanism of porous media blockage was also investigated. Results show that when the displacement pressure closed to the minimum miscibility pressure, reservoir blockage in pore throat could happen. Component test characterizes that during near miscible displacement process, the components of oil sample varied obviously, the variation range of peak component carbon marks fluctuated strongly. Crude oil component differentiation could happen after carbon dioxide fully contacted with oil. Besides, the rapid extraction mechanism of aromatic hydrocarbons played a significant role in this process under such condition. The reason is that the solubility of saturated hydrocarbons to asphaltene and non-hydrocarbons is obviously weaker than aromatic hydrocarbons. Controlling the pressure is considered as an important link to prevent the occurrence of blocking in the carbon dioxide multiphase and multicomponent displacement process.展开更多
废电解铝阳极碳块经过高温碳化,通过盐酸-硝酸-高氯酸三酸溶解完全后,冷却,完全溶解盐类加入10 mL 1.19 g/mL的盐酸,在优选出最优的仪器工作状态下,创建了ICP-AES法测定废电解铝阳极碳块样品中Fe、Li、K、Ca、Mg的化学分析方法。每个元...废电解铝阳极碳块经过高温碳化,通过盐酸-硝酸-高氯酸三酸溶解完全后,冷却,完全溶解盐类加入10 mL 1.19 g/mL的盐酸,在优选出最优的仪器工作状态下,创建了ICP-AES法测定废电解铝阳极碳块样品中Fe、Li、K、Ca、Mg的化学分析方法。每个元素的校准曲线相关系数均大于0.999,同时对以上多种元素进行检出限、加标回收试验研究,结果表明其相对标准偏差(n=8)为0.60%~2.24%,加标回收率在97.1%~104%。展开更多
传统阴极炭块顶部是平坦的,阴极铝液流动时几乎没有阻力。使用表面凸起的阴极炭块进行研究,目的是增加铝电解槽中铝液流动的阻力,起到减波和减少铝液流动速度的作用,以此降低水平电流密度、阴极电压和铝液流速,保障铝电解槽生产安全稳...传统阴极炭块顶部是平坦的,阴极铝液流动时几乎没有阻力。使用表面凸起的阴极炭块进行研究,目的是增加铝电解槽中铝液流动的阻力,起到减波和减少铝液流动速度的作用,以此降低水平电流密度、阴极电压和铝液流速,保障铝电解槽生产安全稳定。通过COMSOL软件进行模拟,发现随着阴极炭块表面凸起块数的增加,阴极压降和水平电流密度均呈下降趋势,其中阴极压降最大降幅为39.8 mV,水平电流密度最大降幅为2087 A m^(2),并对某铝厂400 kA铝电解槽使用异形阴极炭块后进行测试,测试结果与模拟结果一致。展开更多
Waste-to-Energy treatment is a promising path to environment and energy management in the future.This work detailed a binary molten salt thermal treatment methodology for the detoxification of spent cathode carbon blo...Waste-to-Energy treatment is a promising path to environment and energy management in the future.This work detailed a binary molten salt thermal treatment methodology for the detoxification of spent cathode carbon block(SCCB)waste and the recycling of carbonaceous materials.The thermal behavior of SCCB and SCCB blended with molten salts was investigated.It was found that the NaCl-Na_(2)CO_(3)binary molten salts significantly contributed to reducing pyrolysis onset temperature by 334.3 K compared to that of SCCB itself(i.e.,activation energy of pyrolysis reaction was reduced from 4.24×10^(5)to 2.30×10^(5)J/mol),thus helping to lower thermal treatment energy consumption.With the addition of binary molten salts,the residue after thermal treatment in a horizontal tube furnace experiment was separated into two layers.The bottom-layer residue was mainly composed of molten salts.The fluorine content in the form of NaF and CaF_(2)of top-layer residue was reduced significantly while the carbon content remained unchanged.Specifically,the leaching concentration of fluoride ion was decreased from 4620 mg/L to 856 mg/L.It is noted that the NaF and CaF_(2)can be removed through water-leaching and hydrothermal acid-leaching methods and thus the carbonaceous materials with a calorific value of 17.5 MJ/kg were obtained.展开更多
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (XDA14010204).
