Research progress and potential of new enhanced oil recovery methods in oilfield development

This paper reviews the basic research means for oilfield development and also the researches and tests of enhanced oil recovery(EOR)methods for mature oilfields and continental shale oil development,analyzes the problems of EOR methods,and proposes the relevant research prospects.The basic research means for oilfield development include in-situ acquisition of formation rock/fluid samples and non-destructive testing.The EOR methods for conventional and shale oil development are classified as improved water flooding(e.g.nano-water flooding),chemical flooding(e.g.low-concentration middle-phase micro-emulsion flooding),gas flooding(e.g.micro/nano bubble flooding),thermal recovery(e.g.air injection thermal-aided miscible flooding),and multi-cluster uniform fracturing/water-free fracturing,which are discussed in this paper for their mechanisms,approaches,and key technique researches and field tests.These methods have been studied with remarkable progress,and some achieved ideal results in field tests.Nonetheless,some problems still exist,such as inadequate research on mechanisms,imperfect matching technologies,and incomplete industrial chains.It is proposed to further strengthen the basic researches and expand the field tests,thereby driving the formation,promotion and application of new technologies.

CO_(2)storage with enhanced gas recovery(CSEGR):A review of experimental and numerical studies

CO_(2)emission mitigation is one of the most critical research frontiers.As a promising option of carbon capture,utilization and storage(CCUS),CO_(2)storage with enhanced gas recovery(CSEGR)can reduce CO_(2)emission by sequestrating it into gas reservoirs and simultaneously enhance natural gas production.Over the past decades,the displacement behaviour of CO_(2)—natural gas has been extensively studied and demonstrated to play a key role on both CO_(2)geologic storage and gas recovery performance.This work thoroughly and critically reviews the experimental and numerical simulation studies of CO_(2)displacing natural gas,along with both CSEGR research and demonstration projects at various scales.The physical property difference between CO_(2)and natural gas,especially density and viscosity,lays the foundation of CSEGR.Previous experiments on displacement behaviour and dispersion characteristics of CO_(2)/natural gas revealed the fundamental mixing characteristics in porous media,which is one key factor of gas recovery efficiency and warrants further study.Preliminary numerical simulations demonstrated that it is technically and economically feasible to apply CSEGR in depleted gas reservoirs.However,CO_(2)preferential flow pathways are easy to form(due to reservoir heterogeneity)and thus adversely compromise CSEGR performance.This preferential flow can be slowed down by connate or injected water.Additionally,the optimization of CO_(2)injection strategies is essential for improving gas recovery and CO_(2)storage,which needs further study.The successful K12—B pilot project provides insightful field-scale knowledge and experience,which paves a good foundation for commercial application.More experiments,simulations,research and demonstration projects are needed to facilitate the maturation of the CSEGR technology.

Investigation of flue gas water-alternating gas (flue gas–WAG) injection for enhanced oil recovery and multicomponent flue gas storage in the post-waterflooding reservoir

Flue gas fooding is one of the important technologies to improve oil recovery and achieve greenhouse gas storage.In order to study multicomponent fue gas storage capacity and enhanced oil recovery(EOR)performance of fue gas water-alternating gas(fue gas-WAG)injection after continuous waterfooding in an oil reservoir,a long core fooding system was built.The experimental results showed that the oil recovery factor of fue gas-WAG fooding was increased by 21.25%after continuous waterfooding and fue gas-WAG fooding could further enhance oil recovery and reduce water cut signifcantly.A novel material balance model based on storage mechanism was developed to estimate the multicomponent fue gas storage capacity and storage capacity of each component of fue gas in reservoir oil,water and as free gas in the post-waterfooding reservoir.The ultimate storage ratio of fue gas is 16%in the fue gas-WAG fooding process.The calculation results of fue gas storage capacity showed that the injection gas storage capacity mainly consists of N_(2) and CO_(2),only N_(2) exists as free gas phase in cores,and other components of injection gas are dissolved in oil and water.Finally,injection strategies from three perspectives for fue gas storage,EOR,and combination of fue gas storage and EOR were proposed,respectively.