文摘The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, large burial depth, and strong heterogeneity under the control of faulting and karstification. Based on geological, logging, and seismic data, this study classified the Ordovician fault-karst reservoirs in the Yuejin block of the Tahe oilfield into three types, namely karst-cave, dissolved-vug, and fractured types, and established the integrated identification criteria of the three types of reservoirs. This study characterized karst caves, dissolved vugs, and multi-scale faults through seismic wave impedance inversion and frequency-domain detection of multi-scale faults. 3D geological models of different types of reservoirs were built using the combined deterministic and stochastic methods and characterized the spatial distribution of multi-scale faults, karst caves, dissolved vugs, and physical property parameters of reservoir. This study established the method for the geological modeling of fault-karst reservoirs, achieved the quantitative characterization and revealed the heterogeneity of fault-karst reservoirs. The karst-cave and dissolved-vug types are high in porosity and act as reservoirs, while the fractured type is high in permeability and act as flow pathway. This study lays the foundation for the development index prediction, well emplacement, and efficient development of the fault-karst carbonate reservoirs.
基金financial support from the National Natural Science Foundation of China (51574186)
文摘Nickel nitrate was introduced into carbon blocks by using ECA aggregates as catalyst-carrier.The Ni-containing anthracite aggregates were firstly prepared by mixing anthracite aggregates in nickel nitrate ethanol solution and then incorporated into carbon blocks after pre-treating.The phase composition,microstructure and properties of all carbon blocks fired at 1 000℃or 1 400℃in a coke bed were studied with the aid of an X-ray diffractomer,a field emission scanning electron microscope,a mercury porosimetry and a laser thermal conductivity meter.The results showed that the addition of Ni-containing anthracite aggregates promoted the formation of one-dimensional nanocarbon andβ-SiC whiskers at 1 000℃and the growth ofβ-Sialon at 1 400℃,respectively.Moreover,the cold compressive strength and microporosity characteristics of the carbon blocks with the addition of Ni-containing anthracite aggregates were enhanced and the thermal conductivity was remarkably improved attributing to the high heat conductive network formed by the ceramic phases.
基金supported by the grants from the National Natural Science Foundation of China(Nos.51002129,51172191 and 11074211)the National Basic Research Program of China(2012CB921303)+2 种基金the Doctoral Program of Higher Education(No.200805300003)the Hunan Provincial InnovationFoundation for Graduate(No.CX2012B265)the Open Fund Based on Innovation Platform of Hunan Colleges and Universities(No.13K045)
文摘A novel carbon matrix/silicon nanowires(SiNWs) heterogeneous block was successfully produced by dispersing SiNWs into templated carbon matrix via a modified evaporation induced self-assembly method. The heterogeneous block was determined by X-ray diffraction, Raman spectra and scanning electron microscopy. As an anode material for lithium batteries, the block was investigated by cyclic voltammograms(CV), charge/discharge tests, galvanostatic cycling performance and A. C. impedance spectroscopy. We show that the SiNWs disperse into the framework, and are nicely wrapped by the carbon matrix. The heterogeneous block exhibits superior electrochemical reversibility with a high specific capacity of 529.3 mAh/g in comparison with bare SiNWs anode with merely about 52.6 mAh/g capacity retention. The block presents excellent cycle stability and capacity retention which can be attributed to the improvement of conductivity by the existence of carbon matrix and the enhancement of ability to relieve the large volume expansion of SiNWs during the lithium insertion/extraction cycle. The results indicate that the as-prepared carbon matrix/SiNWs heterogeneous block can be an attractive and potential anode material for lithium-ion battery applications.