Gas injection for enhanced oil recovery in two-dimensional geology-based physical model of Tahe fractured-vuggy carbonate reservoirs:karst fault system

Gas injection serves as a main enhanced oil recovery(EOR)method in fractured-vuggy carbonate reservoir,but its effect differs among single wells and multi-well groups because of the diverse fractured-vuggy configuration.Many researchers conducted experiments for the observation of fluid flow and the evaluation of production performance,while most of their physical models were fabricated based on the probability distribution of fractures and caves in the reservoir.In this study,a two-dimensional physical model of the karst fault system was designed and fabricated based on the geological model of TK748 well group in the seventh block of the Tahe Oilfield.The fluid flow and production performance of primary gas flooding were discussed.Gas-assisted gravity flooding was firstly introduced to take full use of gas-oil gravity difference,and its feasibility in the karst fault system was examined.Experimental results showed that primary gas flooding created more flow paths and achieved a remarkable increment of oil recovery compared to water flooding.Gas injection at a lower location was recommended to delay gas breakthrough.Gas-assisted gravity flooding achieved more stable gas-displacing-oil because oil production was at a lower location,and thus,the oil recovery was further enhanced.

Gas channeling control with an in-situ smart surfactant gel during water-alternating-CO_(2) enhanced oil recovery

Undesirable gas channeling always occurs along the high-permeability layers in heterogeneous oil reservoirs during water-alternating-CO_(2)(WAG)flooding,and conventional polymer gels used for blocking the“channeling”paths usually suffer from either low injectivity or poor gelation control.Herein,we for the first time developed an in-situ high-pressure CO_(2)-triggered gel system based on a smart surfactant,N-erucamidopropyl-N,N-dimethylamine(UC22AMPM),which was introduced into the aqueous slugs to control gas channeling inWAG processes.The water-like,low-viscosity UC22AMPM brine solution can be thickened by high-pressure CO_(2) owing to the formation of wormlike micelles(WLMs),as well as their growth and shear-induced structure buildup under shear flow.The thickening power can be further potentiated by the generation of denser WLMs resulting from either surfactant concentration augmentation or a certain range of heating,and can be impaired via pressurization above the critical pressure of CO_(2) because of its soaring solvent power.Core flooding tests using heterogeneous cores demonstrated that gas channeling was alleviated by plugging of high-capacity channels due to the in-situ gelation of UC22AMPM slugs upon their reaction with the pre-or post-injected CO_(2) slugs under shear flow,thereupon driving chase fluids into unrecovered low-permeability areas and producing an 8.0% higher oil recovery factor than the conventional WAG mode.This smart surfactant enabled high injectivity and satisfactory gelation control,attributable to low initial viscosity and the combined properties of one component and CO_(2)-triggered gelation,respectively.This work could provide a guide towards designing gels for reducing CO_(2) spillover and reinforcing the CO_(2) sequestration effect during CO_(2) enhanced oil recovery processes.

Coupled thermo-hydro-mechanical simulation of CO2 enhanced gas recovery with an extended equation of state module for TOUGH2MP-FLAC3D

As one of the most important ways to reduce the greenhouse gas emission,carbon dioxide（CO2）enhanced gas recovery（CO2-EGR） is attractive since the gas recovery can be enhanced simultaneously with CO2sequestration.Based on the existing equation of state（EOS） module of TOUGH2 MP,extEOS7C is developed to calculate the phase partition of H2O-CO2-CH4-NaCl mixtures accurately with consideration of dissolved NaCI and brine properties at high pressure and temperature conditions.Verifications show that it can be applied up to the pressure of 100 MPa and temperature of 150℃.The module was implemented in the linked simulator TOUGH2MP-FLAC3 D for the coupled hydro-mechanical simulations.A simplified three-dimensional（3D）1/4 model（2.2 km×1 km×1 km） which consists of the whole reservoir,caprock and baserock was generated based on the geological conditions of a gas field in the North German Basin.The simulation results show that,under an injection rate of 200,000 t/yr and production rate of 200,000 sm3/d,CO2breakthrough occurred in the case with the initial reservoir pressure of 5 MPa but did not occur in the case of 42 MPa.Under low pressure conditions,the pressure driven horizontal transport is the dominant process;while under high pressure conditions,the density driven vertical flow is dominant.Under the considered conditions,the CO2-EGR caused only small pressure changes.The largest pore pressure increase（2 MPa） and uplift（7 mm） occurred at the caprock bottom induced by only CO2injection.The caprock had still the primary stress state and its integrity was not affected.The formation water salinity and temperature variations of ±20℃ had small influences on the CO2-EGR process.In order to slow down the breakthrough,it is suggested that CO2-EGR should be carried out before the reservoir pressure drops below the critical pressure of CO2.

Advances in enhanced oil recovery technologies for low permeability reservoirs

Low permeability oil and gas resources are rich and have great potential all over the world, which has gradually become the main goal of oil and gas development. However, after traditional primary and secondary exploitation, there is still a large amount of remaining oil that has not been recovered.Therefore, in recent years, enhanced oil recovery(EOR) technologies for low permeability reservoirs have been greatly developed to further improve crude oil production. This study presents a comprehensive review of EOR technologies in low permeability reservoirs with an emphasis on gas flooding, surfactant flooding, nanofluid flooding and imbibition EOR technologies. In addition, two kinds of gel systems are introduced for conformance control in low permeability reservoirs with channeling problems. Finally,the technical challenges, directions and outlooks of EOR in low permeability reservoirs are addressed.

Co-optimization of carbon dioxide storage and enhanced oil recovery in oil reservoirs using a multi-objective genetic algorithm(NSGA-Ⅱ)

Climate researchers have observed that the carbon dioxide （CO2） concentration in the atmosphere have been growing significantly over the past century. CO2 from energy represents about 75% of the greenhouse gas （GHG） emissions for Annex B （Developed） countries, and over 60% of global emissions. Because of impermeable cap rocks hydrocarbon reservoirs are able to sequester CO〉 In addition, due to high-demand for oil worldwide, injection of CO2 is a useful way to enhance oil production. Hence, applying an efficient method to co-optimize CO2 storage and oil production is vital. Lack of suitable optimization techniques in the past led most multi-objective optimization problems to be tackled in the same way as a single objective optimization issue. However, there are some basic differences between the multi and single objective optimization methods. In this study, by using a non- dominated sorting genetic algorithm （NSGA-II） for an oil reservoir, some appropriate scenarios are proposed based on simultaneous gas storage and enhanced oil recovery optimization. The advantages of this method allow us to amend production scenarios after implementing the optimization process, by regarding the variation of economic parameters such as oil price and CO2 tax. This leads to reduced risks and time duration of making new decisions based on upcoming situations.

Performance of free gases during the recovery enhancement of shale gas by CO_(2) injection:a case study on the depleted Wufeng–Longmaxi shale in northeastern Sichuan Basin,China

In this work, a novel thermal–hydraulic–mechanical (THM) coupling model is developed, where the real geological parameters of the reservoir properties are embedded. Accordingly, nine schemes of CO_(2) injection well (IW) and CH_(4) production well (PW) are established, aiming to explore the behavior of free gases after CO_(2) is injected into the depleted Wufeng–Longmaxi shale. The results indicate the free CH4 or CO2 content in the shale fractures/matrix is invariably heterogeneous. The CO_(2) involvement facilitates the ratio of free CH_(4)/CO_(2) in the matrix to that in the fractures declines and tends to be stable with time. Different combinations of IW–PWs induce a difference in the ratio of the free CH4 to the free CO_(2), in the ratio of the free CH_(4)/CO_(2) in the matrix to that in the fractures, in the content of the recovered free CH_(4), and in the content of the trapped free CO_(2). Basically, when the IW locates at the bottom Wufeng–Longmaxi shale, a farther IW–PWs distance allows more CO2 in the free phase to be trapped;furthermore, no matter where the IW is, a shorter IW–PWs distance benefits by getting more CH_(4) in the free phase recovered from the depleted Wufeng–Longmaxi shale. Hopefully, this work is helpful in gaining knowledge about the shale-based CO_(2) injection technique.