文摘Better dealing with carbon issues can support the management of current greenhouse gas emissions while achieving energy economic diversification and energy security. Carbon dioxide displacement has become the most acknowledged and practical method in enhanced oil recovery system. This is because of its oil sweep efficiency and ability to reduce the level of greenhouse gas emission. Nevertheless, it would lead to the organic solid phase deposition, which causes the changes of the wettability and the damages of wellbores and reservoirs. In this study, we used slim tube test and component test to research the dynamic characteristics of displacement process. In addition, the mechanism of porous media blockage was also investigated. Results show that when the displacement pressure closed to the minimum miscibility pressure, reservoir blockage in pore throat could happen. Component test characterizes that during near miscible displacement process, the components of oil sample varied obviously, the variation range of peak component carbon marks fluctuated strongly. Crude oil component differentiation could happen after carbon dioxide fully contacted with oil. Besides, the rapid extraction mechanism of aromatic hydrocarbons played a significant role in this process under such condition. The reason is that the solubility of saturated hydrocarbons to asphaltene and non-hydrocarbons is obviously weaker than aromatic hydrocarbons. Controlling the pressure is considered as an important link to prevent the occurrence of blocking in the carbon dioxide multiphase and multicomponent displacement process.
文摘废电解铝阳极碳块经过高温碳化,通过盐酸-硝酸-高氯酸三酸溶解完全后,冷却,完全溶解盐类加入10 mL 1.19 g/mL的盐酸,在优选出最优的仪器工作状态下,创建了ICP-AES法测定废电解铝阳极碳块样品中Fe、Li、K、Ca、Mg的化学分析方法。每个元素的校准曲线相关系数均大于0.999,同时对以上多种元素进行检出限、加标回收试验研究,结果表明其相对标准偏差(n=8)为0.60%~2.24%,加标回收率在97.1%~104%。
文摘传统阴极炭块顶部是平坦的,阴极铝液流动时几乎没有阻力。使用表面凸起的阴极炭块进行研究,目的是增加铝电解槽中铝液流动的阻力,起到减波和减少铝液流动速度的作用,以此降低水平电流密度、阴极电压和铝液流速,保障铝电解槽生产安全稳定。通过COMSOL软件进行模拟,发现随着阴极炭块表面凸起块数的增加,阴极压降和水平电流密度均呈下降趋势,其中阴极压降最大降幅为39.8 mV,水平电流密度最大降幅为2087 A m^(2),并对某铝厂400 kA铝电解槽使用异形阴极炭块后进行测试,测试结果与模拟结果一致。
基金supported by the"CUG Scholar"scientific Research Funds at China University of Geosciences(Wuhan)(Project No.2020088)National Natural Science Foundation of China(No.41920104007)Opening Fund of State Key Laboratory of Fire Science,University of Science and Technology of China(No.HZ2023-KF03)。
文摘Waste-to-Energy treatment is a promising path to environment and energy management in the future.This work detailed a binary molten salt thermal treatment methodology for the detoxification of spent cathode carbon block(SCCB)waste and the recycling of carbonaceous materials.The thermal behavior of SCCB and SCCB blended with molten salts was investigated.It was found that the NaCl-Na_(2)CO_(3)binary molten salts significantly contributed to reducing pyrolysis onset temperature by 334.3 K compared to that of SCCB itself(i.e.,activation energy of pyrolysis reaction was reduced from 4.24×10^(5)to 2.30×10^(5)J/mol),thus helping to lower thermal treatment energy consumption.With the addition of binary molten salts,the residue after thermal treatment in a horizontal tube furnace experiment was separated into two layers.The bottom-layer residue was mainly composed of molten salts.The fluorine content in the form of NaF and CaF_(2)of top-layer residue was reduced significantly while the carbon content remained unchanged.Specifically,the leaching concentration of fluoride ion was decreased from 4620 mg/L to 856 mg/L.It is noted that the NaF and CaF_(2)can be removed through water-leaching and hydrothermal acid-leaching methods and thus the carbonaceous materials with a calorific value of 17.5 MJ/kg were obtained.