Enhancing recovery and sensitivity studies in an unconventional tight gas condensate reservoir

The recovery factor from tight gas reservoirs is typically less than 15%, even with multistage hydrauhc tractunng stimulation. Such low recovery is exacerbated in tight gas condensate reservoirs, where the depletion of gas leaves the valuable condensate behind. In this paper, three enhanced gas recovery （EGR） methods including produced gas injection, CO2 injection and water injection are investigated to increase the well productivity for a tight gas condensate reservoir in the Montney Formation, Canada. The production performance of the three EGR methods is compared and their economic feasibility is evaluated. Sensitivity analysis of the key factors such as primary production duration, bottom-hole pressures, and fracture conductivity is conducted and their effects on the well production performance are analyzed. Results show that, compared with the simple depletion method, both the cumulative gas and condensate production increase with fluids injected. Produced gas injection leads to both a higher gas and condensate production compared with those of the CO2 injection, while waterflooding suffers from injection difficulty and the corresponding low sweep efficiency. Meanwhile, the injection cost is lower for the produced gas injection due to the on-site available gas source and minimal transport costs, gaining more economic benefits than the other EGR methods.

Technical strategies for effective development and gas recovery enhancement of a large tight gas field: A case study of Sulige gas field, Ordos Basin, NW China

Based on the analysis of influencing factors of tight gas recovery and reservoir geological characteristics, the types of remaining tight gas reserves in the Sulige gas field are summarized from the perspective of residual gas genesis to estimate residual gas reserves of different types and provide corresponding technical strategies for enhancing gas recovery. The residual gas reserves in the Sulige gas field can be divided into four types: well pattern uncontrollable, horizontal well missing, imperfect perforation, blocking zone in composite sandbodies. Among them, the uncontrolled remaining gas of well pattern and blocking zone in composite sandbodies are the main body for tapping potential and improving recovery factor, and well pattern infilling adjustment is the main means. Taking into account reservoir geological characteristics, production dynamic response and economic benefit requirements, four methods for infilling vertical well pattern, i.e., quantitative geological model method, dynamic controlled range of gas well method, production interference method and economic and technical index evaluation method, as well as a design method of combined vertical well pattern with horizontal well pattern are established. Under certain economic and technological conditions, the reasonable well pattern density of enrichment zone of gas field is proved to be 4 wells per square kilometers, which can increase the recovery rate of the gas field from 32% to about 50%. Meanwhile, five matching techniques for enhancing gas recovery aimed at interlayer undeveloped residual gas have been formed, including tapping potential of old wells, technological technology optimizing of new wells, rational production system optimizing, drainage and gas producing, and reducing waste production, which could increase the recovery rate for 5% based on well pattern infilling. The research results provide effective support for the long-term stable production of 230×108 m3/a of the Sulige gas field and production growth in the Changqing gas area.

An experimental and numerical study of chemically enhanced water alternating gas injection

In this work, an experimental study combined with numerical simulation was conducted to investigate the potential of chemically enhanced water alternating gas （CWAG） injection as a new enhanced oil recovery method. The unique feature of this new method is that it uses alkaline, surfactant, and polymer additives as a chemical slug which is injected during the water alternating gas （WAG） process to reduce the interfacial tension （IFT） and simultaneously improve the mobility ratio. In essence, the proposed CWAG process involves a combination of chemical flooding and immiscible carbon dioxide （CO2） injection and helps in IFT reduction, water blocking reduction, mobility control, oil swelling, and oil viscosity reduction due to CO2 dissolution. Its performance was compared with the conventional immiscible water alter- nating gas （I-WAG） flooding. Oil recovery utilizing CWAG was better by 26 % of the remaining oil in place after waterflooding compared to the recovery using WAG conducted under similar conditions. The coreflood data （cumulative oil and water production） were history mat- ched via a commercial simulator by adjusting the relative permeability curves and assigning the values of the rock and fluid properties such as porosity, permeability, and the experimentally determined IFT data. History matching ofthe coreflood model helped us optimize the experiments and was useful in determining the importance of the parameters influencing sweep efficiency in the CWAG process. The effectiveness of the CWAG process in pro- viding enhancement of displacement efficiency is evident in the oil recovery and pressure response observed in the coreflood. The results of sensitivity analysis on CWAG slug patterns show that the alkaline-surfactant-polymer injection is more beneficial after CO2 slug injection due to oil swelling and viscosity reduction. The CO2 slug size analysis shows that there is an optimum CO2 slug size, around 25 % pore volume which leads to a maximum oil recovery in the CWAG process. This study shows that the ultralow IFT system, i.e., IFT equaling 10 2 or 10 3 mN/ m, is a very important parameter in CWAG process since the water blocking effect can be minimized.

A reservoir drying method for enhancing recovery of tight gas

Based on the study of damage mechanisms of generalized water blocking and related water-blocking removal methods, the drying agents for enhancing tight gas reservoir recovery were developed, and the basic properties, injection mode and drying effect of the drying agents were evaluated. The chemical effect, thermal effect, salt resistance, salt resistance formulas and delay mechanism of the drying agent systems for different types of tight reservoirs were investigated through lab experiment. The solubility and solubilization properties of supercritical carbon dioxide on drying agent systems were tested.The injection mode of dissolving drying agent in supercritical carbon dioxide was proposed. The mechanisms of supercritical carbon dioxide with water in micropores of formation matrix were analyzed. Micro-pore structures and seepage characteristics of reservoir before and after drying were compared. Based on the characterization in combination of NMR and laser etched pore structure model, drying effects of the drying agents on bound water of different occurrences were evaluated qualitatively and quantitatively. Lattice Boltzmann method was used to evaluate the influence of drying effect on gas micro-seepage ability.The influence of drying effect on productivity and production performance of gas well was analyzed by numerical simulation.The drying effect can greatly reduce water saturation of tight reservoir and improve the gas seepage capacity in near wellbore and fractures. This work can provide guidance for developing new measures in enhancing recovery of tight gas reservoirs.

Enhancement of a foaming formulation with a zwitterionic surfactant for gas mobility control in harsh reservoir conditions

This work presents the design of a robust foam formulation that tolerates harsh reservoir conditions(high salinity,high divalent ion concentration,high temperature,light oil,and hydrocarbon injection gas)in a sandstone reservoir.For this,we selected anionic Alpha Olefin Sulfonate(AOS)surfactants and studied their synergistic effects in mixtures with zwitterionic betaines to enhance foam performance.The laboratory workflow used to define the best formulation followed a de-risking approach in three consecutive phases.First,(phase 1)the main surfactant(AOS)was selected among a series of commercial candidates in static conditions.Then,(phase 2)the betaine booster to be combined with the previously selected AOS was chosen and their ratio optimized in static conditions.Subsequently,(phase 3)the surfactant/booster ratio was optimized under dynamic conditions in a porous medium in the absence and the presence of oil.As a result of this study,a mixture of an AOS C14-C16 and cocamidopropyl hydroxysultaine(CAPHS)was selected as the one having the best performance.The designed formulation was proven to be robust in a wide range of conditions.It generated a strong and stable foam at reservoir conditions,overcoming variations in salinity and foam quality,and tolerated the presence of oil.

Chemical-assisted MMP reduction on methane-oil systems:Implications for natural gas injection to enhanced oil recovery

technique.However,the main challenge in this process is the high minimum miscibility pressure(MMP)between natural gas and crude oil,which limits its application and recovery factor,especially in hightemperature reservoirs.Therefore,we present a novel investigation to quantify the effect of chemicalassisted MMP reduction on the oil recovery factor.Firstly,we measured the interfacial tension(IFT)of the methane-oil system in the presence of chemical or CO_(2) to calculate the MMP reduction at a constant temperature(373K)using the vanishing interfacial tension(VIT)method.Afterwards,we performed three coreflooding experiments to quantify the effect of MMP reduction on the oil recovery factor under different injection scenarios.The interfacial tension measurements show that adding a small fraction(1.5 wt%)of the tested surfactant(SOLOTERRA ME-6)achieved 9%of MMP reduction,while adding 20 wt%of CO_(2) to the methane yields 13%of MMP reduction.Then,the coreflooding results highlight the significance of achieving miscibility during gas injection,as the ultimate recovery factor increased from 65.5%under immiscible conditions to 77.2%using chemical-assisted methane,and to 79%using gas mixture after achieving near miscible condition.The results demonstrate the promising potential of the MMP reduction to signifi-cantly increase the oil recovery factor during gas injection.Furthermore,these results will likely expand the application envelop of the miscible gas injection,in addition to the environmental benefits of utilizing the produced gas by re-injection/recycling instead of flaring which contributes to reducing the greenhouse gas emissions.

Application of supervised machine learning to predict the enhanced gas recovery by CO_(2) injection in shale gas reservoirs

The technique of Enhanced Gas Recovery by CO_(2) injection(CO_(2)-EGR)into shale reservoirs has brought increasing attention in the recent decade.CO_(2)-EGR is a complex geophysical process that is controlled by several parameters of shale properties and engineering design.Nevertheless,more challenges arise when simulating and predicting CO_(2)/CH4 displacement within the complex pore systems of shales.Therefore,the petroleum industry is in need of developing a cost-effective tool/approach to evaluate the potential of applying CO_(2) injection to shale reservoirs.In recent years,machine learning applications have gained enormous interest due to their high-speed performance in handling complex data and efficiently solving practical problems.Thus,this work proposes a solution by developing a supervised machine learning(ML)based model to preliminary evaluate CO_(2)-EGR efficiency.Data used for this work was drawn across a wide range of simulation sensitivity studies and experimental investigations.In this work,linear regression and artificial neural networks(ANNs)implementations were considered for predicting the incremental enhanced CH4.Based on the model performance in training and validation sets,our accuracy comparison showed that(ANNs)algorithms gave 15%higher accuracy in predicting the enhanced CH4 compared to the linear regression model.To ensure the model is more generalizable,the size of hidden layers of ANNs was adjusted to improve the generalization ability of ANNs model.Among ANNs models presented,ANNs of 100 hidden layer size gave the best predictive performance with the coefficient of determination(R2)of 0.78 compared to the linear regression model with R2 of 0.68.Our developed MLbased model presents a powerful,reliable and cost-effective tool which can accurately predict the incremental enhanced CH4 by CO_(2) injection in shale gas reservoirs.

Development characteristics and orientation of tight oil and gas in China

Through reviewing the development history of tight oil and gas in China,summarizing theoretical understandings in exploration and development,and comparing the geological conditions and development technologies objectively in China and the United States,we clarified the progress and stage of tight oil and gas exploration and development in China,and envisaged the future development orientation of theory and technology,process methods and development policy.In nearly a decade,relying on the exploration and development practice,science and technology research and management innovation,huge breakthroughs have been made.The laws of formation,distribution and accumulation of tight oil and gas have been researched,the development theories such as"multi-stage pressure drop"and"man-made reservoirs"have been established,and several technology series have been innovated and integrated.These technology series include enrichment regions selection,well pattern deployment,single well production and recovery factor enhancement,and low cost development.As a result,both of reserves and production of tight oil and gas increase rapidly.However,limited by the sedimentary environment and tectonic background,compared with North America,China’s tight oil and gas reservoirs are worse in continuity,more difficult to develop and poorer in economic efficiency.Moreover,there are still some gaps in reservoir identification accuracy and stimulating technology between China and North America.In the future,Chinese oil and gas companies should further improve the resource evaluation method,tackle key technologies such as high-precision 3D seismic interpretation,man-made reservoir,and intelligent engineering,innovate theories and technologies to enhance single well production and recovery rate,and actively endeavor to get the finance and tax subsidy on tight oil and gas.

Activating solution gas drive as an extra oil production mechanism after carbonated water injection

Enhanced oil recovery(EOR)methods are mostly based on different phenomena taking place at the interfaces between fluid–fluid and rock–fluid phases.Over the last decade,carbonated water injection(CWI)has been considered as one of the multi-objective EOR techniques to store CO2 in the hydrocarbon bearing formations as well as improving oil recovery efficiency.During CWI process,as the reservoir pressure declines,the dissolved CO2 in the oil phase evolves and gas nucleation phenomenon would occur.As a result,it can lead to oil saturation restoration and subsequently,oil displacement due to the hysteresis effect.At this condition,CO2 would act as insitu dissolved gas into the oil phase,and play the role of an artificial solution gas drive(SGD).In this study,the effect of SGD as an extra oil recovery mechanism after secondary and tertiary CWI(SCWI-TCWI)modes has been experimentally investigated in carbonate rocks using coreflood tests.The depressurization tests resulted in more than 25%and 18%of original oil in place(OOIP)because of the SGD after SCWI and TCWI tests,respectively.From the ultimate enhanced oil recovery point of view,the efficiency of SGD was observed to be more than one-third of that of CWI itself.Furthermore,the pressure drop data revealed that the system pressure depends more on the oil production pattern than water production.

CO_(2),N_(2),and CO_(2)/N_(2)mixed gas injection for enhanced shale gas recovery and CO_(2)geological storage

In this work,using fractured shale cores,isothermal adsorption experiments and core flooding tests were conducted to investigate the performance of injecting different gases to enhance shale gas recovery and CO_(2)geological storage efficiency under real reservoir conditions.The adsorption process of shale to different gases was in agreement with the extended-Langmuir model,and the adsorption capacity of CO_(2)was the largest,followed by CH_(4),and that of N_(2)was the smallest of the three pure gases.In addition,when the CO_(2)concentration in the mixed gas exceeded 50%,the adsorption capacity of the mixed gas was greater than that of CH4,and had a strong competitive adsorption effect.For the core flooding tests,pure gas injection showed that the breakthrough time of CO_(2)was longer than that of N_(2),and the CH_(4)recovery factor at the breakthrough time(Rch,)was also higher than that of N_(2).The RcH of CO_(2)gas injection was approximately 44.09%,while the RcH,of N_(2)was only 31.63%.For CO_(2)/N_(2)mixed gas injection,with the increase of CO_(2)concentration,the RcH,increased,and the RcH,for mixed gas CO_(2)/N_(2)=8:2 was close to that of pure CO_(2),about 40.24%.Moreover,the breakthrough time of N_(2)in mixed gas was not much different from that when pure N_(2)was injected,while the breakthrough time of CO_(2)was prolonged,which indicated that with the increase of N_(2)concentration in the mixed gas,the breakthrough time of CO_(2)could be extended.Furthermore,an abnormal surge of N_(2)concentration in the produced gas was observed after N_(2)breakthrough.In regards to CO_(2)storage efficiency(S_(Storage-CO_(2)),as the CO_(2)concentration increased,S storage-co_(2)also increased.The S storage-co_(2),of the pure CO_(2)gas injection was about 35.96%,while for mixed gas CO_(2)/N_(2)=8:2,S sorage-co,was about 32.28%.

A review of chemical-assisted minimum miscibility pressure reduction in CO_(2) injection for enhanced oil recovery

Miscible CO_(2)injection appears to be an important enhanced oil recovery technique for improving sweep efficiency and eliminating CO_(2)-oil interfacial tension resulting in up to 10%higher oil recovery compared to immiscible flooding,in addition to the environmental benefits of reducing greenhouse gas emissions through carbon capturing utilising and storage(CCUS).Moreover,this technique could be similarly applicable to natural gas and nitrogen projects to increase oil recovery and to reduce the associated gas flaring.However,miscible displacement may not be achievable for all reservoirs,in particular,reservoirs with high temperature where high injection pressure would be needed to reach miscibility which likely exceeds the formation fracture pressure.Therefore,to further achieve reservoirs’potential,there is a pressing need to explore a viable means to decrease the miscibility pressure,and thus expand the application envelop of miscible gas injection in reservoirs with high temperatures.In this work,we aim to provide insights into minimum miscibility pressure(MMP)reduction by adding chemicals into CO_(2)phase during injection.We achieved this objective by performing a comprehensive review on chemical-assisted MMP reduction using different chemical additives(e.g.,alcohols,fatty acids,surfactants)and different experimental methodologies.Previous experimental studies have shown that a fraction of chemical additives can yield up to 22%of MMP reduction in CO_(2)-oil system.Based on results analysis,surfactant based chemicals were found to be more efficient compared to alcohol based chemicals in reducing the interfacial tension in the CO_(2)-oil system.Based on the current experimental results,adding chemicals to improve the miscibility and reduce the MMP in the CO_(2)-oil system appears to be a promising technique to increase oil recovery while reducing operating cost.Selection of the effective chemical additives may help to expand the application of miscible gas injection to shallow and high temperature reservoirs.Furthermore,our review provides an overall framework to screen potential chemical additives and an injection strategy to be used for miscible displacement in CO_(2)and/or gas systems.